- 17 11月, 2011 1 次提交
-
-
由 Peter Zijlstra 提交于
Since once needs to do something at conferences and fixing compile warnings doesn't actually require much if any attention I decided to break up the sched.c #include "*.c" fest. This further modularizes the scheduler code. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-x0fcd3mnp8f9c99grcpewmhi@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 14 11月, 2011 1 次提交
-
-
由 Carsten Emde 提交于
In UP systems, the idle task is initialized using the init_task structure from which the command name is taken (currently "swapper"). In SMP systems, one idle task per CPU is forked by the worker thread from which the task structure is copied. The command name is, therefore, "kworker/0:0" or "kworker/0:1", if not updated. Since such update was lacking, all idle tasks in SMP systems were incorrectly named. This longtime bug was not discovered immediately, because there is no /proc/0 entry - the bug only becomes apparent when tracing is enabled. This patch sets the command name of the idle tasks in SMP systems to the name that is used in the INIT_TASK structure suffixed by a slash and the number of the CPU. Signed-off-by: NCarsten Emde <C.Emde@osadl.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20111026211708.768925506@osadl.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 11月, 2011 6 次提交
-
-
由 Inki Dae 提交于
Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Marcin Slusarz 提交于
Nouveau, when configured with debugfs, creates debugfs files for every channel, so structure holding list of files needs to be protected from simultaneous changes by multiple threads. Without this patch it's possible to hit kernel oops in drm_debugfs_remove_files just by running a couple of xterms with looped glxinfo. Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
This patch moves PORT_xx helper macro to sh_pfc.h, and it expects CPU_ALL_PORT() macro for each CPU Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
This patch move PORT_DATA_xx helper macro to sh_pfc.h. and pfc-sh7372.c used it Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Now that all of the named string association with clocks has been migrated to clkdev lookups there's no meaningful named topology that can be constructed for a debugfs tree view. Get rid of the left over bits, and shrink struct clk a bit in the process. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 09 11月, 2011 1 次提交
-
-
由 Keng-Yu Lin 提交于
Signed-off-by: NKeng-Yu Lin <kengyu@canonical.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 08 11月, 2011 2 次提交
-
-
由 Axel Lin 提交于
Fix below build warning: CC arch/arm/mach-omap2/hwspinlock.o In file included from arch/arm/mach-omap2/hwspinlock.c:22: include/linux/hwspinlock.h: In function '__hwspin_unlock': include/linux/hwspinlock.h:121: warning: 'return' with a value, in function returning void Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
-
由 Jonathan Corbet 提交于
The "private_date" field in struct devfreq_dev_status almost certainly wants to be "private_data"; since there are no in-tree users of this functionality, now seems like an easy time to make the fix. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 07 11月, 2011 7 次提交
-
-
由 Deepthi Dharwar 提交于
This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: NTrinabh Gupta <g.trinabh@gmail.com> Tested-by: NJean Pihet <j-pihet@ti.com> Reviewed-by: NKevin Hilman <khilman@ti.com> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Deepthi Dharwar 提交于
This is the first step towards global registration of cpuidle states. The statistics used primarily by the governor are per-cpu and have to be split from rest of the fields inside cpuidle_state, which would be made global i.e. single copy. The driver_data field is also per-cpu and moved. Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: NTrinabh Gupta <g.trinabh@gmail.com> Tested-by: NJean Pihet <j-pihet@ti.com> Reviewed-by: NKevin Hilman <khilman@ti.com> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Deepthi Dharwar 提交于
The cpuidle_device->prepare() mechanism causes updates to the cpuidle_state[].flags, setting and clearing CPUIDLE_FLAG_IGNORE to tell the governor not to chose a state on a per-cpu basis at run-time. State demotion is now handled by the driver and it returns the actual state entered. Hence, this mechanism is not required. Also this removes per-cpu flags from cpuidle_state enabling it to be made global. Reference: https://lkml.org/lkml/2011/3/25/52Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm> Signed-off-by: NTrinabh Gupta <g.trinabh@gmail.com> Tested-by: NJean Pihet <j-pihet@ti.com> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Reviewed-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Deepthi Dharwar 提交于
Cpuidle governor only suggests the state to enter using the governor->select() interface, but allows the low level driver to override the recommended state. The actual entered state may be different because of software or hardware demotion. Software demotion is done by the back-end cpuidle driver and can be accounted correctly. Current cpuidle code uses last_state field to capture the actual state entered and based on that updates the statistics for the state entered. Ideally the driver enter routine should update the counters, and it should return the state actually entered rather than the time spent there. The generic cpuidle code should simply handle where the counters live in the sysfs namespace, not updating the counters. Reference: https://lkml.org/lkml/2011/3/25/52Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: NTrinabh Gupta <g.trinabh@gmail.com> Tested-by: NJean Pihet <j-pihet@ti.com> Reviewed-by: NKevin Hilman <khilman@ti.com> Acked-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NKevin Hilman <khilman@ti.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bart Van Assche 提交于
