As many of you know that kprobes exist in the main line kernel for various
architecture including i386, x86_64, ppc64 and sparc64.  Attached patches
following this mail are a port of Kprobes and Jprobes for IA64.

I have tesed this patches for kprobes and Jprobes and this seems to work fine.
 I have tested this patch by inserting kprobes on various slots and various
templates including various types of branch instructions.

I have also tested this patch using the tool
http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the
kprobes for IA64 works great.

Here is list of TODO things and pathes for the same will appear soon.

1) Support kprobes on "mov r1=ip" type of instruction
2) Support Kprobes and Jprobes to exist on the same address
3) Support Return probes
3) Architecture independent cleanup of kprobes

This patch adds the kdebug die notification mechanism needed by Kprobes.

For break instruction on Branch type slot, imm21 is ignored and value
zero is placed in IIM register, hence we need to handle kprobes
for switch case zero.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NRusty Lynch <Rusty.lynch@intel.com>

From: Rusty Lynch <rusty.lynch@intel.com>

At the point in traps.c where we recieve a break with a zero value, we can
not say if the break was a result of a kprobe or some other debug facility.

This simple patch changes the informational string to a more correct "break
0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes
patches that were just recently included for the next mm cut.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch moves the lock/unlock of the arch specific kprobe_flush_task()
to the non-arch specific kprobe_flusk_task().
Signed-off-by: NHien Nguyen <hien@us.ibm.com>
Acked-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The architecture independent code of the current kprobes implementation is
arming and disarming kprobes at registration time.  The problem is that the
code is assuming that arming and disarming is a just done by a simple write
of some magic value to an address.  This is problematic for ia64 where our
instructions look more like structures, and we can not insert break points
by just doing something like:

*p->addr = BREAKPOINT_INSTRUCTION;

The following patch to 2.6.12-rc4-mm2 adds two new architecture dependent
functions:

     * void arch_arm_kprobe(struct kprobe *p)
     * void arch_disarm_kprobe(struct kprobe *p)

and then adds the new functions for each of the architectures that already
implement kprobes (spar64/ppc64/i386/x86_64).

I thought arch_[dis]arm_kprobe was the most descriptive of what was really
happening, but each of the architectures already had a disarm_kprobe()
function that was really a "disarm and do some other clean-up items as
needed when you stumble across a recursive kprobe." So...  I took the
liberty of changing the code that was calling disarm_kprobe() to call
arch_disarm_kprobe(), and then do the cleanup in the block of code dealing
with the recursive kprobe case.

So far this patch as been tested on i386, x86_64, and ppc64, but still
needs to be tested in sparc64.
Signed-off-by: NRusty Lynch <rusty.lynch@intel.com>
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch adds the x86_64 architecture specific implementation
for function return probes.

Function return probes is a mechanism built on top of kprobes that allows
a caller to register a handler to be called when a given function exits.
For example, to instrument the return path of sys_mkdir:

static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs)
{
	printk("sys_mkdir exited\n");
	return 0;
}
static struct kretprobe return_probe = {
	.handler = sys_mkdir_exit,
};

<inside setup function>

return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir");
if (register_kretprobe(&return_probe)) {
	printk(KERN_DEBUG "Unable to register return probe!\n");
	/* do error path */
}

<inside cleanup function>
unregister_kretprobe(&return_probe);

The way this works is that:

* At system initialization time, kernel/kprobes.c installs a kprobe
  on a function called kretprobe_trampoline() that is implemented in
  the arch/x86_64/kernel/kprobes.c  (More on this later)

* When a return probe is registered using register_kretprobe(),
  kernel/kprobes.c will install a kprobe on the first instruction of the
  targeted function with the pre handler set to arch_prepare_kretprobe()
  which is implemented in arch/x86_64/kernel/kprobes.c.

