Merge branch 'imx/imx6q' into next/soc

Conflicts:
	Documentation/devicetree/bindings/arm/fsl.txt
	arch/arm/Kconfig
	arch/arm/Kconfig.debug
	arch/arm/plat-mxc/include/mach/common.h

Documentation/devicetree/bindings/arm/fsl.txt

+Freescale i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
 i.MX51 Babbage Board
 Required root node properties:
     - compatible = "fsl,imx51-babbage", "fsl,imx51";
@@ -17,3 +20,7 @@ Required root node properties:
 i.MX53 Smart Mobile Reference Design Board
 Required root node properties:
     - compatible = "fsl,imx53-smd", "fsl,imx53";
+
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+    - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";

MAINTAINERS

@@ -793,6 +793,13 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-mx5/
 
+ARM/FREESCALE IMX6
+M:	Shawn Guo <shawn.guo@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
+F:	arch/arm/mach-imx/*imx6*
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm/Kconfig

@@ -1435,7 +1435,7 @@ config SMP
 	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
 		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
 		 ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
-		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK
+		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
 	select USE_GENERIC_SMP_HELPERS
 	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
 	help

arch/arm/Kconfig.debug

@@ -135,6 +135,118 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the UART on Highbank based devices.
 
+	config DEBUG_IMX1_UART
+		bool "i.MX1 Debug UART"
+		depends on SOC_IMX1
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX1.
+
+	config DEBUG_IMX23_UART
+		bool "i.MX23 Debug UART"
+		depends on SOC_IMX23
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX23.
+
+	config DEBUG_IMX25_UART
+		bool "i.MX25 Debug UART"
+		depends on SOC_IMX25
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX25.
+
+	config DEBUG_IMX21_IMX27_UART
+		bool "i.MX21 and i.MX27 Debug UART"
+		depends on SOC_IMX21 || SOC_IMX27
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX21 or i.MX27.
+
+	config DEBUG_IMX28_UART
+		bool "i.MX28 Debug UART"
+		depends on SOC_IMX28
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX28.
+
+	config DEBUG_IMX31_IMX35_UART
+		bool "i.MX31 and i.MX35 Debug UART"
+		depends on SOC_IMX31 || SOC_IMX35
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX31 or i.MX35.
+
+	config DEBUG_IMX51_UART
+		bool "i.MX51 Debug UART"
+		depends on SOC_IMX51
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX51.
+
+	config DEBUG_IMX50_IMX53_UART
+		bool "i.MX50 and i.MX53 Debug UART"
+		depends on SOC_IMX50 || SOC_IMX53
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX50 or i.MX53.
+
+	config DEBUG_IMX6Q_UART
+		bool "i.MX6Q Debug UART"
+		depends on SOC_IMX6Q
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6Q.
+
+	config DEBUG_S3C_UART0
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 0 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART1
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 1 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART2
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 2 for low-level debug"
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
+
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_REALVIEW_STD_PORT
+		bool "RealView Default UART"
+		depends on ARCH_REALVIEW
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on RealView EB, PB11MP, PBA8
+		  and PBX platforms.
+
+	config DEBUG_REALVIEW_PB1176_PORT
+		bool "RealView PB1176 UART"
+		depends on MACH_REALVIEW_PB1176
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the standard serial port on the RealView
+		  PB1176 platform.
+
 endchoice
 
 config EARLY_PRINTK
@@ -153,18 +265,6 @@ config OC_ETM
 	  buffer driver that will allow you to collect traces of the
 	  kernel code.
 
-config DEBUG_S3C_UART
-	depends on PLAT_SAMSUNG
-	int "S3C UART to use for low-level debug"
-	default "0"
-	help
-	  Choice for UART for kernel low-level using S3C UARTS,
-	  should be between zero and two. The port must have been
-	  initialised by the boot-loader before use.
-
-	  The uncompressor code port configuration is now handled
-	  by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
 config ARM_KPROBES_TEST
 	tristate "Kprobes test module"
 	depends on KPROBES && MODULES

arch/arm/Makefile

@@ -159,7 +159,7 @@ machine-$(CONFIG_ARCH_MMP)		:= mmp
 machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
-machine-$(CONFIG_ARCH_MX3)		:= imx
+machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
 machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx

arch/arm/boot/dts/imx6q-sabreauto.dts

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+	chosen {
+		bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
+	};
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	soc {
+		aips-bus@02100000 { /* AIPS2 */
+			enet@02188000 {
+				phy-mode = "rgmii";
+				local-mac-address = [00 04 9F 01 1B 61];
+				status = "okay";
+			};
+
+			usdhc@02198000 { /* uSDHC3 */
+				cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
+				wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
+				status = "okay";
+			};
+
+			usdhc@0219c000 { /* uSDHC4 */
+				fsl,card-wired;
+				status = "okay";
+			};
+
+			uart3: uart@021f0000 { /* UART4 */
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		debug-led {
+			label = "Heartbeat";
+			gpios = <&gpio2 25 0>; /* GPIO3_25 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};

