提交 4e4fd4e4 编写于 作者: S Stephen Hemminger 提交者: David S. Miller

ne2k: convert to net_device_ops

Convert driver to new net_device_ops. Compile tested only.
This required some additional work to export common code ei_XXX.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 99921b7e
......@@ -33,6 +33,11 @@ extern void ei_poll(struct net_device *dev);
extern void eip_poll(struct net_device *dev);
#endif
extern void ei_tx_timeout(struct net_device *dev);
extern int ei_start_xmit(struct sk_buff *skb, struct net_device *dev);
extern void ei_set_multicast_list(struct net_device *dev);
extern struct net_device_stats *ei_get_stats(struct net_device *dev);
/* Without I/O delay - non ISA or later chips */
extern void NS8390_init(struct net_device *dev, int startp);
extern int ei_open(struct net_device *dev);
......
......@@ -108,14 +108,13 @@ int ei_debug = 1;
/* Index to functions. */
static void ei_tx_intr(struct net_device *dev);
static void ei_tx_err(struct net_device *dev);
static void ei_tx_timeout(struct net_device *dev);
void ei_tx_timeout(struct net_device *dev);
static void ei_receive(struct net_device *dev);
static void ei_rx_overrun(struct net_device *dev);
/* Routines generic to NS8390-based boards. */
static void NS8390_trigger_send(struct net_device *dev, unsigned int length,
int start_page);
static void set_multicast_list(struct net_device *dev);
static void do_set_multicast_list(struct net_device *dev);
static void __NS8390_init(struct net_device *dev, int startp);
......@@ -208,8 +207,10 @@ static int __ei_open(struct net_device *dev)
/* The card I/O part of the driver (e.g. 3c503) can hook a Tx timeout
wrapper that does e.g. media check & then calls ei_tx_timeout. */
#ifdef CONFIG_COMPAT_NET_DEV_OPS
if (dev->tx_timeout == NULL)
dev->tx_timeout = ei_tx_timeout;
#endif
if (dev->watchdog_timeo <= 0)
dev->watchdog_timeo = TX_TIMEOUT;
......@@ -258,7 +259,7 @@ static int __ei_close(struct net_device *dev)
* completed (or failed) - i.e. never posted a Tx related interrupt.
*/
static void ei_tx_timeout(struct net_device *dev)
void ei_tx_timeout(struct net_device *dev)
{
unsigned long e8390_base = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
......@@ -295,6 +296,7 @@ static void ei_tx_timeout(struct net_device *dev)
enable_irq_lockdep(dev->irq);
netif_wake_queue(dev);
}
EXPORT_SYMBOL_GPL(ei_tx_timeout);
/**
* ei_start_xmit - begin packet transmission
......@@ -304,7 +306,7 @@ static void ei_tx_timeout(struct net_device *dev)
* Sends a packet to an 8390 network device.
*/
static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long e8390_base = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
......@@ -421,6 +423,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev)
return 0;
}
EXPORT_SYMBOL_GPL(ei_start_xmit);
/**
* ei_interrupt - handle the interrupts from an 8390
......@@ -882,7 +885,7 @@ static void ei_rx_overrun(struct net_device *dev)
* Collect the stats. This is called unlocked and from several contexts.
*/
static struct net_device_stats *get_stats(struct net_device *dev)
struct net_device_stats *ei_get_stats(struct net_device *dev)
{
unsigned long ioaddr = dev->base_addr;
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
......@@ -901,6 +904,7 @@ static struct net_device_stats *get_stats(struct net_device *dev)
return &dev->stats;
}
EXPORT_SYMBOL_GPL(ei_get_stats);
/*
* Form the 64 bit 8390 multicast table from the linked list of addresses
......@@ -991,7 +995,7 @@ static void do_set_multicast_list(struct net_device *dev)
* not called too often. Must protect against both bh and irq users
*/
static void set_multicast_list(struct net_device *dev)
void ei_set_multicast_list(struct net_device *dev)
{
unsigned long flags;
struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev);
......@@ -1000,6 +1004,7 @@ static void set_multicast_list(struct net_device *dev)
do_set_multicast_list(dev);
spin_unlock_irqrestore(&ei_local->page_lock, flags);
}
EXPORT_SYMBOL_GPL(ei_set_multicast_list);
/**
* ethdev_setup - init rest of 8390 device struct
......@@ -1015,10 +1020,11 @@ static void ethdev_setup(struct net_device *dev)
if (ei_debug > 1)
printk(version);
dev->hard_start_xmit = &ei_start_xmit;
dev->get_stats = get_stats;
dev->set_multicast_list = &set_multicast_list;
#ifdef CONFIG_COMPAT_NET_DEV_OPS
dev->hard_start_xmit = ei_start_xmit;
dev->get_stats = ei_get_stats;
dev->set_multicast_list = ei_set_multicast_list;
#endif
ether_setup(dev);
spin_lock_init(&ei_local->page_lock);
......
......@@ -200,6 +200,19 @@ struct ne2k_pci_card {
in the 'dev' and 'ei_status' structures.
*/
static const struct net_device_ops ne2k_netdev_ops = {
.ndo_open = ne2k_pci_open,
.ndo_stop = ne2k_pci_close,
.ndo_start_xmit = ei_start_xmit,
.ndo_tx_timeout = ei_tx_timeout,
.ndo_get_stats = ei_get_stats,
.ndo_set_multicast_list = ei_set_multicast_list,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = ei_poll,
#endif
};
static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent)
......@@ -265,6 +278,8 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
dev_err(&pdev->dev, "cannot allocate ethernet device\n");
goto err_out_free_res;
}
dev->netdev_ops = &ne2k_netdev_ops;
SET_NETDEV_DEV(dev, &pdev->dev);
/* Reset card. Who knows what dain-bramaged state it was left in. */
......@@ -353,12 +368,8 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
ei_status.block_output = &ne2k_pci_block_output;
ei_status.get_8390_hdr = &ne2k_pci_get_8390_hdr;
ei_status.priv = (unsigned long) pdev;
dev->open = &ne2k_pci_open;
dev->stop = &ne2k_pci_close;
dev->ethtool_ops = &ne2k_pci_ethtool_ops;
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = ei_poll;
#endif
NS8390_init(dev, 0);
i = register_netdev(dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册