Skip to content

R
rt-thread

lfmiao0 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 7307055b 编写于 作者: qiuyiuestc's avatar qiuyiuestc
浏览文件
操作

delete freemodbus 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@2259 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 056228cc
展开全部 隐藏空白更改
内联 并排
Showing with 0 addition and 5582 deletion
components/net/freemodbus/Changelog.txt 已删除 100644 → 0
浏览文件 @ 056228cc
2007-08-28 (REL_1_4_0) Christian Walter <wolti@sil.at>:
Notes: Added support for HCS08. Fixed some small bugs in the documentation
for the porting layer.
Detailed notes:
- FEATURES (HCS08) : Added new port.
- BUGS (ALL) : Fixed some small bugs in the porting guide.
2007-07-17 (REL_1_3_0) Christian Walter <wolti@sil.at>:
Notes: Added ARM7/AT91SAM7X port. Added Linux/TCP port from Steven Guo.
Detailed notes:
- FEATURES (ARM7): Added ARM7/AT91SAM7x port.
- FEATURES (LINUX): Added Linux/TCP port from Steven Guo.
- BUGS (ALL): Fixed bug in <eMBFuncReadInputRegister> where the high
byte of the register count was ignored. This does not have a
practical impact because the actual number of registers is always
lower.
2007-07-17 (REL_1_3_0) Christian Walter <wolti@sil.at>:
Notes: Added Linux/TCP port. Fixed bug in MSP430 port.
Detailted notes:
- FEATURE (LINUX): Added Linux/TCP port.
- BUGS (MSP430): Fixed bug with calculating the timer value.
2007-04-25 (REL_1_2_0) Christian Walter <wolti@sil.at>:
Notes: Added LPC214X ARM port with Keil compiler. Added Z8Encore port for
Z8F6422 microcontroller.
Detailed notes:
- FEATURE (ARM): Added LPC214X ARM port for Keil ARM 2.41.
- FEATURE (Z8ENCORE): Added Z8F6422 for Z8Encore using the ZDS II - Z8
Encore! development tools.
2007-02-18 (REL_1_1_2) Christian Walter <wolti@sil.at>:
Notes: Fixed typo with the defined defining the supported Modbus
functions. Fixed bug when illegal slave address was passed to eMBInit
where the error was not detected. Fixed typo in the holding registers
where the frame for write multiple registers was parsed with the wrong
constants. The fix is not critical because the values matched. Fixed bug
in discrete input registers implementation where the frame was not parsed
correctly. Added new support for a CodeWarrior Coldfire port.
Detailed notes:
- BUG (ALL): Modbus functions are compiled into the stack conditionally
by changing the MB_FUNC_XXX defines to either true(1) or false(0).
The defines for MB_FUNC_READ_HOLDING and MB_FUNC_WRITE_HOLDING
were wrong.
- BUG (ALL): eMBInit did not correctly check for addresses. Therefore
is was possible to start the Modbus stack with an address of 0
or one > 247.
- BUG (ALL): eMBFuncWriteHoldingRegister should use
MB_PDU_FUNC_WRITE_MUL_ADDR_OFF and not MB_PDU_FUNC_READ_ADDR_OFF.
- BUG (ALL): eMBFuncReadDiscreteInputs calculated the number of discrete
registers to read wrong.
- FEATURE (ALL): Fixed some warnings in the code.
2006-11-19 (REL_1_1_1) Christian Walter <wolti@sil.at>:
Notes: Fixed bug in Read/Write Multiple Registers function where
the registers addresses where calculated wrong.
Fixed bug in RTU and ASCII with the resource allocation in case of
an error.
Changed license to BSD style licsense.
Detailed notes:
- OTHER (ALL): License is now BSD for protocol stack.
- BUG (ALL): The registers address received in a Modbus frame
must be converted to application addresses. The code for this
conversion was missing and therefore has lead to error when
this function was used (Registers of by one, Start at > 1).
- BUG (ALL): If the serial initialization within the porting fails
a timer is still allocated in eMBRTUInit and eMBASCIIInit. This
can lead to a memory leak depending upon the implementation of the
porting layer.
- FEATURE (MCF5235): Added sample shell scripts for testing.
- FEATURE (MSP430): Added sample shell script for testing and
changed default values to match the other ports.
2006-10-30 (REL_1_1_0) Christian Walter <wolti@sil.at>:
Notes: Added support for Read/Write Multiple Registers function
(0x17). Added some tips to reduce memory requirements.
Added MSP430 Port for GCC and Rowley Crossworks.
Detailed notes:
- FEATURE (MSP430): Added new MSP430 port.
- FEATURE (ALL): Added support for Read/Write Multiple Registers
function (0x17). The implementation simply makes two callbacks
to the eMBRegHoldingCB function where first the values are
written and then the other register values are read.
- FEATURE (ALL): Added some tips on reducing memory requirements
with the protocol stack.
2006-10-30 (REL_1_0_5) Christian Walter <wolti@sil.at>:
Notes: eMBDisable and eMBClose can now be called multiple times
which makes shutdown of the protocol stack easier.
Fixed bug in RTU state machine where we switched from the
error state immediately to the idle state. Correct behaviour
would be to wait till the end of frame.
Added new STR71X GCC port which uses only freely available tools
like GNU ARM, OpenOCD (Wiggler) and GDB.
Detailed notes:
- FEATURE (STR71X): Added GCC standalone port which does not
depend on the Rowley Crosswork tools.
- FEATURE (ALL): eMBDisable can now be called multiple times
and returns MB_ENOERR in case is was already disabled.
eMBClose also supports beeing called multiple times in
which pvMBFrameCloseCur( ) is called when the protocol stack
is in state STATE_DISABLED.
- BUG (RTU): Fixed bug in xMBRTUReceiveFSM where the error
state is immediately left because of a missing break. Instead
we should wait till the damaged frame is finished.
2006-10-11 (REL_1_0_4) Christian Walter <wolti@sil.at>:
Notes: Fixed bug when more than 255 coils are requested. Fixed bug in
Linux/Cygwin port when not all bytes could be written by the first
call to write. Added support for removing previously registered
function handlers.
Detailed notes:
- BUG (ALL): mbfunccoils contained a bug which limited the amount
of coils to read to 255.
- BUG (LINUX): prvbMBPortSerialWrite contained a bug in the loop
which writes the RTU/ASCII frame to the serial file descriptor.
If not all bytes where written in the first call or write was
interrupted the sent frame is corrupted.
- FEATURE (ALL): eMBRegisterCB now supports NULL as handler
argument in which case a previously registered function
handler is deregistered from the protocol stack.
2006-09-27 (REL_1_0_3) Christian Walter <wolti@sil.at>:
Notes: Added new functions to support registering of custom callback
handlers. This makes it possible to implement new Modbus function
codes without touching the protocol stack.
New port for ATMega128 added. Thanks to Richard C Sandoz Jr. for
the patches.
Detailed notes:
- FEATURE (ALL): Added support for registering new functions handlers
with eMBRegisterCB.
- FEATURE (AVR): Added patches from Richard C Sandoz Jr. for ATMega128
2006-09-06 (REL_1_0_2) Christian Walter <wolti@sil.at>:
Notes: Fixed bug in FreeRTOS porting layer for STR71X/lwIP target where
memory is not freed in the sys_arch_thread_remove function.
Synched MCF5235TCP port with the FreeRTOS/lwIP port for the STR71X.
Detailed notes:
- BUG (STR71XTCP): Sys_arch_thread_remove did not free the memory from
the TCB.
- BUG (STR71XTCP): Unnecessary call to vTaskSuspendAll removed.
- BUG (STR71XTCP): Bug with counting variable. The first to lwIP tasks
got the same name (lwIP0).
- FEATURE (MCF5235TCP): Enhanced functions from the STR71X/lwIP port
merged into the Coldfire port.
2006-09-04 (REL_1_0_1) Christian Walter <wolti@sil.at>:
Notes: Fixed bug in serial driver for STR71x target when the ring buffer
overflows.
Detailed notes:
- BUG (STR71XTCP): Under high load the ring buffer in the serial driver
functions might overflow. There was an error with counting the number
of received characters which corrupted received frames.
Now receiver correctly recovers in case of dropped bytes.
2006-09-04 (REL_1_0) Christian Walter <wolti@sil.at>:
Notes: Added support for ATmega8, ATmega16, ATmega32, ATmega169 and
RS485 drivers in the AVR support. Special thanks to Tran Minh Hoang
for his contribution.
Added a new lwIP port for the STR71X target which uses one serial
interface for a PPP connection. This can be used for remote Modbus/TCP
devices in combination with a Modem (E.g. GPRS or Analog).
Detailed notes:
- FEATURES (AVR): Integrated patches from Tran Minh Hoang to support the
ATmega8, ATmega16, ATmega32, ATmega169 controllers.
- FEATURES (AVR): Added support for RS485 drivers in the AVR code. The
example supports the DS76176.
- FEATURES (STR71XTCP): implemented function in STR71X/lwIP porting layer
to remove running tasks.
- FEATURES (STR71XTCP): added new thread creation function in STR71X/lwIP
porting layer which allows specifing the stack size.
- BUGS (STR71XTCP): pppOpen defined in ppp.c does not check the return
value of sys_thread_new. If task creation fails the system crashes.
- BUGS (STR71XTCP): pppMain must not return - Instead it should remove
its task from the scheduler.
2006-08-30 (REL_9) Christian Walter <wolti@sil.at>:
Notes: Added lwIP port for the MCF5235 target. The lwIP part is
generic and therefore FreeModbus now works on any target with
lwIP support.
Detailed notes:
- FEATURES: Incoperated MCF5235 FreeRTOS/lwIP port done by the
author in this project.
- FEATURES: Added lwIP port for FreeModbus
- FEATURES: Added demo application for FreeModbus and lwIP.
2006-08-22 (REL_0_82) Christian Walter <wolti@sil.at>
Notes: Fixed bug with Modbus ASCII support
Detailed notes:
- BUG: During the last upgrade an error was introduced in the
initialization code of Modbus ASCII and therefore ASCII
support was broken. The bug is fixed now and was tested with
the Win32 port.
2006-08-22 (REL_0_81) Christian Walter <wolti@sil.at>
Notes: Added porting guide
Detailed notes:
- OTHER: Added a new porting guide to the documentation.
- OTHER: Added a empty example for new ports to the project as a
starting point.
2006-08-01 (REL_0_8) Christian Walter <wolti@sil.at>
Notes: Added Linux RTU/ASCII port.
Detailed notes:
- FEATURES: Added a new Linux RTU/ASCII port. The port should work
on any Linux distribution and it should be possible to run it
on uCLinux.
2006-06-26 (REL_0_7) Christian Walter <wolti@sil.at>
Notes: Changed the WIN32 serial port to better fit into the design.
Detailed notes:
- OTHER: Design of the WIN32 serial port changed. The polling function
for the serial device are now called from the event loop.
- OTHER: Debugging uses the same interface as the WIN32/TCP port.
2006-06-25 Christian Walter <wolti@sil.at>
Notes: Initial work on a Modbus/TCP port is available. The port includes
an example for a Win32 port which uses the Winsock API.
