提交 a3725c45 编写于 作者: A Alexandre Bounine 提交者: Linus Torvalds

rapidio: add support for IDT CPS Gen2 switches

Add the RIO switch driver and definitions for IDT CPS-1848 and CPS-1616
Gen2 devices.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 e274e0ed
......@@ -20,6 +20,13 @@ config RAPIDIO_TSI568
---help---
Includes support for IDT Tsi568 serial RapidIO switch.
config RAPIDIO_CPS_GEN2
bool "IDT CPS Gen.2 SRIO switch support"
depends on RAPIDIO
default n
---help---
Includes support for ITD CPS Gen.2 serial RapidIO switches.
config RAPIDIO_TSI500
bool "Tsi500 Parallel RapidIO switch support"
depends on RAPIDIO
......
......@@ -6,6 +6,7 @@ obj-$(CONFIG_RAPIDIO_TSI57X) += tsi57x.o
obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o
obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o
obj-$(CONFIG_RAPIDIO_TSI500) += tsi500.o
obj-$(CONFIG_RAPIDIO_CPS_GEN2) += idt_gen2.o
ifeq ($(CONFIG_RAPIDIO_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
......
/*
* IDT CPS Gen.2 Serial RapidIO switch family support
*
* Copyright 2010 Integrated Device Technology, Inc.
* Alexandre Bounine <alexandre.bounine@idt.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/rio_ids.h>
#include <linux/delay.h>
#include "../rio.h"
#define LOCAL_RTE_CONF_DESTID_SEL 0x010070
#define LOCAL_RTE_CONF_DESTID_SEL_PSEL 0x0000001f
#define IDT_LT_ERR_REPORT_EN 0x03100c
#define IDT_PORT_ERR_REPORT_EN(n) (0x031044 + (n)*0x40)
#define IDT_PORT_ERR_REPORT_EN_BC 0x03ff04
#define IDT_PORT_ISERR_REPORT_EN(n) (0x03104C + (n)*0x40)
#define IDT_PORT_ISERR_REPORT_EN_BC 0x03ff0c
#define IDT_PORT_INIT_TX_ACQUIRED 0x00000020
#define IDT_LANE_ERR_REPORT_EN(n) (0x038010 + (n)*0x100)
#define IDT_LANE_ERR_REPORT_EN_BC 0x03ff10
#define IDT_DEV_CTRL_1 0xf2000c
#define IDT_DEV_CTRL_1_GENPW 0x02000000
#define IDT_DEV_CTRL_1_PRSTBEH 0x00000001
#define IDT_CFGBLK_ERR_CAPTURE_EN 0x020008
#define IDT_CFGBLK_ERR_REPORT 0xf20014
#define IDT_CFGBLK_ERR_REPORT_GENPW 0x00000002
#define IDT_AUX_PORT_ERR_CAP_EN 0x020000
#define IDT_AUX_ERR_REPORT_EN 0xf20018
#define IDT_AUX_PORT_ERR_LOG_I2C 0x00000002
#define IDT_AUX_PORT_ERR_LOG_JTAG 0x00000001
#define IDT_ISLTL_ADDRESS_CAP 0x021014
#define IDT_RIO_DOMAIN 0xf20020
#define IDT_RIO_DOMAIN_MASK 0x000000ff
#define IDT_PW_INFO_CSR 0xf20024
#define IDT_SOFT_RESET 0xf20040
#define IDT_SOFT_RESET_REQ 0x00030097
#define IDT_I2C_MCTRL 0xf20050
#define IDT_I2C_MCTRL_GENPW 0x04000000
#define IDT_JTAG_CTRL 0xf2005c
#define IDT_JTAG_CTRL_GENPW 0x00000002
#define IDT_LANE_CTRL(n) (0xff8000 + (n)*0x100)
#define IDT_LANE_CTRL_BC 0xffff00
#define IDT_LANE_CTRL_GENPW 0x00200000
#define IDT_LANE_DFE_1_BC 0xffff18
#define IDT_LANE_DFE_2_BC 0xffff1c
#define IDT_PORT_OPS(n) (0xf40004 + (n)*0x100)
#define IDT_PORT_OPS_GENPW 0x08000000
#define IDT_PORT_OPS_PL_ELOG 0x00000040
#define IDT_PORT_OPS_LL_ELOG 0x00000020
#define IDT_PORT_OPS_LT_ELOG 0x00000010
#define IDT_PORT_OPS_BC 0xf4ff04
#define IDT_PORT_ISERR_DET(n) (0xf40008 + (n)*0x100)
#define IDT_ERR_CAP 0xfd0000
#define IDT_ERR_CAP_LOG_OVERWR 0x00000004
#define IDT_ERR_RD 0xfd0004
#define IDT_DEFAULT_ROUTE 0xde
#define IDT_NO_ROUTE 0xdf
static int
idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port)
{
/*
* Select routing table to update
