- 10 9月, 2006 2 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks The IRQ_EINT0 through IRQ_EINT3 handling has changed on the S3C2412 from the previous SoCs in the range, and thus we need to add code to handle this. The changes come about due to these IRQs being displayed in two different registers, and needing to be acked and masked in both. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The s3c244x-irq.c code makes the mistake of adding the same drive to two different sys-classes. This causes the class lists to become corrupted and the suspend code to OOPS. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 9月, 2006 2 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks It turns out we have both SMDK2413 and S3C2413 for the same board. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Remove the pointless changelog comments from arch/arm/mach-s3c2410 files, as all this can be found from the revision control system. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 31 8月, 2006 1 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks The type naming in the s3c24xx dma code is riddled with typedefs creating _t types, from the code import from 2.4 which is contrary to the current Kernel coding style. This patch cleans this up, removing the typedefs and and fixing up the resultant code changes. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 8月, 2006 2 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks tidy up the makefile by using TABs to indent, and ensure that all items are indented the same. Move the DMA to its own section, ready for the next set of updates Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks A number of small issues with the S3C24XX DMA have cropped up, which this patch fixes. These are: - check wether we can load another buff in start - update state handling in s3c2410_dma_lastxfer - only reload in irq if channel is not idle - more informative timeout errors (add source) - do not call request_irq() with irqs locked - added waitforstop function The patch also adds a S3C2410_DMAOP_STARTED for the occasions when the driver wants to ensure that the DMA system load state is resynced after loading. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 7月, 2006 2 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Remove unused IDE static mapping, now being ioremap()d by the simtec IDE driver. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Tidy the syntax, such as missing ,'s on the end of struct entries, in the Osiris and Anubis machines. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 03 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
Patch from Thomas Gleixner From: Thomas Gleixner <tglx@linutronix.de> Fixup the conversion to generic irq subsystem. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 29 6月, 2006 1 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks The S3C2440 and S3C2442 have an extended USB gadget controller, so re-name the platform device to inform the driver that it needs to change some parameters Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 26 6月, 2006 1 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Make CPU uppercase on the SMDK2440 KConfig entries-- Signed-off-by: NBen Dooks <ben-linux@fluff.org>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 25 6月, 2006 11 次提交
-
-
由 Russell King 提交于
DEFAULT_FIQ was entirely unused. MODE_* are just redefinitions of *_MODE. Use *_MODE instead. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Enable power management for Simtec Osiris Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Move the decoding of the IRQ_EXT4 and above out of the entry macro, and into an chained irq handler as the EXTINT registers move depending on the CPU being used. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Make the S3C2410 use the same usb clock naming as the S3C2412 Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Add basic support for the Samsung/Aiji SMDK2413 Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The current S3C2412 has used to moving S3C24XX_ for the generic form of an register has been moved from the S3C2410. Fixup S3C2410_EXTINTx and S3C2410_EINFLTx to S3C24XX_EXTINTx and S3C24XX_EXTINTx Depends on Patch #3635/1, Patch #3640/1 Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The current S3C2412 support has moved to using S3C24XX_DCLKCON unless the specific DCLKCON is required (S3C2412_DCLKCON or S3C2410_DKCLKCON) Move the few places using S3C2410_DCLKCON to S3C24XX_DCLKCON Depends on Patch #3635/1 Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Clock support for the clocks on the Samsung S3C2412 and S3C2413 SoCs. This provides clock enables and parent selection for all the standard clocks. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Update the clocks with the MPLL clock, and use it as the parent. Also export these to the rest of arch/arm/mach-s3c2410 Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Add support for the Samsung S3C2412 and S3C2413 range of SoCs. This patch contains the core identification, debug macros, and basic register updates to get these to build. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The s3c2410 gpio functions have a pair of bugs where the code is using the pin function definitions instead of the pin gpio numbers. Also remove the changelog Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 23 6月, 2006 3 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Add a get_rate call to allow an given clock to over-ride the clk_get_rate() call. This provides support for clocks which rely on division of their parent to correctly report their frequency when the parent can also change. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Split the s3c2410 specific clocks from the core clock code, as part of the work to support more of the Samsung line of SoCs. The patch does not use the sysdev mechanism as the clocks are needed for the timer init, which is very early in the kernel init sequence. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The S3C2440 and S3C2442 both have their own sysdev and sysclass for differentiating them from the currently default S3C2410. Add a sysdev for the S3C2410 as part of the work to make the code be non-dependant on the S3C2410. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 20 6月, 2006 1 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Platform device definitions for the two IDE ports on the Simtec Anubis board. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 6月, 2006 3 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Core support for the Samsung S3C2442, and the serial port driver update to allow the serial port blocks to be used. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks All the S3C24XX based devices currently have similar uart blocks, in the same location. Make the process of adding new uart blocks easier by commonising the device definitions and adding a new init function for the cpu code. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Platform devices for the LEDs on all the SMDK24XX boards Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 6月, 2006 3 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Move the printk of the CPU information and IDCODE before the checking of the table entry validity to aide in debugging new cpu entries. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks If CONFIG_CPU_DCACHE_WRITETHOUGH is set, then the S3C24XX PM code fails to compile, as there is no need to flush the D-cache, the flush function arm920_flush_kern_cache_all() is not compiled. Fix the code to not use this if the config is set. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks The default serial port-mapping for the Osiris has the port 2 mapped onto the first serial port, and no port1. Correct this so port 1 is port. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 05 6月, 2006 1 次提交
-
-
由 Egry Gabor 提交于
Trivial typo fixes in Kconfig files (ARM). Signed-off-by: NEgry Gabor <gaboregry@t-online.hu> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 5月, 2006 1 次提交
-
-
由 Dimitry Andric 提交于
Patch from Dimitry Andric In arch/arm/mach-s3c2410/sleep.S, the coprocessor registers are saved at suspend time, and restored at resume time. However, an undefined instruction is used when attempting to restore a non-existent "auxiliary control register". This leads to a crash on S3C2412, which has an ARM926 core instead of an ARM920. At suspend time, the following fragment runs: mrc p15, 0, r7, c2, c0, 0 @ translation table base address mrc p15, 0, r8, c2, c0, 0 @ auxiliary control register mrc p15, 0, r9, c1, c0, 0 @ control register and at resume time, the following fragment runs: mcr p15, 0, r7, c2, c0, 0 @ translation table base mcr p15, 0, r8, c1, c1, 0 @ auxilliary control ... mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc There are several problems with these fragments: 1. The ARM920 and ARM926 cores don't have any "auxiliary control register", at least not according to the ARM920 and ARM926 TRM's. 2. The 2nd line of suspend erroneously saves the c2 register again. 3. This saved c2 value is restored using an undefined instruction. For some reason this does not crash on ARM920, but does crash on ARM926. The following patch fixes all these problems. Signed-off-by: NDimitry Andric <dimitry@andric.com> Yes, this looks sensible Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 4月, 2006 1 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Fix bad spelling of partition Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 12 4月, 2006 1 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks The wrong variable is written back to CLKDIVN register if the USB PLL speed is above 94MHz Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 4月, 2006 1 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks The clkout0/1 output parent code is missing the HCLK option, and does not set clk->parent field after updating the clock field Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-