提交 981ba657 编写于 作者: O Olof Johansson

Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes

Fixes for AT91 related to:
- move to sparse IRQ: some drivers were forgotten
- a DTS typo
- the delay for removal of old at91_mci driver

* tag 'at91-fixes' of git://github.com/at91linux/linux-at91:
  ARM: at91/feature-removal-schedule: delay at91_mci removal
  ARM: at91/dts: remove partial parameter in at91sam9g25ek.dts
  ARM: at91/clock: fix PLLA overclock warning
  ARM: at91: fix rtc-at91sam9 irq issue due to sparse irq support
  ARM: at91: fix system timer irq issue due to sparse irq support
...@@ -579,7 +579,7 @@ Why: KVM tracepoints provide mostly equivalent information in a much more ...@@ -579,7 +579,7 @@ Why: KVM tracepoints provide mostly equivalent information in a much more
---------------------------- ----------------------------
What: at91-mci driver ("CONFIG_MMC_AT91") What: at91-mci driver ("CONFIG_MMC_AT91")
When: 3.7 When: 3.8
Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support
was added to atmel-mci as a first step to support more chips. was added to atmel-mci as a first step to support more chips.
Then at91-mci was kept only for old IP versions (on at91rm9200 and Then at91-mci was kept only for old IP versions (on at91rm9200 and
......
...@@ -15,7 +15,7 @@ ...@@ -15,7 +15,7 @@
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
chosen { chosen {
bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
}; };
ahb { ahb {
......
...@@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void) ...@@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void)
at91_st_read(AT91_ST_SR); at91_st_read(AT91_ST_SR);
/* Make IRQs happen for the system timer */ /* Make IRQs happen for the system timer */
setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting * directly for the clocksource and all clockevents, after adjusting
......
...@@ -726,6 +726,8 @@ static struct resource rtt_resources[] = { ...@@ -726,6 +726,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { }, {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
}, },
}; };
...@@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void) ...@@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed: * The second resource is needed:
* GPBR will serve as the storage for RTC time offset * GPBR will serve as the storage for RTC time offset
*/ */
at91sam9260_rtt_device.num_resources = 2; at91sam9260_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9260_BASE_GPBR + rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3; rtt_resources[1].end = rtt_resources[1].start + 3;
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
} }
#else #else
static void __init at91_add_device_rtt_rtc(void) static void __init at91_add_device_rtt_rtc(void)
......
...@@ -609,6 +609,8 @@ static struct resource rtt_resources[] = { ...@@ -609,6 +609,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { }, {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
} }
}; };
...@@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void) ...@@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed: * The second resource is needed:
* GPBR will serve as the storage for RTC time offset * GPBR will serve as the storage for RTC time offset
*/ */
at91sam9261_rtt_device.num_resources = 2; at91sam9261_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9261_BASE_GPBR + rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3; rtt_resources[1].end = rtt_resources[1].start + 3;
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
} }
#else #else
static void __init at91_add_device_rtt_rtc(void) static void __init at91_add_device_rtt_rtc(void)
......
...@@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = { ...@@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { }, {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
} }
}; };
...@@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = { ...@@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { }, {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
} }
}; };
...@@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void) ...@@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed only for the chosen RTT: * The second resource is needed only for the chosen RTT:
* GPBR will serve as the storage for RTC time offset * GPBR will serve as the storage for RTC time offset
*/ */
at91sam9263_rtt0_device.num_resources = 2; at91sam9263_rtt0_device.num_resources = 3;
at91sam9263_rtt1_device.num_resources = 1; at91sam9263_rtt1_device.num_resources = 1;
pdev = &at91sam9263_rtt0_device; pdev = &at91sam9263_rtt0_device;
r = rtt0_resources; r = rtt0_resources;
break; break;
case 1: case 1:
at91sam9263_rtt0_device.num_resources = 1; at91sam9263_rtt0_device.num_resources = 1;
at91sam9263_rtt1_device.num_resources = 2; at91sam9263_rtt1_device.num_resources = 3;
pdev = &at91sam9263_rtt1_device; pdev = &at91sam9263_rtt1_device;
r = rtt1_resources; r = rtt1_resources;
break; break;
...@@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void) ...@@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void)
pdev->name = "rtc-at91sam9"; pdev->name = "rtc-at91sam9";
r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
r[1].end = r[1].start + 3; r[1].end = r[1].start + 3;
r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
} }
#else #else
static void __init at91_add_device_rtt_rtc(void) static void __init at91_add_device_rtt_rtc(void)
......
