- 22 12月, 2012 2 次提交
-
-
由 Mikulas Patocka 提交于
When allocating memory for the userspace ioctl data, set some appropriate GPF flags directly instead of using PF_MEMALLOC. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Abort dm ioctl processing if userspace changes the data_size parameter after we validated it but before we finished copying the data buffer from userspace. The dm ioctl parameters are processed in the following sequence: 1. ctl_ioctl() calls copy_params(); 2. copy_params() makes a first copy of the fixed-sized portion of the userspace parameters into the local variable "tmp"; 3. copy_params() then validates tmp.data_size and allocates a new structure big enough to hold the complete data and copies the whole userspace buffer there; 4. ctl_ioctl() reads userspace data the second time and copies the whole buffer into the pointer "param"; 5. ctl_ioctl() reads param->data_size without any validation and stores it in the variable "input_param_size"; 6. "input_param_size" is further used as the authoritative size of the kernel buffer. The problem is that userspace code could change the contents of user memory between steps 2 and 4. In particular, the data_size parameter can be changed to an invalid value after the kernel has validated it. This lets userspace force the kernel to access invalid kernel memory. The fix is to ensure that the size has not changed at step 4. This patch shouldn't have a security impact because CAP_SYS_ADMIN is required to run this code, but it should be fixed anyway. Reported-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
-
- 27 7月, 2012 1 次提交
-
-
由 Alasdair G Kergon 提交于
Commit outstanding metadata before returning the status for a dm thin pool so that the numbers reported are as up-to-date as possible. The commit is not performed if the device is suspended or if the DM_NOFLUSH_FLAG is supplied by userspace and passed to the target through a new 'status_flags' parameter in the target's dm_status_fn. The userspace dmsetup tool will support the --noflush flag with the 'dmsetup status' and 'dmsetup wait' commands from version 1.02.76 onwards. Tested-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 29 3月, 2012 1 次提交
-
-
由 Mikulas Patocka 提交于
Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Acked-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 08 3月, 2012 1 次提交
-
-
由 Jesper Juhl 提交于
If 'argc' is zero we jump to the 'out:' label, but this leaks the (unused) memory that 'dm_split_args()' allocated for 'argv' if the string being split consisted entirely of whitespace. Jump to the 'out_argv:' label instead to free up that memory. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Cc: stable@kernel.org Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 01 11月, 2011 1 次提交
-
-
由 Alasdair G Kergon 提交于
Introduce DM_TARGET_IMMUTABLE to indicate that the target type cannot be mixed with any other target type, and once loaded into a device, it cannot be replaced with a table containing a different type. The thin provisioning pool device will use this. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 02 8月, 2011 4 次提交
-
-
由 Mikulas Patocka 提交于
Exactly one of name, uuid or device must be specified when referencing an existing device. This removes the ambiguity (risking the wrong device being updated) if two conflicting parameters were specified. Previously one parameter got used and any others were ignored silently. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Move logic to find device based on major/minor number to a separate function __get_dev_cell (similar to __get_uuid_cell and __get_name_cell). This makes the function __find_device_hash_cell more straightforward. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Move parameter filling from find_device to __find_device_hash_cell. This patch causes ioctls using __find_device_hash_cell (DM_DEV_REMOVE_CMD, DM_DEV_SUSPEND_CMD - resume, DM_TABLE_CLEAR_CMD) to return device parameters, bringing them into line with the other ioctls. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Detect invalid empty messages in core dm instead of requiring every target to check this. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 24 3月, 2011 2 次提交
-
-
由 Milan Broz 提交于
Add DM_SECURE_DATA_FLAG which userspace can use to ensure that all buffers allocated for dm-ioctl are wiped immediately after use. The user buffer is wiped as well (we do not want to keep and return sensitive data back to userspace if the flag is set). Wiping is useful for cryptsetup to ensure that the key is present in memory only in defined places and only for the time needed. (For crypt, key can be present in table during load or table status, wait and message commands). Signed-off-by: NMilan Broz <mbroz@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Milan Broz 提交于
