Skip to content

R
rt-thread

lfmiao0 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

提交 fac43080 编写于 作者: S SummerGift
浏览文件
操作

[components][driver]: change to new spi API

上级 92fac771
隐藏空白更改
内联 并排
Showing with 64 addition and 96 deletion
components/drivers/spi/spi_msd.c
浏览文件 @ fac43080
......@@ -37,8 +37,6 @@ static struct msd_device _msd_device;
static rt_bool_t rt_tick_timeout(rt_tick_t tick_start, rt_tick_t tick_long);
static rt_err_t MSD_take_owner(struct rt_spi_device *spi_device);
static void MSD_take_cs(struct rt_spi_device *device);
static void MSD_release_cs(struct rt_spi_device *device);
static rt_err_t _wait_token(struct rt_spi_device *device, uint8_t token);
static rt_err_t _wait_ready(struct rt_spi_device *device);
......@@ -73,36 +71,6 @@ static rt_err_t MSD_take_owner(struct rt_spi_device *spi_device)
return result;
}
static void MSD_take_cs(struct rt_spi_device *device)
{
struct rt_spi_message message;
/* initial message */
message.send_buf = RT_NULL;
message.recv_buf = RT_NULL;
message.length = 0;
message.cs_take = 1;
message.cs_release = 0;
/* transfer message */
device->bus->ops->xfer(device, &message);
}
static void MSD_release_cs(struct rt_spi_device *device)
{
struct rt_spi_message message;
/* initial message */
message.send_buf = RT_NULL;
message.recv_buf = RT_NULL;
message.length = 0;
message.cs_take = 0;
message.cs_release = 1;
/* transfer message */
device->bus->ops->xfer(device, &message);
}
static rt_bool_t rt_tick_timeout(rt_tick_t tick_start, rt_tick_t tick_long)
{
rt_tick_t tick_end = tick_start + tick_long;
......@@ -517,7 +485,7 @@ static rt_err_t rt_msd_init(rt_device_t dev)
goto _exit;
}
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
/* The host shall supply power to the card so that the voltage is reached to Vdd_min within 250ms and
start to supply at least 74 SD clocks to the SD card with keeping CMD line to high.
......@@ -542,9 +510,9 @@ static rt_err_t rt_msd_init(rt_device_t dev)
while (1)
{
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, GO_IDLE_STATE, 0x00, 0x95, response_r1, response);
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
if ((result == RT_EOK) && (response[0] == MSD_IN_IDLE_STATE))
{
......@@ -568,9 +536,9 @@ static rt_err_t rt_msd_init(rt_device_t dev)
do
{
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, SEND_IF_COND, 0x01AA, 0x87, response_r7, response);
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
if (result == RT_EOK)
{
......@@ -622,23 +590,23 @@ static rt_err_t rt_msd_init(rt_device_t dev)
/* try SD Ver1.x */
while (1)
{
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, READ_OCR, 0x00, 0x00, response_r3, response);
if (result != RT_EOK)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[info] It maybe SD1.x or MMC But it is Not response to CMD58!\r\n");
goto _exit;
}
if (0 != (response[0] & 0xFE))
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[info] It look CMD58 as illegal command so it is not SD card!\r\n");
break;
}
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
OCR = response[1];
OCR = (OCR << 8) + response[2];
......@@ -661,24 +629,24 @@ static rt_err_t rt_msd_init(rt_device_t dev)
{
if (rt_tick_timeout(tick_start, rt_tick_from_millisecond(CARD_TRY_TIMES_ACMD41)))
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[info] try CMD55 + ACMD41 timeout! mabey MMC card!\r\n");
break;
}
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
/* CMD55 APP_CMD */
result = _send_cmd(msd->spi_device, APP_CMD, 0x00, 0x00, response_r1, response);
