Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Add info->archdata field
  i2c: Inform about deprecated chips directory
  i2c: Use pci_ioremap_bar()
  Schedule removal of the legacy i2c device driver binding model
  i2c: Clean up <linux/i2c.h>
  i2c: Update and clean up writing-clients document
  i2c: Drop 2-byte address block transfer defines
  i2c: Delete legacy model documentation
  i2c: Constify i2c_get_clientdata's parameter
  i2c: Delete outdated client porting guide
  i2c: Make clear what the class field of i2c_adapter is good for
  i2c-algo-pcf: Fix typo in debugging log message
  i2c-algo-pcf: Add adapter hooks around xfer begin and end
  i2c-algo-pcf: Pass adapter data into ->waitforpin() method
  i2c-i801: Add support for Intel Ibex Peak

Documentation/feature-removal-schedule.txt

@@ -359,3 +359,11 @@ Why:  The 2.6 kernel supports direct writing to ide CD drives, which
       eliminates the need for ide-scsi. The new method is more
       efficient in every way.
 Who:  FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+---------------------------
+
+What:	i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client()
+When:	2.6.29 (ideally) or 2.6.30 (more likely)
+Why:	Deprecated by the new (standard) device driver binding model. Use
+	i2c_driver->probe() and ->remove() instead.
+Who:	Jean Delvare <khali@linux-fr.org>

Documentation/i2c/busses/i2c-i801

@@ -13,8 +13,9 @@ Supported adapters:
   * Intel 631xESB/632xESB (ESB2)
   * Intel 82801H (ICH8)
   * Intel 82801I (ICH9)
-  * Intel Tolapai
-  * Intel ICH10
+  * Intel EP80579 (Tolapai)
+  * Intel 82801JI (ICH10)
+  * Intel PCH
    Datasheets: Publicly available at the Intel website
 
 Authors: 
@@ -32,7 +33,7 @@ Description
 -----------
 
 The ICH (properly known as the 82801AA), ICH0 (82801AB), ICH2 (82801BA),
-ICH3 (82801CA/CAM) and later devices are Intel chips that are a part of
+ICH3 (82801CA/CAM) and later devices (PCH) are Intel chips that are a part of
 Intel's '810' chipset for Celeron-based PCs, '810E' chipset for
 Pentium-based PCs, '815E' chipset, and others.
 