* arch_prepare_kretprobe() will prepare a kretprobe instance that stores:
  - nodes for hanging this instance in an empty or free list
  - a pointer to the return probe
  - the original return address
  - a pointer to the stack address

  With all this stowed away, arch_prepare_kretprobe() then sets the return
  address for the targeted function to a special trampoline function called
  kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c

* The kprobe completes as normal, with control passing back to the target
  function that executes as normal, and eventually returns to our trampoline
  function.

* Since a kprobe was installed on kretprobe_trampoline() during system
  initialization, control passes back to kprobes via the architecture
  specific function trampoline_probe_handler() which will lookup the
  instance in an hlist maintained by kernel/kprobes.c, and then call
  the handler function.

* When trampoline_probe_handler() is done, the kprobes infrastructure
  single steps the original instruction (in this case just a top), and
  then calls trampoline_post_handler().  trampoline_post_handler() then
  looks up the instance again, puts the instance back on the free list,
  and then makes a long jump back to the original return instruction.

So to recap, to instrument the exit path of a function this implementation
will cause four interruptions:

  - A breakpoint at the very beginning of the function allowing us to
    switch out the return address
  - A single step interruption to execute the original instruction that
    we replaced with the break instruction (normal kprobe flow)
  - A breakpoint in the trampoline function where our instrumented function
    returned to
  - A single step interruption to execute the original instruction that
    we replaced with the break instruction (normal kprobe flow)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds function-return probes to kprobes for the i386
architecture.  This enables you to establish a handler to be run when a
function returns.

1. API

Two new functions are added to kprobes:

	int register_kretprobe(struct kretprobe *rp);
	void unregister_kretprobe(struct kretprobe *rp);

2. Registration and unregistration

2.1 Register

  To register a function-return probe, the user populates the following
  fields in a kretprobe object and calls register_kretprobe() with the
  kretprobe address as an argument:

  kp.addr - the function's address

  handler - this function is run after the ret instruction executes, but
  before control returns to the return address in the caller.

  maxactive - The maximum number of instances of the probed function that
  can be active concurrently.  For example, if the function is non-
  recursive and is called with a spinlock or mutex held, maxactive = 1
  should be enough.  If the function is non-recursive and can never
  relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should
  be enough.  maxactive is used to determine how many kretprobe_instance
  objects to allocate for this particular probed function.  If maxactive <=
  0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 *
  NR_CPUS) else maxactive=NR_CPUS)

  For example:

    struct kretprobe rp;
    rp.kp.addr = /* entrypoint address */
    rp.handler = /*return probe handler */
    rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */
    register_kretprobe(&rp);

  The following field may also be of interest:

  nmissed - Initialized to zero when the function-return probe is
  registered, and incremented every time the probed function is entered but
  there is no kretprobe_instance object available for establishing the
  function-return probe (i.e., because maxactive was set too low).

2.2 Unregister

  To unregiter a function-return probe, the user calls
  unregister_kretprobe() with the same kretprobe object as registered
  previously.  If a probed function is running when the return probe is
  unregistered, the function will return as expected, but the handler won't
  be run.

3. Limitations

3.1 This patch supports only the i386 architecture, but patches for
    x86_64 and ppc64 are anticipated soon.

3.2 Return probes operates by replacing the return address in the stack
    (or in a known register, such as the lr register for ppc).  This may
    cause __builtin_return_address(0), when invoked from the return-probed
    function, to return the address of the return-probes trampoline.

3.3 This implementation uses the "Multiprobes at an address" feature in
    2.6.12-rc3-mm3.

3.4 Due to a limitation in multi-probes, you cannot currently establish
    a return probe and a jprobe on the same function.  A patch to remove
    this limitation is being tested.

This feature is required by SystemTap (http://sourceware.org/systemtap),
and reflects ideas contributed by several SystemTap developers, including
Will Cohen and Ananth Mavinakayanahalli.
Signed-off-by: NHien Nguyen <hien@us.ibm.com>
Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@laposte.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use lookup_one_len instead of opencoding a simplified lookup using
lookup_hash with a fake hash.