Prepare code for implementing buffer wipe flag. No functional change in this patch. Signed-off-by: NMilan Broz <mbroz@redhat.com> Acked-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 14 1月, 2011 2 次提交
-
-
由 Milan Broz 提交于
The device-mapper should not send warning messages to syslog if a device is not found. This can be done by userspace according to the returned dm-ioctl error code. So move these messages to debug level and use rate limiting to not flood syslog. Signed-off-by: NMilan Broz <mbroz@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Peter Jones 提交于
Allow the uuid of a mapped device to be set after device creation. Previously the uuid (which is optional) could only be set by DM_DEV_CREATE. If no uuid was supplied it could not be set later. Sometimes it's necessary to create the device before the uuid is known, and in such cases the uuid must be filled in after the creation. This patch extends DM_DEV_RENAME to accept a uuid accompanied by a new flag DM_UUID_FLAG. This can only be done once and if no uuid was previously supplied. It cannot be used to change an existing uuid. DM_VERSION_MINOR is also bumped to 19 to indicate this interface extension is available. Signed-off-by: NPeter Jones <pjones@redhat.com> Signed-off-by: NJonathan Brassow <jbrassow@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 15 10月, 2010 1 次提交
-
-
由 Arnd Bergmann 提交于
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
-
- 12 8月, 2010 10 次提交
-
-
由 Peter Rajnoha 提交于
Add devname:mapper/control and MAPPER_CTRL_MINOR module alias to support dm-mod module autoloading. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NPeter Rajnoha <prajnoha@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Will Drewry 提交于
This change unifies the various checks and finalization that occurs on a table prior to use. By doing so, it allows table construction without traversing the dm-ioctl interface. Signed-off-by: NWill Drewry <wad@chromium.org> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
Change bio-based mapped devices no longer to have a fully initialized request_queue (request_fn, elevator, etc). This means bio-based DM devices no longer register elevator sysfs attributes ('iosched/' tree or 'scheduler' other than "none"). In contrast, a request-based DM device will continue to have a full request_queue and will register elevator sysfs attributes. Therefore a user can determine a DM device's type by checking if elevator sysfs attributes exist. First allocate a minimalist request_queue structure for a DM device (needed for both bio and request-based DM). Initialization of a full request_queue is deferred until it is known that the DM device is request-based, at the end of the table load sequence. Factor DM device's request_queue initialization: - common to both request-based and bio-based into dm_init_md_queue(). - specific to request-based into dm_init_request_based_queue(). The md->type_lock mutex is used to protect md->queue, in addition to md->type, during table_load(). A DM device's first table_load will establish the immutable md->type. But md->queue initialization, based on md->type, may fail at that time (because blk_init_allocated_queue cannot allocate memory). Therefore any subsequent table_load must (re)try dm_setup_md_queue independently of establishing md->type. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Acked-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
Determine whether a mapped device is bio-based or request-based when loading its first (inactive) table and don't allow that to be changed later. This patch performs different device initialisation in each of the two cases. (We don't think it's necessary to add code to support changing between the two types.) Allowed md->type transitions: DM_TYPE_NONE to DM_TYPE_BIO_BASED DM_TYPE_NONE to DM_TYPE_REQUEST_BASED We now prevent table_load from replacing the inactive table with a conflicting type of table even after an explicit table_clear. Introduce 'type_lock' into the struct mapped_device to protect md->type and to prepare for the next patch that will change the queue initialization and allocate memory while md->type_lock is held. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Acked-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com> drivers/md/dm-ioctl.c | 15 +++++++++++++++ drivers/md/dm.c | 37 ++++++++++++++++++++++++++++++------- drivers/md/dm.h | 5 +++++ include/linux/dm-ioctl.h | 4 ++-- 4 files changed, 52 insertions(+), 9 deletions(-)
-
由 Arnd Bergmann 提交于