if (result != RT_EOK)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
continue;
}
if (0 != (response[0] & 0xFE))
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[info] Not SD card2 , may be MMC\r\n");
break;
}
......@@ -687,20 +655,20 @@ static rt_err_t rt_msd_init(rt_device_t dev)
result = _send_cmd(msd->spi_device, SD_SEND_OP_COND, 0x00, 0x00, response_r1, response);
if (result != RT_EOK)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
continue;
}
if (0 != (response[0] & 0xFE))
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[info] Not SD card4 , may be MMC\r\n");
break;
}
if (0 == (response[0] & 0xFF))
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
is_sd_v1_x = RT_TRUE;
MSD_DEBUG("[info] It is Ver1.X SD Memory Card!!!\r\n");
break;
......@@ -716,7 +684,7 @@ static rt_err_t rt_msd_init(rt_device_t dev)
uint32_t i;
MSD_DEBUG("[info] try MMC card!\r\n");
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
/* send dummy clock */
{
......@@ -740,9 +708,9 @@ static rt_err_t rt_msd_init(rt_device_t dev)
tick_start = rt_tick_get();
while (1)
{
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, GO_IDLE_STATE, 0x00, 0x95, response_r1, response);
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
if ((result == RT_EOK) && (response[0] == MSD_IN_IDLE_STATE))
{
......@@ -761,9 +729,9 @@ static rt_err_t rt_msd_init(rt_device_t dev)
tick_start = rt_tick_get();
while (1)
{
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, SEND_OP_COND, 0x00, 0x00, response_r1, response);
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
if ((result == RT_EOK) && (response[0] == MSD_RESPONSE_NO_ERROR))
{
......@@ -783,25 +751,25 @@ static rt_err_t rt_msd_init(rt_device_t dev)
}
else if (msd->card_type == MSD_CARD_TYPE_SD_V2_X)
{
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, READ_OCR, 0x00, 0x00, response_r3, response);
if (result != RT_EOK)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[err] It maybe SD2.0 But it is Not response to CMD58!\r\n");
goto _exit;
}
if ((response[0] & 0xFE) != 0)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[err] It look CMD58 as illegal command so it is not SD card!\r\n");
result = RT_ERROR;
goto _exit;
}
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
OCR = response[1];
OCR = (OCR << 8) + response[2];
......@@ -822,10 +790,10 @@ static rt_err_t rt_msd_init(rt_device_t dev)
/* try CMD55 + ACMD41 */
do
{
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
if (rt_tick_timeout(tick_start, rt_tick_from_millisecond(CARD_TRY_TIMES_ACMD41)))
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[err] SD Ver2.x or later try CMD55 + ACMD41 timeout!\r\n");
result = RT_ERROR;
goto _exit;
......@@ -836,13 +804,13 @@ static rt_err_t rt_msd_init(rt_device_t dev)
// if((result != RT_EOK) || (response[0] == 0x01))
if (result != RT_EOK)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
continue;
}
if ((response[0] & 0xFE) != 0)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[err] Not SD ready!\r\n");
result = RT_ERROR;
goto _exit;
......@@ -852,7 +820,7 @@ static rt_err_t rt_msd_init(rt_device_t dev)
result = _send_cmd(msd->spi_device, SD_SEND_OP_COND, 0x40000000, 0x77, response_r1, response);
if (result != RT_EOK)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[err] ACMD41 fail!\r\n");
result = RT_ERROR;
goto _exit;
......@@ -860,33 +828,33 @@ static rt_err_t rt_msd_init(rt_device_t dev)
if ((response[0] & 0xFE) != 0)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[info] Not SD card4 , response : 0x%02X\r\n", response[0]);