Also there's no need anymore for the d_invalidate as we have a completely
valid dentry now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move some code duplicated in both callers into vfs_quota_on_mount
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NJan Kara <jack@ucw.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Prevent recursive faults in do_exit() by leaving the task alone and wait
for reboot.  This may allow a more graceful shutdown and possibly save the
original oops.
Signed-off-by: NAlexander Nyberg <alexn@telia.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Various filesystem drivers have grown a get_dentry() function that's a
duplicate of lookup_one_len, except that it doesn't take a maximum length
argument and doesn't check for \0 or / in the passed in filename.

Switch all these places to use lookup_one_len.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Greg KH <greg@kroah.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch to add check to get_chrdev_list and get_blkdev_list to prevent reads
of /proc/devices from spilling over the provided page if more than 4096
bytes of string data are generated from all the registered character and
block devices in a system
Signed-off-by: NNeil Horman <nhorman@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes redundant VM_ClearReadHint from mm/madvice.c which was
left there by Prasanna's patch.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In kernel/sched.c the return value from preempt_count() is cast to an int.
That made sense when preempt_count was defined as different types on is not
needed and should go away.  The patch removes the cast.

In kernel/timer.c the return value from preempt_count() is assigned to a
variable of type u32 and then that unsigned value is later compared to
preempt_count().  Since preempt_count() returns an int, an int is what
should be used to store its return value.  Storing the result in an
unsigned 32bit integer made a tiny bit of sense back when preempt_count was
different types on different archs, but no more - let's not play signed vs
unsigned comparison games when we don't have to.  The patch modifies the
code to use an int to hold the value.  While I was around that bit of code
I also made two changes to a nearby (related) printk() - I modified it to
specify the loglevel explicitly and also broke the line into a few pieces
to avoid it being longer than 80 chars and clarified the text a bit.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The preempt_count member of struct thread_info is currently either defined
as int, unsigned int or __s32 depending on arch.  This patch makes the type
of preempt_count an int on all archs.

Having preempt_count be an unsigned type prevents the catching of
preempt_count < 0 bugs, and using int on some archs and __s32 on others is
not exactely "neat" - much nicer when it's just int all over.

A previous version of this patch was already ACK'ed by Robert Love, and the
only change in this version of the patch compared to the one he ACK'ed is
that this one also makes sure the preempt_count member is consistently
commented.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Looks like locking can be optimised quite a lot.  Increase lock widths
slightly so lo_lock is taken fewer times per request.  Also it was quite
trivial to cover lo_pending with that lock, and remove the atomic
requirement.  This also makes memory ordering explicitly correct, which is
nice (not that I particularly saw any mem ordering bugs).

Test was reading 4 250MB files in parallel on ext2-on-tmpfs filesystem (1K
block size, 4K page size).  System is 2 socket Xeon with HT (4 thread).

intel:/home/npiggin# umount /dev/loop0 ; mount /dev/loop0 /mnt/loop ; /usr/bin/time ./mtloop.sh

Before:
0.24user 5.51system 0:02.84elapsed 202%CPU (0avgtext+0avgdata 0maxresident)k
0.19user 5.52system 0:02.88elapsed 198%CPU (0avgtext+0avgdata 0maxresident)k
0.19user 5.57system 0:02.89elapsed 198%CPU (0avgtext+0avgdata 0maxresident)k
0.22user 5.51system 0:02.90elapsed 197%CPU (0avgtext+0avgdata 0maxresident)k
0.19user 5.44system 0:02.91elapsed 193%CPU (0avgtext+0avgdata 0maxresident)k

After:
0.07user 2.34system 0:01.68elapsed 143%CPU (0avgtext+0avgdata 0maxresident)k
0.06user 2.37system 0:01.68elapsed 144%CPU (0avgtext+0avgdata 0maxresident)k
0.06user 2.39system 0:01.68elapsed 145%CPU (0avgtext+0avgdata 0maxresident)k
0.06user 2.36system 0:01.68elapsed 144%CPU (0avgtext+0avgdata 0maxresident)k
0.06user 2.42system 0:01.68elapsed 147%CPU (0avgtext+0avgdata 0maxresident)k
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

According to include/linux/console.h, CON_CONSDEV flag should be set on
the last console specified on the boot command line:

     86 #define CON_PRINTBUFFER (1)
     87 #define CON_CONSDEV     (2) /* Last on the command line */
     88 #define CON_ENABLED     (4)
     89 #define CON_BOOT        (8)

This does not currently happen if there is more than one console specified
on the boot commandline.  Instead, it gets set on the first console on the
command line.  This can cause problems for things like kdb that look for
the CON_CONSDEV flag to see if the console is valid.

