The Ivybridge eDP control register looks like a cross between a
Cougarpoint PCH DP control register and a Sandybridge eDP control
register.

Where things trivially match, share the code. Where there are any
tricky bits, just split things out into two obviously separate code paths.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Tested-by: NFang Xun <xunx.fang@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41991

On IVB C0+ with newer BIOSes, the forcewake handshake has changed.  There's
now a bitfield for different driver components to keep the GT powered
on.  On Linux, we centralize forcewake handling in one place, so we
still just need a single bit, but we need to use the new registers if MT
forcewake is enabled.

This needs testing on affected machines.  Please reply with your
tested-by if you had problems after a BIOS upgrade and this patch fixes
them.

v2: force MT mode. shift by 16
v3: set MT force wake bits then check ECOBUS

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42923Tested-by: NManoj Iyer <manoj.iyer@canonical.com>
Tested-by: NRobert Hooker <robert.hooker@canonical.com>
Tested-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Check parent options for iterated tests

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Make i2cdev_notifier_call static
  i2c: Delete ANY_I2C_BUS
  i2c: Fix device name for 10-bit slave address
  i2c-algo-bit: Generate correct i2c address sequence for 10-bit target

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: TPS65910: Fix VDD1/2 voltage selector count

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits)
  drm: integer overflow in drm_mode_dirtyfb_ioctl()
  drivers/gpu/vga/vgaarb.c: add missing kfree
  drm/radeon/kms/atom: unify i2c gpio table handling
  drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real
  ttm: Don't return the bo reserved on error path
  drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CS
  drm/i915: Fix inconsistent backlight level during disabled
  drm, i915: Fix memory leak in i915_gem_busy_ioctl().
  drm/i915: Use DPCD value for max DP lanes.
  drm/i915: Initiate DP link training only on the lanes we'll be using
  drm/i915: Remove trailing white space
  drm/i915: Try harder during dp pattern 1 link training
  drm/i915: Make DP prepare/commit consistent with DP dpms
  drm/i915: Let panel power sequencing hardware do its job
  drm/i915: Treat PCH eDP like DP in most places
  drm/i915: Remove link_status field from intel_dp structure
  drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control
  drm/i915: Module parameters using '-1' as default must be signed type
  drm/i915: Turn on another required clock gating bit on gen6.
  drm/i915: Turn on a required 3D clock gating bit on Sandybridge.
  ...

Count of selector voltage is required for regulator_set_voltage
to work via set_voltage_sel. VDD1/2 currently have it as zero,
so regulator_set_voltage won't work for VDD1/2.
Update count (n_voltages) for VDD1/2.

Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain

With above expr, number of voltages that can be selected is
step value count * gain count

constant for gain count will be called VDD1_2_NUM_VOLT_COARSE

existing constant for step value count is VDD1_2_NUM_VOLTS,
use VDD1_2_NUM_VOLT_FINE instead to make clear that step value
is not the only component in deciding selectable voltage count
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The function i2cdev_notifier_call is used only in i2c-dev file
making it static.
Also removes the following sparse warning

drivers/i2c/i2c-dev.c:582:5: warning: symbol 'i2cdev_notifier_call'
was not declared. Should it be static?
Signed-off-by: NShubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Last piece of code using ANY_I2C_BUS was deleted almost 2 years ago,
so ANY_I2C_BUS can go away as well.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

10-bit addresses overlap with traditional 7-bit addresses, leading in
device name collisions. Add an arbitrary offset to 10-bit addresses to
prevent this collision. The offset was chosen so that the address is
still easily recognizable.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>

The wrong bits were put on the wire, fix that.

This fixes kernel bug #42562.
Signed-off-by: NSheng-Hui J. Chu <jeffchu@broadcom.com>
Cc: stable@kernel.org
Signed-off-by: NJean Delvare <khali@linux-fr.org>

There is a potential integer overflow in drm_mode_dirtyfb_ioctl()
if userspace passes in a large num_clips.  The call to kmalloc would
allocate a small buffer, and the call to fb->funcs->dirty may result
in a memory corruption.
Reported-by: NHaogang Chen <haogangchen@gmail.com>
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This reverts commit dc937280.

As requested by Ben Herrenschmidt:
  "This breaks some powerpc platforms at least.  The practice of having
   a node provide an explicit "interrupt-parent" property pointing to
   itself is an old trick that we've used in the past to allow a
   device-node to have interrupts routed to different controllers.

   In that case, the node also contains an interrupt-map, so the node is
   its own parent, the interrupt resolution hits the map, which then can
   route each individual interrupt to a different parent."

Grant says:
  "Ah, nuts, yes that is broken then.  Yes, please revert the commit and
   Rob & I will come up with a better solution.