arch/arm/boot/dts/imx6q.dtsi

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		timer@00a00600 {
+			compatible = "arm,smp-twd";
+			reg = <0x00a00600 0x100>;
+			interrupts = <1 13 0xf4>;
+		};
+
+		L2: l2-cache@00a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <0 92 0x04>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		aips-bus@02000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif@02004000 {
+					reg = <0x02004000 0x4000>;
+					interrupts = <0 52 0x04>;
+				};
+
+				ecspi@02008000 { /* eCSPI1 */
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <0 31 0x04>;
+					status = "disabled";
+				};
+
+				ecspi@0200c000 { /* eCSPI2 */
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <0 32 0x04>;
+					status = "disabled";
+				};
+
+				ecspi@02010000 { /* eCSPI3 */
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <0 33 0x04>;
+					status = "disabled";
+				};
+
+				ecspi@02014000 { /* eCSPI4 */
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <0 34 0x04>;
+					status = "disabled";
+				};
+
+				ecspi@02018000 { /* eCSPI5 */
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02018000 0x4000>;
+					interrupts = <0 35 0x04>;
+					status = "disabled";
+				};
+
+				uart0: uart@02020000 { /* UART1 */
+					compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <0 26 0x04>;
+					status = "disabled";
+				};
+
+				esai@02024000 {
+					reg = <0x02024000 0x4000>;
+					interrupts = <0 51 0x04>;
+				};
+
+				ssi@02028000 { /* SSI1 */
+					reg = <0x02028000 0x4000>;
+					interrupts = <0 46 0x04>;
+				};
+
+				ssi@0202c000 { /* SSI2 */
+					reg = <0x0202c000 0x4000>;
+					interrupts = <0 47 0x04>;
+				};
+
+				ssi@02030000 { /* SSI3 */
+					reg = <0x02030000 0x4000>;
+					interrupts = <0 48 0x04>;
+				};
+
+				asrc@02034000 {
+					reg = <0x02034000 0x4000>;
+					interrupts = <0 50 0x04>;
+				};
+
+				spba@0203c000 {
+					reg = <0x0203c000 0x4000>;
+				};
+			};
+
+			vpu@02040000 {
+				reg = <0x02040000 0x3c000>;
+				interrupts = <0 3 0x04 0 12 0x04>;
+			};
+
+			aipstz@0207c000 { /* AIPSTZ1 */
+				reg = <0x0207c000 0x4000>;
+			};
+
+			pwm@02080000 { /* PWM1 */
+				reg = <0x02080000 0x4000>;
+				interrupts = <0 83 0x04>;
+			};
+
+			pwm@02084000 { /* PWM2 */
+				reg = <0x02084000 0x4000>;
+				interrupts = <0 84 0x04>;
+			};
+
+			pwm@02088000 { /* PWM3 */
+				reg = <0x02088000 0x4000>;
+				interrupts = <0 85 0x04>;
+			};
+
+			pwm@0208c000 { /* PWM4 */
+				reg = <0x0208c000 0x4000>;
+				interrupts = <0 86 0x04>;
+			};
+
+			flexcan@02090000 { /* CAN1 */
+				reg = <0x02090000 0x4000>;
+				interrupts = <0 110 0x04>;
+			};
+
+			flexcan@02094000 { /* CAN2 */
+				reg = <0x02094000 0x4000>;
+				interrupts = <0 111 0x04>;
+			};
+
+			gpt@02098000 {
+				compatible = "fsl,imx6q-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <0 55 0x04>;
+			};
+
+			gpio0: gpio@0209c000 { /* GPIO1 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <0 66 0x04 0 67 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio1: gpio@020a0000 { /* GPIO2 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <0 68 0x04 0 69 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio2: gpio@020a4000 { /* GPIO3 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <0 70 0x04 0 71 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio3: gpio@020a8000 { /* GPIO4 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <0 72 0x04 0 73 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio4: gpio@020ac000 { /* GPIO5 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <0 74 0x04 0 75 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio5: gpio@020b0000 { /* GPIO6 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <0 76 0x04 0 77 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			gpio6: gpio@020b4000 { /* GPIO7 */
+				compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <0 78 0x04 0 79 0x04>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			kpp@020b8000 {
+				reg = <0x020b8000 0x4000>;
+				interrupts = <0 82 0x04>;
+			};
+
+			wdog@020bc000 { /* WDOG1 */
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <0 80 0x04>;
+				status = "disabled";
+			};
+
+			wdog@020c0000 { /* WDOG2 */
+				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <0 81 0x04>;
+				status = "disabled";
+			};
+
+			ccm@020c4000 {
+				compatible = "fsl,imx6q-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <0 87 0x04 0 88 0x04>;
