[POWERPC] Fix up interrupt senses for MPC85xx boards

The PHY is active-low on the MPC85xx CDS and the 8560 ADS just had
the wrong sense for the internal PCI and CPM interrupts.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc8541cds.dts

@@ -81,13 +81,13 @@
 			reg = <24520 20>;
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <5 0>;
+				interrupts = <5 1>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
-				interrupts = <5 0>;
+				interrupts = <5 1>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};

arch/powerpc/boot/dts/mpc8548cds.dts

@@ -81,25 +81,25 @@
 			reg = <24520 20>;
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <5 0>;
+				interrupts = <5 1>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
-				interrupts = <5 0>;
+				interrupts = <5 1>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
 			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
-				interrupts = <5 0>;
+				interrupts = <5 1>;
 				reg = <2>;
 				device_type = "ethernet-phy";
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
-				interrupts = <5 0>;
+				interrupts = <5 1>;
 				reg = <3>;
 				device_type = "ethernet-phy";
 			};

arch/powerpc/boot/dts/mpc8555cds.dts

@@ -81,13 +81,13 @@
 			reg = <24520 20>;
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <5 0>;
+				interrupts = <5 1>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
-				interrupts = <5 0>;
+				interrupts = <5 1>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};

arch/powerpc/boot/dts/mpc8560ads.dts

@@ -216,7 +216,7 @@
 					 a800 0 0 4 &mpic 1 1>;
 
 			interrupt-parent = <&mpic>;
-			interrupts = <18 0>;
+			interrupts = <18 2>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 80000000 80000000 0 20000000
 				  01000000 0 00000000 e2000000 0 01000000>;
@@ -246,7 +246,7 @@
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <2>;
-				interrupts = <2e 0>;
+				interrupts = <2e 2>;
 				interrupt-parent = <&mpic>;
 				reg = <90c00 80>;
 				built-in;