Detailed notes:
- FEATURES: added required functions to core protocol stack to support
a Modbus/TCP implementation.
- FEATURES: added a Win32 port for the Modbus/TCP core. The port is
currently limited to one concurrent client.
- OTHER: The implementation of eMBClose to shutdown the protocol stack
was changed to unify it with the new Modbus/TCP code.
-
2006-06-18 Christian Walter <wolti@sil.at>
Detailed notes:
- OTHER: while working on the Win32 port some line feeds got
wrong. Also some source files used tabs instead of spaces.
- OTHER: prototypes for xMBUtilSetBits and xMBUtilGetBits fixed.
usNBits should be ucNBits by convention.
2006-06-17 Christian Walter <wolti@sil.at>
Notes: Fixed various bugs with the Win32 port
Detailed notes:
- FEATURES: implement shutdown functionality for protocol stack.
- FEATURES: protocol stack can be enabled and disabled during runtime.
- FEATURES: interface functions now do more error checking. For
example if eMBPool is called in an uninitialized state.
- FEATURES: extended Win32 demo application to use the new features.
- BUG: fixed bug in Win32 demo for ASCII mode.
2006-06-16 Christian Walter <wolti@sil.at>
Notes: The new version includes a new port for the
Win32 platform
Detailed notes:
- FEATURES: added Win32 platform
2006-05-14 Christian Walter <wolti@sil.at>
Notes: The new version includes a new port for the
Freescale MCF5235 processor.
Detailed notes:
- FEATURES: added new MCF5235 port.
- OTHER: fixed some missing code headers.
2006-05-01 Christian Walter <wolti@sil.at>
Notes: This version removes the t1.5 timers from the Modbus RTU
implementation because no one actually uses it and the CPU
load is very high. T
In addition some documentation cleanups has been done and the
ARM demo has been updated.
Detailed notes:
- FEATURES: the t1.5 timeout has been removed. Therefore only
one timer is required.
- BUG: the ARM demo project missed some files in the project
workspace and did not compile cleanly
2006-02-28 Christian Walter <wolti@sil.at>
Notes: This version includes support for two new command
(write multiple coils, read discrete input)
Detailed notes:
- BUG: some function used the wrong data types
- FEATURES: added support for write multiple coils function.
- FEATURES: added support for read discrete input.
- OTHER: some code cleanups with lint tool.
2006-02-28 Christian Walter <wolti@sil.at>
Notes: The new version 0.31 adds support for reading and writing the
coil registers and add some bug fixes.
Detailed notes:
- BUG: fixed bug with to small modbus requests being ignored.
- FEATURES: added support for write single coil function.
- FEATURES: added support for working with byte packed bit fields
to support coils and discrete inputs better.
- API: API for set slave id functions changed.
2006-02-26 Christian Walter <wolti@sil.at>
Notes: First public release which includes an ARM and AVR port.
components/net/freemodbus/SConscript 已删除 100644 → 0
浏览文件 @ 056228cc
Import('RTT_ROOT')
from building import *
src = Split("""
modbus/mb.c
modbus/mbmaster.c
modbus/ascii/mbascii.c
modbus/functions/mbfunccoils.c
modbus/functions/mbfuncdiag.c
modbus/functions/mbfuncdisc.c
modbus/functions/mbfuncholding.c
modbus/functions/mbfuncinput.c
modbus/functions/mbfuncother.c
modbus/functions/mbutils.c
modbus/port/demo.c
modbus/port/port.c
modbus/port/portevent.c
modbus/port/portserial.c
modbus/port/porttimer.c
modbus/rtu/mbcrc.c
modbus/rtu/mbrtu.c
modbus/tcp/mbtcp.c
""")
# The set of source files associated with this SConscript file.
path = [RTT_ROOT + '/components/net/freemodbus/modbus/include',
RTT_ROOT + '/components/net/freemodbus/modbus/port',
RTT_ROOT + '/components/net/freemodbus/modbus/rtu',
RTT_ROOT + '/components/net/freemodbus/modbus/ascii']
group = DefineGroup('FreeModbus', src, depend = ['RT_USING_FREEMODBUS'], CPPPATH = path)
Return('group')
components/net/freemodbus/bsd.txt 已删除 100644 → 0
浏览文件 @ 056228cc
Copyright (c) 2006 Christian Walter <wolti@sil.at>
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
components/net/freemodbus/gpl.txt 已删除 100644 → 0
浏览文件 @ 056228cc
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Library General
Public License instead of this License.
components/net/freemodbus/lgpl.txt 已删除 100644 → 0
浏览文件 @ 056228cc
此差异已折叠。
components/net/freemodbus/modbus/ascii/mbascii.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbascii.c,v 1.15 2007/02/18 23:46:48 wolti Exp $
*/
/* ----------------------- System includes ----------------------------------*/
#include "stdlib.h"
#include "string.h"
/* ----------------------- Platform includes --------------------------------*/
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbconfig.h"
#include "mbascii.h"
#include "mbframe.h"
#include "mbcrc.h"
#include "mbport.h"
#if MB_ASCII_ENABLED > 0
/* ----------------------- Defines ------------------------------------------*/
#define MB_ASCII_DEFAULT_CR '\r' /*!< Default CR character for Modbus ASCII. */
#define MB_ASCII_DEFAULT_LF '\n' /*!< Default LF character for Modbus ASCII. */
#define MB_SER_PDU_SIZE_MIN 3 /*!< Minimum size of a Modbus ASCII frame. */
#define MB_SER_PDU_SIZE_MAX 256 /*!< Maximum size of a Modbus ASCII frame. */
#define MB_SER_PDU_SIZE_LRC 1 /*!< Size of LRC field in PDU. */
#define MB_SER_PDU_ADDR_OFF 0 /*!< Offset of slave address in Ser-PDU. */
#define MB_SER_PDU_PDU_OFF 1 /*!< Offset of Modbus-PDU in Ser-PDU. */
/* ----------------------- Type definitions ---------------------------------*/
typedef enum
{
STATE_RX_IDLE, /*!< Receiver is in idle state. */
STATE_RX_RCV, /*!< Frame is beeing received. */
STATE_RX_WAIT_EOF /*!< Wait for End of Frame. */
} eMBRcvState;
typedef enum
{
STATE_TX_IDLE, /*!< Transmitter is in idle state. */
STATE_TX_START, /*!< Starting transmission (':' sent). */
STATE_TX_DATA, /*!< Sending of data (Address, Data, LRC). */
STATE_TX_END, /*!< End of transmission. */
STATE_TX_NOTIFY /*!< Notify sender that the frame has been sent. */
} eMBSndState;
typedef enum
{
BYTE_HIGH_NIBBLE, /*!< Character for high nibble of byte. */
BYTE_LOW_NIBBLE /*!< Character for low nibble of byte. */
} eMBBytePos;
/* ----------------------- Static functions ---------------------------------*/
static UCHAR prvucMBCHAR2BIN( UCHAR ucCharacter );
static UCHAR prvucMBBIN2CHAR( UCHAR ucByte );
static UCHAR prvucMBLRC( UCHAR * pucFrame, USHORT usLen );
/* ----------------------- Static variables ---------------------------------*/
static volatile eMBSndState eSndState;
static volatile eMBRcvState eRcvState;
/* We reuse the Modbus RTU buffer because only one buffer is needed and the
* RTU buffer is bigger. */
extern volatile UCHAR ucRTUBuf[];
static volatile UCHAR *ucASCIIBuf = ucRTUBuf;
static volatile USHORT usRcvBufferPos;
static volatile eMBBytePos eBytePos;
static volatile UCHAR *pucSndBufferCur;
static volatile USHORT usSndBufferCount;
static volatile UCHAR ucLRC;
static volatile UCHAR ucMBLFCharacter;
/* ----------------------- Start implementation -----------------------------*/
eMBErrorCode
eMBASCIIInit( UCHAR ucSlaveAddress, UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity )
{
eMBErrorCode eStatus = MB_ENOERR;
( void )ucSlaveAddress;
ENTER_CRITICAL_SECTION( );
ucMBLFCharacter = MB_ASCII_DEFAULT_LF;
if( xMBPortSerialInit( ucPort, ulBaudRate, 7, eParity ) != TRUE )
{
eStatus = MB_EPORTERR;
}
else if( xMBPortTimersInit( MB_ASCII_TIMEOUT_SEC * 20000UL ) != TRUE )
{
eStatus = MB_EPORTERR;
}
EXIT_CRITICAL_SECTION( );
return eStatus;
}
void
eMBASCIIStart( void )
{
ENTER_CRITICAL_SECTION( );
vMBPortSerialEnable( TRUE, FALSE );
eRcvState = STATE_RX_IDLE;
EXIT_CRITICAL_SECTION( );
/* No special startup required for ASCII. */
( void )xMBPortEventPost( EV_READY );
}
void
eMBASCIIStop( void )
{
ENTER_CRITICAL_SECTION( );
vMBPortSerialEnable( FALSE, FALSE );
vMBPortTimersDisable( );
EXIT_CRITICAL_SECTION( );
}
eMBErrorCode
eMBASCIIReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame, USHORT * pusLength )
{
eMBErrorCode eStatus = MB_ENOERR;
ENTER_CRITICAL_SECTION( );
assert( usRcvBufferPos < MB_SER_PDU_SIZE_MAX );
/* Length and CRC check */
if( ( usRcvBufferPos >= MB_SER_PDU_SIZE_MIN )
&& ( prvucMBLRC( ( UCHAR * ) ucASCIIBuf, usRcvBufferPos ) == 0 ) )
{
/* Save the address field. All frames are passed to the upper layed
* and the decision if a frame is used is done there.
*/
*pucRcvAddress = ucASCIIBuf[MB_SER_PDU_ADDR_OFF];
/* Total length of Modbus-PDU is Modbus-Serial-Line-PDU minus
* size of address field and CRC checksum.
*/
*pusLength = ( USHORT )( usRcvBufferPos - MB_SER_PDU_PDU_OFF - MB_SER_PDU_SIZE_LRC );
/* Return the start of the Modbus PDU to the caller. */
*pucFrame = ( UCHAR * ) & ucASCIIBuf[MB_SER_PDU_PDU_OFF];
}
else
{
eStatus = MB_EIO;
}
EXIT_CRITICAL_SECTION( );
return eStatus;
}
eMBErrorCode
eMBASCIISend( UCHAR ucSlaveAddress, const UCHAR * pucFrame, USHORT usLength )
{
eMBErrorCode eStatus = MB_ENOERR;
UCHAR usLRC;
ENTER_CRITICAL_SECTION( );
/* Check if the receiver is still in idle state. If not we where to
* slow with processing the received frame and the master sent another
* frame on the network. We have to abort sending the frame.