Additionaly, it doesn't look like CON_CONSDEV is reassigned to the next
preferred console at unregister time if the console being unregistered
currently has that bit set.

Example (from sn2 ia64):

elilo vmlinuz root=<dev> console=ttyS0 console=ttySG0

in this case, the flags on ttySG console struct will be 0x4 (should be
0x6).

Attached patch against bk fixes both issues for the cases I looked at.  It
uses selected_console (which gets incremented for each console specified on
the command line) as the indicator of which console to set CON_CONSDEV on.
When adding the console to the list, if the previous one had CON_CONSDEV
set, it masks it out.  Tested on ia64 and x86.

The problem with the current behavior is it breaks overriding the default from
the boot line.  In the ia64 case, there may be a global append line defining
console=a in elilo.conf.  Then you want to boot your kernel, and want to
override the default by passing console=b on the boot line.  elilo constructs
the kernel cmdline by starting with the value of the global append line, then
tacks on whatever else you specify, which puts console=b last.
Signed-off-by: NGreg Edwards <edwardsg@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert a bunch of strdup() implementations and their callers to the new
kstrdup().  A few remain, for example see sound/core, and there are tons of
open coded strdup()'s around.  Sigh.  But this is a start.
Signed-off-by: NRobert Love <rml@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch creates a new kstrdup library function and changes the "local"
implementations in several places to use this function.

Most of the changes come from the sound and net subsystems.  The sound part
had already been acknowledged by Takashi Iwai and the net part by David S.
Miller.

I left UML alone for now because I would need more time to read the code
carefully before making changes there.
Signed-off-by: NPaulo Marques <pmarques@grupopie.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Based on analysis and a patch from Russ Weight <rweight@us.ibm.com>

There is a race condition that can occur if an inode is allocated and then
released (using iput) during the ->fill_super functions.  The race
condition is between kswapd and mount.

For most filesystems this can only happen in an error path when kswapd is
running concurrently.  For isofs, however, the error can occur in a more
common code path (which is how the bug was found).

The logic here is "we want final iput() to free inode *now* instead of
letting it sit in cache if fs is going down or had not quite come up".  The
problem is with kswapd seeing such inodes in the middle of being killed and
happily taking over.

The clean solution would be to tell kswapd to leave those inodes alone and
let our final iput deal with them.  I.e.  add a new flag
(I_FORCED_FREEING), set it before write_inode_now() there and make
prune_icache() leave those alone.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sys_timer_settime/sys_timer_delete needs to delete k_itimer->real.timer
synchronously while holding ->it_lock, which is also locked in
posix_timer_fn.

This patch removes timer_active/set_timer_inactive which plays with
timer_list's internals in favour of using try_to_del_timer_sync(), which
was introduced in the previous patch.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch splits del_timer_sync() into 2 functions.  The new one,
try_to_del_timer_sync(), returns -1 when it hits executing timer.

It can be used in interrupt context, or when the caller hold locks which
can prevent completion of the timer's handler.

NOTE.  Currently it can't be used in interrupt context in UP case, because
->running_timer is used only with CONFIG_SMP.

Should the need arise, it is possible to kill #ifdef CONFIG_SMP in
set_running_timer(), it is cheap.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch tries to solve following problems:

1. del_timer_sync() is racy. The timer can be fired again after
   del_timer_sync have checked all cpus and before it will recheck
   timer_pending().

