Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: gadget: fix EEM gadget CRC usage
  USB: otg Kconfig: let USB_OTG_UTILS select USB_ULPI option
  USB: g_multi: fix CONFIG_USB_G_MULTI_RNDIS usage
  kfifo: Don't use integer as NULL pointer
  USB: FHCI: Fix build after kfifo rework
  kfifo: Make kfifo_initialized work after kfifo_free
  USB: serial: add usbid for dell wwan card to sierra.c
  USB: SIS USB2VGA DRIVER: support KAIREN's USB VGA adaptor USB20SVGA-MB-PLUS
  USB: ehci: phy low power mode bug fixing
  USB: s3c-hsotg: Export usb_gadget_register_driver()
  USB: r8a66597-udc: Prototype IS_ERR() and PTR_ERR()
  USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT)
  USB: storage: Remove unneeded SC/PR from unusual_devs.h
  USB: ftdi_sio: new device id for papouch AD4USB
  USB: usbfs: properly clean up the as structure on error paths
  USB: usbfs: only copy the actual data received

drivers/usb/core/devio.c

@@ -1312,9 +1312,9 @@ static int processcompl(struct async *as, void __user * __user *arg)
 	void __user *addr = as->userurb;
 	unsigned int i;
 
-	if (as->userbuffer)
+	if (as->userbuffer && urb->actual_length)
 		if (copy_to_user(as->userbuffer, urb->transfer_buffer,
-				 urb->transfer_buffer_length))
+				 urb->actual_length))
 			goto err_out;
 	if (put_user(as->status, &userurb->status))
 		goto err_out;
@@ -1334,14 +1334,11 @@ static int processcompl(struct async *as, void __user * __user *arg)
 		}
 	}
 
-	free_async(as);
-
 	if (put_user(addr, (void __user * __user *)arg))
 		return -EFAULT;
 	return 0;
 
 err_out:
-	free_async(as);
 	return -EFAULT;
 }
 
@@ -1371,8 +1368,11 @@ static struct async *reap_as(struct dev_state *ps)
 static int proc_reapurb(struct dev_state *ps, void __user *arg)
 {
 	struct async *as = reap_as(ps);
-	if (as)
-		return processcompl(as, (void __user * __user *)arg);
+	if (as) {
+		int retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
 	if (signal_pending(current))
 		return -EINTR;
 	return -EIO;
@@ -1380,11 +1380,16 @@ static int proc_reapurb(struct dev_state *ps, void __user *arg)
 
 static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg)
 {
+	int retval;
 	struct async *as;
 
-	if (!(as = async_getcompleted(ps)))
-		return -EAGAIN;
-	return processcompl(as, (void __user * __user *)arg);
+	as = async_getcompleted(ps);
+	retval = -EAGAIN;
+	if (as) {
+		retval = processcompl(as, (void __user * __user *)arg);
+		free_async(as);
+	}
+	return retval;
 }
 
 #ifdef CONFIG_COMPAT
@@ -1475,9 +1480,9 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
 	void __user *addr = as->userurb;
 	unsigned int i;
 
-	if (as->userbuffer)
+	if (as->userbuffer && urb->actual_length)
 		if (copy_to_user(as->userbuffer, urb->transfer_buffer,
-				 urb->transfer_buffer_length))
+				 urb->actual_length))
 			return -EFAULT;
 	if (put_user(as->status, &userurb->status))
 		return -EFAULT;
@@ -1497,7 +1502,6 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
 		}
 	}
 
-	free_async(as);
 	if (put_user(ptr_to_compat(addr), (u32 __user *)arg))
 		return -EFAULT;
 	return 0;
@@ -1506,8 +1510,11 @@ static int processcompl_compat(struct async *as, void __user * __user *arg)
 static int proc_reapurb_compat(struct dev_state *ps, void __user *arg)
 {
 	struct async *as = reap_as(ps);
-	if (as)
-		return processcompl_compat(as, (void __user * __user *)arg);
+	if (as) {
+		int retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+		return retval;
+	}
 	if (signal_pending(current))
 		return -EINTR;
 	return -EIO;
@@ -1515,11 +1522,16 @@ static int proc_reapurb_compat(struct dev_state *ps, void __user *arg)
 
 static int proc_reapurbnonblock_compat(struct dev_state *ps, void __user *arg)
 {
+	int retval;
 	struct async *as;
 
-	if (!(as = async_getcompleted(ps)))
-		return -EAGAIN;
-	return processcompl_compat(as, (void __user * __user *)arg);
+	retval = -EAGAIN;
+	as = async_getcompleted(ps);
+	if (as) {
+		retval = processcompl_compat(as, (void __user * __user *)arg);
+		free_async(as);
+	}
+	return retval;
 }
 