...@@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = { ...@@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { }, {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
} }
}; };
...@@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void) ...@@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed: * The second resource is needed:
* GPBR will serve as the storage for RTC time offset * GPBR will serve as the storage for RTC time offset
*/ */
at91sam9g45_rtt_device.num_resources = 2; at91sam9g45_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3; rtt_resources[1].end = rtt_resources[1].start + 3;
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
} }
#else #else
static void __init at91_add_device_rtt_rtc(void) static void __init at91_add_device_rtt_rtc(void)
......
...@@ -688,6 +688,8 @@ static struct resource rtt_resources[] = { ...@@ -688,6 +688,8 @@ static struct resource rtt_resources[] = {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, { }, {
.flags = IORESOURCE_MEM, .flags = IORESOURCE_MEM,
}, {
.flags = IORESOURCE_IRQ,
} }
}; };
...@@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void) ...@@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void)
* The second resource is needed: * The second resource is needed:
* GPBR will serve as the storage for RTC time offset * GPBR will serve as the storage for RTC time offset
*/ */
at91sam9rl_rtt_device.num_resources = 2; at91sam9rl_rtt_device.num_resources = 3;
rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
rtt_resources[1].end = rtt_resources[1].start + 3; rtt_resources[1].end = rtt_resources[1].start + 3;
rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
} }
#else #else
static void __init at91_add_device_rtt_rtc(void) static void __init at91_add_device_rtt_rtc(void)
......
...@@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); ...@@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
#define cpu_has_300M_plla() (cpu_is_at91sam9g10()) #define cpu_has_300M_plla() (cpu_is_at91sam9g10())
#define cpu_has_240M_plla() (cpu_is_at91sam9261() \
|| cpu_is_at91sam9263() \
|| cpu_is_at91sam9rl())
#define cpu_has_210M_plla() (cpu_is_at91sam9260())
#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
|| cpu_is_at91sam9g45() \ || cpu_is_at91sam9g45() \
|| cpu_is_at91sam9x5() \ || cpu_is_at91sam9x5() \
...@@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock) ...@@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock)
} else if (cpu_has_800M_plla()) { } else if (cpu_has_800M_plla()) {
if (plla.rate_hz > 800000000) if (plla.rate_hz > 800000000)
pll_overclock = true; pll_overclock = true;
} else if (cpu_has_240M_plla()) {
if (plla.rate_hz > 240000000)
pll_overclock = true;
} else if (cpu_has_210M_plla()) {
if (plla.rate_hz > 210000000)
pll_overclock = true;
} else { } else {
if (plla.rate_hz > 209000000) if (plla.rate_hz > 209000000)
pll_overclock = true; pll_overclock = true;
......