Documentation/i2c/porting-clients

-Revision 7, 2007-04-19
-Jean Delvare <khali@linux-fr.org>
-Greg KH <greg@kroah.com>
-
-This is a guide on how to convert I2C chip drivers from Linux 2.4 to
-Linux 2.6. I have been using existing drivers (lm75, lm78) as examples.
-Then I converted a driver myself (lm83) and updated this document.
-Note that this guide is strongly oriented towards hardware monitoring
-drivers. Many points are still valid for other type of drivers, but
-others may be irrelevant.
-
-There are two sets of points below. The first set concerns technical
-changes. The second set concerns coding policy. Both are mandatory.
-
-Although reading this guide will help you porting drivers, I suggest
-you keep an eye on an already ported driver while porting your own
-driver. This will help you a lot understanding what this guide
-exactly means. Choose the chip driver that is the more similar to
-yours for best results.
-
-Technical changes:
-
-* [Driver type] Any driver that was relying on i2c-isa has to be
-  converted to a proper isa, platform or pci driver. This is not
-  covered by this guide.
-
-* [Includes] Get rid of "version.h" and <linux/i2c-proc.h>.
-  Includes typically look like that:
-  #include <linux/module.h>
-  #include <linux/init.h>
-  #include <linux/slab.h>
-  #include <linux/jiffies.h>
-  #include <linux/i2c.h>
-  #include <linux/hwmon.h>	/* for hardware monitoring drivers */
-  #include <linux/hwmon-sysfs.h>
-  #include <linux/hwmon-vid.h>	/* if you need VRM support */
-  #include <linux/err.h>	/* for class registration */
-  Please respect this inclusion order. Some extra headers may be
-  required for a given driver (e.g. "lm75.h").
-
-* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, ISA addresses
-  are no more handled by the i2c core. Address ranges are no more
-  supported either, define each individual address separately.
-  SENSORS_INSMOD_<n> becomes I2C_CLIENT_INSMOD_<n>.
-
-* [Client data] Get rid of sysctl_id. Try using standard names for
-  register values (for example, temp_os becomes temp_max). You're
-  still relatively free here, but you *have* to follow the standard
-  names for sysfs files (see the Sysctl section below).
-
-* [Function prototypes] The detect functions loses its flags
-  parameter. Sysctl (e.g. lm75_temp) and miscellaneous functions
-  are off the list of prototypes. This usually leaves five
-  prototypes:
-  static int lm75_attach_adapter(struct i2c_adapter *adapter);
-  static int lm75_detect(struct i2c_adapter *adapter, int address,
-      int kind);
-  static void lm75_init_client(struct i2c_client *client);
-  static int lm75_detach_client(struct i2c_client *client);
-  static struct lm75_data lm75_update_device(struct device *dev);
-
-* [Sysctl] All sysctl stuff is of course gone (defines, ctl_table
-  and functions). Instead, you have to define show and set functions for
-  each sysfs file. Only define set for writable values. Take a look at an
-  existing 2.6 driver for details (it87 for example). Don't forget
-  to define the attributes for each file (this is that step that
-  links callback functions). Use the file names specified in
-  Documentation/hwmon/sysfs-interface for the individual files. Also
-  convert the units these files read and write to the specified ones.
-  If you need to add a new type of file, please discuss it on the
-  sensors mailing list <lm-sensors@lm-sensors.org> by providing a
-  patch to the Documentation/hwmon/sysfs-interface file.
-
-* [Attach] The attach function should make sure that the adapter's
-  class has I2C_CLASS_HWMON (or whatever class is suitable for your
-  driver), using the following construct:
-  if (!(adapter->class & I2C_CLASS_HWMON))
-          return 0;
-  Call i2c_probe() instead of i2c_detect().
-
-* [Detect] As mentioned earlier, the flags parameter is gone.
-  The type_name and client_name strings are replaced by a single
-  name string, which will be filled with a lowercase, short string.
-  The labels used for error paths are reduced to the number needed.
-  It is advised that the labels are given descriptive names such as
-  exit and exit_free. Don't forget to properly set err before
-  jumping to error labels. By the way, labels should be left-aligned.
-  Use kzalloc instead of kmalloc.
-  Use i2c_set_clientdata to set the client data (as opposed to
-  a direct access to client->data).
-  Use strlcpy instead of strcpy or snprintf to copy the client name.
-  Replace the sysctl directory registration by calls to
-  device_create_file. Move the driver initialization before any
-  sysfs file creation.
-  Register the client with the hwmon class (using hwmon_device_register)
-  if applicable.
-  Drop client->id.
-  Drop any 24RF08 corruption prevention you find, as this is now done
-  at the i2c-core level, and doing it twice voids it.
-  Don't add I2C_CLIENT_ALLOW_USE to client->flags, it's the default now.
-
-* [Init] Limits must not be set by the driver (can be done later in
-  user-space). Chip should not be reset default (although a module
-  parameter may be used to force it), and initialization should be
-  limited to the strictly necessary steps.
-
-* [Detach] Remove the call to i2c_deregister_entry. Do not log an
-  error message if i2c_detach_client fails, as i2c-core will now do
-  it for you.
-  Unregister from the hwmon class if applicable.
-
-* [Update] The function prototype changed, it is now
-  passed a device structure, which you have to convert to a client
-  using to_i2c_client(dev). The update function should return a
-  pointer to the client data.
-  Don't access client->data directly, use i2c_get_clientdata(client)
-  instead.
-  Use time_after() instead of direct jiffies comparison.
-
-* [Interface] Make sure there is a MODULE_LICENSE() line, at the bottom
-  of the file (after MODULE_AUTHOR() and MODULE_DESCRIPTION(), in this
-  order).
-
-* [Driver] The flags field of the i2c_driver structure is gone.
-  I2C_DF_NOTIFY is now the default behavior.
-  The i2c_driver structure has a driver member, which is itself a
-  structure, those name member should be initialized to a driver name
-  string. i2c_driver itself has no name member anymore.
-
-* [Driver model] Instead of shutdown or reboot notifiers, provide a
-  shutdown() method in your driver.
-
-* [Power management] Use the driver model suspend() and resume()
-  callbacks instead of the obsolete pm_register() calls.
-
-Coding policy:
-
-* [Copyright] Use (C), not (c), for copyright.
-
-* [Debug/log] Get rid of #ifdef DEBUG/#endif constructs whenever you
-  can. Calls to printk for debugging purposes are replaced by calls to
-  dev_dbg where possible, else to pr_debug. Here is an example of how
-  to call it (taken from lm75_detect):
-  dev_dbg(&client->dev, "Starting lm75 update\n");
-  Replace other printk calls with the dev_info, dev_err or dev_warn
-  function, as appropriate.
-
-* [Constants] Constants defines (registers, conversions) should be
-  aligned. This greatly improves readability.
-  Alignments are achieved by the means of tabs, not spaces. Remember
-  that tabs are set to 8 in the Linux kernel code.
-
-* [Layout] Avoid extra empty lines between comments and what they
-  comment. Respect the coding style (see Documentation/CodingStyle),
-  in particular when it comes to placing curly braces.
-
-* [Comments] Make sure that no comment refers to a file that isn't
-  part of the Linux source tree (typically doc/chips/<chip name>),
-  and that remaining comments still match the code. Merging comment
-  lines when possible is encouraged.

