提交 c6295cdf 编写于 作者: 提交者: James Bottomley

[PATCH] scsi: remove meaningless scsi_cmnd->serial_number_at_timeout field

scsi_cmnd->serial_number_at_timeout doesn't serve any purpose
anymore.  All serial_number == serial_number_at_timeout tests
are always true in abort callbacks.  Kill the field.  Also, as
->pid always equals ->serial_number and ->serial_number
doesn't have any special meaning anymore, update comments
above ->serial_number accordingly.  Once we remove all uses of
this field from all lldd's, this field should go.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 d3a933dc
......@@ -2957,13 +2957,6 @@ static int BusLogic_AbortCommand(struct scsi_cmnd *Command)
int TargetID = Command->device->id;
struct BusLogic_CCB *CCB;
BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsRequested);
/*
If this Command has already completed, then no Abort is necessary.
*/
if (Command->serial_number != Command->serial_number_at_timeout) {
BusLogic_Warning("Unable to Abort Command to Target %d - " "Already Completed\n", HostAdapter, TargetID);
return SUCCESS;
}
/*
Attempt to find an Active CCB for this Command. If no Active CCB for this
Command is found, then no Abort is necessary.
......
......@@ -9198,9 +9198,8 @@ asc_prt_scsi_cmnd(struct scsi_cmnd *s)
s->use_sg, s->sglist_len, s->abort_reason);
printk(
" serial_number 0x%x, serial_number_at_timeout 0x%x, retries %d, allowed %d\n",
(unsigned) s->serial_number, (unsigned) s->serial_number_at_timeout,
s->retries, s->allowed);
" serial_number 0x%x, retries %d, allowed %d\n",
(unsigned) s->serial_number, s->retries, s->allowed);
printk(
" timeout_per_command %d, timeout_total %d, timeout %d\n",
......
......@@ -833,13 +833,6 @@ ips_eh_abort(Scsi_Cmnd * SC)
if (!ha->active)
return (FAILED);
if (SC->serial_number != SC->serial_number_at_timeout) {
/* HMM, looks like a bogus command */
DEBUG(1, "Abort called with bogus scsi command");
return (FAILED);
}
/* See if the command is on the copp queue */
item = ha->copp_waitlist.head;
while ((item) && (item->scsi_cmd != SC))
......
......@@ -7486,24 +7486,14 @@ static int ncr53c8xx_abort(struct scsi_cmnd *cmd)
struct scsi_cmnd *done_list;
#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
printk("ncr53c8xx_abort: pid=%lu serial_number=%ld serial_number_at_timeout=%ld\n",
cmd->pid, cmd->serial_number, cmd->serial_number_at_timeout);
printk("ncr53c8xx_abort: pid=%lu serial_number=%ld\n",
cmd->pid, cmd->serial_number);
#else
printk("ncr53c8xx_abort: command pid %lu\n", cmd->pid);
#endif
NCR_LOCK_NCB(np, flags);
#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
/*
* We have to just ignore abort requests in some situations.
*/
if (cmd->serial_number != cmd->serial_number_at_timeout) {
sts = SCSI_ABORT_NOT_RUNNING;
goto out;
}
#endif
sts = ncr_abort_command(np, cmd);
out:
done_list = np->done_list;
......
......@@ -1050,10 +1050,8 @@ qla2x00_print_scsi_cmd(struct scsi_cmnd * cmd)
for (i = 0; i < cmd->cmd_len; i++) {
printk("0x%02x ", cmd->cmnd[i]);
}
printk("\n seg_cnt=%d, allowed=%d, retries=%d, "
"serial_number_at_timeout=0x%lx\n",
cmd->use_sg, cmd->allowed, cmd->retries,
cmd->serial_number_at_timeout);
printk("\n seg_cnt=%d, allowed=%d, retries=%d\n",
cmd->use_sg, cmd->allowed, cmd->retries);
printk(" request buffer=0x%p, request buffer len=0x%x\n",
cmd->request_buffer, cmd->request_bufflen);
printk(" tag=%d, transfersize=0x%x\n",
......