2. It has scalability problems. All cpus are scanned to determine
   if the timer is running on that cpu.

   With this patch del_timer_sync is O(1) and no slower than plain
   del_timer(pending_timer), unless it has to actually wait for
   completion of the currently running timer.

   The only restriction is that the recurring timer should not use
   add_timer_on().

3. The timers are not serialized wrt to itself.

   If CPU_0 does mod_timer(jiffies+1) while the timer is currently
   running on CPU 1, it is quite possible that local interrupt on
   CPU_0 will start that timer before it finished on CPU_1.

4. The timers locking is suboptimal. __mod_timer() takes 3 locks
   at once and still requires wmb() in del_timer/run_timers.

   The new implementation takes 2 locks sequentially and does not
   need memory barriers.

Currently ->base != NULL means that the timer is pending. In that case
->base.lock is used to lock the timer. __mod_timer also takes timer->lock
because ->base can be == NULL.

This patch uses timer->entry.next != NULL as indication that the timer is
pending. So it does __list_del(), entry->next = NULL instead of list_del()
when the timer is deleted.

The ->base field is used for hashed locking only, it is initialized
in init_timer() which sets ->base = per_cpu(tvec_bases). When the
tvec_bases.lock is locked, it means that all timers which are tied
to this base via timer->base are locked, and the base itself is locked
too.

So __run_timers/migrate_timers can safely modify all timers which could
be found on ->tvX lists (pending timers).

When the timer's base is locked, and the timer removed from ->entry list
(which means that _run_timers/migrate_timers can't see this timer), it is
possible to set timer->base = NULL and drop the lock: the timer remains
locked.

This patch adds lock_timer_base() helper, which waits for ->base != NULL,
locks the ->base, and checks it is still the same.

__mod_timer() schedules the timer on the local CPU and changes it's base.
However, it does not lock both old and new bases at once. It locks the
timer via lock_timer_base(), deletes the timer, sets ->base = NULL, and
unlocks old base. Then __mod_timer() locks new_base, sets ->base = new_base,
and adds this timer. This simplifies the code, because AB-BA deadlock is not
possible. __mod_timer() also ensures that the timer's base is not changed
while the timer's handler is running on the old base.

__run_timers(), del_timer() do not change ->base anymore, they only clear
pending flag.

So del_timer_sync() can test timer->base->running_timer == timer to detect
whether it is running or not.

We don't need timer_list->lock anymore, this patch kills it.

We also don't need barriers. del_timer() and __run_timers() used smp_wmb()
before clearing timer's pending flag. It was needed because __mod_timer()
did not lock old_base if the timer is not pending, so __mod_timer()->list_add()
could race with del_timer()->list_del(). With this patch these functions are
serialized through base->lock.

One problem. TIMER_INITIALIZER can't use per_cpu(tvec_bases). So this patch
adds global

        struct timer_base_s {
                spinlock_t lock;
                struct timer_list *running_timer;
        } __init_timer_base;

which is used by TIMER_INITIALIZER. The corresponding fields in tvec_t_base_s
struct are replaced by struct timer_base_s t_base.

It is indeed ugly. But this can't have scalability problems. The global
__init_timer_base.lock is used only when __mod_timer() is called for the first
time AND the timer was compile time initialized. After that the timer migrates
to the local CPU.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NRenaud Lienhart <renaud.lienhart@free.fr>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

get_request_wait needn't unplug the device immediately.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sprinkle around a few branch hints in the block layer.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This memory barrier is not needed because the waitqueue will only get waiters
on it in the following situations:

rq->count has exceeded the threshold - however all manipulations of ->count
are performed under the runqueue lock, and so we will correctly pick up any
waiter.