*/
if( eRcvState == STATE_RX_IDLE )
{
/* First byte before the Modbus-PDU is the slave address. */
pucSndBufferCur = ( UCHAR * ) pucFrame - 1;
usSndBufferCount = 1;
/* Now copy the Modbus-PDU into the Modbus-Serial-Line-PDU. */
pucSndBufferCur[MB_SER_PDU_ADDR_OFF] = ucSlaveAddress;
usSndBufferCount += usLength;
/* Calculate LRC checksum for Modbus-Serial-Line-PDU. */
usLRC = prvucMBLRC( ( UCHAR * ) pucSndBufferCur, usSndBufferCount );
ucASCIIBuf[usSndBufferCount++] = usLRC;
/* Activate the transmitter. */
eSndState = STATE_TX_START;
vMBPortSerialEnable( FALSE, TRUE );
}
else
{
eStatus = MB_EIO;
}
EXIT_CRITICAL_SECTION( );
return eStatus;
}
BOOL
xMBASCIIReceiveFSM( void )
{
BOOL xNeedPoll = FALSE;
UCHAR ucByte;
UCHAR ucResult;
assert( eSndState == STATE_TX_IDLE );
( void )xMBPortSerialGetByte( ( CHAR * ) & ucByte );
switch ( eRcvState )
{
/* A new character is received. If the character is a ':' the input
* buffer is cleared. A CR-character signals the end of the data
* block. Other characters are part of the data block and their
* ASCII value is converted back to a binary representation.
*/
case STATE_RX_RCV:
/* Enable timer for character timeout. */
vMBPortTimersEnable( );
if( ucByte == ':' )
{
/* Empty receive buffer. */
eBytePos = BYTE_HIGH_NIBBLE;
usRcvBufferPos = 0;
}
else if( ucByte == MB_ASCII_DEFAULT_CR )
{
eRcvState = STATE_RX_WAIT_EOF;
}
else
{
ucResult = prvucMBCHAR2BIN( ucByte );
switch ( eBytePos )
{
/* High nibble of the byte comes first. We check for
* a buffer overflow here. */
case BYTE_HIGH_NIBBLE:
if( usRcvBufferPos < MB_SER_PDU_SIZE_MAX )
{
ucASCIIBuf[usRcvBufferPos] = ( UCHAR )( ucResult << 4 );
eBytePos = BYTE_LOW_NIBBLE;
break;
}
else
{
/* not handled in Modbus specification but seems
* a resonable implementation. */
eRcvState = STATE_RX_IDLE;
/* Disable previously activated timer because of error state. */
vMBPortTimersDisable( );
}
break;
case BYTE_LOW_NIBBLE:
ucASCIIBuf[usRcvBufferPos++] |= ucResult;
eBytePos = BYTE_HIGH_NIBBLE;
break;
}
}
break;
case STATE_RX_WAIT_EOF:
if( ucByte == ucMBLFCharacter )
{
/* Disable character timeout timer because all characters are
* received. */
vMBPortTimersDisable( );
/* Receiver is again in idle state. */
eRcvState = STATE_RX_IDLE;
/* Notify the caller of eMBASCIIReceive that a new frame
* was received. */
xNeedPoll = xMBPortEventPost( EV_FRAME_RECEIVED );
}
else if( ucByte == ':' )
{
/* Empty receive buffer and back to receive state. */
eBytePos = BYTE_HIGH_NIBBLE;
usRcvBufferPos = 0;
eRcvState = STATE_RX_RCV;
/* Enable timer for character timeout. */
vMBPortTimersEnable( );
}
else
{
/* Frame is not okay. Delete entire frame. */
eRcvState = STATE_RX_IDLE;
}
break;
case STATE_RX_IDLE:
if( ucByte == ':' )
{
/* Enable timer for character timeout. */
vMBPortTimersEnable( );
/* Reset the input buffers to store the frame. */
usRcvBufferPos = 0;;
eBytePos = BYTE_HIGH_NIBBLE;
eRcvState = STATE_RX_RCV;
}
break;
}
return xNeedPoll;
}
BOOL
xMBASCIITransmitFSM( void )
{
BOOL xNeedPoll = FALSE;
UCHAR ucByte;
assert( eRcvState == STATE_RX_IDLE );
switch ( eSndState )
{
/* Start of transmission. The start of a frame is defined by sending
* the character ':'. */
case STATE_TX_START:
ucByte = ':';
xMBPortSerialPutByte( ( CHAR )ucByte );
eSndState = STATE_TX_DATA;
eBytePos = BYTE_HIGH_NIBBLE;
break;
/* Send the data block. Each data byte is encoded as a character hex
* stream with the high nibble sent first and the low nibble sent
* last. If all data bytes are exhausted we send a '\r' character
* to end the transmission. */
case STATE_TX_DATA:
if( usSndBufferCount > 0 )
{
switch ( eBytePos )
{
case BYTE_HIGH_NIBBLE:
ucByte = prvucMBBIN2CHAR( ( UCHAR )( *pucSndBufferCur >> 4 ) );
xMBPortSerialPutByte( ( CHAR ) ucByte );
eBytePos = BYTE_LOW_NIBBLE;
break;
case BYTE_LOW_NIBBLE:
ucByte = prvucMBBIN2CHAR( ( UCHAR )( *pucSndBufferCur & 0x0F ) );
xMBPortSerialPutByte( ( CHAR )ucByte );
pucSndBufferCur++;
eBytePos = BYTE_HIGH_NIBBLE;
usSndBufferCount--;
break;
}
}
else
{
xMBPortSerialPutByte( MB_ASCII_DEFAULT_CR );
eSndState = STATE_TX_END;
}
break;
/* Finish the frame by sending a LF character. */
case STATE_TX_END:
xMBPortSerialPutByte( ( CHAR )ucMBLFCharacter );
/* We need another state to make sure that the CR character has
* been sent. */
eSndState = STATE_TX_NOTIFY;
break;
/* Notify the task which called eMBASCIISend that the frame has
* been sent. */
case STATE_TX_NOTIFY:
eSndState = STATE_TX_IDLE;
xNeedPoll = xMBPortEventPost( EV_FRAME_SENT );
/* Disable transmitter. This prevents another transmit buffer
* empty interrupt. */
vMBPortSerialEnable( TRUE, FALSE );
eSndState = STATE_TX_IDLE;
break;
/* We should not get a transmitter event if the transmitter is in
* idle state. */
case STATE_TX_IDLE:
/* enable receiver/disable transmitter. */
vMBPortSerialEnable( TRUE, FALSE );
break;
}
return xNeedPoll;
}
BOOL
xMBASCIITimerT1SExpired( void )
{
switch ( eRcvState )
{
/* If we have a timeout we go back to the idle state and wait for
* the next frame.
*/
case STATE_RX_RCV:
case STATE_RX_WAIT_EOF:
eRcvState = STATE_RX_IDLE;
break;
default:
assert( ( eRcvState == STATE_RX_RCV ) || ( eRcvState == STATE_RX_WAIT_EOF ) );
break;
}
vMBPortTimersDisable( );
/* no context switch required. */
return FALSE;
}
static UCHAR
prvucMBCHAR2BIN( UCHAR ucCharacter )
{
if( ( ucCharacter >= '0' ) && ( ucCharacter <= '9' ) )
{
return ( UCHAR )( ucCharacter - '0' );
}
else if( ( ucCharacter >= 'A' ) && ( ucCharacter <= 'F' ) )
{
return ( UCHAR )( ucCharacter - 'A' + 0x0A );
}
else
{
return 0xFF;
}
}
static UCHAR
prvucMBBIN2CHAR( UCHAR ucByte )
{
if( ucByte <= 0x09 )
{
return ( UCHAR )( '0' + ucByte );
}
else if( ( ucByte >= 0x0A ) && ( ucByte <= 0x0F ) )
{
return ( UCHAR )( ucByte - 0x0A + 'A' );
}
else
{
/* Programming error. */
assert( 0 );
}
return '0';
}
static UCHAR
prvucMBLRC( UCHAR * pucFrame, USHORT usLen )
{
UCHAR ucLRC = 0; /* LRC char initialized */
while( usLen-- )
{
ucLRC += *pucFrame++; /* Add buffer byte without carry */
}
/* Return twos complement */
ucLRC = ( UCHAR ) ( -( ( CHAR ) ucLRC ) );
return ucLRC;
}
#endif
components/net/freemodbus/modbus/ascii/mbascii.h 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbascii.h,v 1.8 2006/12/07 22:10:34 wolti Exp $
*/
#ifndef _MB_ASCII_H
#define _MB_ASCII_H
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif
#if MB_ASCII_ENABLED > 0
eMBErrorCode eMBASCIIInit( UCHAR slaveAddress, UCHAR ucPort,
ULONG ulBaudRate, eMBParity eParity );
void eMBASCIIStart( void );
void eMBASCIIStop( void );
eMBErrorCode eMBASCIIReceive( UCHAR * pucRcvAddress, UCHAR ** pucFrame,
USHORT * pusLength );
eMBErrorCode eMBASCIISend( UCHAR slaveAddress, const UCHAR * pucFrame,
USHORT usLength );
BOOL xMBASCIIReceiveFSM( void );
BOOL xMBASCIITransmitFSM( void );
BOOL xMBASCIITimerT1SExpired( void );
#endif
#ifdef __cplusplus
PR_END_EXTERN_C
#endif
#endif
components/net/freemodbus/modbus/functions/mbfunccoils.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbfunccoils.c,v 1.8 2007/02/18 23:47:16 wolti Exp $
*/
/* ----------------------- System includes ----------------------------------*/
#include "stdlib.h"
#include "string.h"
/* ----------------------- Platform includes --------------------------------*/
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbframe.h"
#include "mbproto.h"
#include "mbconfig.h"
/* ----------------------- Defines ------------------------------------------*/
#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF )
#define MB_PDU_FUNC_READ_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_FUNC_READ_SIZE ( 4 )
#define MB_PDU_FUNC_READ_COILCNT_MAX ( 0x07D0 )
#define MB_PDU_FUNC_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF )
#define MB_PDU_FUNC_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_FUNC_WRITE_SIZE ( 4 )
#define MB_PDU_FUNC_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF )
#define MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF ( MB_PDU_DATA_OFF + 4 )
#define MB_PDU_FUNC_WRITE_MUL_VALUES_OFF ( MB_PDU_DATA_OFF + 5 )
#define MB_PDU_FUNC_WRITE_MUL_SIZE_MIN ( 5 )
#define MB_PDU_FUNC_WRITE_MUL_COILCNT_MAX ( 0x07B0 )
/* ----------------------- Static functions ---------------------------------*/
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
/* ----------------------- Start implementation -----------------------------*/
#if MB_FUNC_READ_COILS_ENABLED > 0
eMBException
eMBFuncReadCoils( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
USHORT usCoilCount;
UCHAR ucNBytes;
UCHAR *pucFrameCur;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
usRegAddress++;
usCoilCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_COILCNT_OFF] << 8 );
usCoilCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_COILCNT_OFF + 1] );
/* Check if the number of registers to read is valid. If not
* return Modbus illegal data value exception.