+			};
+
+			anatop@020c8000 {
+				compatible = "fsl,imx6q-anatop";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+			};
+
+			usbphy@020c9000 { /* USBPHY1 */
+				reg = <0x020c9000 0x1000>;
+				interrupts = <0 44 0x04>;
+			};
+
+			usbphy@020ca000 { /* USBPHY2 */
+				reg = <0x020ca000 0x1000>;
+				interrupts = <0 45 0x04>;
+			};
+
+			snvs@020cc000 {
+				reg = <0x020cc000 0x4000>;
+				interrupts = <0 19 0x04 0 20 0x04>;
+			};
+
+			epit@020d0000 { /* EPIT1 */
+				reg = <0x020d0000 0x4000>;
+				interrupts = <0 56 0x04>;
+			};
+
+			epit@020d4000 { /* EPIT2 */
+				reg = <0x020d4000 0x4000>;
+				interrupts = <0 57 0x04>;
+			};
+
+			src@020d8000 {
+				compatible = "fsl,imx6q-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <0 91 0x04 0 96 0x04>;
+			};
+
+			gpc@020dc000 {
+				compatible = "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupts = <0 89 0x04 0 90 0x04>;
+			};
+
+			iomuxc@020e0000 {
+				reg = <0x020e0000 0x4000>;
+			};
+
+			dcic@020e4000 { /* DCIC1 */
+				reg = <0x020e4000 0x4000>;
+				interrupts = <0 124 0x04>;
+			};
+
+			dcic@020e8000 { /* DCIC2 */
+				reg = <0x020e8000 0x4000>;
+				interrupts = <0 125 0x04>;
+			};
+
+			sdma@020ec000 {
+				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <0 2 0x04>;
+			};
+		};
+
+		aips-bus@02100000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			caam@02100000 {
+				reg = <0x02100000 0x40000>;
+				interrupts = <0 105 0x04 0 106 0x04>;
+			};
+
+			aipstz@0217c000 { /* AIPSTZ2 */
+				reg = <0x0217c000 0x4000>;
+			};
+
+			enet@02188000 {
+				compatible = "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <0 118 0x04 0 119 0x04>;
+				status = "disabled";
+			};
+
+			mlb@0218c000 {
+				reg = <0x0218c000 0x4000>;
+				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+			};
+
+			usdhc@02190000 { /* uSDHC1 */
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <0 22 0x04>;
+				status = "disabled";
+			};
+
+			usdhc@02194000 { /* uSDHC2 */
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <0 23 0x04>;
+				status = "disabled";
+			};
+
+			usdhc@02198000 { /* uSDHC3 */
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <0 24 0x04>;
+				status = "disabled";
+			};
+
+			usdhc@0219c000 { /* uSDHC4 */
+				compatible = "fsl,imx6q-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <0 25 0x04>;
+				status = "disabled";
+			};
+
+			i2c@021a0000 { /* I2C1 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <0 36 0x04>;
+				status = "disabled";
+			};
+
+			i2c@021a4000 { /* I2C2 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <0 37 0x04>;
+				status = "disabled";
+			};
+
+			i2c@021a8000 { /* I2C3 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <0 38 0x04>;
+				status = "disabled";
+			};
+
+			romcp@021ac000 {
+				reg = <0x021ac000 0x4000>;
+			};
+
+			mmdc@021b0000 { /* MMDC0 */
+				compatible = "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			mmdc@021b4000 { /* MMDC1 */
+				reg = <0x021b4000 0x4000>;
+			};
+
+			weim@021b8000 {
+				reg = <0x021b8000 0x4000>;
+				interrupts = <0 14 0x04>;
+			};
+
+			ocotp@021bc000 {
+				reg = <0x021bc000 0x4000>;
+			};
+
+			ocotp@021c0000 {
+				reg = <0x021c0000 0x4000>;
+				interrupts = <0 21 0x04>;
+			};
+
+			tzasc@021d0000 { /* TZASC1 */
+				reg = <0x021d0000 0x4000>;
+				interrupts = <0 108 0x04>;
+			};
+
+			tzasc@021d4000 { /* TZASC2 */
+				reg = <0x021d4000 0x4000>;
+				interrupts = <0 109 0x04>;
+			};
+
+			audmux@021d8000 {
+				reg = <0x021d8000 0x4000>;
+			};
+
+			mipi@021dc000 { /* MIPI-CSI */
+				reg = <0x021dc000 0x4000>;
+			};
+
+			mipi@021e0000 { /* MIPI-DSI */
+				reg = <0x021e0000 0x4000>;
+			};
+
+			vdoa@021e4000 {
+				reg = <0x021e4000 0x4000>;
+				interrupts = <0 18 0x04>;
+			};
+
+			uart1: uart@021e8000 { /* UART2 */
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <0 27 0x04>;
+				status = "disabled";
+			};
+
+			uart2: uart@021ec000 { /* UART3 */
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <0 28 0x04>;
+				status = "disabled";
+			};
+
+			uart3: uart@021f0000 { /* UART4 */
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <0 29 0x04>;
+				status = "disabled";
+			};
+
+			uart4: uart@021f4000 { /* UART5 */
+				compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <0 30 0x04>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/mach-imx/Kconfig