// break;
}
}
while (response[0] != MSD_RESPONSE_NO_ERROR);
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
/* try CMD55 + ACMD41 */
/* --Read OCR again */
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, READ_OCR, 0x00, 0x00, response_r3, response);
if (result != RT_EOK)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[err] It maybe SD2.0 But it is Not response to 2nd CMD58!\r\n");
goto _exit;
}
if ((response[0] & 0xFE) != 0)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[err] It look 2nd CMD58 as illegal command so it is not SD card!\r\n");
result = RT_ERROR;
goto _exit;
}
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
OCR = response[1];
OCR = (OCR << 8) + response[2];
......@@ -933,14 +901,14 @@ static rt_err_t rt_msd_init(rt_device_t dev)
/* set CRC */
{
MSD_release_cs(msd->spi_device);
MSD_take_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
rt_spi_take(msd->spi_device);
#ifdef MSD_USE_CRC
result = _send_cmd(msd->spi_device, CRC_ON_OFF, 0x01, 0x83, response_r1, response);
#else
result = _send_cmd(msd->spi_device, CRC_ON_OFF, 0x00, 0x91, response_r1, response);
#endif
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
if ((result != RT_EOK) || (response[0] != MSD_RESPONSE_NO_ERROR))
{
MSD_DEBUG("[err] CMD59 CRC_ON_OFF fail! response : 0x%02X\r\n", response[0]);
......@@ -951,10 +919,10 @@ static rt_err_t rt_msd_init(rt_device_t dev)
/* CMD16 SET_BLOCKLEN */
{
MSD_release_cs(msd->spi_device);
MSD_take_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, SET_BLOCKLEN, SECTOR_SIZE, 0x00, response_r1, response);
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
if ((result != RT_EOK) || (response[0] != MSD_RESPONSE_NO_ERROR))
{
MSD_DEBUG("[err] CMD16 SET_BLOCKLEN fail! response : 0x%02X\r\n", response[0]);
......@@ -969,27 +937,27 @@ static rt_err_t rt_msd_init(rt_device_t dev)
{
uint8_t CSD_buffer[MSD_CSD_LEN];
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
// result = _send_cmd(msd->spi_device, SEND_CSD, 0x00, 0xAF, response_r1, response);
result = _send_cmd(msd->spi_device, SEND_CSD, 0x00, 0x00, response_r1, response);
if (result != RT_EOK)
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[err] CMD9 SEND_CSD timeout!\r\n");
goto _exit;
}
if ((result != RT_EOK) || (response[0] != MSD_RESPONSE_NO_ERROR))
{
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
MSD_DEBUG("[err] CMD9 SEND_CSD fail! response : 0x%02X\r\n", response[0]);
result = RT_ERROR;
goto _exit;
}
result = _read_block(msd->spi_device, CSD_buffer, MSD_CSD_LEN);
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
if (result != RT_EOK)
{
MSD_DEBUG("[err] read CSD fail!\r\n");
......@@ -1208,22 +1176,22 @@ static rt_err_t rt_msd_init(rt_device_t dev)
} /* read CSD */
/* Store configuration to msd spi device*/
msd->spi_device->config.data_width = 8;
msd->spi_device->config.mode = RT_SPI_MODE_0 | RT_SPI_MSB;
msd->spi_device->config.max_hz = msd->max_clock;
/* config spi to high speed */
{
struct rt_spi_configuration cfg;
cfg.data_width = 8;
cfg.mode = RT_SPI_MODE_0 | RT_SPI_MSB; /* SPI Compatible Modes 0 */
cfg.max_hz = msd->max_clock;
msd->spi_device->config.data_width = 8;
msd->spi_device->config.mode = RT_SPI_MODE_0 | RT_SPI_MSB;
msd->spi_device->config.max_hz = msd->max_clock;
rt_spi_configure(msd->spi_device, &cfg);
} /* config spi */
_exit:
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
rt_mutex_release(&(msd->spi_device->bus->lock));
return result;
}
......@@ -1256,7 +1224,7 @@ static rt_size_t rt_msd_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_siz