*/
if( ( usCoilCount >= 1 ) &&
( usCoilCount < MB_PDU_FUNC_READ_COILCNT_MAX ) )
{
/* Set the current PDU data pointer to the beginning. */
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
*usLen = MB_PDU_FUNC_OFF;
/* First byte contains the function code. */
*pucFrameCur++ = MB_FUNC_READ_COILS;
*usLen += 1;
/* Test if the quantity of coils is a multiple of 8. If not last
* byte is only partially field with unused coils set to zero. */
if( ( usCoilCount & 0x0007 ) != 0 )
{
ucNBytes = ( UCHAR )( usCoilCount / 8 + 1 );
}
else
{
ucNBytes = ( UCHAR )( usCoilCount / 8 );
}
*pucFrameCur++ = ucNBytes;
*usLen += 1;
eRegStatus =
eMBRegCoilsCB( pucFrameCur, usRegAddress, usCoilCount,
MB_REG_READ );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
else
{
/* The response contains the function code, the starting address
* and the quantity of registers. We reuse the old values in the
* buffer because they are still valid. */
*usLen += ucNBytes;;
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid read coil register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
#if MB_FUNC_WRITE_COIL_ENABLED > 0
eMBException
eMBFuncWriteCoil( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
UCHAR ucBuf[2];
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen == ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
usRegAddress++;
if( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF + 1] == 0x00 ) &&
( ( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF ) ||
( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0x00 ) ) )
{
ucBuf[1] = 0;
if( pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF] == 0xFF )
{
ucBuf[0] = 1;
}
else
{
ucBuf[0] = 0;
}
eRegStatus =
eMBRegCoilsCB( &ucBuf[0], usRegAddress, 1, MB_REG_WRITE );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid write coil register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
#endif
#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
eMBException
eMBFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
USHORT usCoilCnt;
UCHAR ucByteCount;
UCHAR ucByteCountVerify;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen > ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
usRegAddress++;
usCoilCnt = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF] << 8 );
usCoilCnt |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_COILCNT_OFF + 1] );
ucByteCount = pucFrame[MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF];
/* Compute the number of expected bytes in the request. */
if( ( usCoilCnt & 0x0007 ) != 0 )
{
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 + 1 );
}
else
{
ucByteCountVerify = ( UCHAR )( usCoilCnt / 8 );
}
if( ( usCoilCnt >= 1 ) &&
( usCoilCnt <= MB_PDU_FUNC_WRITE_MUL_COILCNT_MAX ) &&
( ucByteCountVerify == ucByteCount ) )
{
eRegStatus =
eMBRegCoilsCB( &pucFrame[MB_PDU_FUNC_WRITE_MUL_VALUES_OFF],
usRegAddress, usCoilCnt, MB_REG_WRITE );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
else
{
/* The response contains the function code, the starting address
* and the quantity of registers. We reuse the old values in the
* buffer because they are still valid. */
*usLen = MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF;
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid write coil register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
#endif
#endif
components/net/freemodbus/modbus/functions/mbfuncdiag.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbfuncdiag.c,v 1.3 2006/12/07 22:10:34 wolti Exp $
*/
components/net/freemodbus/modbus/functions/mbfuncdisc.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeRTOS Modbus Libary: A Modbus serial implementation for FreeRTOS
* Copyright (C) 2006 Christian Walter <wolti@sil.at>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* ----------------------- System includes ----------------------------------*/
#include "stdlib.h"
#include "string.h"
/* ----------------------- Platform includes --------------------------------*/
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbframe.h"
#include "mbproto.h"
#include "mbconfig.h"
/* ----------------------- Defines ------------------------------------------*/
#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF )
#define MB_PDU_FUNC_READ_DISCCNT_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_FUNC_READ_SIZE ( 4 )
#define MB_PDU_FUNC_READ_DISCCNT_MAX ( 0x07D0 )
/* ----------------------- Static functions ---------------------------------*/
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
/* ----------------------- Start implementation -----------------------------*/
#if MB_FUNC_READ_COILS_ENABLED > 0
eMBException
eMBFuncReadDiscreteInputs( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
USHORT usDiscreteCnt;
UCHAR ucNBytes;
UCHAR *pucFrameCur;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
usRegAddress++;
usDiscreteCnt = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_DISCCNT_OFF] << 8 );
usDiscreteCnt |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_DISCCNT_OFF + 1] );
/* Check if the number of registers to read is valid. If not
* return Modbus illegal data value exception.
*/
if( ( usDiscreteCnt >= 1 ) &&
( usDiscreteCnt < MB_PDU_FUNC_READ_DISCCNT_MAX ) )
{
/* Set the current PDU data pointer to the beginning. */
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
*usLen = MB_PDU_FUNC_OFF;
/* First byte contains the function code. */
*pucFrameCur++ = MB_FUNC_READ_DISCRETE_INPUTS;
*usLen += 1;
/* Test if the quantity of coils is a multiple of 8. If not last
* byte is only partially field with unused coils set to zero. */
if( ( usDiscreteCnt & 0x0007 ) != 0 )
{
ucNBytes = ( UCHAR ) ( usDiscreteCnt / 8 + 1 );
}
else
{
ucNBytes = ( UCHAR ) ( usDiscreteCnt / 8 );
}
*pucFrameCur++ = ucNBytes;
*usLen += 1;
eRegStatus =
eMBRegDiscreteCB( pucFrameCur, usRegAddress, usDiscreteCnt );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
else
{
/* The response contains the function code, the starting address
* and the quantity of registers. We reuse the old values in the
* buffer because they are still valid. */
*usLen += ucNBytes;;
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid read coil register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
#endif
components/net/freemodbus/modbus/functions/mbfuncholding.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbfuncholding.c,v 1.12 2007/02/18 23:48:22 wolti Exp $
*/
/* ----------------------- System includes ----------------------------------*/
#include "stdlib.h"
#include "string.h"
/* ----------------------- Platform includes --------------------------------*/
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbframe.h"
#include "mbproto.h"
#include "mbconfig.h"
/* ----------------------- Defines ------------------------------------------*/
#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0)
#define MB_PDU_FUNC_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_FUNC_READ_SIZE ( 4 )
#define MB_PDU_FUNC_READ_REGCNT_MAX ( 0x007D )
#define MB_PDU_FUNC_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 0)
#define MB_PDU_FUNC_WRITE_VALUE_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_FUNC_WRITE_SIZE ( 4 )
#define MB_PDU_FUNC_WRITE_MUL_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
#define MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF ( MB_PDU_DATA_OFF + 4 )
#define MB_PDU_FUNC_WRITE_MUL_VALUES_OFF ( MB_PDU_DATA_OFF + 5 )
#define MB_PDU_FUNC_WRITE_MUL_SIZE_MIN ( 5 )
#define MB_PDU_FUNC_WRITE_MUL_REGCNT_MAX ( 0x0078 )
#define MB_PDU_FUNC_READWRITE_READ_ADDR_OFF ( MB_PDU_DATA_OFF + 0 )
#define MB_PDU_FUNC_READWRITE_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_FUNC_READWRITE_WRITE_ADDR_OFF ( MB_PDU_DATA_OFF + 4 )
#define MB_PDU_FUNC_READWRITE_WRITE_REGCNT_OFF ( MB_PDU_DATA_OFF + 6 )
#define MB_PDU_FUNC_READWRITE_BYTECNT_OFF ( MB_PDU_DATA_OFF + 8 )
#define MB_PDU_FUNC_READWRITE_WRITE_VALUES_OFF ( MB_PDU_DATA_OFF + 9 )
#define MB_PDU_FUNC_READWRITE_SIZE_MIN ( 9 )
/* ----------------------- Static functions ---------------------------------*/
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
/* ----------------------- Start implementation -----------------------------*/
#if MB_FUNC_WRITE_HOLDING_ENABLED > 0
eMBException
eMBFuncWriteHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen == ( MB_PDU_FUNC_WRITE_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_ADDR_OFF + 1] );
usRegAddress++;
/* Make callback to update the value. */
eRegStatus = eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_WRITE_VALUE_OFF],
usRegAddress, 1, MB_REG_WRITE );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
}
else
{
/* Can't be a valid request because the length is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
#endif
#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
eMBException
eMBFuncWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
USHORT usRegCount;
UCHAR ucRegByteCount;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen >= ( MB_PDU_FUNC_WRITE_MUL_SIZE_MIN + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_ADDR_OFF + 1] );
usRegAddress++;
usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF] << 8 );
usRegCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_WRITE_MUL_REGCNT_OFF + 1] );
ucRegByteCount = pucFrame[MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF];
if( ( usRegCount >= 1 ) &&
( usRegCount <= MB_PDU_FUNC_WRITE_MUL_REGCNT_MAX ) &&
( ucRegByteCount == ( UCHAR ) ( 2 * usRegCount ) ) )
{
/* Make callback to update the register values. */
eRegStatus =
eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_WRITE_MUL_VALUES_OFF],
usRegAddress, usRegCount, MB_REG_WRITE );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
else
{
/* The response contains the function code, the starting
* address and the quantity of registers. We reuse the
* old values in the buffer because they are still valid.
*/
*usLen = MB_PDU_FUNC_WRITE_MUL_BYTECNT_OFF;
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid request because the length is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
#endif
#if MB_FUNC_READ_HOLDING_ENABLED > 0
eMBException
eMBFuncReadHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
USHORT usRegCount;
UCHAR *pucFrameCur;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
usRegAddress++;
usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF] << 8 );
usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF + 1] );
/* Check if the number of registers to read is valid. If not
* return Modbus illegal data value exception.