   Rob, I think it can be done by explicitly checking for np ==
   desc->interrupt_parent in of_irq_init() instead of relying on
   of_irq_find_parent() returning NULL."
Requested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  mount_subtree() pointless use-after-free
  iio: fix a leak due to improper use of anon_inode_getfd()
  microblaze: bury asm/namei.h

kbuf is a buffer that is local to this function, so all of the error paths
leaving the function should release it.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Cc: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Split the quirks and i2c_rec assignment into separate
functions used by both radeon_lookup_i2c_gpio() and
radeon_atombios_i2c_init().  This avoids duplicating code
and cases where quirks were only added to one of the
functions.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes i2c test failures when i2c_algo_bit.bit_test=1.

The hw doesn't actually require a mask, so just set it
to the default mask bits for r1xx-r4xx radeon ddc.

I missed this part the first time through.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

An unlikely race could case a bo to be returned reserved on an error path.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: (25 commits)
  drm/i915: Fix inconsistent backlight level during disabled
  drm, i915: Fix memory leak in i915_gem_busy_ioctl().
  drm/i915: Use DPCD value for max DP lanes.
  drm/i915: Initiate DP link training only on the lanes we'll be using
  drm/i915: Remove trailing white space
  drm/i915: Try harder during dp pattern 1 link training
  drm/i915: Make DP prepare/commit consistent with DP dpms
  drm/i915: Let panel power sequencing hardware do its job
  drm/i915: Treat PCH eDP like DP in most places
  drm/i915: Remove link_status field from intel_dp structure
  drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control
  drm/i915: Module parameters using '-1' as default must be signed type
  drm/i915: Turn on another required clock gating bit on gen6.
  drm/i915: Turn on a required 3D clock gating bit on Sandybridge.
  drm/i915: enable cacheable objects on Ivybridge
  drm/i915: add constants to size fence arrays and fields
  drm/i915: Ivybridge still has fences!
  drm/i915: forcewake warning fixes in debugfs
  drm/i915: Fix object refcount leak on mmappable size limit error path.
  drm/i915: Use mode_config.mutex in ironlake_panel_vdd_work
  ...

d'oh... we'd carefully pinned mnt->mnt_sb down, dropped mnt and attempt
to grab s_umount on mnt->mnt_sb.  The trouble is, *mnt might've been
overwritten by now...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ams_delta_serio - include linux/module.h
  Input: elantech - adjust hw_version detection logic
  Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: fix initialisation printout in s3c2410_wdt
  watchdog: Don't overwrite error value in wm831x_wdt_set_timeout()
  watchdog: adx_wdt.c: remove driver

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Revert pnfs ugliness from the generic NFS read code path
  SUNRPC: destroy freshly allocated transport in case of sockaddr init error
  NFS: Fix a regression in the referral code
  nfs: move nfs_file_operations declaration to bottom of file.c (try #2)
  nfs: when attempting to open a directory, fall back on normal lookup (try #5)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: remove free-space-cache.c WARN during log replay
  Btrfs: sectorsize align offsets in fiemap
  Btrfs: clear pages dirty for io and set them extent mapped
  Btrfs: wait on caching if we're loading the free space cache
  Btrfs: prefix resize related printks with btrfs:
  btrfs: fix stat blocks accounting
  Btrfs: avoid unnecessary bitmap search for cluster setup
  Btrfs: fix to search one more bitmap for cluster setup
  btrfs: mirror_num should be int, not u64
  btrfs: Fix up 32/64-bit compatibility for new ioctls
  Btrfs: fix barrier flushes
  Btrfs: fix tree corruption after multi-thread snapshots and inode_cache flush

* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: remove vm_dirties and task->dirties
  writeback: hard throttle 1000+ dd on a slow USB stick
  mm: Make task in balance_dirty_pages() killable

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fix more ET131X build errors
  staging: et131x depends on NET
  staging: slicoss depends on NET
  linux-next: et131x: Fix build error when CONFIG_PM_SLEEP not enabled

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (48 commits)
  USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c
  USB: option: add PID of Huawei E173s 3G modem
  OHCI: final fix for NVIDIA problems (I hope)
  USB: option: release new PID for ZTE 3G modem
  usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c
  USB: storage: ene_ub6250: fix compile warnings
  USB: option: add id for 3G dongle Model VT1000 of Viettel
  USB: serial: pl2303: rm duplicate id
  USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH
  usb-storage: Accept 8020i-protocol commands longer than 12 bytes
  USB: quirks: adding more quirky webcams to avoid squeaky audio
  powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit
  USB: at91: at91-ohci: fix set/get power
  USB: cdc-acm: Fix disconnect() vs close() race
  USB: add quirk for Logitech C600 web cam
  USB: EHCI: fix HUB TT scheduling issue with iso transfer
  USB: XHCI: resume root hubs when the controller resumes
  USB: workaround for bug in old version of GCC
  USB: ark3116 initialisation fix
  ...