 

drivers/usb/gadget/f_eem.c

@@ -358,7 +358,7 @@ done:
 	 * b15:		bmType (0 == data)
 	 */
 	len = skb->len;
-	put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2));
+	put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2));
 
 	/* add a zero-length EEM packet, if needed */
 	if (padlen)
@@ -464,7 +464,6 @@ static int eem_unwrap(struct gether *port,
 			}
 
 			/* validate CRC */
-			crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN);
 			if (header & BIT(14)) {
 				crc = get_unaligned_le32(skb->data + len
 							- ETH_FCS_LEN);

drivers/usb/gadget/multi.c

@@ -29,7 +29,7 @@
 #if defined USB_ETH_RNDIS
 #  undef USB_ETH_RNDIS
 #endif
-#ifdef CONFIG_USB_ETH_RNDIS
+#ifdef CONFIG_USB_G_MULTI_RNDIS
 #  define USB_ETH_RNDIS y
 #endif
 

drivers/usb/gadget/r8a66597-udc.c

@@ -26,6 +26,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>

drivers/usb/gadget/s3c-hsotg.c

@@ -2582,6 +2582,7 @@ err:
 	hsotg->gadget.dev.driver = NULL;
 	return ret;
 }
+EXPORT_SYMBOL(usb_gadget_register_driver);
 
 int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 {

drivers/usb/host/ehci-hub.c

@@ -196,7 +196,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 			if (hostpc_reg) {
 				u32	t3;
 
+				spin_unlock_irq(&ehci->lock);
 				msleep(5);/* 5ms for HCD enter low pwr mode */
+				spin_lock_irq(&ehci->lock);
 				t3 = ehci_readl(ehci, hostpc_reg);
 				ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
 				t3 = ehci_readl(ehci, hostpc_reg);
@@ -904,17 +906,18 @@ static int ehci_hub_control (
 			if ((temp & PORT_PE) == 0
 					|| (temp & PORT_RESET) != 0)
 				goto error;
-			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
 			/* After above check the port must be connected.
 			 * Set appropriate bit thus could put phy into low power
 			 * mode if we have hostpc feature
 			 */
+			temp &= ~PORT_WKCONN_E;
+			temp |= PORT_WKDISC_E | PORT_WKOC_E;
+			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
 			if (hostpc_reg) {
-				temp &= ~PORT_WKCONN_E;
-				temp |= (PORT_WKDISC_E | PORT_WKOC_E);
-				ehci_writel(ehci, temp | PORT_SUSPEND,
-							status_reg);
+				spin_unlock_irqrestore(&ehci->lock, flags);
 				msleep(5);/* 5ms for HCD enter low pwr mode */
+				spin_lock_irqsave(&ehci->lock, flags);
 				temp1 = ehci_readl(ehci, hostpc_reg);
 				ehci_writel(ehci, temp1 | HOSTPC_PHCD,
 					hostpc_reg);

drivers/usb/host/fhci-tds.c

@@ -105,7 +105,7 @@ void fhci_ep0_free(struct fhci_usb *usb)
 		if (ep->td_base)
 			cpm_muram_free(cpm_muram_offset(ep->td_base));
 
-		if (ep->conf_frame_Q) {
+		if (kfifo_initialized(&ep->conf_frame_Q)) {
 			size = cq_howmany(&ep->conf_frame_Q);
 			for (; size; size--) {
 				struct packet *pkt = cq_get(&ep->conf_frame_Q);
@@ -115,7 +115,7 @@ void fhci_ep0_free(struct fhci_usb *usb)
 			cq_delete(&ep->conf_frame_Q);
 		}
 
-		if (ep->empty_frame_Q) {
+		if (kfifo_initialized(&ep->empty_frame_Q)) {
 			size = cq_howmany(&ep->empty_frame_Q);
 			for (; size; size--) {
 				struct packet *pkt = cq_get(&ep->empty_frame_Q);
@@ -125,7 +125,7 @@ void fhci_ep0_free(struct fhci_usb *usb)
 			cq_delete(&ep->empty_frame_Q);
 		}
 