*/
if( ( usRegCount >= 1 ) && ( usRegCount <= MB_PDU_FUNC_READ_REGCNT_MAX ) )
{
/* Set the current PDU data pointer to the beginning. */
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
*usLen = MB_PDU_FUNC_OFF;
/* First byte contains the function code. */
*pucFrameCur++ = MB_FUNC_READ_HOLDING_REGISTER;
*usLen += 1;
/* Second byte in the response contain the number of bytes. */
*pucFrameCur++ = ( UCHAR ) ( usRegCount * 2 );
*usLen += 1;
/* Make callback to fill the buffer. */
eRegStatus = eMBRegHoldingCB( pucFrameCur, usRegAddress, usRegCount, MB_REG_READ );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
else
{
*usLen += usRegCount * 2;
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid request because the length is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
#endif
#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
eMBException
eMBFuncReadWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegReadAddress;
USHORT usRegReadCount;
USHORT usRegWriteAddress;
USHORT usRegWriteCount;
UCHAR ucRegWriteByteCount;
UCHAR *pucFrameCur;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen >= ( MB_PDU_FUNC_READWRITE_SIZE_MIN + MB_PDU_SIZE_MIN ) )
{
usRegReadAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_ADDR_OFF] << 8U );
usRegReadAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_ADDR_OFF + 1] );
usRegReadAddress++;
usRegReadCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_REGCNT_OFF] << 8U );
usRegReadCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_READ_REGCNT_OFF + 1] );
usRegWriteAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_ADDR_OFF] << 8U );
usRegWriteAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_ADDR_OFF + 1] );
usRegWriteAddress++;
usRegWriteCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_REGCNT_OFF] << 8U );
usRegWriteCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READWRITE_WRITE_REGCNT_OFF + 1] );
ucRegWriteByteCount = pucFrame[MB_PDU_FUNC_READWRITE_BYTECNT_OFF];
if( ( usRegReadCount >= 1 ) && ( usRegReadCount <= 0x7D ) &&
( usRegWriteCount >= 1 ) && ( usRegWriteCount <= 0x79 ) &&
( ( 2 * usRegWriteCount ) == ucRegWriteByteCount ) )
{
/* Make callback to update the register values. */
eRegStatus = eMBRegHoldingCB( &pucFrame[MB_PDU_FUNC_READWRITE_WRITE_VALUES_OFF],
usRegWriteAddress, usRegWriteCount, MB_REG_WRITE );
if( eRegStatus == MB_ENOERR )
{
/* Set the current PDU data pointer to the beginning. */
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
*usLen = MB_PDU_FUNC_OFF;
/* First byte contains the function code. */
*pucFrameCur++ = MB_FUNC_READWRITE_MULTIPLE_REGISTERS;
*usLen += 1;
/* Second byte in the response contain the number of bytes. */
*pucFrameCur++ = ( UCHAR ) ( usRegReadCount * 2 );
*usLen += 1;
/* Make the read callback. */
eRegStatus =
eMBRegHoldingCB( pucFrameCur, usRegReadAddress, usRegReadCount, MB_REG_READ );
if( eRegStatus == MB_ENOERR )
{
*usLen += 2 * usRegReadCount;
}
}
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
return eStatus;
}
#endif
components/net/freemodbus/modbus/functions/mbfuncinput.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbfuncinput.c,v 1.10 2007/09/12 10:15:56 wolti Exp $
*/
/* ----------------------- System includes ----------------------------------*/
#include "stdlib.h"
#include "string.h"
/* ----------------------- Platform includes --------------------------------*/
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbframe.h"
#include "mbproto.h"
#include "mbconfig.h"
/* ----------------------- Defines ------------------------------------------*/
#define MB_PDU_FUNC_READ_ADDR_OFF ( MB_PDU_DATA_OFF )
#define MB_PDU_FUNC_READ_REGCNT_OFF ( MB_PDU_DATA_OFF + 2 )
#define MB_PDU_FUNC_READ_SIZE ( 4 )
#define MB_PDU_FUNC_READ_REGCNT_MAX ( 0x007D )
#define MB_PDU_FUNC_READ_RSP_BYTECNT_OFF ( MB_PDU_DATA_OFF )
/* ----------------------- Static functions ---------------------------------*/
eMBException prveMBError2Exception( eMBErrorCode eErrorCode );
/* ----------------------- Start implementation -----------------------------*/
#if MB_FUNC_READ_INPUT_ENABLED > 0
eMBException
eMBFuncReadInputRegister( UCHAR * pucFrame, USHORT * usLen )
{
USHORT usRegAddress;
USHORT usRegCount;
UCHAR *pucFrameCur;
eMBException eStatus = MB_EX_NONE;
eMBErrorCode eRegStatus;
if( *usLen == ( MB_PDU_FUNC_READ_SIZE + MB_PDU_SIZE_MIN ) )
{
usRegAddress = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF] << 8 );
usRegAddress |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_ADDR_OFF + 1] );
usRegAddress++;
usRegCount = ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF] << 8 );
usRegCount |= ( USHORT )( pucFrame[MB_PDU_FUNC_READ_REGCNT_OFF + 1] );
/* Check if the number of registers to read is valid. If not
* return Modbus illegal data value exception.
*/
if( ( usRegCount >= 1 )
&& ( usRegCount < MB_PDU_FUNC_READ_REGCNT_MAX ) )
{
/* Set the current PDU data pointer to the beginning. */
pucFrameCur = &pucFrame[MB_PDU_FUNC_OFF];
*usLen = MB_PDU_FUNC_OFF;
/* First byte contains the function code. */
*pucFrameCur++ = MB_FUNC_READ_INPUT_REGISTER;
*usLen += 1;
/* Second byte in the response contain the number of bytes. */
*pucFrameCur++ = ( UCHAR )( usRegCount * 2 );
*usLen += 1;
eRegStatus =
eMBRegInputCB( pucFrameCur, usRegAddress, usRegCount );
/* If an error occured convert it into a Modbus exception. */
if( eRegStatus != MB_ENOERR )
{
eStatus = prveMBError2Exception( eRegStatus );
}
else
{
*usLen += usRegCount * 2;
}
}
else
{
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
}
else
{
/* Can't be a valid read input register request because the length
* is incorrect. */
eStatus = MB_EX_ILLEGAL_DATA_VALUE;
}
return eStatus;
}
#endif
components/net/freemodbus/modbus/functions/mbfuncother.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbfuncother.c,v 1.8 2006/12/07 22:10:34 wolti Exp $
*/
/* ----------------------- System includes ----------------------------------*/
#include "stdlib.h"
#include "string.h"
/* ----------------------- Platform includes --------------------------------*/
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbframe.h"
#include "mbproto.h"
#include "mbconfig.h"
#if MB_FUNC_OTHER_REP_SLAVEID_ENABLED > 0
/* ----------------------- Static variables ---------------------------------*/
static UCHAR ucMBSlaveID[MB_FUNC_OTHER_REP_SLAVEID_BUF];
static USHORT usMBSlaveIDLen;
/* ----------------------- Start implementation -----------------------------*/
eMBErrorCode
eMBSetSlaveID( UCHAR ucSlaveID, BOOL xIsRunning,
UCHAR const *pucAdditional, USHORT usAdditionalLen )
{
eMBErrorCode eStatus = MB_ENOERR;
/* the first byte and second byte in the buffer is reserved for
* the parameter ucSlaveID and the running flag. The rest of
* the buffer is available for additional data. */
if( usAdditionalLen + 2 < MB_FUNC_OTHER_REP_SLAVEID_BUF )
{
usMBSlaveIDLen = 0;
ucMBSlaveID[usMBSlaveIDLen++] = ucSlaveID;
ucMBSlaveID[usMBSlaveIDLen++] = ( UCHAR )( xIsRunning ? 0xFF : 0x00 );
if( usAdditionalLen > 0 )
{
memcpy( &ucMBSlaveID[usMBSlaveIDLen], pucAdditional,
( size_t )usAdditionalLen );
usMBSlaveIDLen += usAdditionalLen;
}
}
else
{
eStatus = MB_ENORES;
}
return eStatus;
}
eMBException
eMBFuncReportSlaveID( UCHAR * pucFrame, USHORT * usLen )
{
memcpy( &pucFrame[MB_PDU_DATA_OFF], &ucMBSlaveID[0], ( size_t )usMBSlaveIDLen );
*usLen = ( USHORT )( MB_PDU_DATA_OFF + usMBSlaveIDLen );
return MB_EX_NONE;
}
#endif
components/net/freemodbus/modbus/functions/mbutils.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbutils.c,v 1.6 2007/02/18 23:49:07 wolti Exp $
*/
/* ----------------------- System includes ----------------------------------*/
#include "stdlib.h"
#include "string.h"
/* ----------------------- Platform includes --------------------------------*/
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbproto.h"
/* ----------------------- Defines ------------------------------------------*/
#define BITS_UCHAR 8U
/* ----------------------- Start implementation -----------------------------*/
void
xMBUtilSetBits( UCHAR * ucByteBuf, USHORT usBitOffset, UCHAR ucNBits,
UCHAR ucValue )
{
USHORT usWordBuf;
USHORT usMask;
USHORT usByteOffset;
USHORT usNPreBits;
USHORT usValue = ucValue;
assert( ucNBits <= 8 );
assert( ( size_t )BITS_UCHAR == sizeof( UCHAR ) * 8 );
/* Calculate byte offset for first byte containing the bit values starting
* at usBitOffset. */
usByteOffset = ( USHORT )( ( usBitOffset ) / BITS_UCHAR );
/* How many bits precede our bits to set. */
usNPreBits = ( USHORT )( usBitOffset - usByteOffset * BITS_UCHAR );
/* Move bit field into position over bits to set */
usValue <<= usNPreBits;
/* Prepare a mask for setting the new bits. */
usMask = ( USHORT )( ( 1 << ( USHORT ) ucNBits ) - 1 );
usMask <<= usBitOffset - usByteOffset * BITS_UCHAR;
/* copy bits into temporary storage. */
usWordBuf = ucByteBuf[usByteOffset];
usWordBuf |= ucByteBuf[usByteOffset + 1] << BITS_UCHAR;
/* Zero out bit field bits and then or value bits into them. */
usWordBuf = ( USHORT )( ( usWordBuf & ( ~usMask ) ) | usValue );
/* move bits back into storage */
ucByteBuf[usByteOffset] = ( UCHAR )( usWordBuf & 0xFF );
ucByteBuf[usByteOffset + 1] = ( UCHAR )( usWordBuf >> BITS_UCHAR );
}
UCHAR
xMBUtilGetBits( UCHAR * ucByteBuf, USHORT usBitOffset, UCHAR ucNBits )
{
USHORT usWordBuf;
USHORT usMask;
USHORT usByteOffset;
USHORT usNPreBits;
/* Calculate byte offset for first byte containing the bit values starting
* at usBitOffset. */
usByteOffset = ( USHORT )( ( usBitOffset ) / BITS_UCHAR );
/* How many bits precede our bits to set. */
usNPreBits = ( USHORT )( usBitOffset - usByteOffset * BITS_UCHAR );
/* Prepare a mask for setting the new bits. */
usMask = ( USHORT )( ( 1 << ( USHORT ) ucNBits ) - 1 );
/* copy bits into temporary storage. */
usWordBuf = ucByteBuf[usByteOffset];
usWordBuf |= ucByteBuf[usByteOffset + 1] << BITS_UCHAR;
/* throw away unneeded bits. */
usWordBuf >>= usNPreBits;
/* mask away bits above the requested bitfield. */
usWordBuf &= usMask;
return ( UCHAR ) usWordBuf;
}
eMBException
prveMBError2Exception( eMBErrorCode eErrorCode )
{
eMBException eStatus;
switch ( eErrorCode )
{
case MB_ENOERR:
eStatus = MB_EX_NONE;
break;
case MB_ENOREG:
eStatus = MB_EX_ILLEGAL_DATA_ADDRESS;
break;
case MB_ETIMEDOUT:
eStatus = MB_EX_SLAVE_BUSY;
break;
default:
eStatus = MB_EX_SLAVE_DEVICE_FAILURE;
break;
}
return eStatus;
}
components/net/freemodbus/modbus/include/mb.h 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mb.h,v 1.17 2006/12/07 22:10:34 wolti Exp $
*/
#ifndef _MB_H
#define _MB_H
#include "port.h"
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif
#include "mbport.h"
#include "mbproto.h"
/*! \defgroup modbus Modbus
* \code #include "mb.h" \endcode
*
* This module defines the interface for the application. It contains
* the basic functions and types required to use the Modbus protocol stack.
* A typical application will want to call eMBInit() first. If the device
* is ready to answer network requests it must then call eMBEnable() to activate
* the protocol stack. In the main loop the function eMBPoll() must be called
* periodically. The time interval between pooling depends on the configured
* Modbus timeout. If an RTOS is available a separate task should be created
* and the task should always call the function eMBPoll().
*
* \code
* // Initialize protocol stack in RTU mode for a slave with address 10 = 0x0A
* eMBInit( MB_RTU, 0x0A, 38400, MB_PAR_EVEN );
* // Enable the Modbus Protocol Stack.
* eMBEnable( );
* for( ;; )
* {
* // Call the main polling loop of the Modbus protocol stack.
* eMBPoll( );
* ...