 config IMX_HAVE_DMA_V1
 	bool
+
+config HAVE_IMX_GPC
+	bool
+
+config HAVE_IMX_MMDC
+	bool
+
+config HAVE_IMX_SRC
+	bool
+
 #
 # ARCH_MX31 and ARCH_MX35 are left for compatibility
 # Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
@@ -64,6 +74,7 @@ config SOC_IMX31
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_MX31
 	select MXC_AVIC
+	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
@@ -73,6 +84,7 @@ config SOC_IMX35
 	select HAVE_EPIT
 	select ARCH_MX35
 	select MXC_AVIC
+	select SMP_ON_UP if SMP
 
 
 if ARCH_IMX_V4_V5
@@ -341,7 +353,7 @@ config MACH_IMX27IPCAM
 
 endif
 
-if ARCH_MX3
+if ARCH_IMX_V6_V7
 
 comment "MX31 platforms:"
 
@@ -591,4 +603,20 @@ config MACH_VPR200
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
 
+comment "i.MX6 family:"
+
+config SOC_IMX6Q
+	bool "i.MX6 Quad support"
+	select ARM_GIC
+	select CACHE_L2X0
+	select CPU_V7
+	select HAVE_ARM_SCU
+	select HAVE_IMX_GPC
+	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
+	select USE_OF
+
+	help
+	  This enables support for Freescale i.MX6 Quad processor.
+
 endif

arch/arm/mach-imx/Makefile

@@ -60,3 +60,14 @@ obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+
+obj-$(CONFIG_DEBUG_LL) += lluart.o
+obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
+obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
+obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+obj-$(CONFIG_CPU_V7) += head-v7.o
+AFLAGS_head-v7.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o

arch/arm/mach-imx/Makefile.boot

@@ -17,3 +17,7 @@ initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
 zreladdr-$(CONFIG_ARCH_MX3)	:= 0x80008000
 params_phys-$(CONFIG_ARCH_MX3)	:= 0x80000100
 initrd_phys-$(CONFIG_ARCH_MX3)	:= 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
+params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
+initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000

arch/arm/mach-imx/gpc.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/gic.h>
+
+#define GPC_IMR1		0x008
+#define GPC_PGC_CPU_PDN		0x2a0
+
+#define IMR_NUM			4
+
+static void __iomem *gpc_base;
+static u32 gpc_wake_irqs[IMR_NUM];
+static u32 gpc_saved_imrs[IMR_NUM];
+
+void imx_gpc_pre_suspend(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	/* Tell GPC to power off ARM core when suspend */
+	writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+
+	for (i = 0; i < IMR_NUM; i++) {
+		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+		writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
+	}
+}
+
+void imx_gpc_post_resume(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	/* Keep ARM core powered on for other low-power modes */
+	writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
+
+	for (i = 0; i < IMR_NUM; i++)
+		writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
+static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	unsigned int idx = d->irq / 32 - 1;
+	u32 mask;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return -EINVAL;
+
+	mask = 1 << d->irq % 32;
+	gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
+				  gpc_wake_irqs[idx] & ~mask;
+
+	return 0;
+}
+
+static void imx_gpc_irq_unmask(struct irq_data *d)
+{
+	void __iomem *reg;
+	u32 val;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return;
+
+	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+	val = readl_relaxed(reg);
+	val &= ~(1 << d->irq % 32);
+	writel_relaxed(val, reg);
+}
+
+static void imx_gpc_irq_mask(struct irq_data *d)
+{
+	void __iomem *reg;
+	u32 val;
+
+	/* Sanity check for SPI irq */
+	if (d->irq < 32)
+		return;
+
+	reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+	val = readl_relaxed(reg);
+	val |= 1 << (d->irq % 32);
+	writel_relaxed(val, reg);
+}
+
+void __init imx_gpc_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+	gpc_base = of_iomap(np, 0);
+	WARN_ON(!gpc_base);
+
+	/* Register GPC as the secondary interrupt controller behind GIC */
+	gic_arch_extn.irq_mask = imx_gpc_irq_mask;
+	gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
+	gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+}