drivers/i2c/algos/i2c-algo-pcf.c

@@ -135,7 +135,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) {
 	*status = get_pcf(adap, 1);
 #ifndef STUB_I2C
 	while (timeout-- && (*status & I2C_PCF_PIN)) {
-		adap->waitforpin();
+		adap->waitforpin(adap->data);
 		*status = get_pcf(adap, 1);
 	}
 	if (*status & I2C_PCF_LAB) {
@@ -208,7 +208,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
 		return -ENXIO;
 	}
 	
-	printk(KERN_DEBUG "i2c-algo-pcf.o: deteted and initialized PCF8584.\n");
+	printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n");
 
 	return 0;
 }
@@ -331,13 +331,16 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 	int i;
 	int ret=0, timeout, status;
     
+	if (adap->xfer_begin)
+		adap->xfer_begin(adap->data);
 
 	/* Check for bus busy */
 	timeout = wait_for_bb(adap);
 	if (timeout) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: "
 		            "Timeout waiting for BB in pcf_xfer\n");)
-		return -EIO;
+		i = -EIO;
+		goto out;
 	}
 	
 	for (i = 0;ret >= 0 && i < num; i++) {
@@ -359,12 +362,14 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 		if (timeout) {
 			if (timeout == -EINTR) {
 				/* arbitration lost */
-				return (-EINTR);
+				i = -EINTR;
+				goto out;
 			}
 			i2c_stop(adap);
 			DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting "
 				    "for PIN(1) in pcf_xfer\n");)
-			return (-EREMOTEIO);
+			i = -EREMOTEIO;
+			goto out;
 		}
     
 #ifndef STUB_I2C
@@ -372,7 +377,8 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 		if (status & I2C_PCF_LRB) {
 			i2c_stop(adap);
 			DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");)
-			return (-EREMOTEIO);
+			i = -EREMOTEIO;
+			goto out;
 		}
 #endif
     
@@ -404,6 +410,9 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 		}
 	}
 
+out:
+	if (adap->xfer_end)
+		adap->xfer_end(adap->data);
 	return (i);
 }
 

drivers/i2c/busses/Kconfig

@@ -97,6 +97,7 @@ config I2C_I801
 	    ICH9
 	    Tolapai
 	    ICH10
+	    PCH
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

drivers/i2c/busses/i2c-elektor.c

@@ -104,7 +104,8 @@ static int pcf_isa_getclock(void *data)
 	return (clock);
 }
 
-static void pcf_isa_waitforpin(void) {
+static void pcf_isa_waitforpin(void *data)
+{
 	DEFINE_WAIT(wait);
 	int timeout = 2;
 	unsigned long flags;

drivers/i2c/busses/i2c-hydra.c

@@ -123,7 +123,7 @@ static int __devinit hydra_probe(struct pci_dev *dev,
 				hydra_adap.name))
 		return -EBUSY;
 