Recently the ACPI ops structs were constified but the inline version of register_hotplug_dock_device() was overlooked (see also commit 9c8b04be, June 25 2011). Update the inline function register_hotplug_dock_device() that is enabled with CONFIG_ACPI_DOCK=n too. This patch fixes at least the following compiler warnings: drivers/ata/libata-acpi.c: In function .ata_acpi_associate.: drivers/ata/libata-acpi.c:266:11: warning: passing argument 2 of .register_hotplug_dock_device. discards qualifiers from pointer target type include/acpi/acpi_drivers.h:146:19: note: expected .struct acpi_dock_ops *. but argument is of type .const struct acpi_dock_ops *. drivers/ata/libata-acpi.c:275:11: warning: passing argument 2 of .register_hotplug_dock_device. discards qualifiers from pointer target type include/acpi/acpi_drivers.h:146:19: note: expected .struct acpi_dock_ops *. but argument is of type .const struct acpi_dock_ops *. Cc: stable@vger.kernel.org Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Rafael J. Wysocki 提交于
ACPI_NO_HARDWARE_INIT is only used by acpi_early_init() and acpi_bus_init() when calling acpi_enable_subsystem(), but acpi_enable_subsystem() doesn't check that flag, so it can be dropped. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Ben Hutchings 提交于
Use of the GPL or a compatible licence doesn't necessarily make the code any good. We already consider staging modules to be suspect, and this should also be true for out-of-tree modules which may receive very little review. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Reviewed-by: NDave Jones <davej@redhat.com> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (patched oops-tracing.txt)
-
- 05 11月, 2011 7 次提交
-
-
由 Mark Brown 提交于
Occasionally we may see an accessory reported before we have a stable impedance for the accessory. If this happens then reread the status in order to ensure that the handler can take the appropriate action for the status change. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Dan Carpenter 提交于
slave->duplex is a u8 type so the in bond_info_show_slave() when we check "if (slave->duplex == -1)", it's always false. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
The documentation for how the length of attributes is checked is wrong ("Exact length" isn't true, the policy checks are for "minimum length") and a bit misleading. Make it more complete and explain what really happens. Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oleg Nesterov 提交于
Commit 27920651 "PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too" updated fake_signal_wake_up() used by freezer to wake up KILLABLE tasks. Sending unsolicited wakeups to tasks in killable sleep is dangerous as there are code paths which depend on tasks not waking up spuriously from KILLABLE sleep. For example. sys_read() or page can sleep in TASK_KILLABLE assuming that wait/down/whatever _killable can only fail if we can not return to the usermode. TASK_TRACED is another obvious example. The offending commit was to resolve freezer hang during system PM operations caused by KILLABLE sleeps in network filesystems. wait_event_freezekillable(), which depends on the spurious KILLABLE wakeup, was added by f06ac72e "cifs, freezer: add wait_event_freezekillable and have cifs use it" to be used to implement killable & freezable sleeps in network filesystems. To prepare for reverting of 27920651, this patch reimplements wait_event_freezekillable() using freezer_do_not_count/freezer_count() so that it doesn't depend on the spurious KILLABLE wakeup. This isn't very nice but should do for now. [tj: Refreshed patch to apply to linus/master and updated commit description on Rafael's request.] Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Tony Lindgren 提交于
Commit 03ca370f (PM / OPP: Add OPP availability change notifier) does not compile if CONFIG_PM_OPP is not set: arch/arm/plat-omap/omap-pm-noop.o: In function `opp_get_notifier': include/linux/opp.h:103: multiple definition of `opp_get_notifier' include/linux/opp.h:103: first defined here Also fix incorrect comment. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Srivatsa S. Bhat 提交于
Remove the suspend_cpu_hotplug declaration, which doesn't correspond to an existing variable. [rjw: Added the changelog.] Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Johannes Berg 提交于
The warning really shouldn't happen, but until we find the reason why it does don't spew it all the time, just once is enough to know we've hit it. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 04 11月, 2011 15 次提交
-
-
由 Kuninori Morimoto 提交于
This provides a clk_rate_mult_range_round() helper for use by some of the CPG PLL ranged multipliers, following the same approach as used by the div ranges. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Phil Edworthy 提交于
This fixes up support for SH-2(A) SCIFs by introducing a new regtype. As expected, it's close to the SH-4A SCIF with fifodata, but still different enough to warrant its own type. Fixes up a number of FIFO overflows and similar for both SH7203/SH7264. Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com> Tested-by: NFederico Fuga <fuga@studiofuga.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Christoph Hellwig 提交于