...@@ -58,6 +58,7 @@ struct sam9_rtc { ...@@ -58,6 +58,7 @@ struct sam9_rtc {
struct rtc_device *rtcdev; struct rtc_device *rtcdev;
u32 imr; u32 imr;
void __iomem *gpbr; void __iomem *gpbr;
int irq;
}; };
#define rtt_readl(rtc, field) \ #define rtt_readl(rtc, field) \
...@@ -292,7 +293,7 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) ...@@ -292,7 +293,7 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev)
{ {
struct resource *r, *r_gpbr; struct resource *r, *r_gpbr;
struct sam9_rtc *rtc; struct sam9_rtc *rtc;
int ret; int ret, irq;
u32 mr; u32 mr;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0); r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
...@@ -302,10 +303,18 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) ...@@ -302,10 +303,18 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev)
return -ENODEV; return -ENODEV;
} }
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "failed to get interrupt resource\n");
return irq;
}
rtc = kzalloc(sizeof *rtc, GFP_KERNEL); rtc = kzalloc(sizeof *rtc, GFP_KERNEL);
if (!rtc) if (!rtc)
return -ENOMEM; return -ENOMEM;
rtc->irq = irq;
/* platform setup code should have handled this; sigh */ /* platform setup code should have handled this; sigh */
if (!device_can_wakeup(&pdev->dev)) if (!device_can_wakeup(&pdev->dev))
device_init_wakeup(&pdev->dev, 1); device_init_wakeup(&pdev->dev, 1);
...@@ -345,11 +354,10 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev) ...@@ -345,11 +354,10 @@ static int __devinit at91_rtc_probe(struct platform_device *pdev)
} }
/* register irq handler after we know what name we'll use */ /* register irq handler after we know what name we'll use */
ret = request_irq(AT91_ID_SYS, at91_rtc_interrupt, ret = request_irq(rtc->irq, at91_rtc_interrupt, IRQF_SHARED,
IRQF_SHARED,
dev_name(&rtc->rtcdev->dev), rtc); dev_name(&rtc->rtcdev->dev), rtc);
if (ret) { if (ret) {
dev_dbg(&pdev->dev, "can't share IRQ %d?\n", AT91_ID_SYS); dev_dbg(&pdev->dev, "can't share IRQ %d?\n", rtc->irq);
rtc_device_unregister(rtc->rtcdev); rtc_device_unregister(rtc->rtcdev);
goto fail_register; goto fail_register;
} }
...@@ -386,7 +394,7 @@ static int __devexit at91_rtc_remove(struct platform_device *pdev) ...@@ -386,7 +394,7 @@ static int __devexit at91_rtc_remove(struct platform_device *pdev)
/* disable all interrupts */ /* disable all interrupts */
rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)); rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
free_irq(AT91_ID_SYS, rtc); free_irq(rtc->irq, rtc);
rtc_device_unregister(rtc->rtcdev); rtc_device_unregister(rtc->rtcdev);
...@@ -423,7 +431,7 @@ static int at91_rtc_suspend(struct platform_device *pdev, ...@@ -423,7 +431,7 @@ static int at91_rtc_suspend(struct platform_device *pdev,
rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN); rtc->imr = mr & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
if (rtc->imr) { if (rtc->imr) {
if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) { if (device_may_wakeup(&pdev->dev) && (mr & AT91_RTT_ALMIEN)) {
enable_irq_wake(AT91_ID_SYS); enable_irq_wake(rtc->irq);
/* don't let RTTINC cause wakeups */ /* don't let RTTINC cause wakeups */
if (mr & AT91_RTT_RTTINCIEN) if (mr & AT91_RTT_RTTINCIEN)
rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN); rtt_writel(rtc, MR, mr & ~AT91_RTT_RTTINCIEN);
...@@ -441,7 +449,7 @@ static int at91_rtc_resume(struct platform_device *pdev) ...@@ -441,7 +449,7 @@ static int at91_rtc_resume(struct platform_device *pdev)
if (rtc->imr) { if (rtc->imr) {
if (device_may_wakeup(&pdev->dev)) if (device_may_wakeup(&pdev->dev))
disable_irq_wake(AT91_ID_SYS); disable_irq_wake(rtc->irq);
mr = rtt_readl(rtc, MR); mr = rtt_readl(rtc, MR);
rtt_writel(rtc, MR, mr | rtc->imr); rtt_writel(rtc, MR, mr | rtc->imr);
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册