提交 e27a93a9 编写于 作者: T Tony Lindgren

ARM: OMAP1: Misc clean-up

This patch cleans up omap1 files to sync up with linux-omap tree:

- Remove omap-generic MMC config as it should be defined in board-*.c files
  instead of using board-generic.c
- New style I2C board_info from David Brownell <dbrownell@users.sourceforge.net>
- Init section fixes from Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 80dbfde5
......@@ -55,33 +55,14 @@ static struct omap_usb_config generic1610_usb_config __initdata = {
.hmc_mode = 16,
.pins[0] = 6,
};
static struct omap_mmc_config generic_mmc_config __initdata = {
.mmc [0] = {
.enabled = 0,
.wire4 = 0,
.wp_pin = -1,
.power_pin = -1,
.switch_pin = -1,
},
.mmc [1] = {
.enabled = 0,
.wire4 = 0,
.wp_pin = -1,
.power_pin = -1,
.switch_pin = -1,
},
};
#endif
static struct omap_uart_config generic_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel generic_config[] = {
{ OMAP_TAG_USB, NULL },
{ OMAP_TAG_MMC, &generic_mmc_config },
static struct omap_board_config_kernel generic_config[] __initdata = {
{ OMAP_TAG_USB, NULL },
{ OMAP_TAG_UART, &generic_uart_config },
};
......
......@@ -37,6 +37,7 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/arch/gpio-switch.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/nand.h>
......@@ -47,8 +48,6 @@
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>
extern int omap_gpio_init(void);
static int h2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
......@@ -341,22 +340,6 @@ static struct platform_device *h2_devices[] __initdata = {
&h2_mcbsp1_device,
};
#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata h2_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
.type = "tps65010",
.irq = OMAP_GPIO_IRQ(58),
},
/* TODO when driver support is ready:
* - isp1301 OTG transceiver
* - optional ov9640 camera sensor at 0x30
* - pcf9754 for aGPS control
* - ... etc
*/
};
#endif
static void __init h2_init_smc91x(void)
{
if ((omap_request_gpio(0)) < 0) {
......@@ -365,6 +348,14 @@ static void __init h2_init_smc91x(void)
}
}
static struct i2c_board_info __initdata h2_i2c_board_info[] = {
{
I2C_BOARD_INFO("isp1301_omap", 0x2d),
.type = "isp1301_omap",
.irq = OMAP_GPIO_IRQ(2),
},
};
static void __init h2_init_irq(void)
{
omap1_init_common_hw();
......@@ -461,11 +452,6 @@ static void __init h2_init(void)
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
h2_mmc_init();
/* irq for tps65010 chip */
omap_cfg_reg(W4_GPIO58);
if (gpio_request(58, "tps65010") == 0)
gpio_direction_input(58);
}
static void __init h2_map_io(void)
......@@ -473,22 +459,6 @@ static void __init h2_map_io(void)
omap1_map_common_io();
}
#ifdef CONFIG_TPS65010
static int __init h2_tps_init(void)
{
if (!machine_is_omap_h2())
return 0;
/* gpio3 for SD, gpio4 for VDD_DSP */
/* FIXME send power to DSP iff it's configured */
/* Enable LOW_PWR */
tps65010_set_low_pwr(ON);
return 0;
}
fs_initcall(h2_tps_init);
#endif
MACHINE_START(OMAP_H2, "TI-H2")
/* Maintainer: Imre Deak <imre.deak@nokia.com> */
.phys_io = 0xfff00000,
......
......@@ -51,8 +51,6 @@
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>
extern int omap_gpio_init(void);
static int h3_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
......@@ -452,26 +450,13 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h3_config[] = {
static struct omap_board_config_kernel h3_config[] __initdata = {
{ OMAP_TAG_USB, &h3_usb_config },
{ OMAP_TAG_MMC, &h3_mmc_config },
{ OMAP_TAG_UART, &h3_uart_config },
{ OMAP_TAG_LCD, &h3_lcd_config },
};
static struct i2c_board_info __initdata h3_i2c_board_info[] = {
{
I2C_BOARD_INFO("tps65010", 0x48),
.type = "tps65013",
/* .irq = OMAP_GPIO_IRQ(??), */
},
/* TODO when driver support is ready:
* - isp1301 OTG transceiver
* - optional ov9640 camera sensor at 0x30
* - ...
*/
};
static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
{
.name = "mmc_slot",
......@@ -514,6 +499,8 @@ static void __init h3_init(void)
omap_cfg_reg(V2_1710_GPIO10);
platform_add_devices(devices, ARRAY_SIZE(devices));
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
omap_board_config = h3_config;
omap_board_config_size = ARRAY_SIZE(h3_config);
omap_serial_init();
......@@ -544,23 +531,6 @@ static void __init h3_map_io(void)
omap1_map_common_io();
}
#ifdef CONFIG_TPS65010
static int __init h3_tps_init(void)
{
if (!machine_is_omap_h3())
return 0;
/* gpio4 for SD, gpio3 for VDD_DSP */
/* FIXME send power to DSP iff it's configured */
/* Enable LOW_PWR */
tps65013_set_low_pwr(ON);
return 0;
}
fs_initcall(h3_tps_init);
#endif
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
/* Maintainer: Texas Instruments, Inc. */
.phys_io = 0xfff00000,
......
......@@ -189,7 +189,7 @@ static struct omap_mmc_config nokia770_mmc_config __initdata = {
},
};
static struct omap_board_config_kernel nokia770_config[] = {
static struct omap_board_config_kernel nokia770_config[] __initdata = {
{ OMAP_TAG_USB, NULL },
{ OMAP_TAG_MMC, &nokia770_mmc_config },
