- 14 1月, 2011 24 次提交
-
-
由 Alexandre Bounine 提交于
Add definition of the unique device identifier field in the component tag. RIO_CTAG_UDEVID does not take all 32 bits of the component tag value to allow future extensions to the component tag use. Selected size of the RIO_CTAG_UDEVID field (17 bits) is sufficient to accommodate maximum number of endpoints in large RIO network (16-bit id) plus switches. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Convert RIO switches device structures (rio_dev + rio_switch) into a single allocation unit. This change is based on the fact that RIO switches are using common RIO device objects anyway. Allocating RIO switch objects as RIO devices with added space for switch information simplifies handling of RIO switch devices. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Change code to use one storage location common for switches and endpoints. This eliminates unnecessary device type checks during basic access operations. Logic that assigns destid to RIO devices stays unchanged - as before, switches use an associated destid because they do not have their own. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Namhyung Kim 提交于
Commit 66fa12c5 ("ieee1394: remove the old IEEE 1394 driver stack") eliminated the only user of cdev_index(). So it can be removed too. Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <gregkh@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wolfram Sang 提交于
Because GPIOs can have crucial functions especially in embedded systems, we are better safe than sorry regarding their configuration. For gpio_request, the documentation is simply enforced: <quote>"The return value of gpio_request() must be checked."</quote> For gpio_direction_* and gpio_request_*, we now act accordingly. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <gregkh@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
Drop the old geode_gpio crud, as well as the raw outl() calls; instead, use the Linux GPIO API where possible, and the cs5535_gpio API in other places. Note that we don't actually clean up the driver properly yet (once loaded, it always remains loaded). That'll come later.. This patch is necessary for building the driver. Signed-off-by: NAndres Salomon <dilinger@queued.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
This adds (well, re-adds actually) handling for events/IRQs through cs5535 GPIOs. In the wild and wooly world of CS5535, setup_event() is for assigning an IRQ to a GPIO filter/event pair, and set_irq() sets up the pair to trigger IRQs. These should really only be used in highly platform-specific drivers (such as OLPC's DCON driver). Sadly, because set_irq() uses MSRs, this causes the driver to become X86-specific. Signed-off-by: NAndres Salomon <dilinger@queued.net> Signed-off-by: NDaniel Drake <dsd@laptop.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikael Pettersson 提交于
This cleans up a few bits in binfmt_elf.c and binfmts.h: - the hasvdso field in struct linux_binfmt is unused, so remove it and the only initialization of it - the elf_map CPP symbol is not defined anywhere in the kernel, so remove an unnecessary #ifndef elf_map - reduce excessive indentation in elf_format's initializer - add missing spaces, remove extraneous spaces No functional changes, but tested on x86 (32 and 64 bit), powerpc (32 and 64 bit), sparc64, arm, and alpha. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robin Holt 提交于
On a 16TB machine, max_user_watches has an integer overflow. Convert it to use a long and handle the associated fallout. Signed-off-by: NRobin Holt <holt@sgi.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: NDavide Libenzi <davidel@xmailserver.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
- Use no_printk for !CONFIG_PRINTK printk_ratelimited. - Whitespace cleanup. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
- Move prototypes and align arguments. - Add CONFIG_PRINTK guard for print_hex functions Signed-off-by: NJoe Perches <joe@perches.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
- Move printk_once definitions and add an #ifdef CONFIG_PRINTK - Add pr_<level>_once so printks can use pr_fmt Signed-off-by: NJoe Perches <joe@perches.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
- Move no_printk above first CONFIG_PRINTK block so it can be used by printk_once. - Convert statement expression if (0) printk macros to no_printk. - Convert printk_once(x...) to more normally used (fmt, ...) fmt, ##__VA_ARGS__. - Standardize __attribute__ use. - Expand single line inline functions. - Remove space before pointer. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
There are many uses of printk_once(KERN_<level>, so add pr_<level>_once macros to avoid printk_once(KERN_<level> pr_fmt(fmt). Add an #ifdef CONFIG_PRINTK for print_hex_dump and static inline void functions for the #else cases to reduce embedded code size. Neaten and organize the rest of the code. This patch: Move console functions and variables together. Signed-off-by: NJoe Perches <joe@perches.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Rosenberg 提交于