/* SINGLE_BLOCK? */
if (size == 1)
{
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, READ_SINGLE_BLOCK, pos * msd->geometry.bytes_per_sector, 0x00, response_r1, response);
if ((result != RT_EOK) || (response[0] != MSD_RESPONSE_NO_ERROR))
......@@ -1277,7 +1245,7 @@ static rt_size_t rt_msd_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_siz
{
uint32_t i;
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, READ_MULTIPLE_BLOCK, pos * msd->geometry.bytes_per_sector, 0x00, response_r1, response);
if ((result != RT_EOK) || (response[0] != MSD_RESPONSE_NO_ERROR))
......@@ -1310,7 +1278,7 @@ static rt_size_t rt_msd_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_siz
_exit:
/* release and exit */
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
rt_mutex_release(&(msd->spi_device->bus->lock));
return size;
......@@ -1332,7 +1300,7 @@ static rt_size_t rt_msd_sdhc_read(rt_device_t dev, rt_off_t pos, void *buffer, r
/* SINGLE_BLOCK? */
if (size == 1)
{
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, READ_SINGLE_BLOCK, pos, 0x00, response_r1, response);
if ((result != RT_EOK) || (response[0] != MSD_RESPONSE_NO_ERROR))
......@@ -1353,7 +1321,7 @@ static rt_size_t rt_msd_sdhc_read(rt_device_t dev, rt_off_t pos, void *buffer, r
{
uint32_t i;
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, READ_MULTIPLE_BLOCK, pos, 0x00, response_r1, response);
if ((result != RT_EOK) || (response[0] != MSD_RESPONSE_NO_ERROR))
......@@ -1386,7 +1354,7 @@ static rt_size_t rt_msd_sdhc_read(rt_device_t dev, rt_off_t pos, void *buffer, r
_exit:
/* release and exit */
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
rt_mutex_release(&(msd->spi_device->bus->lock));
return size;
......@@ -1410,7 +1378,7 @@ static rt_size_t rt_msd_write(rt_device_t dev, rt_off_t pos, const void *buffer,
/* SINGLE_BLOCK? */
if (size == 1)
{
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, WRITE_BLOCK, pos * msd->geometry.bytes_per_sector, 0x00, response_r1, response);
if ((result != RT_EOK) || (response[0] != MSD_RESPONSE_NO_ERROR))
{
......@@ -1431,7 +1399,7 @@ static rt_size_t rt_msd_write(rt_device_t dev, rt_off_t pos, const void *buffer,
struct rt_spi_message message;
uint32_t i;
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
#ifdef MSD_USE_PRE_ERASED
if (msd->card_type != MSD_CARD_TYPE_MMC)
......@@ -1506,7 +1474,7 @@ static rt_size_t rt_msd_write(rt_device_t dev, rt_off_t pos, const void *buffer,
_exit:
/* release and exit */
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
rt_mutex_release(&(msd->spi_device->bus->lock));
return size;
......@@ -1528,7 +1496,7 @@ static rt_size_t rt_msd_sdhc_write(rt_device_t dev, rt_off_t pos, const void *bu
/* SINGLE_BLOCK? */
if (size == 1)
{
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
result = _send_cmd(msd->spi_device, WRITE_BLOCK, pos, 0x00, response_r1, response);
if ((result != RT_EOK) || (response[0] != MSD_RESPONSE_NO_ERROR))
{
......@@ -1549,7 +1517,7 @@ static rt_size_t rt_msd_sdhc_write(rt_device_t dev, rt_off_t pos, const void *bu
struct rt_spi_message message;
uint32_t i;
MSD_take_cs(msd->spi_device);
rt_spi_take(msd->spi_device);
#ifdef MSD_USE_PRE_ERASED
/* CMD55 APP_CMD */
......@@ -1620,7 +1588,7 @@ static rt_size_t rt_msd_sdhc_write(rt_device_t dev, rt_off_t pos, const void *bu
_exit:
/* release and exit */
MSD_release_cs(msd->spi_device);
rt_spi_release(msd->spi_device);
rt_mutex_release(&(msd->spi_device->bus->lock));
return size;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或