arch/arm/mach-imx/head-v7.S

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+	.section ".text.head", "ax"
+	__CPUINIT
+
+/*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor.  We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures.  Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+	mov	r0, #0
+	mcr	p15, 2, r0, c0, c0, 0
+	mrc	p15, 1, r0, c0, c0, 0
+
+	ldr	r1, =0x7fff
+	and	r2, r1, r0, lsr #13
+
+	ldr	r1, =0x3ff
+
+	and	r3, r1, r0, lsr #3	@ NumWays - 1
+	add	r2, r2, #1		@ NumSets
+
+	and	r0, r0, #0x7
+	add	r0, r0, #4	@ SetShift
+
+	clz	r1, r3		@ WayShift
+	add	r4, r3, #1	@ NumWays
+1:	sub	r2, r2, #1	@ NumSets--
+	mov	r3, r4		@ Temp = NumWays
+2:	subs	r3, r3, #1	@ Temp--
+	mov	r5, r3, lsl r1
+	mov	r6, r2, lsl r0
+	orr	r5, r5, r6	@ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	mcr	p15, 0, r5, c7, c6, 2
+	bgt	2b
+	cmp	r2, #0
+	bgt	1b
+	dsb
+	isb
+	mov	pc, lr
+ENDPROC(v7_invalidate_l1)
+
+#ifdef CONFIG_SMP
+ENTRY(v7_secondary_startup)
+	bl	v7_invalidate_l1
+	b	secondary_startup
+ENDPROC(v7_secondary_startup)
+#endif
+
+/*
+ * The following code is located into the .data section.  This is to
+ * allow phys_l2x0_saved_regs to be accessed with a relative load
+ * as we are running on physical address here.
+ */
+	.data
+	.align
+
+	.macro	pl310_resume
+	ldr	r2, phys_l2x0_saved_regs
+	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
+	ldr	r1, [r2, #L2X0_R_AUX_CTRL]	@ get aux_ctrl value
+	str	r1, [r0, #L2X0_AUX_CTRL]	@ restore aux_ctrl
+	mov	r1, #0x1
+	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
+	.endm
+
+ENTRY(v7_cpu_resume)
+	bl	v7_invalidate_l1
+	pl310_resume
+	b	cpu_resume
+ENDPROC(v7_cpu_resume)
+
+	.globl	phys_l2x0_saved_regs
+phys_l2x0_saved_regs:
+        .long   0

arch/arm/mach-imx/hotplug.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/errno.h>
+#include <asm/cacheflush.h>
+#include <mach/common.h>
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+	flush_cache_all();
+	imx_enable_cpu(cpu, false);
+	cpu_do_idle();
+
+	/* We should never return from idle */
+	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}

arch/arm/mach-imx/lluart.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+static struct map_desc imx_lluart_desc = {
+#ifdef CONFIG_DEBUG_IMX6Q_UART
+	.virtual	= MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
+	.pfn		= __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
+	.length		= MX6Q_UART4_SIZE,
+	.type		= MT_DEVICE,
+#endif
+};
+
+void __init imx_lluart_map_io(void)
+{
+	if (imx_lluart_desc.virtual)
+		iotable_init(&imx_lluart_desc, 1);
+}

arch/arm/mach-imx/localtimer.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+	if (!twd_base) {
+		twd_base = of_iomap(np, 0);
+		WARN_ON(!twd_base);
+	}
+	evt->irq = irq_of_parse_and_map(np, 0);
+	twd_timer_setup(evt);
+
+	return 0;
+}

arch/arm/mach-imx/mach-imx6q.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __init imx6q_init_machine(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+	imx6q_pm_init();
+}
+
+static void __init imx6q_map_io(void)
+{
+	imx_lluart_map_io();
+	imx_scu_map_io();
+}
+
+static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+				struct device_node *interrupt_parent)
+{
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+				   32 * 7; /* imx6q gets 7 gpio ports */
+
+	irq_domain_add_simple(np, gpio_irq_base);
+	gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx6q_irq_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
+	{ /* sentinel */ }
+};
+
+static void __init imx6q_init_irq(void)
+{
+	l2x0_of_init(0, ~0UL);
+	imx_src_init();
+	imx_gpc_init();
+	of_irq_init(imx6q_irq_match);
+}
+
+static void __init imx6q_timer_init(void)
+{
+	mx6q_clocks_init();
+}
+
+static struct sys_timer imx6q_timer = {
+	.init = imx6q_timer_init,
+};
+
+static const char *imx6q_dt_compat[] __initdata = {
+	"fsl,imx6q-sabreauto",
+	NULL,
+};
+
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+	.map_io		= imx6q_map_io,
+	.init_irq	= imx6q_init_irq,
+	.handle_irq	= imx6q_handle_irq,
+	.timer		= &imx6q_timer,
+	.init_machine	= imx6q_init_machine,
+	.dt_compat	= imx6q_dt_compat,
+MACHINE_END