* }
* \endcode
*/
/* ----------------------- Defines ------------------------------------------*/
/*! \ingroup modbus
* \brief Use the default Modbus TCP port (502)
*/
#define MB_TCP_PORT_USE_DEFAULT 0
/* ----------------------- Type definitions ---------------------------------*/
/*! \ingroup modbus
* \brief Modbus serial transmission modes (RTU/ASCII).
*
* Modbus serial supports two transmission modes. Either ASCII or RTU. RTU
* is faster but has more hardware requirements and requires a network with
* a low jitter. ASCII is slower and more reliable on slower links (E.g. modems)
*/
typedef enum
{
MB_RTU, /*!< RTU transmission mode. */
MB_ASCII, /*!< ASCII transmission mode. */
MB_TCP /*!< TCP mode. */
} eMBMode;
/*! \ingroup modbus
* \brief If register should be written or read.
*
* This value is passed to the callback functions which support either
* reading or writing register values. Writing means that the application
* registers should be updated and reading means that the modbus protocol
* stack needs to know the current register values.
*
* \see eMBRegHoldingCB( ), eMBRegCoilsCB( ), eMBRegDiscreteCB( ) and
* eMBRegInputCB( ).
*/
typedef enum
{
MB_REG_READ, /*!< Read register values and pass to protocol stack. */
MB_REG_WRITE /*!< Update register values. */
} eMBRegisterMode;
/*! \ingroup modbus
* \brief Errorcodes used by all function in the protocol stack.
*/
typedef enum
{
MB_ENOERR, /*!< no error. */
MB_ENOREG, /*!< illegal register address. */
MB_EINVAL, /*!< illegal argument. */
MB_EPORTERR, /*!< porting layer error. */
MB_ENORES, /*!< insufficient resources. */
MB_EIO, /*!< I/O error. */
MB_EILLSTATE, /*!< protocol stack in illegal state. */
MB_ETIMEDOUT /*!< timeout error occurred. */
} eMBErrorCode;
/* ----------------------- Function prototypes ------------------------------*/
/*! \ingroup modbus
* \brief Initialize the Modbus protocol stack.
*
* This functions initializes the ASCII or RTU module and calls the
* init functions of the porting layer to prepare the hardware. Please
* note that the receiver is still disabled and no Modbus frames are
* processed until eMBEnable( ) has been called.
*
* \param eMode If ASCII or RTU mode should be used.
* \param ucSlaveAddress The slave address. Only frames sent to this
* address or to the broadcast address are processed.
* \param ucPort The port to use. E.g. 1 for COM1 on windows. This value
* is platform dependent and some ports simply choose to ignore it.
* \param ulBaudRate The baudrate. E.g. 19200. Supported baudrates depend
* on the porting layer.
* \param eParity Parity used for serial transmission.
*
* \return If no error occurs the function returns eMBErrorCode::MB_ENOERR.
* The protocol is then in the disabled state and ready for activation
* by calling eMBEnable( ). Otherwise one of the following error codes
* is returned:
* - eMBErrorCode::MB_EINVAL If the slave address was not valid. Valid
* slave addresses are in the range 1 - 247.
* - eMBErrorCode::MB_EPORTERR IF the porting layer returned an error.
*/
eMBErrorCode eMBInit( eMBMode eMode, UCHAR ucSlaveAddress,
UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity );
/*! \ingroup modbus
* \brief Initialize the Modbus protocol stack for Modbus TCP.
*
* This function initializes the Modbus TCP Module. Please note that
* frame processing is still disabled until eMBEnable( ) is called.
*
* \param usTCPPort The TCP port to listen on.
* \return If the protocol stack has been initialized correctly the function
* returns eMBErrorCode::MB_ENOERR. Otherwise one of the following error
* codes is returned:
* - eMBErrorCode::MB_EINVAL If the slave address was not valid. Valid
* slave addresses are in the range 1 - 247.
* - eMBErrorCode::MB_EPORTERR IF the porting layer returned an error.
*/
eMBErrorCode eMBTCPInit( USHORT usTCPPort );
/*! \ingroup modbus
* \brief Release resources used by the protocol stack.
*
* This function disables the Modbus protocol stack and release all
* hardware resources. It must only be called when the protocol stack
* is disabled.
*
* \note Note all ports implement this function. A port which wants to
* get an callback must define the macro MB_PORT_HAS_CLOSE to 1.
*
* \return If the resources where released it return eMBErrorCode::MB_ENOERR.
* If the protocol stack is not in the disabled state it returns
* eMBErrorCode::MB_EILLSTATE.
*/
eMBErrorCode eMBClose( void );
/*! \ingroup modbus
* \brief Enable the Modbus protocol stack.
*
* This function enables processing of Modbus frames. Enabling the protocol
* stack is only possible if it is in the disabled state.
*
* \return If the protocol stack is now in the state enabled it returns
* eMBErrorCode::MB_ENOERR. If it was not in the disabled state it
* return eMBErrorCode::MB_EILLSTATE.
*/
eMBErrorCode eMBEnable( void );
/*! \ingroup modbus
* \brief Disable the Modbus protocol stack.
*
* This function disables processing of Modbus frames.
*
* \return If the protocol stack has been disabled it returns
* eMBErrorCode::MB_ENOERR. If it was not in the enabled state it returns
* eMBErrorCode::MB_EILLSTATE.
*/
eMBErrorCode eMBDisable( void );
/*! \ingroup modbus
* \brief The main pooling loop of the Modbus protocol stack.
*
* This function must be called periodically. The timer interval required
* is given by the application dependent Modbus slave timeout. Internally the
* function calls xMBPortEventGet() and waits for an event from the receiver or
* transmitter state machines.
*
* \return If the protocol stack is not in the enabled state the function
* returns eMBErrorCode::MB_EILLSTATE. Otherwise it returns
* eMBErrorCode::MB_ENOERR.
*/
eMBErrorCode eMBPoll( void );
/*! \ingroup modbus
* \brief Configure the slave id of the device.
*
* This function should be called when the Modbus function <em>Report Slave ID</em>
* is enabled ( By defining MB_FUNC_OTHER_REP_SLAVEID_ENABLED in mbconfig.h ).
*
* \param ucSlaveID Values is returned in the <em>Slave ID</em> byte of the
* <em>Report Slave ID</em> response.
* \param xIsRunning If TRUE the <em>Run Indicator Status</em> byte is set to 0xFF.
* otherwise the <em>Run Indicator Status</em> is 0x00.
* \param pucAdditional Values which should be returned in the <em>Additional</em>
* bytes of the <em> Report Slave ID</em> response.
* \param usAdditionalLen Length of the buffer <code>pucAdditonal</code>.
*
* \return If the static buffer defined by MB_FUNC_OTHER_REP_SLAVEID_BUF in
* mbconfig.h is to small it returns eMBErrorCode::MB_ENORES. Otherwise
* it returns eMBErrorCode::MB_ENOERR.
*/
eMBErrorCode eMBSetSlaveID( UCHAR ucSlaveID, BOOL xIsRunning,
UCHAR const *pucAdditional,
USHORT usAdditionalLen );
/*! \ingroup modbus
* \brief Registers a callback handler for a given function code.
*
* This function registers a new callback handler for a given function code.
* The callback handler supplied is responsible for interpreting the Modbus PDU and
* the creation of an appropriate response. In case of an error it should return
* one of the possible Modbus exceptions which results in a Modbus exception frame
* sent by the protocol stack.
*
* \param ucFunctionCode The Modbus function code for which this handler should
* be registers. Valid function codes are in the range 1 to 127.
* \param pxHandler The function handler which should be called in case
* such a frame is received. If \c NULL a previously registered function handler
* for this function code is removed.
*
* \return eMBErrorCode::MB_ENOERR if the handler has been installed. If no
* more resources are available it returns eMBErrorCode::MB_ENORES. In this
* case the values in mbconfig.h should be adjusted. If the argument was not
* valid it returns eMBErrorCode::MB_EINVAL.
*/
eMBErrorCode eMBRegisterCB( UCHAR ucFunctionCode,
pxMBFunctionHandler pxHandler );
/* ----------------------- Callback -----------------------------------------*/
/*! \defgroup modbus_registers Modbus Registers
* \code #include "mb.h" \endcode
* The protocol stack does not internally allocate any memory for the
* registers. This makes the protocol stack very small and also usable on
* low end targets. In addition the values don't have to be in the memory
* and could for example be stored in a flash.<br>
* Whenever the protocol stack requires a value it calls one of the callback
* function with the register address and the number of registers to read
* as an argument. The application should then read the actual register values
* (for example the ADC voltage) and should store the result in the supplied
* buffer.<br>
* If the protocol stack wants to update a register value because a write
* register function was received a buffer with the new register values is
* passed to the callback function. The function should then use these values
* to update the application register values.
*/
/*! \ingroup modbus_registers
* \brief Callback function used if the value of a <em>Input Register</em>
* is required by the protocol stack. The starting register address is given
* by \c usAddress and the last register is given by <tt>usAddress +
* usNRegs - 1</tt>.
*
* \param pucRegBuffer A buffer where the callback function should write
* the current value of the modbus registers to.
* \param usAddress The starting address of the register. Input registers
* are in the range 1 - 65535.
* \param usNRegs Number of registers the callback function must supply.
*
* \return The function must return one of the following error codes:
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
* Modbus response is sent.
* - eMBErrorCode::MB_ENOREG If the application can not supply values
* for registers within this range. In this case a
* <b>ILLEGAL DATA ADDRESS</b> exception frame is sent as a response.
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
* currently not available and the application dependent response
* timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
* exception is sent as a response.
* - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
* a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
*/
eMBErrorCode eMBRegInputCB( UCHAR * pucRegBuffer, USHORT usAddress,
USHORT usNRegs );
/*! \ingroup modbus_registers
* \brief Callback function used if a <em>Holding Register</em> value is
* read or written by the protocol stack. The starting register address
* is given by \c usAddress and the last register is given by
* <tt>usAddress + usNRegs - 1</tt>.
*
* \param pucRegBuffer If the application registers values should be updated the
* buffer points to the new registers values. If the protocol stack needs
* to now the current values the callback function should write them into
* this buffer.
* \param usAddress The starting address of the register.
* \param usNRegs Number of registers to read or write.
* \param eMode If eMBRegisterMode::MB_REG_WRITE the application register
* values should be updated from the values in the buffer. For example
* this would be the case when the Modbus master has issued an
* <b>WRITE SINGLE REGISTER</b> command.
* If the value eMBRegisterMode::MB_REG_READ the application should copy
* the current values into the buffer \c pucRegBuffer.
*
* \return The function must return one of the following error codes:
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
* Modbus response is sent.
* - eMBErrorCode::MB_ENOREG If the application can not supply values
* for registers within this range. In this case a
* <b>ILLEGAL DATA ADDRESS</b> exception frame is sent as a response.
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
* currently not available and the application dependent response
* timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
* exception is sent as a response.
* - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
* a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
*/
eMBErrorCode eMBRegHoldingCB( UCHAR * pucRegBuffer, USHORT usAddress,
USHORT usNRegs, eMBRegisterMode eMode );
/*! \ingroup modbus_registers
* \brief Callback function used if a <em>Coil Register</em> value is
* read or written by the protocol stack. If you are going to use
* this function you might use the functions xMBUtilSetBits( ) and
* xMBUtilGetBits( ) for working with bitfields.