......@@ -686,7 +686,6 @@ void scsi_init_cmd_from_req(struct scsi_cmnd *cmd, struct scsi_request *sreq)
cmd->request = sreq->sr_request;
memcpy(cmd->data_cmnd, sreq->sr_cmnd, sizeof(cmd->data_cmnd));
cmd->serial_number = 0;
cmd->serial_number_at_timeout = 0;
cmd->bufflen = sreq->sr_bufflen;
cmd->buffer = sreq->sr_buffer;
cmd->retries = 0;
......@@ -765,7 +764,6 @@ void __scsi_done(struct scsi_cmnd *cmd)
* Set the serial numbers back to zero
*/
cmd->serial_number = 0;
cmd->serial_number_at_timeout = 0;
cmd->state = SCSI_STATE_BHQUEUE;
cmd->owner = SCSI_OWNER_BH_HANDLER;
......
......@@ -79,11 +79,6 @@ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag)
*/
scmd->owner = SCSI_OWNER_ERROR_HANDLER;
scmd->state = SCSI_STATE_FAILED;
/*
* Set the serial_number_at_timeout to the current
* serial_number
*/
scmd->serial_number_at_timeout = scmd->serial_number;
list_add_tail(&scmd->eh_entry, &shost->eh_cmd_q);
set_bit(SHOST_RECOVERY, &shost->shost_state);
shost->host_failed++;
......@@ -1061,7 +1056,6 @@ static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n",
__FUNCTION__));
scmd->owner = SCSI_OWNER_LOWLEVEL;
scmd->serial_number_at_timeout = scmd->serial_number;
if (!scmd->device->host->hostt->eh_bus_reset_handler)
return FAILED;
......@@ -1093,7 +1087,6 @@ static int scsi_try_host_reset(struct scsi_cmnd *scmd)
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n",
__FUNCTION__));
scmd->owner = SCSI_OWNER_LOWLEVEL;
scmd->serial_number_at_timeout = scmd->serial_number;
if (!scmd->device->host->hostt->eh_host_reset_handler)
return FAILED;
......
......@@ -298,7 +298,6 @@ static int scsi_init_cmd_errh(struct scsi_cmnd *cmd)
{
cmd->owner = SCSI_OWNER_MIDLEVEL;
cmd->serial_number = 0;
cmd->serial_number_at_timeout = 0;
cmd->abort_reason = 0;
memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer);
......
......@@ -799,12 +799,6 @@ static int sym_eh_handler(int op, char *opname, struct scsi_cmnd *cmd)
dev_warn(&cmd->device->sdev_gendev, "%s operation started.\n", opname);
#if 0
/* This one should be the result of some race, thus to ignore */
if (cmd->serial_number != cmd->serial_number_at_timeout)
goto prepare;
#endif
/* This one is queued in some place -> to wait for completion */
FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) {
struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq);
......
......@@ -43,21 +43,17 @@ struct scsi_cmnd {
void (*done) (struct scsi_cmnd *); /* Mid-level done function */
/*
* A SCSI Command is assigned a nonzero serial_number when internal_cmnd
* passes it to the driver's queue command function. The serial_number
* is cleared when scsi_done is entered indicating that the command has
* been completed. If a timeout occurs, the serial number at the moment
* of timeout is copied into serial_number_at_timeout. By subsequently
* comparing the serial_number and serial_number_at_timeout fields
* during abort or reset processing, we can detect whether the command
* has already completed. This also detects cases where the command has
* completed and the SCSI Command structure has already being reused
* for another command, so that we can avoid incorrectly aborting or
* resetting the new command.
* The serial number is only unique per host.
* A SCSI Command is assigned a nonzero serial_number before passed
* to the driver's queue command function. The serial_number is
* cleared when scsi_done is entered indicating that the command
* has been completed. It currently doesn't have much use other
* than printk's. Some lldd's use this number for other purposes.
* It's almost certain that such usages are either incorrect or
* meaningless. Please kill all usages other than printk's. Also,
* as this number is always identical to ->pid, please convert
* printk's to use ->pid, so that we can kill this field.
*/
unsigned long serial_number;
unsigned long serial_number_at_timeout;
int retries;
int allowed;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册