arch/arm/mach-imx/mmdc.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+
+#define MMDC_MAPSR		0x404
+#define BP_MMDC_MAPSR_PSD	0
+#define BP_MMDC_MAPSR_PSS	4
+
+static int __devinit imx_mmdc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	void __iomem *mmdc_base, *reg;
+	u32 val;
+	int timeout = 0x400;
+
+	mmdc_base = of_iomap(np, 0);
+	WARN_ON(!mmdc_base);
+
+	reg = mmdc_base + MMDC_MAPSR;
+
+	/* Enable automatic power saving */
+	val = readl_relaxed(reg);
+	val &= ~(1 << BP_MMDC_MAPSR_PSD);
+	writel_relaxed(val, reg);
+
+	/* Ensure it's successfully enabled */
+	while (!(readl_relaxed(reg) & 1 << BP_MMDC_MAPSR_PSS) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout)) {
+		pr_warn("%s: failed to enable automatic power saving\n",
+			__func__);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static struct of_device_id imx_mmdc_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-mmdc", },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver imx_mmdc_driver = {
+	.driver		= {
+		.name	= "imx-mmdc",
+		.owner	= THIS_MODULE,
+		.of_match_table = imx_mmdc_dt_ids,
+	},
+	.probe		= imx_mmdc_probe,
+};
+
+static int __init imx_mmdc_init(void)
+{
+	return platform_driver_register(&imx_mmdc_driver);
+}
+postcore_initcall(imx_mmdc_init);

arch/arm/mach-imx/platsmp.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/page.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __iomem *scu_base;
+
+static struct map_desc scu_io_desc __initdata = {
+	/* .virtual and .pfn are run-time assigned */
+	.length		= SZ_4K,
+	.type		= MT_DEVICE,
+};
+
+void __init imx_scu_map_io(void)
+{
+	unsigned long base;
+
+	/* Get SCU base */
+	asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+	scu_io_desc.virtual = IMX_IO_P2V(base);
+	scu_io_desc.pfn = __phys_to_pfn(base);
+	iotable_init(&scu_io_desc, 1);
+
+	scu_base = IMX_IO_ADDRESS(base);
+}
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_secondary_init(0);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	imx_set_cpu_jump(cpu, v7_secondary_startup);
+	imx_enable_cpu(cpu, true);
+	return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	int i, ncores;
+
+	ncores = scu_get_core_count(scu_base);
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	set_smp_cross_call(gic_raise_softirq);
+}
+
+void imx_smp_prepare(void)
+{
+	scu_enable(scu_base);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+	imx_smp_prepare();
+}

arch/arm/mach-imx/pm-imx6q.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+extern unsigned long phys_l2x0_saved_regs;
+
+static int imx6q_suspend_finish(unsigned long val)
+{
+	cpu_do_idle();
+	return 0;
+}
+
+static int imx6q_pm_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		imx6q_set_lpm(STOP_POWER_OFF);
+		imx_gpc_pre_suspend();
+		imx_set_cpu_jump(0, v7_cpu_resume);
+		/* Zzz ... */
+		cpu_suspend(0, imx6q_suspend_finish);
+		imx_smp_prepare();
+		imx_gpc_post_resume();
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct platform_suspend_ops imx6q_pm_ops = {
+	.enter = imx6q_pm_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+void __init imx6q_pm_init(void)
+{
+	/*
+	 * The l2x0 core code provides an infrastucture to save and restore
+	 * l2x0 registers across suspend/resume cycle.  But because imx6q
+	 * retains L2 content during suspend and needs to resume L2 before
+	 * MMU is enabled, it can only utilize register saving support and
+	 * have to take care of restoring on its own.  So we save physical
+	 * address of the data structure used by l2x0 core to save registers,
+	 * and later restore the necessary ones in imx6q resume entry.
+	 */
+	phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
+
+	suspend_set_ops(&imx6q_pm_ops);
+}

arch/arm/mach-imx/src.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/unified.h>
+
+#define SRC_SCR				0x000
+#define SRC_GPR1			0x020
+#define BP_SRC_SCR_CORE1_RST		14
+#define BP_SRC_SCR_CORE1_ENABLE		22
+
+static void __iomem *src_base;
+
+void imx_enable_cpu(int cpu, bool enable)
+{
+	u32 mask, val;
+
+	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+	val = readl_relaxed(src_base + SRC_SCR);
+	val = enable ? val | mask : val & ~mask;
+	writel_relaxed(val, src_base + SRC_SCR);
+}
+
+void imx_set_cpu_jump(int cpu, void *jump_addr)
+{
+	writel_relaxed(BSYM(virt_to_phys(jump_addr)),
+		       src_base + SRC_GPR1 + cpu * 8);
+}
+
+void __init imx_src_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
+	src_base = of_iomap(np, 0);
+	WARN_ON(!src_base);
+}

arch/arm/mach-mxs/include/mach/debug-macro.S

@@ -14,17 +14,9 @@
 #include <mach/mx23.h>
 #include <mach/mx28.h>
 
-#ifdef CONFIG_SOC_IMX23
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#ifdef CONFIG_DEBUG_IMX23_UART
 #define UART_PADDR	MX23_DUART_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX28_UART)
 #define UART_PADDR	MX28_DUART_BASE_ADDR
 #endif
 

