提交 187bc4f6 编写于 作者: W Wey-Yi Guy

iwlagn: remove unsupported BT SCO command

During the period of BT coex changes, REPLY_BT_COEX_SCO host command
is no longer needed to support SCO/eSCO type of traffic. delete it.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
上级 96234cc8
......@@ -1863,21 +1863,6 @@ void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd))
IWL_ERR(priv, "failed to send BT Coex Config\n");
/*
* When we are doing a restart, need to also reconfigure BT
* SCO to the device. If not doing a restart, bt_sco_active
* will always be false, so there's no need to have an extra
* variable to check for it.
*/
if (priv->bt_sco_active) {
struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
if (priv->bt_sco_active)
sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_SCO,
sizeof(sco_cmd), &sco_cmd))
IWL_ERR(priv, "failed to send BT SCO command\n");
}
}
static void iwlagn_bt_traffic_change_work(struct work_struct *work)
......@@ -2069,15 +2054,6 @@ void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
queue_work(priv->workqueue,
&priv->bt_traffic_change_work);
}
if (priv->bt_sco_active !=
(uart_msg->frame3 & BT_UART_MSG_FRAME3SCOESCO_MSK)) {
priv->bt_sco_active = uart_msg->frame3 &
BT_UART_MSG_FRAME3SCOESCO_MSK;
if (priv->bt_sco_active)
sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
iwl_send_cmd_pdu_async(priv, REPLY_BT_COEX_SCO,
sizeof(sco_cmd), &sco_cmd, NULL);
}
}
iwlagn_set_kill_msk(priv, uart_msg);
......
......@@ -2780,7 +2780,6 @@ static void __iwl_down(struct iwl_priv *priv)
priv->cfg->bt_params->bt_init_traffic_load;
else
priv->bt_traffic_load = 0;
priv->bt_sco_active = false;
priv->bt_full_concurrent = false;
priv->bt_ci_compliance = 0;
......@@ -3099,7 +3098,7 @@ static void iwl_bg_restart(struct work_struct *data)
if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
struct iwl_rxon_context *ctx;
bool bt_sco, bt_full_concurrent;
bool bt_full_concurrent;
u8 bt_ci_compliance;
u8 bt_load;
u8 bt_status;
......@@ -3118,7 +3117,6 @@ static void iwl_bg_restart(struct work_struct *data)
* re-configure the hw when we reconfigure the BT
* command.
*/
bt_sco = priv->bt_sco_active;
bt_full_concurrent = priv->bt_full_concurrent;
bt_ci_compliance = priv->bt_ci_compliance;
bt_load = priv->bt_traffic_load;
......@@ -3126,7 +3124,6 @@ static void iwl_bg_restart(struct work_struct *data)
__iwl_down(priv);
priv->bt_sco_active = bt_sco;
priv->bt_full_concurrent = bt_full_concurrent;
priv->bt_ci_compliance = bt_ci_compliance;
priv->bt_traffic_load = bt_load;
......
......@@ -178,7 +178,6 @@ enum {
REPLY_BT_COEX_PRIO_TABLE = 0xcc,
REPLY_BT_COEX_PROT_ENV = 0xcd,
REPLY_BT_COEX_PROFILE_NOTIF = 0xce,
REPLY_BT_COEX_SCO = 0xcf,
/* PAN commands */
REPLY_WIPAN_PARAMS = 0xb2,
......
......@@ -1587,10 +1587,9 @@ static ssize_t iwl_dbgfs_bt_traffic_read(struct file *file,
"last traffic notif: %d\n",
priv->bt_status ? "On" : "Off", priv->last_bt_traffic_load);
pos += scnprintf(buf + pos, bufsz - pos, "ch_announcement: %d, "
"sco_active: %d, kill_ack_mask: %x, "
"kill_cts_mask: %x\n",
priv->bt_ch_announce, priv->bt_sco_active,
priv->kill_ack_mask, priv->kill_cts_mask);
"kill_ack_mask: %x, kill_cts_mask: %x\n",
priv->bt_ch_announce, priv->kill_ack_mask,
priv->kill_cts_mask);
pos += scnprintf(buf + pos, bufsz - pos, "bluetooth traffic load: ");
switch (priv->bt_traffic_load) {
......
......@@ -1504,7 +1504,6 @@ struct iwl_priv {
u8 bt_status;
u8 bt_traffic_load, last_bt_traffic_load;
bool bt_ch_announce;
bool bt_sco_active;
bool bt_full_concurrent;
bool bt_ant_couple_ok;
__le32 kill_ack_mask;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册