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  TTY: ldisc, wait for ldisc infinitely in hangup
  TTY: ldisc, move wait idle to caller
  TTY: ldisc, allow waiting for ldisc arbitrarily long
  Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs"
  RS485: fix inconsistencies in the meaning of some variables
  pch_uart: Fix DMA resource leak issue
  serial,mfd: Fix CMSPAR setup
  tty/serial: Prevent drop of DCD on suspend for Tegra UARTs
  pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  pch_uart: Support new device LAPIS Semiconductor ML7831 IOH
  pch_uart: Fix hw-flow control issue
  tty: hvc_dcc: Fix duplicate character inputs
  jsm: Change maintainership

Merge branch 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

* 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers/base/node.c: fix compilation error with older versions of gcc
  uio: documentation fixups
  device.h: Fix struct member documentation

* 'char-misc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: ad525x_dpot: Fix AD8400 spi transfer size.
  pch_phub: Fix MAC address writing issue for LAPIS ML7831
  pch_phub: Improve ADE(Address Decode Enable) control
  pch_phub: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  pch_phub: Support new device LAPIS Semiconductor ML7831 IOH
  pcie-gadget-spear: Add "platform:" prefix for platform modalias
  MAINTAINERS: add CHAR and MISC driver maintainers

it can fail and in that case ->release() will *not* be called...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

altroot support has been gone for years, along with arch/*/asm/namei.h;
looks like a dummy survivor that sat it out in microblaze tree...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* 'dev' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix up a undefined error in ext4_free_blocks in debugging code
  ext4: add blk_finish_plug in error case of writepages.
  ext4: Remove kernel_lock annotations
  ext4: ignore journalled data options on remount if fs has no journal

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: Allocate larger oid buffer in request msgs
  ceph: initialize root dentry
  ceph: fix iput race when queueing inode work

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Log the fact that we've given ELOOP rather than creating a loop
  minixfs: kill manual hweight(), simplify
  fs/minix: Verify bitmap block counts before mounting

wrong register returned...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The log replay code only partially loads block groups, since
the block group caching code is able to detect and deal with
extents the logging code has pinned down.

While the logging code is pinning down block groups, there is
a bogus WARN_ON we're hitting if the code wasn't able to find
an extent in the cache.  This commit removes the warning because
it can happen any time there isn't a valid free space cache
for that block group.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

sbi is not defined, so let ext4_free_blocks use EXT4_SB(sb) instead
when EXT4FS_DEBUG is defined.
Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com>

To prevent an NFS server from being used to create a directory loop in an NFS
superblock on the client, the following patch was committed:

	commit 18367501
	Author: Al Viro <viro@zeniv.linux.org.uk>
	Date:   Tue Jul 12 21:42:24 2011 -0400
	Subject: fix loop checks in d_materialise_unique()

This causes ELOOP to be reported to anyone trying to access the dentry that
would otherwise cause the kernel to complete the loop.

However, no indication is given to the caller as to why an operation that ought
to work doesn't.  The fault is with the kernel, which doesn't want to try and
solve the problem as it gets horrendously messy if there's another mountpoint
somewhere in the trees being spliced that can't be moved[*].

[*] The real problem is that we don't handle the excision of a subtree that
gets moved _out_ of what we can see.  This can happen on the server where a
directory is merely moved between two other dirs on the same filesystem, but
where destination dir is not accessible by the client.

So, given the choice to return ELOOP rather than trying to reconfigure the
dentry tree, we should give the caller some indication of why they aren't being
allowed to make what should be a legitimate request and log a message.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NSachin Prabhu <sprabhu@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (86 commits)
  ipv4: fix redirect handling
  ping: dont increment ICMP_MIB_INERRORS
  sky2: fix hang in napi_disable
  sky2: enforce minimum ring size
  bonding: Don't allow mode change via sysfs with slaves present
  f_phonet: fix page offset of first received fragment
  stmmac: fix pm functions avoiding sleep on spinlock
  stmmac: remove spin_lock in stmmac_ioctl.
  stmmac: parameters auto-tuning through HW cap reg
  stmmac: fix advertising 1000Base capabilties for non GMII iface
  stmmac: use mdelay on timeout of sw reset
  sky2: version 1.30
  sky2: used fixed RSS key
  sky2: reduce default Tx ring size
  sky2: rename up/down functions
  sky2: pci posting issues
  sky2: fix hang on shutdown (and other irq issues)
  r6040: fix check against MCRO_HASHEN bit in r6040_multicast_list
  MAINTAINERS: change email address for shemminger
  pch_gbe: Move #include of module.h
  ...