arch/arm/mach-realview/include/mach/debug-macro.S

@@ -10,23 +10,10 @@
  * published by the Free Software Foundation.
  */
 
-#if defined(CONFIG_MACH_REALVIEW_EB) || \
-    defined(CONFIG_MACH_REALVIEW_PB11MP) || \
-    defined(CONFIG_MACH_REALVIEW_PBA8) || \
-    defined(CONFIG_MACH_REALVIEW_PBX)
-#ifndef DEBUG_LL_UART_OFFSET
+#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT
 #define DEBUG_LL_UART_OFFSET	0x00009000
-#elif DEBUG_LL_UART_OFFSET != 0x00009000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
-#endif
-
-#ifdef CONFIG_MACH_REALVIEW_PB1176
-#ifndef DEBUG_LL_UART_OFFSET
+#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT)
 #define DEBUG_LL_UART_OFFSET	0x0010c000
-#elif DEBUG_LL_UART_OFFSET != 0x0010c000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
 #endif
 
 #ifndef DEBUG_LL_UART_OFFSET

arch/arm/mm/Kconfig

@@ -819,7 +819,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
+		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
 		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
 		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
 		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK

arch/arm/plat-mxc/Kconfig

@@ -6,7 +6,7 @@ menu "Freescale MXC Implementations"
 
 choice
 	prompt "Freescale CPU family:"
-	default ARCH_MX3
+	default ARCH_IMX_V6_V7
 
 config ARCH_IMX_V4_V5
 	bool "i.MX1, i.MX21, i.MX25, i.MX27"
@@ -16,10 +16,13 @@ config ARCH_IMX_V4_V5
 	  This enables support for systems based on the Freescale i.MX ARMv4
 	  and ARMv5 SoCs
 
-config ARCH_MX3
-	bool "MX3-based"
+config ARCH_IMX_V6_V7
+	bool "i.MX3, i.MX6"
+	select AUTO_ZRELADDR if !ZBOOT_ROM
+	select ARM_PATCH_PHYS_VIRT
 	help
-	  This enables support for systems based on the Freescale i.MX3 family
+	  This enables support for systems based on the Freescale i.MX3 and i.MX6
+	  family.
 
 config ARCH_MX5
 	bool "i.MX50, i.MX51, i.MX53"

arch/arm/plat-mxc/Makefile

@@ -5,7 +5,7 @@
 # Common support
 obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
 
-# MX51 uses the TZIC interrupt controller, older platforms use AVIC
+obj-$(CONFIG_ARM_GIC) += gic.o
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
 

arch/arm/plat-mxc/gic.c

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <asm/exception.h>
+#include <asm/localtimer.h>
+#include <asm/hardware/gic.h>
+#ifdef CONFIG_SMP
+#include <asm/smp.h>
+#endif
+
+asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+	u32 irqstat, irqnr;
+
+	do {
+		irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK);
+		irqnr = irqstat & 0x3ff;
+		if (irqnr == 1023)
+			break;
+
+		if (irqnr > 29 && irqnr < 1021)
+			handle_IRQ(irqnr, regs);
+#ifdef CONFIG_SMP
+		else if (irqnr < 16) {
+			writel_relaxed(irqstat, gic_cpu_base_addr +
+						GIC_CPU_EOI);
+			handle_IPI(irqnr, regs);
+		}
+#endif
+#ifdef CONFIG_LOCAL_TIMERS
+		else if (irqnr == 29) {
+			writel_relaxed(irqstat, gic_cpu_base_addr +
+						GIC_CPU_EOI);
+			handle_local_timer(regs);
+		}
+#endif
+	} while (1);
+}

arch/arm/plat-mxc/include/mach/common.h

@@ -13,6 +13,7 @@
 
 struct platform_device;
 struct clk;
+enum mxc_cpu_pwr_mode;
 
 extern void mx1_map_io(void);
 extern void mx21_map_io(void);
@@ -66,6 +67,7 @@ extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
 extern int mx51_clocks_init_dt(void);
 extern int mx53_clocks_init_dt(void);
+extern int mx6q_clocks_init(void);
 extern struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
 extern void mxc_set_cpu_type(unsigned int type);
@@ -88,6 +90,7 @@ extern void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
 void tzic_handle_irq(struct pt_regs *);
+void gic_handle_irq(struct pt_regs *);
 
 #define imx1_handle_irq avic_handle_irq
 #define imx21_handle_irq avic_handle_irq
@@ -98,10 +101,36 @@ void tzic_handle_irq(struct pt_regs *);
 #define imx50_handle_irq tzic_handle_irq
 #define imx51_handle_irq tzic_handle_irq
 #define imx53_handle_irq tzic_handle_irq
+#define imx6q_handle_irq gic_handle_irq
 