The dm control device does not implement read/write, so it has no use for seeking. Using no_llseek prevents falling back to default_llseek, which requires the BKL. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Kiyoshi Ueda 提交于
This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Kiyoshi Ueda 提交于
This patch changes dm_hash_remove_all() to release _hash_lock when removing a device. After removing the device, dm_hash_remove_all() takes _hash_lock and searches the hash from scratch again. This patch is a preparation for the next patch, which changes device deletion code to wait for md reference to be 0. Without this patch, the wait in the next patch may cause AB-BA deadlock: CPU0 CPU1 ----------------------------------------------------------------------- dm_hash_remove_all() down_write(_hash_lock) table_status() md = find_device() dm_get(md) <increment md->holders> dm_get_live_or_inactive_table() dm_get_inactive_table() down_write(_hash_lock) <in the md deletion code> <wait for md->holders to be 0> Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: stable@kernel.org Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Peter Rajnoha 提交于
All the dm ioctls that generate uevents set the DM_UEVENT_GENERATED flag so that userspace knows whether or not to wait for a uevent to be processed before continuing, The dm rename ioctl sets this flag but was not structured to return it to userspace. This patch restructures the rename ioctl processing to behave like the other ioctls that return data and so fix this. Signed-off-by: NPeter Rajnoha <prajnoha@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
__dev_status() cannot fail so make it void and simplify callers. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Peter Rajnoha 提交于
Remove useless __dev_status call while processing an ioctl that sets up device geometry and target message. The data is not returned to userspace so there is no point collecting it and in the case of target_message it is collected before processing the message so if it did return it might be stale. Signed-off-by: NPeter Rajnoha <prajnoha@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 06 3月, 2010 2 次提交
-
-
由 Peter Rajnoha 提交于
Set a new DM_UEVENT_GENERATED_FLAG when returning from ioctls to indicate that a uevent was actually generated. This tells the userspace caller that it may need to wait for the event to be processed. Signed-off-by: NPeter Rajnoha <prajnoha@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
Only issue a uevent on a resume if the state of the device changed, i.e. if it was suspended and/or its table was replaced. Signed-off-by: NDave Wysochanski <dwysocha@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 11 12月, 2009 7 次提交
-
-
由 Kiyoshi Ueda 提交于
This patch renames dm_suspended() to dm_suspended_md() and keeps it internal to dm. No functional change. Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
When swapping a new table into place, retain the old table until its replacement is in place. An old check for an empty table is removed because this is enforced in populate_table(). __unbind() becomes redundant when followed by __bind(). Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
Add the flag DM_QUERY_INACTIVE_TABLE_FLAG to the ioctls to return infomation about the loaded-but-not-yet-active table instead of the live table. Prior to this patch it was impossible to obtain this information until the device had been 'resumed'. Userspace dmsetup and libdevmapper support the flag as of version 1.02.40. e.g. dmsetup info --inactive vg1-lv1 Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Anderson 提交于
Once we begin deleting a device, prevent any further messages being sent to targets of its table (to avoid races). Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Alasdair G Kergon 提交于
Rename dm_get_table to dm_get_live_table. Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Roel Kluin 提交于
strlcpy() will always null terminate the string. The code should already guarantee this as the last bytes are already NULs and the string lengths were restricted before being stored in hc. Removing the '-1' becomes necessary so strlcpy() doesn't lose the last character of a maximum-length string. - agk Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Fix a reported deadlock if there are still unprocessed multipath events on a device that is being removed. _hash_lock is held during dev_remove while trying to send the outstanding events. Sending the events requests the _hash_lock again in dm_copy_name_and_uuid. This patch introduces a separate lock around regions that modify the link to the hash table (dm_set_mdptr) or the name