-	hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0));
+	hydra_bit_data.data = pci_ioremap_bar(dev, 0);
 	if (hydra_bit_data.data == NULL) {
 		release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
 		return -ENODEV;

drivers/i2c/busses/i2c-i801.c

@@ -41,6 +41,7 @@
   Tolapai               0x5032     32     hard     yes     yes     yes
   ICH10                 0x3a30     32     hard     yes     yes     yes
   ICH10                 0x3a60     32     hard     yes     yes     yes
+  PCH                   0x3b30     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) },
 	{ 0, }
 };
 
@@ -599,6 +601,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
 	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
 	case PCI_DEVICE_ID_INTEL_ICH10_4:
 	case PCI_DEVICE_ID_INTEL_ICH10_5:
+	case PCI_DEVICE_ID_INTEL_PCH_SMBUS:
 		i801_features |= FEATURE_I2C_BLOCK_READ;
 		/* fall through */
 	case PCI_DEVICE_ID_INTEL_82801DB_3:

drivers/i2c/chips/Kconfig

 #
 # Miscellaneous I2C chip drivers configuration
 #
+# *** DEPRECATED! Do not add new entries! See Makefile ***
+#
 
 menu "Miscellaneous I2C Chip support"
 

drivers/i2c/chips/Makefile

 #
 # Makefile for miscellaneous I2C chip drivers.
 #
-# Think twice before you add a new driver to this directory.
+# Do not add new drivers to this directory! It is DEPRECATED.
+#
 # Device drivers are better grouped according to the functionality they
 # implement rather than to the bus they are connected to. In particular:
 # * Hardware monitoring chip drivers go to drivers/hwmon

drivers/i2c/i2c-core.c

@@ -266,6 +266,9 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 
 	client->dev.platform_data = info->platform_data;
 
+	if (info->archdata)
+		client->dev.archdata = *info->archdata;
+
 	client->flags = info->flags;
 	client->addr = info->addr;
 	client->irq = info->irq;

include/linux/device.h

@@ -450,7 +450,7 @@ static inline void set_dev_node(struct device *dev, int node)
 }
 #endif
 
-static inline void *dev_get_drvdata(struct device *dev)
+static inline void *dev_get_drvdata(const struct device *dev)
 {
 	return dev->driver_data;
 }

include/linux/i2c-algo-pcf.h

@@ -31,7 +31,10 @@ struct i2c_algo_pcf_data {
 	int  (*getpcf) (void *data, int ctl);
 	int  (*getown) (void *data);
 	int  (*getclock) (void *data);
-	void (*waitforpin) (void);
+	void (*waitforpin) (void *data);
+
+	void (*xfer_begin) (void *data);
+	void (*xfer_end) (void *data);
 
 	/* Multi-master lost arbitration back-off delay (msecs)
 	 * This should be set by the bus adapter or knowledgable client

include/linux/i2c.h

@@ -53,45 +53,44 @@ struct i2c_board_info;
  * transmit one message at a time, a more complex version can be used to
  * transmit an arbitrary number of messages without interruption.
  */
-extern int i2c_master_send(struct i2c_client *,const char* ,int);
-extern int i2c_master_recv(struct i2c_client *,char* ,int);
+extern int i2c_master_send(struct i2c_client *client, const char *buf,
+			   int count);
+extern int i2c_master_recv(struct i2c_client *client, char *buf, int count);
 
 /* Transfer num messages.
  */
-extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
-
+extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			int num);
 
 /* This is the very generalized SMBus access routine. You probably do not
    want to use this, though; one of the functions below may be much easier,
    and probably just as fast.
    Note that we use i2c_adapter here, because you do not need a specific
    smbus adapter to call this function. */
-extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
-                           unsigned short flags,
-                           char read_write, u8 command, int size,
-                           union i2c_smbus_data * data);
+extern s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+			  unsigned short flags, char read_write, u8 command,
+			  int size, union i2c_smbus_data *data);
 
 /* Now follow the 'nice' access routines. These also document the calling
    conventions of i2c_smbus_xfer. */
 
