提交 6e2d4107 编写于 作者: D David Cohen 提交者: Tony Lindgren

ARM: OMAP1: Change the comments to C style

Change the comments to C style
Signed-off-by: NDavid Cohen <david.cohen@indt.org.br>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 78be6325
......@@ -135,21 +135,21 @@ static void __init ams_delta_init_irq(void)
}
static struct map_desc ams_delta_io_desc[] __initdata = {
// AMS_DELTA_LATCH1
/* AMS_DELTA_LATCH1 */
{
.virtual = AMS_DELTA_LATCH1_VIRT,
.pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
// AMS_DELTA_LATCH2
/* AMS_DELTA_LATCH2 */
{
.virtual = AMS_DELTA_LATCH2_VIRT,
.pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
// AMS_DELTA_MODEM
/* AMS_DELTA_MODEM */
{
.virtual = AMS_DELTA_MODEM_VIRT,
.pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS),
......
......@@ -309,18 +309,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
.pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
//.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
/*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "H2 TSC2101",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, // tsc2101_configure,
.codec_set_samplerate = NULL, // tsc2101_set_samplerate,
.codec_clock_setup = NULL, // tsc2101_clock_setup,
.codec_clock_on = NULL, // tsc2101_clock_on,
.codec_clock_off = NULL, // tsc2101_clock_off,
.get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
.codec_configure_dev = NULL, /* tsc2101_configure, */
.codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
.codec_clock_setup = NULL, /* tsc2101_clock_setup, */
.codec_clock_on = NULL, /* tsc2101_clock_on, */
.codec_clock_off = NULL, /* tsc2101_clock_off, */
.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
};
static struct platform_device h2_mcbsp1_device = {
......@@ -378,11 +378,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
.otg = 2,
#ifdef CONFIG_USB_GADGET_OMAP
.hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled
// .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback)
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
/* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
.hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled
.hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
#endif
.pins[1] = 3,
......@@ -443,7 +443,7 @@ static void __init h2_init(void)
omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
/* MMC: card detect and WP */
// omap_cfg_reg(U19_ARMIO1); /* CD */
/* omap_cfg_reg(U19_ARMIO1); */ /* CD */
omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
/* Irda */
......
......@@ -388,18 +388,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
.pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
//.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
/*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "H3 TSC2101",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, // tsc2101_configure,
.codec_set_samplerate = NULL, // tsc2101_set_samplerate,
.codec_clock_setup = NULL, // tsc2101_clock_setup,
.codec_clock_on = NULL, // tsc2101_clock_on,
.codec_clock_off = NULL, // tsc2101_clock_off,
.get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
.codec_configure_dev = NULL, /* tsc2101_configure, */
.codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
.codec_clock_setup = NULL, /* tsc2101_clock_setup, */
.codec_clock_on = NULL, /* tsc2101_clock_on, */
.codec_clock_off = NULL, /* tsc2101_clock_off, */
.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
};
static struct platform_device h3_mcbsp1_device = {
......
......@@ -134,12 +134,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
static struct omap_alsa_codec_config alsa_config = {
.name = "OMAP Innovator AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, // aic23_configure,
.codec_set_samplerate = NULL, // aic23_set_samplerate,
.codec_clock_setup = NULL, // aic23_clock_setup,
.codec_clock_on = NULL, // aic23_clock_on,
.codec_clock_off = NULL, // aic23_clock_off,
.get_default_samplerate = NULL, // aic23_get_default_samplerate,
.codec_configure_dev = NULL, /* aic23_configure, */
.codec_set_samplerate = NULL, /* aic23_set_samplerate, */
.codec_clock_setup = NULL, /* aic23_clock_setup, */
.codec_clock_on = NULL, /* aic23_clock_on, */
.codec_clock_off = NULL, /* aic23_clock_off, */
.get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device innovator_mcbsp1_device = {
......@@ -345,11 +345,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
.otg = 2,
#ifdef CONFIG_USB_GADGET_OMAP
.hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled
// .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback)
.hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
/* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */
#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
.hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled
.hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
#endif
.pins[1] = 3,
......
