提交 0517fe6a 编写于 作者: C Cosmin Stoica 提交者: Shawn Guo

ARM: dts: vf610-twr: Add support for sdhc1

The kernel was not able to boot from SD card because sdhc support
was not present into the dts.

A new entry for sdhc1 was added for vf610-twr board based on the
compatible entry present on imx53.

After applying these changes, the kernel is able to boot successfully
from SD card.
Signed-off-by: NCosmin Stoica <cosminstefan.stoica@freescale.com>
Signed-off-by: NChircu Bogdan <Bogdan.Chircu@freescale.com>
Signed-off-by: NEddy Petrisor <eddy.petrisor@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
上级 707e6906
......@@ -113,6 +113,13 @@
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
status = "okay";
};
&fec0 {
phy-mode = "rmii";
pinctrl-names = "default";
......@@ -160,6 +167,18 @@
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTA7__GPIO_134 0x219d
>;
};
pinctrl_fec0: fec0grp {
fsl,pins = <
VF610_PAD_PTA6__RMII_CLKIN 0x30d1
......
......@@ -347,6 +347,17 @@
status = "disabled";
};
esdhc1: esdhc@400b2000 {
compatible = "fsl,imx53-esdhc";
reg = <0x400b2000 0x4000>;
interrupts = <0 28 0x04>;
clocks = <&clks VF610_CLK_IPG_BUS>,
<&clks VF610_CLK_PLATFORM_BUS>,
<&clks VF610_CLK_ESDHC1>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册