Memory allocation for the request fails.  In this case, there is no additional
help provided by the memory barrier.  We are guaranteed to eventually wake up
waiters because the request allocation mempool guarantees that if the mem
allocation for a request fails, there must be some requests in flight.  They
will wake up waiters when they are retired.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add KERN_ERR and __FUNCTION__ to generic tag error messages, and add a comment
in blk_queue_end_tag() which explains the silent failure path.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Replace BLK_TAGS_PER_LONG with BITS_PER_LONG and remove unused BLK_TAGS_MASK.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

blk_queue_tag->real_max_depth was used to optimize out unnecessary
allocations/frees on tag resize.  However, the whole thing was very broken -
tag_map was never allocated to real_max_depth resulting in access beyond the
end of the map, bits in [max_depth..real_max_depth] were set when initializing
a map and copied when resizing resulting in pre-occupied tags.

As the gain of the optimization is very small, well, almost nill, remove the
whole thing.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

blk_queue_start_tag() hand-coded searching for the first zero bit in the tag
map.  Replace it with find_first_zero_bit().  With this patch,
blk_queue_star_tag() doesn't need to fill remains of tag map with 1, thus
allowing it to work properly with the next remove_real_max_depth patch.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Acked-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Assignment doesn't make much sense here as condition would always be true.
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make use of the user_mode macro where it's possible.  This is useful for Xen
because it will need only to redefine only the macro to a hypervisor call.
Signed-off-by: NVincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add 2 macros to set and get debugreg on x86_64.  This is useful for Xen
because it will need only to redefine each macro to a hypervisor call.
Signed-off-by: NVincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use the user_mode macro where it's possible.
Signed-off-by: NVincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Rename user_mode to user_mode_vm and add a user_mode macro similar to the
x86-64 one.

This is useful for Xen because the linux xen kernel does not runs on the same
priviledge that a vanilla linux kernel, and with this we just need to redefine
user_mode().
Signed-off-by: NVincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make use of the 2 new macro set_debugreg and get_debugreg.
Signed-off-by: NVincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add 2 macros to set and get debugreg on x86.  This is useful for Xen because
it will need only to redefine each macro to a hypervisor call.
Signed-off-by: NVincent Hanquez <vincent.hanquez@cl.cam.ac.uk>
Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I suggest to change the way IRQs are handed out to PCI devices.

Currently, each I/O APIC pin gets associated with an IRQ, no matter if the
pin is used or not.  It is expected that each pin can potentually be
engaged by a device inserted into the corresponding PCI slot.  However,
this imposes severe limitation on systems that have designs that employ
many I/O APICs, only utilizing couple lines of each, such as P64H2 chipset.

It is used in ES7000, and currently, there is no way to boot the system
with more that 9 I/O APICs.

The simple change below allows to boot a system with say 64 (or more) I/O
APICs, each providing 1 slot, which otherwise impossible because of the IRQ
gaps created for unused lines on each I/O APIC.  It does not resolve the
problem with number of devices that exceeds number of possible IRQs, but
eases up a tension for IRQs on any large system with potentually large
number of devices.

I only implemented this for the ACPI boot, since if the system is this big
and using newer chipsets it is probably (better be!) an ACPI based system
:).  The change is completely "mechanical" and does not alter any internal
structures or interrupt model/implementation.  The patch works for both
i386 and x86_64 archs.  It works with MSIs just fine, and should not
intervene with implementations like shared vectors, when they get worked
out and incorporated.

To illustrate, below is the interrupt distribution for 2-cell ES7000 with
20 I/O APICs, and an Ethernet card in the last slot, which should be eth1
and which was not configured because its IRQ exceeded allowable number (it
actially turned out huge - 480!):