*
* \param pucRegBuffer The bits are packed in bytes where the first coil
* starting at address \c usAddress is stored in the LSB of the
* first byte in the buffer <code>pucRegBuffer</code>.
* If the buffer should be written by the callback function unused
* coil values (I.e. if not a multiple of eight coils is used) should be set
* to zero.
* \param usAddress The first coil number.
* \param usNCoils Number of coil values requested.
* \param eMode If eMBRegisterMode::MB_REG_WRITE the application values should
* be updated from the values supplied in the buffer \c pucRegBuffer.
* If eMBRegisterMode::MB_REG_READ the application should store the current
* values in the buffer \c pucRegBuffer.
*
* \return The function must return one of the following error codes:
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
* Modbus response is sent.
* - eMBErrorCode::MB_ENOREG If the application does not map an coils
* within the requested address range. In this case a
* <b>ILLEGAL DATA ADDRESS</b> is sent as a response.
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
* currently not available and the application dependent response
* timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
* exception is sent as a response.
* - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
* a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
*/
eMBErrorCode eMBRegCoilsCB( UCHAR * pucRegBuffer, USHORT usAddress,
USHORT usNCoils, eMBRegisterMode eMode );
/*! \ingroup modbus_registers
* \brief Callback function used if a <em>Input Discrete Register</em> value is
* read by the protocol stack.
*
* If you are going to use his function you might use the functions
* xMBUtilSetBits( ) and xMBUtilGetBits( ) for working with bitfields.
*
* \param pucRegBuffer The buffer should be updated with the current
* coil values. The first discrete input starting at \c usAddress must be
* stored at the LSB of the first byte in the buffer. If the requested number
* is not a multiple of eight the remaining bits should be set to zero.
* \param usAddress The starting address of the first discrete input.
* \param usNDiscrete Number of discrete input values.
* \return The function must return one of the following error codes:
* - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal
* Modbus response is sent.
* - eMBErrorCode::MB_ENOREG If no such discrete inputs exists.
* In this case a <b>ILLEGAL DATA ADDRESS</b> exception frame is sent
* as a response.
* - eMBErrorCode::MB_ETIMEDOUT If the requested register block is
* currently not available and the application dependent response
* timeout would be violated. In this case a <b>SLAVE DEVICE BUSY</b>
* exception is sent as a response.
* - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case
* a <b>SLAVE DEVICE FAILURE</b> exception is sent as a response.
*/
eMBErrorCode eMBRegDiscreteCB( UCHAR * pucRegBuffer, USHORT usAddress,
USHORT usNDiscrete );
#ifdef __cplusplus
PR_END_EXTERN_C
#endif
#endif
components/net/freemodbus/modbus/include/mbconfig.h 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbconfig.h,v 1.14 2006/12/07 22:10:34 wolti Exp $
*/
#ifndef _MB_CONFIG_H
#define _MB_CONFIG_H
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif
/* ----------------------- Defines ------------------------------------------*/
/*! \defgroup modbus_cfg Modbus Configuration
*
* Most modules in the protocol stack are completly optional and can be
* excluded. This is specially important if target resources are very small
* and program memory space should be saved.<br>
*
* All of these settings are available in the file <code>mbconfig.h</code>
*/
/*! \addtogroup modbus_cfg
* @{
*/
/*! \brief If Modbus ASCII support is enabled. */
#define MB_ASCII_ENABLED ( 1 )
/*! \brief If Modbus RTU support is enabled. */
#define MB_RTU_ENABLED ( 1 )
/*! \brief If Modbus TCP support is enabled. */
#define MB_TCP_ENABLED ( 0 )
/*! \brief The character timeout value for Modbus ASCII.
*
* The character timeout value is not fixed for Modbus ASCII and is therefore
* a configuration option. It should be set to the maximum expected delay
* time of the network.
*/
#define MB_ASCII_TIMEOUT_SEC ( 1 )
/*! \brief Maximum number of Modbus functions codes the protocol stack
* should support.
*
* The maximum number of supported Modbus functions must be greater than
* the sum of all enabled functions in this file and custom function
* handlers. If set to small adding more functions will fail.
*/
#define MB_FUNC_HANDLERS_MAX ( 16 )
/*! \brief Number of bytes which should be allocated for the <em>Report Slave ID
* </em>command.
*
* This number limits the maximum size of the additional segment in the
* report slave id function. See eMBSetSlaveID( ) for more information on
* how to set this value. It is only used if MB_FUNC_OTHER_REP_SLAVEID_ENABLED
* is set to <code>1</code>.
*/
#define MB_FUNC_OTHER_REP_SLAVEID_BUF ( 32 )
/*! \brief If the <em>Report Slave ID</em> function should be enabled. */
#define MB_FUNC_OTHER_REP_SLAVEID_ENABLED ( 1 )
/*! \brief If the <em>Read Input Registers</em> function should be enabled. */
#define MB_FUNC_READ_INPUT_ENABLED ( 1 )
/*! \brief If the <em>Read Holding Registers</em> function should be enabled. */
#define MB_FUNC_READ_HOLDING_ENABLED ( 1 )
/*! \brief If the <em>Write Single Register</em> function should be enabled. */
#define MB_FUNC_WRITE_HOLDING_ENABLED ( 1 )
/*! \brief If the <em>Write Multiple registers</em> function should be enabled. */
#define MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED ( 1 )
/*! \brief If the <em>Read Coils</em> function should be enabled. */
#define MB_FUNC_READ_COILS_ENABLED ( 1 )
/*! \brief If the <em>Write Coils</em> function should be enabled. */
#define MB_FUNC_WRITE_COIL_ENABLED ( 1 )
/*! \brief If the <em>Write Multiple Coils</em> function should be enabled. */
#define MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED ( 1 )
/*! \brief If the <em>Read Discrete Inputs</em> function should be enabled. */
#define MB_FUNC_READ_DISCRETE_INPUTS_ENABLED ( 1 )
/*! \brief If the <em>Read/Write Multiple Registers</em> function should be enabled. */
#define MB_FUNC_READWRITE_HOLDING_ENABLED ( 1 )
/*! @} */
#ifdef __cplusplus
PR_END_EXTERN_C
#endif
#endif
components/net/freemodbus/modbus/include/mbframe.h 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbframe.h,v 1.9 2006/12/07 22:10:34 wolti Exp $
*/
#ifndef _MB_FRAME_H
#define _MB_FRAME_H
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif
/*!
* Constants which defines the format of a modbus frame. The example is
* shown for a Modbus RTU/ASCII frame. Note that the Modbus PDU is not
* dependent on the underlying transport.
*
* <code>
* <------------------------ MODBUS SERIAL LINE PDU (1) ------------------->
* <----------- MODBUS PDU (1') ---------------->
* +-----------+---------------+----------------------------+-------------+
* | Address | Function Code | Data | CRC/LRC |
* +-----------+---------------+----------------------------+-------------+
* | | | |
* (2) (3/2') (3') (4)
*
* (1) ... MB_SER_PDU_SIZE_MAX = 256
* (2) ... MB_SER_PDU_ADDR_OFF = 0
* (3) ... MB_SER_PDU_PDU_OFF = 1
* (4) ... MB_SER_PDU_SIZE_CRC = 2
*
* (1') ... MB_PDU_SIZE_MAX = 253
* (2') ... MB_PDU_FUNC_OFF = 0
* (3') ... MB_PDU_DATA_OFF = 1
* </code>
*/
/* ----------------------- Defines ------------------------------------------*/
#define MB_PDU_SIZE_MAX 253 /*!< Maximum size of a PDU. */
#define MB_PDU_SIZE_MIN 1 /*!< Function Code */
#define MB_PDU_FUNC_OFF 0 /*!< Offset of function code in PDU. */
#define MB_PDU_DATA_OFF 1 /*!< Offset for response data in PDU. */
/* ----------------------- Prototypes 0-------------------------------------*/
typedef void ( *pvMBFrameStart ) ( void );
typedef void ( *pvMBFrameStop ) ( void );
typedef eMBErrorCode( *peMBFrameReceive ) ( UCHAR * pucRcvAddress,
UCHAR ** pucFrame,
USHORT * pusLength );
typedef eMBErrorCode( *peMBFrameSend ) ( UCHAR slaveAddress,
const UCHAR * pucFrame,
USHORT usLength );
typedef void( *pvMBFrameClose ) ( void );
#ifdef __cplusplus
PR_END_EXTERN_C
#endif
#endif
components/net/freemodbus/modbus/include/mbfunc.h 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbfunc.h,v 1.12 2006/12/07 22:10:34 wolti Exp $
*/
#ifndef _MB_FUNC_H
#define _MB_FUNC_H
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif
#if MB_FUNC_OTHER_REP_SLAVEID_BUF > 0
eMBException eMBFuncReportSlaveID( UCHAR * pucFrame, USHORT * usLen );
#endif
#if MB_FUNC_READ_INPUT_ENABLED > 0
eMBException eMBFuncReadInputRegister( UCHAR * pucFrame, USHORT * usLen );
#endif
#if MB_FUNC_READ_HOLDING_ENABLED > 0
eMBException eMBFuncReadHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
#endif
#if MB_FUNC_WRITE_HOLDING_ENABLED > 0
eMBException eMBFuncWriteHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
#endif
#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
eMBException eMBFuncWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
#endif
#if MB_FUNC_READ_COILS_ENABLED > 0
eMBException eMBFuncReadCoils( UCHAR * pucFrame, USHORT * usLen );
#endif
#if MB_FUNC_WRITE_COIL_ENABLED > 0
eMBException eMBFuncWriteCoil( UCHAR * pucFrame, USHORT * usLen );
#endif
#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
eMBException eMBFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen );
#endif
#if MB_FUNC_READ_DISCRETE_INPUTS_ENABLED > 0
eMBException eMBFuncReadDiscreteInputs( UCHAR * pucFrame, USHORT * usLen );
#endif
#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
eMBException eMBFuncReadWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen );
#endif
#ifdef __cplusplus
PR_END_EXTERN_C
#endif
#endif
components/net/freemodbus/modbus/include/mbport.h 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbport.h,v 1.17 2006/12/07 22:10:34 wolti Exp $
*/
#ifndef _MB_PORT_H
#define _MB_PORT_H
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif
/* ----------------------- Type definitions ---------------------------------*/
typedef enum
{
EV_READY, /*!< Startup finished. */
EV_FRAME_RECEIVED, /*!< Frame received. */
EV_EXECUTE, /*!< Execute function. */
EV_FRAME_SENT /*!< Frame sent. */
} eMBEventType;
/*! \ingroup modbus
* \brief Parity used for characters in serial mode.
*
* The parity which should be applied to the characters sent over the serial
* link. Please note that this values are actually passed to the porting
* layer and therefore not all parity modes might be available.