or uuid so that dm_copy_name_and_uuid no longer needs _hash_lock. Additionally, dm_copy_name_and_uuid can only be called if md exists so we can drop the dm_get() and dm_put() which can lead to a BUG() while md is being freed. The deadlock: #0 [ffff8106298dfb48] schedule at ffffffff80063035 #1 [ffff8106298dfc20] __down_read at ffffffff8006475d #2 [ffff8106298dfc60] dm_copy_name_and_uuid at ffffffff8824f740 #3 [ffff8106298dfc90] dm_send_uevents at ffffffff88252685 #4 [ffff8106298dfcd0] event_callback at ffffffff8824c678 #5 [ffff8106298dfd00] dm_table_event at ffffffff8824dd01 #6 [ffff8106298dfd10] __hash_remove at ffffffff882507ad #7 [ffff8106298dfd30] dev_remove at ffffffff88250865 #8 [ffff8106298dfd60] ctl_ioctl at ffffffff88250d80 #9 [ffff8106298dfee0] do_ioctl at ffffffff800418c4 #10 [ffff8106298dff00] vfs_ioctl at ffffffff8002fab9 #11 [ffff8106298dff40] sys_ioctl at ffffffff8004bdaf #12 [ffff8106298dff80] tracesys at ffffffff8005d28d (via system_call) Cc: stable@kernel.org Reported-by: Nguy keren <choo@actcom.co.il> Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 20 9月, 2009 1 次提交
-
-
由 Kay Sievers 提交于
This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 22 6月, 2009 2 次提交
-
-
由 Kiyoshi Ueda 提交于
This patch enables request-based dm. o Request-based dm and bio-based dm coexist, since there are some target drivers which are more fitting to bio-based dm. Also, there are other bio-based devices in the kernel (e.g. md, loop). Since bio-based device can't receive struct request, there are some limitations on device stacking between bio-based and request-based. type of underlying device bio-based request-based ---------------------------------------------- bio-based OK OK request-based -- OK The device type is recognized by the queue flag in the kernel, so dm follows that. o The type of a dm device is decided at the first table binding time. Once the type of a dm device is decided, the type can't be changed. o Mempool allocations are deferred to at the table loading time, since mempools for request-based dm are different from those for bio-based dm and needed mempool type is fixed by the type of table. o Currently, request-based dm supports only tables that have a single target. To support multiple targets, we need to support request splitting or prevent bio/request from spanning multiple targets. The former needs lots of changes in the block layer, and the latter needs that all target drivers support merge() function. Both will take a time. Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Milan Broz 提交于
Add support for passing a 32 bit "cookie" into the kernel with the DM_SUSPEND, DM_DEV_RENAME and DM_DEV_REMOVE ioctls. The (unsigned) value of this cookie is returned to userspace alongside the uevents issued by these ioctls in the variable DM_COOKIE. This means the userspace process issuing these ioctls can be notified by udev after udev has completed any actions triggered. To minimise the interface extension, we pass the cookie into the kernel in the event_nr field which is otherwise unused when calling these ioctls. Incrementing the version number allows userspace to determine in advance whether or not the kernel supports the cookie. If the kernel does support this but userspace does not, there should be no impact as the new variable will just get ignored. Signed-off-by: NMilan Broz <mbroz@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 16 6月, 2009 1 次提交
-
-
由 Kay Sievers 提交于
This adds support for misc devices to report their requested nodename to userspace. It also updates a number of misc drivers to provide the needed subdirectory and device name to be used for them. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NJan Blunck <jblunck@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 4月, 2009 1 次提交
-
-
由 Martin K. Petersen 提交于
This patch provides support for data integrity passthrough in the device mapper. - If one or more component devices support integrity an integrity profile is preallocated for the DM device. - If all component devices have compatible profiles the DM device is flagged as capable. - Handle integrity metadata when splitting and cloning bios. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
- 17 3月, 2009 1 次提交
-
-
由 Mikulas Patocka 提交于
Fix an error introduced in dm-table-rework-reference-counting.patch. When there is failure after table initialization, we need to use dm_table_destroy, not dm_table_put, to free the table. dm_table_put may be used only after dm_table_get. Cc: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Reviewed-by: NJonathan Brassow <jbrassow@redhat.com> Reviewed-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-