All ->execute_task instances now need to complete the I/O explicitly, which can either happen synchronously or asynchronously. Note that a lot of the CDB emulations appear to return success even if some lowlevel operations failed. Given that this is an existing issue this patch doesn't change that fact. (nab: Adding missing switch breaks in PR-IN + PR_OUT) Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Christoph Hellwig 提交于
We want to be able to handle all CDBs through it and remove hacks like always using the first task in a CDB in target_report_luns. Also rename the callback to ->execute_task to better describe its use. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
This patch adds the initial pieces of generic active I/O shutdown logic. This is intended to be a 'opt-in' feature for fabric modules that includes the following functions to provide a mechinism for fabric modules to track se_cmd via se_session->sess_cmd_list: *) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called from fabric module incoming I/O path. *) target_put_sess_cmd() - Check for completion or drop se_cmd from ->sess_cmd_list *) target_splice_sess_cmd_list() - Splice active I/O list from ->sess_cmd_list to ->sess_wait_list, can called with HW fabric lock held. *) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on individual ->cmd_wait_comp. Optional transport_wait_for_tasks() call. target_splice_sess_cmd_list() is allowed to be called under HW fabric lock, and performs the splice into se_sess->sess_wait_list and set se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list waiting for individual target_put_sess_cmd() fabric callbacks to complete. It also adds TFO->check_release_cmd() to split the completion and memory release calls, where a fabric module uses target_put_sess_cmd() to check for I/O completion during session shutdown. This is currently pushed out into fabric modules as current fabric code may sleep here waiting for TFO->check_stop_free() to complete in main response path, and because target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric descriptor memory directly. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
-
由 Stephen Warren 提交于
The patch adds an empty function for non-dt build, so that drivers migrating to dt can save some '#ifdef CONFIG_OF'. v3: New patch Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Scott Jiang 提交于
no mmu system needs get_unmapped_area file operations to do mmap Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
This driver exposes preview mode operation of the S5K6AAFX sensor with embedded SoC ISP. The native capture (snapshot) operation mode is not supported. Following controls are available: manual/auto exposure and gain, power line frequency (anti-flicker), saturation, sharpness, brightness, contrast, white balance temperature, color effects, horizontal/vertical image flip, frame interval, auto white balance. RGB component gains are currently exposed through private controls. Reviewed-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sylwester Nawrocki 提交于
V4L2_CID_POWER_LINE_FREQUENCY control allows applications to instruct a driver what is the power line frequency so an appropriate filter can be used by the device to cancel flicker by compensating the light intensity ripple. Currently in the menu we have entries for 50 Hz and 60 Hz and for entirely disabling the anti-flicker filter. However some devices are capable of automatically detecting the frequency, so add V4L2_CID_POWER_LINE_FREQUENCY_AUTO entry for them. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
The most important change in this patch is direct linking to struct soc_camera_link via the client->dev.platform_data pointer. This makes most of the soc-camera client drivers also usable outside of the soc-camera framework. After this change all what is needed for these drivers to function are inclusions of soc-camera headers for some convenience macros, suitably configured platform data, which is anyway always required, and loaded soc-camera core module for library functions. If desired, these library functions can be made generic in the future and moved to a more neutral location. The only two client drivers, that still depend on soc-camera are: mt9t031: it uses struct video_device for its PM. Since no hardware is available, alternative methods cannot be tested. ov6650: it uses struct soc_camera_device to pass its sense data back to the bridge driver. A generic v4l2-subdevice approach should be developed to perform this. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
VIDIOC_G_STD can return the current TV-norm to the user in one of two ways: if an .vidioc_g_std() ioctl operation is provided by the driver, it is called, otherwise the value ot the .current_norm field of struct video_device is returned. Since subdevice drivers currently have no access to struct video_device objects, the only way to provide this information to the user is by implementing a .g_std() method. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Currently only very few drivers actually use video_device nodes, embedded in struct v4l2_subdev. Allocate these nodes dynamically for those drivers to save memory for the rest. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Using the internally cached pixel code, instead of the one, provided by the soc-camera, removes one more use of struct soc_camera_device in these drivers. Also remove the no longer needed soc_camera_from_i2c() inline function. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Remove most trivial uses of struct soc_camera_device from most client drivers, abstracting some of them inside inline functions. Next steps will eliminate remaining uses and modify inline functions to not use struct soc_camera_device. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-