*/
if (table == RIO_GLOBAL_TABLE)
table = 0;
else
table++;
rio_mport_write_config_32(mport, destid, hopcount,
LOCAL_RTE_CONF_DESTID_SEL, table);
/*
* Program destination port for the specified destID
*/
rio_mport_write_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_DESTID_SEL_CSR,
(u32)route_destid);
rio_mport_write_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_PORT_SEL_CSR,
(u32)route_port);
udelay(10);
return 0;
}
static int
idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 *route_port)
{
u32 result;
/*
* Select routing table to read
*/
if (table == RIO_GLOBAL_TABLE)
table = 0;
else
table++;
rio_mport_write_config_32(mport, destid, hopcount,
LOCAL_RTE_CONF_DESTID_SEL, table);
rio_mport_write_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_DESTID_SEL_CSR,
route_destid);
rio_mport_read_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result)
*route_port = RIO_INVALID_ROUTE;
else
*route_port = (u8)result;
return 0;
}
static int
idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table)
{
u32 i;
/*
* Select routing table to read
*/
if (table == RIO_GLOBAL_TABLE)
table = 0;
else
table++;
rio_mport_write_config_32(mport, destid, hopcount,
LOCAL_RTE_CONF_DESTID_SEL, table);
for (i = RIO_STD_RTE_CONF_EXTCFGEN;
i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) {
rio_mport_write_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
rio_mport_write_config_32(mport, destid, hopcount,
RIO_STD_RTE_CONF_PORT_SEL_CSR,
(IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) |
(IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE);
i += 4;
}
return 0;
}
static int
idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
u8 sw_domain)
{
/*
* Switch domain configuration operates only at global level
*/
rio_mport_write_config_32(mport, destid, hopcount,
IDT_RIO_DOMAIN, (u32)sw_domain);
return 0;
}
static int
idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
u8 *sw_domain)
{
u32 regval;
/*
* Switch domain configuration operates only at global level
*/
rio_mport_read_config_32(mport, destid, hopcount,
IDT_RIO_DOMAIN, &regval);
*sw_domain = (u8)(regval & 0xff);
return 0;
}
static int
idtg2_em_init(struct rio_dev *rdev)
{
struct rio_mport *mport = rdev->net->hport;
u16 destid = rdev->rswitch->destid;
u8 hopcount = rdev->rswitch->hopcount;
u32 regval;
int i, tmp;
/*
* This routine performs device-specific initialization only.
* All standard EM configuration should be performed at upper level.
*/
pr_debug("RIO: %s [%d:%d]\n", __func__, destid, hopcount);
/* Set Port-Write info CSR: PRIO=3 and CRF=1 */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_PW_INFO_CSR, 0x0000e000);
/*
* Configure LT LAYER error reporting.
*/
/* Enable standard (RIO.p8) error reporting */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_LT_ERR_REPORT_EN,
REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR |
REM_LTL_ERR_UNSUPTR);
/* Use Port-Writes for LT layer error reporting.
* Enable per-port reset
*/
rio_mport_read_config_32(mport, destid, hopcount,
IDT_DEV_CTRL_1, &regval);
rio_mport_write_config_32(mport, destid, hopcount,
IDT_DEV_CTRL_1,
regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH);
/*
* Configure PORT error reporting.