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+#ifdef CONFIG_DEBUG_LL
+extern void imx_lluart_map_io(void);
+#else
+static inline void imx_lluart_map_io(void) {}
+#endif
+extern void v7_cpu_resume(void);
+extern u32 *pl310_get_save_ptr(void);
+#ifdef CONFIG_SMP
+extern void v7_secondary_startup(void);
+extern void imx_scu_map_io(void);
+extern void imx_smp_prepare(void);
+#else
+static inline void imx_scu_map_io(void) {}
+static inline void imx_smp_prepare(void) {}
+#endif
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern void imx_src_init(void);
+extern void imx_gpc_init(void);
+extern void imx_gpc_pre_suspend(void);
+extern void imx_gpc_post_resume(void);
 extern void imx51_babbage_common_init(void);
 extern void imx53_ard_common_init(void);
 extern void imx53_evk_common_init(void);
 extern void imx53_qsb_common_init(void);
 extern void imx53_smd_common_init(void);
+extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+extern void imx6q_pm_init(void);
 #endif

arch/arm/plat-mxc/include/mach/debug-macro.S

@@ -12,44 +12,20 @@
  */
 #include <mach/hardware.h>
 
-#ifdef CONFIG_SOC_IMX1
+#ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	MX1_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	MX25_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
 #define UART_PADDR	MX2x_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
 #define UART_PADDR	MX3x_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX51_UART)
 #define UART_PADDR	MX51_UART1_BASE_ADDR
-#endif
-
-/* iMX50/53 have same addresses, but not iMX51 */
-#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
 #define UART_PADDR	MX53_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#define UART_PADDR	MX6Q_UART4_BASE_ADDR
 #endif
 
 #define UART_VADDR	IMX_IO_ADDRESS(UART_PADDR)

arch/arm/plat-mxc/include/mach/entry-macro.S

@@ -22,3 +22,9 @@
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 	.endm
+
+	.macro test_for_ipi, irqnr, irqstat, base, tmp
+	.endm
+
+	.macro test_for_ltirq, irqnr, irqstat, base, tmp
+	.endm

arch/arm/plat-mxc/include/mach/hardware.h

@@ -91,6 +91,11 @@
  *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
  *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
  *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
+ * mx6q:
+ *	SCU	0x00a00000+0x001000	->	0xf4000000+0x001000
+ *	CCM	0x020c4000+0x004000	->	0xf42c4000+0x004000
+ *	ANATOP	0x020c8000+0x001000	->	0xf42c8000+0x001000
+ *	UART4	0x021f0000+0x004000	->	0xf42f0000+0x004000
  */
 #define IMX_IO_P2V(x)	(						\
 			0xf4000000 +					\
@@ -102,6 +107,7 @@
 
 #include <mach/mxc.h>
 
+#include <mach/mx6q.h>
 #include <mach/mx50.h>
 #include <mach/mx51.h>
 #include <mach/mx53.h>

arch/arm/plat-mxc/include/mach/irqs.h

@@ -14,9 +14,15 @@
 #include <asm-generic/gpio.h>
 
 /*
- * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
+ * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC
+ * have 128 IRQs, and those with AVIC have 64.
+ *
+ * To support single image, the biggest number should be defined on
+ * top of the list.
  */
-#ifdef CONFIG_MXC_TZIC
+#if defined CONFIG_ARM_GIC
+#define MXC_INTERNAL_IRQS	160
+#elif defined CONFIG_MXC_TZIC
 #define MXC_INTERNAL_IRQS	128
 #else
 #define MXC_INTERNAL_IRQS	64

arch/arm/plat-mxc/include/mach/mx6q.h

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_MX6Q_H__
+#define __MACH_MX6Q_H__
+
+#define MX6Q_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX6Q_IO_ADDRESS(x)		IOMEM(MX6Q_IO_P2V(x))
+
+/*
+ * The following are the blocks that need to be statically mapped.
+ * For other blocks, the base address really should be retrieved from
+ * device tree.
+ */
+#define MX6Q_SCU_BASE_ADDR		0x00a00000
+#define MX6Q_SCU_SIZE			0x1000
+#define MX6Q_CCM_BASE_ADDR		0x020c4000
+#define MX6Q_CCM_SIZE			0x4000
+#define MX6Q_ANATOP_BASE_ADDR		0x020c8000
+#define MX6Q_ANATOP_SIZE		0x1000
+#define MX6Q_UART4_BASE_ADDR		0x021f0000
+#define MX6Q_UART4_SIZE			0x4000
+
+#endif	/* __MACH_MX6Q_H__ */

arch/arm/plat-samsung/Kconfig

@@ -367,4 +367,11 @@ config SAMSUNG_PD
 	help
 	  Say Y here if you want to control Power Domain by Runtime PM.
 
+config DEBUG_S3C_UART
+	depends on PLAT_SAMSUNG
+	int
+	default "0" if DEBUG_S3C_UART0
+	default "1" if DEBUG_S3C_UART1
+	default "2" if DEBUG_S3C_UART2
+
 endif