Add the %pK printk format specifier and the /proc/sys/kernel/kptr_restrict sysctl. The %pK format specifier is designed to hide exposed kernel pointers, specifically via /proc interfaces. Exposing these pointers provides an easy target for kernel write vulnerabilities, since they reveal the locations of writable structures containing easily triggerable function pointers. The behavior of %pK depends on the kptr_restrict sysctl. If kptr_restrict is set to 0, no deviation from the standard %p behavior occurs. If kptr_restrict is set to 1, the default, if the current user (intended to be a reader via seq_printf(), etc.) does not have CAP_SYSLOG (currently in the LSM tree), kernel pointers using %pK are printed as 0's. If kptr_restrict is set to 2, kernel pointers using %pK are printed as 0's regardless of privileges. Replacing with 0's was chosen over the default "(null)", which cannot be parsed by userland %p, which expects "(nil)". [akpm@linux-foundation.org: check for IRQ context when !kptr_restrict, save an indent level, s/WARN/WARN_ONCE/] [akpm@linux-foundation.org: coding-style fixup] [randy.dunlap@oracle.com: fix kernel/sysctl.c warning] Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: James Morris <jmorris@namei.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Thomas Graf <tgraf@infradead.org> Cc: Eugene Teo <eugeneteo@kernel.org> Cc: Kees Cook <kees.cook@canonical.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Cc: Will Newton <will.newton@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexander Shishkin 提交于
Currently, tosh_smm() prototype is present in a header file exported to userland. This patch fixes it. Signed-off-by: NAlexander Shishkin <virtuoso@slind.org> Cc: Jonathan Buzzard <jonathan@buzzard.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Michal reports: In the framebuffer subsystem the abs() macro is often used as a part of the calculation of a Manhattan metric, which in turn is used as a measure of similarity between video modes. The arguments of abs() are sometimes unsigned numbers. This worked fine until commit a49c59c0 ("Make sure the value in abs() does not get truncated if it is greater than 2^32:) , which changed the definition of abs() to prevent truncation. As a result of this change, in the following piece of code: u32 a = 0, b = 1; u32 c = abs(a - b); 'c' will end up with a value of 0xffffffff instead of the expected 0x1. A problem caused by this change and visible by the end user is that framebuffer drivers relying on functions from modedb.c will fail to find high resolution video modes similar to that explicitly requested by the user if an exact match cannot be found (see e.g. Fix this by special-casing `long' types within abs(). This patch reduces x86_64 code size a bit - drivers/video/uvesafb.o shrunk by 15 bytes, presumably because it is doing abs() on 4-byte quantities, and expanding those to 8-byte longs adds code. testcase: #define oldabs(x) ({ \ long __x = (x); \ (__x < 0) ? -__x : __x; \ }) #define newabs(x) ({ \ long ret; \ if (sizeof(x) == sizeof(long)) { \ long __x = (x); \ ret = (__x < 0) ? -__x : __x; \ } else { \ int __x = (x); \ ret = (__x < 0) ? -__x : __x; \ } \ ret; \ }) typedef unsigned int u32; main() { u32 a = 0; u32 b = 1; u32 oldc = oldabs(a - b); u32 newc = newabs(a - b); printf("%u %u\n", oldc, newc); } akpm:/home/akpm> gcc t.c akpm:/home/akpm> ./a.out 4294967295 1 Reported-by: NMichal Januszewski <michalj@gmail.com> Cc: Rolf Eike Beer <eike-kernel@sf-tec.de Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Seiji Aguchi 提交于
We need to know the reason why system rebooted in support service. However, we can't inform our customers of the reason because final messages are lost on current Linux kernel. This patch improves the situation above because the final messages are saved by adding kmsg_dump() to reboot, halt, poweroff and emergency_restart path. Signed-off-by: NSeiji Aguchi <seiji.aguchi@hds.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marco Stornelli <marco.stornelli@gmail.com> Reviewed-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arun Murthy 提交于
Currently the led device name is fetched from the device_type in I2C_BOARD_INFO which comes from the platform data. This name is in turn used to create an entry in sysfs. If there exists two or more lp5521 on a particular platform, the device_type in I2C_BOARD_INFO has to be the same, else lp5521 driver probe wont be called and if used so, results in run time warning "cannot create sysfs with same name" and hence a failure. The name that is used to create sysfs entry is to be passed by the struct led_platform_data. Hence adding an element of type const char * and change in lp5521 driver to use this name in creating the led device if present else use the name obtained by I2C_BOARD_INFO. Signed-off-by: NArun Murthy <arun.murthy@stericsson.com> Acked-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Samu Onkalo 提交于
Currently all leds channels begins with string lp5523. Patch adds a possibility to provide name via platform data. This makes it possible to have several chips without overlapping sysfs names. Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Cc: Arun Murthy <arun.murthy@stericsson.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 1月, 2011 2 次提交
-
-
由 Florian Westphal 提交于
broute table init hook sets up the "br_should_route_hook" pointer, which then gets called from br_input. commit a386f990 (bridge: add proper RCU annotation to should_route_hook) introduced a typedef, and then changed this to: br_should_route_hook_t *rhook; [..] rhook = rcu_dereference(br_should_route_hook); if (*rhook(skb)) problem is that "br_should_route_hook" contains the address of the function, so calling *rhook() results in kernel panic. Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Andy Adamson 提交于
Indicate support for referrals. Do not set any PNFS roles. Check the flags returned by the server for validity. Do not use exchange flags from an old client ID instance when recovering a client ID. Update the EXCHID4_FLAG_XXX set to RFC 5661. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 1月, 2011 14 次提交