-		if (ep->dummy_packets_Q) {
+		if (kfifo_initialized(&ep->dummy_packets_Q)) {
 			size = cq_howmany(&ep->dummy_packets_Q);
 			for (; size; size--) {
 				u8 *buff = cq_get(&ep->dummy_packets_Q);

drivers/usb/misc/sisusbvga/sisusb.c

@@ -3245,6 +3245,7 @@ static struct usb_device_id sisusb_table [] = {
 	{ USB_DEVICE(0x0711, 0x0902) },
 	{ USB_DEVICE(0x0711, 0x0903) },
 	{ USB_DEVICE(0x0711, 0x0918) },
+	{ USB_DEVICE(0x0711, 0x0920) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }

drivers/usb/otg/Kconfig

@@ -44,6 +44,7 @@ config ISP1301_OMAP
 config USB_ULPI
 	bool "Generic ULPI Transceiver Driver"
 	depends on ARM
+	select USB_OTG_UTILS
 	help
 	  Enable this to support ULPI connected USB OTG transceivers which
 	  are likely found on embedded boards.

drivers/usb/serial/ftdi_sio.c

@@ -50,7 +50,7 @@
  * Version Information
  */
 #define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr"
 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
 
 static int debug;
@@ -145,10 +145,15 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 
 
 
+/*
+ * Device ID not listed? Test via module params product/vendor or
+ * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
+ */
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -552,9 +557,16 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
 	/*
-	 * Due to many user requests for multiple ELV devices we enable
-	 * them by default.
+	 * ELV devices:
 	 */
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
@@ -571,11 +583,17 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -697,6 +715,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },

drivers/usb/serial/ftdi_sio_ids.h

@@ -38,6 +38,8 @@
 /* www.candapter.com Ewert Energy Systems CANdapter device */
 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
 
+#define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
+
 /* OOCDlink by Joern Kaipf <joernk@web.de>
  * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
 #define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
@@ -161,22 +163,37 @@
 /*
  * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
  * All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
  *
  * The previously included PID for the UO 100 module was incorrect.
  * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
  *
  * Armin Laeuger originally sent the PID for the UM 100 module.
  */
+#define FTDI_ELV_USR_PID	0xE000	/* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID	0xE001	/* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID	0xE002	/* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID	0xE004	/* WS 550 */
+#define FTDI_ELV_EC3000_PID	0xE006	/* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID	0xE008	/* WS 888 */
+#define FTDI_ELV_TWS550_PID	0xE009	/* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID	0xE00A	/* Funk Energie Monitor */
 #define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
 #define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
 #define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID	0xE0EB	/* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID	0xE0EC	/* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID	0xE0ED	/* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID	0xE0EE	/* Conrad WS 777 */
 #define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
 #define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
 #define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
 #define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
 #define FTDI_ELV_RFP500_PID	0xE0F3	/* HF-Leistungsmesser (RFP 500) */
 #define FTDI_ELV_FS20SIG_PID	0xE0F4	/* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID	0xE0F5	/* ELV UTP 8 */
 #define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID	0xE0F7	/* Conrad WS 444 PC */
 #define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
 #define FTDI_ELV_UAD8_PID	0xF068	/* USB-AD-Wandler (UAD 8) */
 #define FTDI_ELV_UDA7_PID	0xF069	/* USB-DA-Wandler (UDA 7) */
@@ -968,6 +985,7 @@
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
 #define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
+#define PAPOUCH_AD4USB_PID		0x8003	/* AD4USB Measurement Module */
 
 /*
  * Marvell SheevaPlug

drivers/usb/serial/sierra.c

@@ -298,6 +298,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+       { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }
 };

drivers/usb/storage/unusual_devs.h

@@ -941,7 +941,7 @@ UNUSUAL_DEV(  0x07ab, 0xfccd, 0x0000, 0x9999,
 UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133,
 		"Microtech",
 		"USB-SCSI-DB25",
-		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ), 
 
 UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100,

include/linux/kfifo.h

@@ -124,7 +124,7 @@ extern __must_check unsigned int kfifo_out_peek(struct kfifo *fifo,
  */
 static inline bool kfifo_initialized(struct kfifo *fifo)
 {
-	return fifo->buffer != 0;
+	return fifo->buffer != NULL;
 }
 
 /**

kernel/kfifo.c

@@ -80,7 +80,7 @@ int kfifo_alloc(struct kfifo *fifo, unsigned int size, gfp_t gfp_mask)
 
 	buffer = kmalloc(size, gfp_mask);
 	if (!buffer) {
-		_kfifo_init(fifo, 0, 0);
+		_kfifo_init(fifo, NULL, 0);
 		return -ENOMEM;
 	}
 
@@ -97,6 +97,7 @@ EXPORT_SYMBOL(kfifo_alloc);
 void kfifo_free(struct kfifo *fifo)
 {
 	kfree(fifo->buffer);
+	_kfifo_init(fifo, NULL, 0);
 }
 EXPORT_SYMBOL(kfifo_free);