OMAP4: PandaBoard: remove unused power regulators

the pandaboard does not use the VUSIM or VAUX1 power regulators on the TWL6030
and are left floating. if the VUSIM and VAUX1 power regulators are initilized,
noise on the unloaded regulators generates an overcurrent interrupt causing the
system to power down. this patch removes the initialization of the unused power
regulators of VUSIM and VAUX1.
Signed-off-by: NDavid Anders <x0132446@ti.com>
Acked-by: NAndy Green <andy.green@linaro.org>
Acked-by: NAnand Gadiyar <gadiyar@ti.com>
Tested-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/board-omap4panda.c

@@ -280,19 +280,6 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	return 0;
 }
 
-static struct regulator_init_data omap4_panda_vaux1 = {
-	.constraints = {
-		.min_uV			= 1000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
 static struct regulator_init_data omap4_panda_vaux2 = {
 	.constraints = {
 		.min_uV			= 1200000,
@@ -348,19 +335,6 @@ static struct regulator_init_data omap4_panda_vpp = {
 	},
 };
 
-static struct regulator_init_data omap4_panda_vusim = {
-	.constraints = {
-		.min_uV			= 1200000,
-		.max_uV			= 2900000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
 static struct regulator_init_data omap4_panda_vana = {
 	.constraints = {
 		.min_uV			= 2100000,
@@ -413,12 +387,10 @@ static struct twl4030_platform_data omap4_panda_twldata = {
 	/* Regulators */
 	.vmmc		= &omap4_panda_vmmc,
 	.vpp		= &omap4_panda_vpp,
-	.vusim		= &omap4_panda_vusim,
 	.vana		= &omap4_panda_vana,
 	.vcxio		= &omap4_panda_vcxio,
 	.vdac		= &omap4_panda_vdac,
 	.vusb		= &omap4_panda_vusb,
-	.vaux1		= &omap4_panda_vaux1,
 	.vaux2		= &omap4_panda_vaux2,
 	.vaux3		= &omap4_panda_vaux3,
 	.usb		= &omap4_usbphy_data,