-
-
由 Tom Herbert 提交于
Added alloc_netdev_mqs function which allows the number of transmit and receive queues to be specified independenty. alloc_netdev_mq was changed to a macro to call the new function. Also added alloc_etherdev_mqs with same purpose. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jean Delvare 提交于
Helper functions for I2C and SMBus transactions don't modify the i2c_client that is passed to them, so it can be marked const. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Peter Korsgaard 提交于
Add an i2c mux driver providing access to i2c bus segments using a hardware MUX sitting on a master bus and controlled through gpio pins. E.G. something like: ---------- ---------- Bus segment 1 - - - - - | | SCL/SDA | |-------------- | | | |------------| | | | | | Bus segment 2 | | | Linux | GPIO 1..N | MUX |--------------- Devices | |------------| | | | | | | | Bus segment M | | | |---------------| | ---------- ---------- - - - - - SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M according to the settings of the GPIO pins 1..N. Signed-off-by: NPeter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Trond Myklebust 提交于
vm_map_ram() is not available on NOMMU platforms, and causes trouble on incoherrent architectures such as ARM when we access the page data through both the direct and the virtual mapping. The alternative is to use the direct mapping to access page data for the case when we are not crossing a page boundary, but to copy the data into a linear scratch buffer when we are accessing data that spans page boundaries. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Tested-by: NMarc Kleine-Budde <mkl@pengutronix.de> Cc: stable@kernel.org [2.6.37]
-
由 Eric Dumazet 提交于
Using "iptables -L" with a lot of rules have a too big BH latency. Jesper mentioned ~6 ms and worried of frame drops. Switch to a per_cpu seqlock scheme, so that taking a snapshot of counters doesnt need to block BH (for this cpu, but also other cpus). This adds two increments on seqlock sequence per ipt_do_table() call, its a reasonable cost for allowing "iptables -L" not block BH processing. Reported-by: NJesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Patrick McHardy <kaber@trash.net> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NJesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Josh Hunt 提交于
When I enable EXT2_XATTR_DEBUG in fs/ext2/xattr.c I get a build error stating the following: CC fs/ext2/xattr.o fs/ext2/xattr.c: In function 'ext2_xattr_cache_insert': fs/ext2/xattr.c:841: error: dereferencing pointer to incomplete type fs/ext2/xattr.c:846: error: dereferencing pointer to incomplete type make[2]: *** [fs/ext2/xattr.o] Error 1 make[1]: *** [fs/ext2] Error 2 make: *** [fs] Error 2 These lines reference ext2_xattr_cache->c_entry_count which is defined in struct mb_cache. struct mb_cache is currently only defined in fs/mbcache.c. Moving struct mb_cache definition to include/linux/mbcache.h to resolve the issue. Signed-off-by: NJosh Hunt <johunt@akamai.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Eric Sandeen 提交于
The addition of 64k block capability in the rec_len_from_disk and rec_len_to_disk functions added a bit of math overhead which slows down file create workloads needlessly when the architecture cannot even support 64k blocks, thanks to page size limits. Similar changes already exist in the ext4 codebase. The directory entry checking can also be optimized a bit by sprinkling in some unlikely() conditions to move the error handling out of line. bonnie++ sequential file creates on a 512MB ramdisk speeds up from about 77,000/s to about 82,000/s, about a 6% improvement. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Joe Perches 提交于
Use %pV in __quota_error so a single printk can not be interleaved with other logging messages. Add __attribute__((format (printf, 3, 4))) so format and arguments can be verified by compiler. Make sure printk formats and arguments match. Block # needed a pointer dereference. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Lukas Czerner 提交于
Walk through allocation groups and trim all free extents. It can be invoked through FITRIM ioctl on the file system. The main idea is to provide a way to trim the whole file system if needed, since some SSD's may suffer from performance loss after the whole device was filled (it does not mean that fs is full!). It search for free extents in allocation groups specified by Byte range start -> start+len. When the free extent is within this range, blocks are marked as used and then trimmed. Afterwards these blocks are marked as free in per-group bitmap. [JK: Fixed up error handling and trimming of a single group] Signed-off-by: NLukas Czerner <lczerner@redhat.com> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Theodore Ts'o 提交于
Replace the jbd2_inode structure (which is 48 bytes) with a pointer and only allocate the jbd2_inode when it is needed --- that is, when the file system has a journal present and the inode has been opened for writing. This allows us to further slim down the ext4_inode_info structure. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Mattia Dongili 提交于
Add new mappings for assist, VAIO, zoom and eject buttons present on refurbished P, Z and EC models. Reported-by: NGyorgy Jeney <nog.lkml@gmail.com> Reported-by: NStephan Mueller <smueller@chronox.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Alexey Dobriyan 提交于
Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Remove path.h from sched.h and other files. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-