};
......
......@@ -253,7 +253,7 @@ static struct omap_lcd_config osk_lcd_config __initdata = {
};
#endif
static struct omap_board_config_kernel osk_config[] = {
static struct omap_board_config_kernel osk_config[] __initdata = {
{ OMAP_TAG_USB, &osk_usb_config },
{ OMAP_TAG_UART, &osk_uart_config },
#ifdef CONFIG_OMAP_OSK_MISTRAL
......
......@@ -312,7 +312,7 @@ static struct omap_uart_config palmtt_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
static struct omap_board_config_kernel palmtt_config[] = {
static struct omap_board_config_kernel palmtt_config[] __initdata = {
{ OMAP_TAG_USB, &palmtt_usb_config },
{ OMAP_TAG_LCD, &palmtt_lcd_config },
{ OMAP_TAG_UART, &palmtt_uart_config },
......
......@@ -285,7 +285,7 @@ static struct omap_uart_config palmz71_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
static struct omap_board_config_kernel palmz71_config[] = {
static struct omap_board_config_kernel palmz71_config[] __initdata = {
{OMAP_TAG_USB, &palmz71_usb_config},
{OMAP_TAG_MMC, &palmz71_mmc_config},
{OMAP_TAG_LCD, &palmz71_lcd_config},
......
......@@ -216,7 +216,7 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel perseus2_config[] = {
static struct omap_board_config_kernel perseus2_config[] __initdata = {
{ OMAP_TAG_UART, &perseus2_uart_config },
{ OMAP_TAG_LCD, &perseus2_lcd_config },
};
......
......@@ -268,21 +268,6 @@ static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
/* PCR0 =0f0f */
};
/* TODO: PCM interface - McBSP2 */
static struct omap_mcbsp_reg_cfg mcbsp2_regs = {
.spcr2 = FRST | GRST | XRST | XINTM(3), /* SPCR2=F1 */
.spcr1 = RINTM(3) | RRST, /* SPCR1=30 */
.rcr2 = 0, /* RCR2 =00 */
.rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1 = 140 */
.xcr2 = 0, /* XCR2 = 0 */
.xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */
.srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */
.srgr2 = FSGM | FPER(31), /* SRGR2=101f */
.pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
/* PCR0=0f0f */
/* mcbsp: slave */
};
static struct omap_alsa_codec_config sx1_alsa_config = {
.name = "SX1 EGold",
.mcbsp_regs_alsa = &mcbsp1_regs,
......@@ -395,11 +380,8 @@ static struct omap_usb_config sx1_usb_config __initdata = {
static struct omap_mmc_config sx1_mmc_config __initdata = {
.mmc [0] = {
.enabled = 1,
.enabled = 1,
.wire4 = 0,
.wp_pin = -1,
.power_pin = -1, /* power is in Sofia */
.switch_pin = OMAP_MPUIO(3),
},
};
......@@ -428,13 +410,15 @@ static struct omap_uart_config sx1_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel sx1_config[] = {
static struct omap_board_config_kernel sx1_config[] __initdata = {
{ OMAP_TAG_USB, &sx1_usb_config },
{ OMAP_TAG_MMC, &sx1_mmc_config },
{ OMAP_TAG_LCD, &sx1_lcd_config },
{ OMAP_TAG_UART, &sx1_uart_config },
};
/*-----------------------------------------*/
static void __init omap_sx1_init(void)
{
platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
......
......@@ -34,9 +34,6 @@
#include <asm/arch/tc.h>
#include <asm/arch/usb.h>
extern void omap_init_time(void);
extern int omap_gpio_init(void);
static struct plat_serial8250_port voiceblue_ports[] = {
{
.mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
......
......@@ -51,7 +51,7 @@ static inline void mbox_write_reg(unsigned int val, unsigned int reg)
}
/* msg */
static inline mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox)
static mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox)
{
struct omap_mbox1_fifo *fifo =
&((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
......@@ -63,7 +63,7 @@ static inline mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox)
return msg;
}
static inline void
static void
omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
{
struct omap_mbox1_fifo *fifo =
......@@ -73,12 +73,12 @@ omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
mbox_write_reg(msg >> 16, fifo->cmd);
}
static inline int omap1_mbox_fifo_empty(struct omap_mbox *mbox)
static int omap1_mbox_fifo_empty(struct omap_mbox *mbox)
{
return 0;
}
static inline int omap1_mbox_fifo_full(struct omap_mbox *mbox)
static int omap1_mbox_fifo_full(struct omap_mbox *mbox)
{
struct omap_mbox1_fifo *fifo =
&((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
......@@ -87,21 +87,21 @@ static inline int omap1_mbox_fifo_full(struct omap_mbox *mbox)
}
/* irq */
static inline void
static void
omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
{
if (irq == IRQ_RX)
enable_irq(mbox->irq);
}
static inline void
static void
omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
{
if (irq == IRQ_RX)
disable_irq(mbox->irq);
}
static inline int
static int
omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq)
{
if (irq == IRQ_TX)
......
......@@ -57,7 +57,6 @@
#include <asm/arch/pm.h>
#include <asm/arch/mux.h>
#include <asm/arch/dma.h>
#include <asm/arch/dsp_common.h>
#include <asm/arch/dmtimer.h>
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册