*/
/* Report all RIO.p8 errors supported by device */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037);
/* Configure reporting of implementation specific errors/events */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_PORT_ISERR_REPORT_EN_BC, IDT_PORT_INIT_TX_ACQUIRED);
/* Use Port-Writes for port error reporting and enable error logging */
tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
for (i = 0; i < tmp; i++) {
rio_mport_read_config_32(mport, destid, hopcount,
IDT_PORT_OPS(i), &regval);
rio_mport_write_config_32(mport, destid, hopcount,
IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW |
IDT_PORT_OPS_PL_ELOG |
IDT_PORT_OPS_LL_ELOG |
IDT_PORT_OPS_LT_ELOG);
}
/* Overwrite error log if full */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR);
/*
* Configure LANE error reporting.
*/
/* Disable line error reporting */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_LANE_ERR_REPORT_EN_BC, 0);
/* Use Port-Writes for lane error reporting (when enabled)
* (do per-lane update because lanes may have different configuration)
*/
tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16;
for (i = 0; i < tmp; i++) {
rio_mport_read_config_32(mport, destid, hopcount,
IDT_LANE_CTRL(i), &regval);
rio_mport_write_config_32(mport, destid, hopcount,
IDT_LANE_CTRL(i), regval | IDT_LANE_CTRL_GENPW);
}
/*
* Configure AUX error reporting.
*/
/* Disable JTAG and I2C Error capture */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_AUX_PORT_ERR_CAP_EN, 0);
/* Disable JTAG and I2C Error reporting/logging */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_AUX_ERR_REPORT_EN, 0);
/* Disable Port-Write notification from JTAG */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_JTAG_CTRL, 0);
/* Disable Port-Write notification from I2C */
rio_mport_read_config_32(mport, destid, hopcount,
IDT_I2C_MCTRL, &regval);
rio_mport_write_config_32(mport, destid, hopcount,
IDT_I2C_MCTRL,
regval & ~IDT_I2C_MCTRL_GENPW);
/*
* Configure CFG_BLK error reporting.
*/
/* Disable Configuration Block error capture */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_CFGBLK_ERR_CAPTURE_EN, 0);
/* Disable Port-Writes for Configuration Block error reporting */
rio_mport_read_config_32(mport, destid, hopcount,
IDT_CFGBLK_ERR_REPORT, &regval);
rio_mport_write_config_32(mport, destid, hopcount,
IDT_CFGBLK_ERR_REPORT,
regval & ~IDT_CFGBLK_ERR_REPORT_GENPW);
/* set TVAL = ~50us */
rio_mport_write_config_32(mport, destid, hopcount,
rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
return 0;
}
static int
idtg2_em_handler(struct rio_dev *rdev, u8 portnum)
{
struct rio_mport *mport = rdev->net->hport;
u16 destid = rdev->rswitch->destid;
u8 hopcount = rdev->rswitch->hopcount;
u32 regval, em_perrdet, em_ltlerrdet;
rio_mport_read_config_32(mport, destid, hopcount,
rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
if (em_ltlerrdet) {
/* Service Logical/Transport Layer Error(s) */
if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) {
/* Implementation specific error reported */
rio_mport_read_config_32(mport, destid, hopcount,
IDT_ISLTL_ADDRESS_CAP, &regval);
pr_debug("RIO: %s Implementation Specific LTL errors" \
" 0x%x @(0x%x)\n",
rio_name(rdev), em_ltlerrdet, regval);
/* Clear implementation specific address capture CSR */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_ISLTL_ADDRESS_CAP, 0);
}
}
rio_mport_read_config_32(mport, destid, hopcount,
rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
if (em_perrdet) {
/* Service Port-Level Error(s) */
if (em_perrdet & REM_PED_IMPL_SPEC) {
/* Implementation Specific port error reported */
/* Get IS errors reported */
rio_mport_read_config_32(mport, destid, hopcount,
IDT_PORT_ISERR_DET(portnum), &regval);
pr_debug("RIO: %s Implementation Specific Port" \
" errors 0x%x\n", rio_name(rdev), regval);
/* Clear all implementation specific events */
rio_mport_write_config_32(mport, destid, hopcount,
IDT_PORT_ISERR_DET(portnum), 0);
}
}
return 0;
}
static ssize_t
idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf)
{
struct rio_dev *rdev = to_rio_dev(dev);
struct rio_mport *mport = rdev->net->hport;
u16 destid = rdev->rswitch->destid;
u8 hopcount = rdev->rswitch->hopcount;
ssize_t len = 0;
u32 regval;
while (!rio_mport_read_config_32(mport, destid, hopcount,
IDT_ERR_RD, &regval)) {
if (!regval) /* 0 = end of log */
break;
len += snprintf(buf + len, PAGE_SIZE - len,
"%08x\n", regval);
if (len >= (PAGE_SIZE - 10))
break;
}
return len;
}
static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL);
static int idtg2_sysfs(struct rio_dev *rdev, int create)
{
struct device *dev = &rdev->dev;
int err = 0;
if (create == RIO_SW_SYSFS_CREATE) {
/* Initialize sysfs entries */
err = device_create_file(dev, &dev_attr_errlog);
if (err)
dev_err(dev, "Unable create sysfs errlog file\n");
} else
device_remove_file(dev, &dev_attr_errlog);
return err;
}
static int idtg2_switch_init(struct rio_dev *rdev, int do_enum)
{
pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
rdev->rswitch->add_entry = idtg2_route_add_entry;
rdev->rswitch->get_entry = idtg2_route_get_entry;
rdev->rswitch->clr_table = idtg2_route_clr_table;
rdev->rswitch->set_domain = idtg2_set_domain;
rdev->rswitch->get_domain = idtg2_get_domain;
rdev->rswitch->em_init = idtg2_em_init;
rdev->rswitch->em_handle = idtg2_em_handler;
rdev->rswitch->sw_sysfs = idtg2_sysfs;
return 0;
}
DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1848, idtg2_switch_init);
DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1616, idtg2_switch_init);
......@@ -34,5 +34,7 @@
#define RIO_DID_IDTCPS16 0x035b
#define RIO_DID_IDTCPS6Q 0x035f
#define RIO_DID_IDTCPS10Q 0x035e
#define RIO_DID_IDTCPS1848 0x0374
#define RIO_DID_IDTCPS1616 0x0379
#endif /* LINUX_RIO_IDS_H */
......@@ -161,6 +161,7 @@
#define RIO_COMPONENT_TAG_CSR 0x6c /* [III] Component Tag CSR */
#define RIO_STD_RTE_CONF_DESTID_SEL_CSR 0x70
#define RIO_STD_RTE_CONF_EXTCFGEN 0x80000000
#define RIO_STD_RTE_CONF_PORT_SEL_CSR 0x74
#define RIO_STD_RTE_DEFAULT_PORT 0x78
......@@ -265,6 +266,10 @@
#define RIO_EM_EFB_HEADER 0x000 /* Error Management Extensions Block Header */
#define RIO_EM_LTL_ERR_DETECT 0x008 /* Logical/Transport Layer Error Detect CSR */
#define RIO_EM_LTL_ERR_EN 0x00c /* Logical/Transport Layer Error Enable CSR */
#define REM_LTL_ERR_ILLTRAN 0x08000000 /* Illegal Transaction decode */
#define REM_LTL_ERR_UNSOLR 0x00800000 /* Unsolicited Response */
#define REM_LTL_ERR_UNSUPTR 0x00400000 /* Unsupported Transaction */
#define REM_LTL_ERR_IMPSPEC 0x000000ff /* Implementation Specific */
#define RIO_EM_LTL_HIADDR_CAP 0x010 /* Logical/Transport Layer High Address Capture CSR */
#define RIO_EM_LTL_ADDR_CAP 0x014 /* Logical/Transport Layer Address Capture CSR */
#define RIO_EM_LTL_DEVID_CAP 0x018 /* Logical/Transport Layer Device ID Capture CSR */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册