提交 41ef84ce 编写于 作者: F Fugang Duan 提交者: David S. Miller

net: fec: change FEC alignment according to i.mx6 sx requirement

i.MX6 SX change FEC alignment requirement.
i.MX6 SX change internal bus from AHB to AXI.
It require RX buffer must be 64 bytes alignment.
And remove TX buffer alignment requirement.
Signed-off-by: NFugang Duan <B38611@freescale.com>
Signed-off-by: NFrank Li <Frank.Li@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 ba593e00
......@@ -443,6 +443,9 @@ struct fec_enet_private {
int hwts_tx_en;
struct delayed_work time_keep;
struct regulator *reg_phy;
unsigned int tx_align;
unsigned int rx_align;
};
void fec_ptp_init(struct platform_device *pdev);
......
......@@ -64,12 +64,6 @@
static void set_multicast_list(struct net_device *ndev);
#if defined(CONFIG_ARM)
#define FEC_ALIGNMENT 0xf
#else
#define FEC_ALIGNMENT 0x3
#endif
#define DRIVER_NAME "fec"
#define FEC_ENET_GET_QUQUE(_x) ((_x == 0) ? 1 : ((_x == 1) ? 2 : 0))
......@@ -434,7 +428,7 @@ fec_enet_txq_submit_frag_skb(struct fec_enet_priv_tx_q *txq,
bufaddr = page_address(this_frag->page.p) + this_frag->page_offset;
index = fec_enet_get_bd_index(txq->tx_bd_base, bdp, fep);
if (((unsigned long) bufaddr) & FEC_ALIGNMENT ||
if (((unsigned long) bufaddr) & fep->tx_align ||
id_entry->driver_data & FEC_QUIRK_SWAP_FRAME) {
memcpy(txq->tx_bounce[index], bufaddr, frag_len);
bufaddr = txq->tx_bounce[index];
......@@ -514,7 +508,7 @@ static int fec_enet_txq_submit_skb(struct fec_enet_priv_tx_q *txq,
queue = skb_get_queue_mapping(skb);
index = fec_enet_get_bd_index(txq->tx_bd_base, bdp, fep);
if (((unsigned long) bufaddr) & FEC_ALIGNMENT ||
if (((unsigned long) bufaddr) & fep->tx_align ||
id_entry->driver_data & FEC_QUIRK_SWAP_FRAME) {
memcpy(txq->tx_bounce[index], skb->data, buflen);
bufaddr = txq->tx_bounce[index];
......@@ -607,7 +601,7 @@ fec_enet_txq_put_data_tso(struct fec_enet_priv_tx_q *txq, struct sk_buff *skb,
status |= (BD_ENET_TX_TC | BD_ENET_TX_READY);
if (((unsigned long) data) & FEC_ALIGNMENT ||
if (((unsigned long) data) & fep->tx_align ||
id_entry->driver_data & FEC_QUIRK_SWAP_FRAME) {
memcpy(txq->tx_bounce[index], data, size);
data = txq->tx_bounce[index];
......@@ -669,7 +663,7 @@ fec_enet_txq_put_hdr_tso(struct fec_enet_priv_tx_q *txq,
bufaddr = txq->tso_hdrs + index * TSO_HEADER_SIZE;
dmabuf = txq->tso_hdrs_dma + index * TSO_HEADER_SIZE;
if (((unsigned long) bufaddr) & FEC_ALIGNMENT ||
if (((unsigned long)bufaddr) & fep->tx_align ||
id_entry->driver_data & FEC_QUIRK_SWAP_FRAME) {
memcpy(txq->tx_bounce[index], skb->data, hdr_len);
bufaddr = txq->tx_bounce[index];
......@@ -2399,6 +2393,7 @@ fec_enet_alloc_rxq_buffers(struct net_device *ndev, unsigned int queue)
struct sk_buff *skb;
struct bufdesc *bdp;
struct fec_enet_priv_rx_q *rxq;
unsigned int off;
rxq = fep->rx_queue[queue];
bdp = rxq->rx_bd_base;
......@@ -2409,8 +2404,13 @@ fec_enet_alloc_rxq_buffers(struct net_device *ndev, unsigned int queue)
if (!skb)
goto err_alloc;
off = ((unsigned long)skb->data) & fep->rx_align;
if (off)
skb_reserve(skb, fep->rx_align + 1 - off);
addr = dma_map_single(&fep->pdev->dev, skb->data,
FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE);
FEC_ENET_RX_FRSIZE - fep->rx_align, DMA_FROM_DEVICE);
if (dma_mapping_error(&fep->pdev->dev, addr)) {
dev_kfree_skb(skb);
if (net_ratelimit())
......@@ -2743,6 +2743,14 @@ static int fec_enet_init(struct net_device *ndev)
int bd_size;
unsigned int i;
#if defined(CONFIG_ARM)
fep->rx_align = 0xf;
fep->tx_align = 0xf;
#else
fep->rx_align = 0x3;
fep->tx_align = 0x3;
#endif
fec_enet_alloc_queue(ndev);
if (fep->bufdesc_ex)
......@@ -2819,6 +2827,11 @@ static int fec_enet_init(struct net_device *ndev)
fep->csum_flags |= FLAG_RX_CSUM_ENABLED;
}
if (id_entry->driver_data & FEC_QUIRK_HAS_AVB) {
fep->tx_align = 0;
fep->rx_align = 0x3f;
}
ndev->hw_features = ndev->features;
fec_restart(ndev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册