-extern s32 i2c_smbus_read_byte(struct i2c_client * client);
-extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value);
-extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command);
-extern s32 i2c_smbus_write_byte_data(struct i2c_client * client,
-                                     u8 command, u8 value);
-extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command);
-extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
-                                     u8 command, u16 value);
+extern s32 i2c_smbus_read_byte(struct i2c_client *client);
+extern s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value);
+extern s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command);
+extern s32 i2c_smbus_write_byte_data(struct i2c_client *client,
+				     u8 command, u8 value);
+extern s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command);
+extern s32 i2c_smbus_write_word_data(struct i2c_client *client,
+				     u8 command, u16 value);
 /* Returns the number of read bytes */
 extern s32 i2c_smbus_read_block_data(struct i2c_client *client,
 				     u8 command, u8 *values);
-extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
-				      u8 command, u8 length,
-				      const u8 *values);
+extern s32 i2c_smbus_write_block_data(struct i2c_client *client,
+				      u8 command, u8 length, const u8 *values);
 /* Returns the number of read bytes */
-extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
+extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client,
 					 u8 command, u8 length, u8 *values);
-extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
+extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
 					  u8 command, u8 length,
 					  const u8 *values);
 
@@ -169,7 +168,7 @@ struct i2c_driver {
 	/* a ioctl like command that can be used to perform specific functions
 	 * with the device.
 	 */
-	int (*command)(struct i2c_client *client,unsigned int cmd, void *arg);
+	int (*command)(struct i2c_client *client, unsigned int cmd, void *arg);
 
 	struct device_driver driver;
 	const struct i2c_device_id *id_table;
@@ -224,14 +223,14 @@ static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
 	return to_i2c_client(dev);
 }
 
-static inline void *i2c_get_clientdata (struct i2c_client *dev)
+static inline void *i2c_get_clientdata(const struct i2c_client *dev)
 {
-	return dev_get_drvdata (&dev->dev);
+	return dev_get_drvdata(&dev->dev);
 }
 
-static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
+static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
 {
-	dev_set_drvdata (&dev->dev, data);
+	dev_set_drvdata(&dev->dev, data);
 }
 
 /**
@@ -240,6 +239,7 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
  * @flags: to initialize i2c_client.flags
  * @addr: stored in i2c_client.addr
  * @platform_data: stored in i2c_client.dev.platform_data
+ * @archdata: copied into i2c_client.dev.archdata
  * @irq: stored in i2c_client.irq
  *
  * I2C doesn't actually support hardware probing, although controllers and
@@ -259,6 +259,7 @@ struct i2c_board_info {
 	unsigned short	flags;
 	unsigned short	addr;
 	void		*platform_data;
+	struct dev_archdata	*archdata;
 	int		irq;
 };
 
@@ -272,7 +273,7 @@ struct i2c_board_info {
  * fields (such as associated irq, or device-specific platform_data)
  * are provided using conventional syntax.
  */
-#define I2C_BOARD_INFO(dev_type,dev_addr) \
+#define I2C_BOARD_INFO(dev_type, dev_addr) \
 	.type = (dev_type), .addr = (dev_addr)
 
 
@@ -306,10 +307,12 @@ extern void i2c_unregister_device(struct i2c_client *);
  */
 #ifdef CONFIG_I2C_BOARDINFO
 extern int
-i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n);
+i2c_register_board_info(int busnum, struct i2c_board_info const *info,
+			unsigned n);
 #else
 static inline int
-i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n)
+i2c_register_board_info(int busnum, struct i2c_board_info const *info,
+			unsigned n)
 {
 	return 0;
 }
@@ -328,11 +331,11 @@ struct i2c_algorithm {
 	   using common I2C messages */
 	/* master_xfer should return the number of messages successfully
 	   processed, or a negative value on error */
-	int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
-	                   int num);
+	int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs,
+			   int num);
 	int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
-	                   unsigned short flags, char read_write,
-	                   u8 command, int size, union i2c_smbus_data * data);
+			   unsigned short flags, char read_write,
+			   u8 command, int size, union i2c_smbus_data *data);
 
 	/* To determine what the adapter supports */
 	u32 (*functionality) (struct i2c_adapter *);
@@ -345,7 +348,7 @@ struct i2c_algorithm {
 struct i2c_adapter {
 	struct module *owner;
 	unsigned int id;
-	unsigned int class;
+	unsigned int class;		  /* classes to allow probing for */
 	const struct i2c_algorithm *algo; /* the algorithm to access the bus */
 	void *algo_data;
 
@@ -369,14 +372,14 @@ struct i2c_adapter {
 };
 #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
 