......@@ -160,12 +160,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
static struct omap_alsa_codec_config alsa_config = {
.name = "OSK AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, // aic23_configure,
.codec_set_samplerate = NULL, // aic23_set_samplerate,
.codec_clock_setup = NULL, // aic23_clock_setup,
.codec_clock_on = NULL, // aic23_clock_on,
.codec_clock_off = NULL, // aic23_clock_off,
.get_default_samplerate = NULL, // aic23_get_default_samplerate,
.codec_configure_dev = NULL, /* aic23_configure, */
.codec_set_samplerate = NULL, /* aic23_set_samplerate, */
.codec_clock_setup = NULL, /* aic23_clock_setup, */
.codec_clock_on = NULL, /* aic23_clock_on, */
.codec_clock_off = NULL, /* aic23_clock_off, */
.get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device osk5912_mcbsp1_device = {
......@@ -392,7 +392,7 @@ static void __init osk_mistral_init(void)
omap_cfg_reg(W13_1610_CCP_CLKM);
omap_cfg_reg(Y12_1610_CCP_CLKP);
/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
// omap_cfg_reg(Y14_1610_CCP_DATAM);
/* omap_cfg_reg(Y14_1610_CCP_DATAM); */
omap_cfg_reg(W14_1610_CCP_DATAP);
/* CAM_PWDN */
......@@ -404,8 +404,8 @@ static void __init osk_mistral_init(void)
pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
// omap_cfg_reg(P19_1610_GPIO6); // BUSY
omap_cfg_reg(P20_1610_GPIO4); // PENIRQ
/* omap_cfg_reg(P19_1610_GPIO6); */ /* BUSY */
omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */
set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
spi_register_board_info(mistral_boardinfo,
ARRAY_SIZE(mistral_boardinfo));
......
......@@ -144,12 +144,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
static struct omap_alsa_codec_config alsa_config = {
.name = "PalmTT AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, // aic23_configure,
.codec_set_samplerate = NULL, // aic23_set_samplerate,
.codec_clock_setup = NULL, // aic23_clock_setup,
.codec_clock_on = NULL, // aic23_clock_on,
.codec_clock_off = NULL, // aic23_clock_off,
.get_default_samplerate = NULL, // aic23_get_default_samplerate,
.codec_configure_dev = NULL, /* aic23_configure, */
.codec_set_samplerate = NULL, /* aic23_set_samplerate, */
.codec_clock_setup = NULL, /* aic23_clock_setup, */
.codec_clock_on = NULL, /* aic23_clock_on, */
.codec_clock_off = NULL, /* aic23_clock_off, */
.get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device palmtt_mcbsp1_device = {
......
//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text)
/*
* linux/arch/arm/mach-omap1/clock.c
*
......@@ -650,9 +649,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
/* FIXME: This clock seems to be necessary but no-one
* has asked for its activation. */
if (clk == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera
|| clk == &ck_dpll1out.clk // FIX: SoSSI, SSR
|| clk == &arm_gpio_ck // FIX: GPIO code for 1510
if (clk == &tc2_ck /* FIX: pm.c (SRAM), CCP, Camera */
|| clk == &ck_dpll1out.clk /* FIX: SoSSI, SSR */
|| clk == &arm_gpio_ck /* FIX: GPIO code for 1510 */
) {
printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
clk->name);
......
......@@ -82,7 +82,7 @@ static void mistral_setled(void)
red = 1;
else if (hw_led_state & IDLE_LED)
green = 1;
// else both sides are disabled
/* else both sides are disabled */
omap_set_gpio_dataout(GPIO_LED_GREEN, green);
omap_set_gpio_dataout(GPIO_LED_RED, red);
......@@ -112,7 +112,7 @@ void osk_leds_event(led_event_t evt)
case led_stop:
led_state &= ~LED_STATE_ENABLED;
hw_led_state = 0;
// NOTE: work may still be pending!!
/* NOTE: work may still be pending!! */
break;
case led_claim:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册