zorro-tb2:~ # cat /proc/interrupts
           CPU0       CPU1       CPU2       CPU3       CPU4       CPU5       CPU6       CPU7
  0:      65716      30012      30007      30002      30009      30010      30010      30010    IO-APIC-edge  timer
  4:        373          0        725        280          0          0          0          0    IO-APIC-edge  serial
  8:          0          0          0          0          0          0          0          0    IO-APIC-edge  rtc
  9:          0          0          0          0          0          0          0          0   IO-APIC-level  acpi
 14:         39          3          0          0          0          0          0          0    IO-APIC-edge  ide0
 16:        108         13          0          0          0          0          0          0   IO-APIC-level  uhci_hcd:usb1
 18:          0          0          0          0          0          0          0          0   IO-APIC-level  uhci_hcd:usb3
 19:         15          0          0          0          0          0          0          0   IO-APIC-level  uhci_hcd:usb2
 23:          3          0          0          0          0          0          0          0   IO-APIC-level  ehci_hcd:usb4
 96:       4240        397         18          0          0          0          0          0   IO-APIC-level  aic7xxx
 97:         15          0          0          0          0          0          0          0   IO-APIC-level  aic7xxx
192:        847          0          0          0          0          0          0          0   IO-APIC-level  eth0
NMI:          0          0          0          0          0          0          0          0
LOC:     273423     274528     272829     274228     274092     273761     273827     273694
ERR:          7
MIS:          0

Even though the system doesn't have that many devices, some don't get
enabled only because of IRQ numbering model.

This is the IRQ picture after the patch was applied:

zorro-tb2:~ # cat /proc/interrupts
           CPU0       CPU1       CPU2       CPU3       CPU4       CPU5       CPU6       CPU7
  0:      44169      10004      10004      10001      10004      10003      10004       6135    IO-APIC-edge  timer
  4:        345          0          0          0          0        244          0          0    IO-APIC-edge  serial
  8:          0          0          0          0          0          0          0          0    IO-APIC-edge  rtc
  9:          0          0          0          0          0          0          0          0   IO-APIC-level  acpi
 14:         39          0          3          0          0          0          0          0    IO-APIC-edge  ide0
 17:       4425          0          9          0          0          0          0          0   IO-APIC-level  aic7xxx
 18:         15          0          0          0          0          0          0          0   IO-APIC-level  aic7xxx, uhci_hcd:usb3
 21:        231          0          0          0          0          0          0          0   IO-APIC-level  uhci_hcd:usb1
 22:         26          0          0          0          0          0          0          0   IO-APIC-level  uhci_hcd:usb2
 23:          3          0          0          0          0          0          0          0   IO-APIC-level  ehci_hcd:usb4
 24:        348          0          0          0          0          0          0          0   IO-APIC-level  eth0
 25:          6        192          0          0          0          0          0          0   IO-APIC-level  eth1
NMI:          0          0          0          0          0          0          0          0
LOC:     107981     107636     108899     108698     108489     108326     108331     108254
ERR:          7
MIS:          0

Not only we see the card in the last I/O APIC, but we are not even close to
using up available IRQs, since we didn't waste any.
Signed-off-by: NNatalie Protasevich <Natalie.Protasevich@unisys.com>
Acked-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Eliminate duplicate definition of rdpmc in x86-64's mtrr.h.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is the x86_64 version of the signal fix I just posted for i386.

This problem was first noticed on PPC and has already been fixed there.
But the exact same issue applies to other platforms in the same way.  The
signal blocking for sa_mask and the handled signal takes place after the
handler setup.  When the stack is bogus, the handler setup forces a
SIGSEGV.  But then this will be blocked, and returning to user mode will
fault again and iterate.  This patch fixes the problem by checking whether
signal handler setup failed, and not doing the signal-blocking if so.  This
copies what was done in the ppc code.  I think all architectures' signal
handler setup code follows this pattern and needs the change.
Signed-off-by: NRoland McGrath <roland@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently the x86-64 HPET code assumes the entire HPET implementation from
the spec is present.  This breaks on boxes that do not implement the
optional legacy timer replacement functionality portion of the spec.

This patch fixes this issue, allowing x86-64 systems that cannot use the
HPET for the timer interrupt and RTC to still use the HPET as a time
source.  I've tested this patch on a system systems without HPET, with HPET
but without legacy timer replacement, as well as HPET with legacy timer
replacement.

This version adds a minor check to cap the HPET counter value in
gettimeoffset_hpet to avoid possible time inconsistencies.  Please ignore
the A2 version I sent to you earlier.
Acked-by: NAndi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>