-static inline void *i2c_get_adapdata (struct i2c_adapter *dev)
+static inline void *i2c_get_adapdata(const struct i2c_adapter *dev)
 {
-	return dev_get_drvdata (&dev->dev);
+	return dev_get_drvdata(&dev->dev);
 }
 
-static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data)
+static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data)
 {
-	dev_set_drvdata (&dev->dev, data);
+	dev_set_drvdata(&dev->dev, data);
 }
 
 /*flags for the client struct: */
@@ -449,7 +452,7 @@ extern int i2c_probe(struct i2c_adapter *adapter,
 		const struct i2c_client_address_data *address_data,
 		int (*found_proc) (struct i2c_adapter *, int, int));
 
-extern struct i2c_adapter* i2c_get_adapter(int id);
+extern struct i2c_adapter *i2c_get_adapter(int id);
 extern void i2c_put_adapter(struct i2c_adapter *adap);
 
 
@@ -465,7 +468,7 @@ static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func)
 	return (func & i2c_get_functionality(adap)) == func;
 }
 
-/* Return id number for a specific adapter */
+/* Return the adapter number for a specific adapter */
 static inline int i2c_adapter_id(struct i2c_adapter *adap)
 {
 	return adap->nr;
@@ -526,7 +529,7 @@ struct i2c_msg {
 
 #define I2C_FUNC_I2C			0x00000001
 #define I2C_FUNC_10BIT_ADDR		0x00000002
-#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
+#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_NOSTART etc. */
 #define I2C_FUNC_SMBUS_PEC		0x00000008
 #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
 #define I2C_FUNC_SMBUS_QUICK		0x00010000
@@ -541,30 +544,26 @@ struct i2c_msg {
 #define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
 #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
-#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2	 0x10000000 /* I2C-like block xfer  */
-#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */
-
-#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
-                             I2C_FUNC_SMBUS_WRITE_BYTE)
-#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
-                                  I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
-#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
-                                  I2C_FUNC_SMBUS_WRITE_WORD_DATA)
-#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
-                                   I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
-#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
-                                  I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
-#define I2C_FUNC_SMBUS_I2C_BLOCK_2 (I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \
-                                    I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2)
-
-#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
-                             I2C_FUNC_SMBUS_BYTE | \
-                             I2C_FUNC_SMBUS_BYTE_DATA | \
-                             I2C_FUNC_SMBUS_WORD_DATA | \
-                             I2C_FUNC_SMBUS_PROC_CALL | \
-                             I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
-			     I2C_FUNC_SMBUS_I2C_BLOCK | \
-			     I2C_FUNC_SMBUS_PEC)
+
+#define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA	(I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA	(I2C_FUNC_SMBUS_READ_WORD_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA	(I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK	(I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
+
+#define I2C_FUNC_SMBUS_EMUL		(I2C_FUNC_SMBUS_QUICK | \
+					 I2C_FUNC_SMBUS_BYTE | \
+					 I2C_FUNC_SMBUS_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WORD_DATA | \
+					 I2C_FUNC_SMBUS_PROC_CALL | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_PEC)
 
 /*
  * Data for SMBus Messages
@@ -574,7 +573,7 @@ union i2c_smbus_data {
 	__u8 byte;
 	__u16 word;
 	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
-	                       /* and one more for user-space compatibility */
+			       /* and one more for user-space compatibility */
 };
 
 /* i2c_smbus_xfer read or write markers */
@@ -602,21 +601,21 @@ union i2c_smbus_data {
 
 /* Default fill of many variables */
 #define I2C_CLIENT_DEFAULTS {I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
-                          I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END}
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \
+			     I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END}
 
 /* I2C_CLIENT_MODULE_PARM creates a module parameter, and puts it in the
    module header */
@@ -625,7 +624,7 @@ union i2c_smbus_data {
   static unsigned short var[I2C_CLIENT_MAX_OPTS] = I2C_CLIENT_DEFAULTS; \
   static unsigned int var##_num; \
   module_param_array(var, short, &var##_num, 0); \
-  MODULE_PARM_DESC(var,desc)
+  MODULE_PARM_DESC(var, desc)
 
 #define I2C_CLIENT_MODULE_PARM_FORCE(name)				\
 I2C_CLIENT_MODULE_PARM(force_##name,					\