*/
typedef enum
{
MB_PAR_NONE, /*!< No parity. */
MB_PAR_ODD, /*!< Odd parity. */
MB_PAR_EVEN /*!< Even parity. */
} eMBParity;
/* ----------------------- Supporting functions -----------------------------*/
BOOL xMBPortEventInit( void );
BOOL xMBPortEventPost( eMBEventType eEvent );
BOOL xMBPortEventGet( /*@out@ */ eMBEventType * eEvent );
/* ----------------------- Serial port functions ----------------------------*/
BOOL xMBPortSerialInit( UCHAR ucPort, ULONG ulBaudRate,
UCHAR ucDataBits, eMBParity eParity );
void vMBPortClose( void );
void xMBPortSerialClose( void );
void vMBPortSerialEnable( BOOL xRxEnable, BOOL xTxEnable );
INLINE BOOL xMBPortSerialGetByte( CHAR * pucByte );
INLINE BOOL xMBPortSerialPutByte( CHAR ucByte );
/* ----------------------- Timers functions ---------------------------------*/
BOOL xMBPortTimersInit( USHORT usTimeOut50us );
void xMBPortTimersClose( void );
INLINE void vMBPortTimersEnable( void );
INLINE void vMBPortTimersDisable( void );
/* ----------------------- Callback for the protocol stack ------------------*/
/*!
* \brief Callback function for the porting layer when a new byte is
* available.
*
* Depending upon the mode this callback function is used by the RTU or
* ASCII transmission layers. In any case a call to xMBPortSerialGetByte()
* must immediately return a new character.
*
* \return <code>TRUE</code> if a event was posted to the queue because
* a new byte was received. The port implementation should wake up the
* tasks which are currently blocked on the eventqueue.
*/
extern BOOL( *pxMBFrameCBByteReceived ) ( void );
extern BOOL( *pxMBFrameCBTransmitterEmpty ) ( void );
extern BOOL( *pxMBPortCBTimerExpired ) ( void );
/* ----------------------- TCP port functions -------------------------------*/
BOOL xMBTCPPortInit( USHORT usTCPPort );
void vMBTCPPortClose( void );
void vMBTCPPortDisable( void );
BOOL xMBTCPPortGetRequest( UCHAR **ppucMBTCPFrame, USHORT * usTCPLength );
BOOL xMBTCPPortSendResponse( const UCHAR *pucMBTCPFrame, USHORT usTCPLength );
#ifdef __cplusplus
PR_END_EXTERN_C
#endif
#endif
components/net/freemodbus/modbus/include/mbproto.h 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbproto.h,v 1.14 2006/12/07 22:10:34 wolti Exp $
*/
#ifndef _MB_PROTO_H
#define _MB_PROTO_H
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif
/* ----------------------- Defines ------------------------------------------*/
#define MB_ADDRESS_BROADCAST ( 0 ) /*! Modbus broadcast address. */
#define MB_ADDRESS_MIN ( 1 ) /*! Smallest possible slave address. */
#define MB_ADDRESS_MAX ( 247 ) /*! Biggest possible slave address. */
#define MB_FUNC_NONE ( 0 )
#define MB_FUNC_READ_COILS ( 1 )
#define MB_FUNC_READ_DISCRETE_INPUTS ( 2 )
#define MB_FUNC_WRITE_SINGLE_COIL ( 5 )
#define MB_FUNC_WRITE_MULTIPLE_COILS ( 15 )
#define MB_FUNC_READ_HOLDING_REGISTER ( 3 )
#define MB_FUNC_READ_INPUT_REGISTER ( 4 )
#define MB_FUNC_WRITE_REGISTER ( 6 )
#define MB_FUNC_WRITE_MULTIPLE_REGISTERS ( 16 )
#define MB_FUNC_READWRITE_MULTIPLE_REGISTERS ( 23 )
#define MB_FUNC_DIAG_READ_EXCEPTION ( 7 )
#define MB_FUNC_DIAG_DIAGNOSTIC ( 8 )
#define MB_FUNC_DIAG_GET_COM_EVENT_CNT ( 11 )
#define MB_FUNC_DIAG_GET_COM_EVENT_LOG ( 12 )
#define MB_FUNC_OTHER_REPORT_SLAVEID ( 17 )
#define MB_FUNC_ERROR ( 128 )
/* ----------------------- Type definitions ---------------------------------*/
typedef enum
{
MB_EX_NONE = 0x00,
MB_EX_ILLEGAL_FUNCTION = 0x01,
MB_EX_ILLEGAL_DATA_ADDRESS = 0x02,
MB_EX_ILLEGAL_DATA_VALUE = 0x03,
MB_EX_SLAVE_DEVICE_FAILURE = 0x04,
MB_EX_ACKNOWLEDGE = 0x05,
MB_EX_SLAVE_BUSY = 0x06,
MB_EX_MEMORY_PARITY_ERROR = 0x08,
MB_EX_GATEWAY_PATH_FAILED = 0x0A,
MB_EX_GATEWAY_TGT_FAILED = 0x0B
} eMBException;
typedef eMBException( *pxMBFunctionHandler ) ( UCHAR * pucFrame, USHORT * pusLength );
typedef struct
{
UCHAR ucFunctionCode;
pxMBFunctionHandler pxHandler;
} xMBFunctionHandler;
#ifdef __cplusplus
PR_END_EXTERN_C
#endif
#endif
components/net/freemodbus/modbus/include/mbutils.h 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbutils.h,v 1.5 2006/12/07 22:10:34 wolti Exp $
*/
#ifndef _MB_UTILS_H
#define _MB_UTILS_H
#ifdef __cplusplus
PR_BEGIN_EXTERN_C
#endif
/*! \defgroup modbus_utils Utilities
*
* This module contains some utility functions which can be used by
* the application. It includes some special functions for working with
* bitfields backed by a character array buffer.
*
*/
/*! \addtogroup modbus_utils
* @{
*/
/*! \brief Function to set bits in a byte buffer.
*
* This function allows the efficient use of an array to implement bitfields.
* The array used for storing the bits must always be a multiple of two
* bytes. Up to eight bits can be set or cleared in one operation.
*
* \param ucByteBuf A buffer where the bit values are stored. Must be a
* multiple of 2 bytes. No length checking is performed and if
* usBitOffset / 8 is greater than the size of the buffer memory contents
* is overwritten.
* \param usBitOffset The starting address of the bits to set. The first
* bit has the offset 0.
* \param ucNBits Number of bits to modify. The value must always be smaller
* than 8.
* \param ucValues Thew new values for the bits. The value for the first bit
* starting at <code>usBitOffset</code> is the LSB of the value
* <code>ucValues</code>
*
* \code
* ucBits[2] = {0, 0};
*
* // Set bit 4 to 1 (read: set 1 bit starting at bit offset 4 to value 1)
* xMBUtilSetBits( ucBits, 4, 1, 1 );
*
* // Set bit 7 to 1 and bit 8 to 0.
* xMBUtilSetBits( ucBits, 7, 2, 0x01 );
*
* // Set bits 8 - 11 to 0x05 and bits 12 - 15 to 0x0A;
* xMBUtilSetBits( ucBits, 8, 8, 0x5A);
* \endcode
*/
void xMBUtilSetBits( UCHAR * ucByteBuf, USHORT usBitOffset,
UCHAR ucNBits, UCHAR ucValues );
/*! \brief Function to read bits in a byte buffer.
*
* This function is used to extract up bit values from an array. Up to eight
* bit values can be extracted in one step.
*
* \param ucByteBuf A buffer where the bit values are stored.
* \param usBitOffset The starting address of the bits to set. The first
* bit has the offset 0.
* \param ucNBits Number of bits to modify. The value must always be smaller
* than 8.
*
* \code
* UCHAR ucBits[2] = {0, 0};
* UCHAR ucResult;
*
* // Extract the bits 3 - 10.
* ucResult = xMBUtilGetBits( ucBits, 3, 8 );
* \endcode
*/
UCHAR xMBUtilGetBits( UCHAR * ucByteBuf, USHORT usBitOffset,
UCHAR ucNBits );
/*! @} */
#ifdef __cplusplus
PR_END_EXTERN_C
#endif
#endif
components/net/freemodbus/modbus/mb.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mb.c,v 1.27 2007/02/18 23:45:41 wolti Exp $
*/
/* ----------------------- System includes ----------------------------------*/
#include "stdlib.h"
#include "string.h"
/* ----------------------- Platform includes --------------------------------*/
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbconfig.h"
#include "mbframe.h"
#include "mbproto.h"
#include "mbfunc.h"
#include "mbport.h"
#if MB_RTU_ENABLED == 1
#include "mbrtu.h"
#endif
#if MB_ASCII_ENABLED == 1
#include "mbascii.h"
#endif
#if MB_TCP_ENABLED == 1
#include "mbtcp.h"
#endif
#ifndef MB_PORT_HAS_CLOSE
#define MB_PORT_HAS_CLOSE 0
#endif
/* ----------------------- Static variables ---------------------------------*/
static UCHAR ucMBAddress;
static eMBMode eMBCurrentMode;
static enum
{
STATE_ENABLED,
STATE_DISABLED,
STATE_NOT_INITIALIZED
} eMBState = STATE_NOT_INITIALIZED;
/* Functions pointer which are initialized in eMBInit( ). Depending on the
* mode (RTU or ASCII) the are set to the correct implementations.
*/
static peMBFrameSend peMBFrameSendCur;
static pvMBFrameStart pvMBFrameStartCur;
static pvMBFrameStop pvMBFrameStopCur;
static peMBFrameReceive peMBFrameReceiveCur;
static pvMBFrameClose pvMBFrameCloseCur;
/* Callback functions required by the porting layer. They are called when
* an external event has happend which includes a timeout or the reception
* or transmission of a character.
*/
BOOL( *pxMBFrameCBByteReceived ) ( void );
BOOL( *pxMBFrameCBTransmitterEmpty ) ( void );
BOOL( *pxMBPortCBTimerExpired ) ( void );
BOOL( *pxMBFrameCBReceiveFSMCur ) ( void );
BOOL( *pxMBFrameCBTransmitFSMCur ) ( void );
/* An array of Modbus functions handlers which associates Modbus function
* codes with implementing functions.
*/
static xMBFunctionHandler xFuncHandlers[MB_FUNC_HANDLERS_MAX] = {
#if MB_FUNC_OTHER_REP_SLAVEID_ENABLED > 0
{MB_FUNC_OTHER_REPORT_SLAVEID, eMBFuncReportSlaveID},
#endif
#if MB_FUNC_READ_INPUT_ENABLED > 0
{MB_FUNC_READ_INPUT_REGISTER, eMBFuncReadInputRegister},
#endif
#if MB_FUNC_READ_HOLDING_ENABLED > 0
{MB_FUNC_READ_HOLDING_REGISTER, eMBFuncReadHoldingRegister},
#endif
#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
{MB_FUNC_WRITE_MULTIPLE_REGISTERS, eMBFuncWriteMultipleHoldingRegister},
#endif
#if MB_FUNC_WRITE_HOLDING_ENABLED > 0
{MB_FUNC_WRITE_REGISTER, eMBFuncWriteHoldingRegister},
#endif
#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
{MB_FUNC_READWRITE_MULTIPLE_REGISTERS, eMBFuncReadWriteMultipleHoldingRegister},
#endif
#if MB_FUNC_READ_COILS_ENABLED > 0
{MB_FUNC_READ_COILS, eMBFuncReadCoils},
#endif
#if MB_FUNC_WRITE_COIL_ENABLED > 0
{MB_FUNC_WRITE_SINGLE_COIL, eMBFuncWriteCoil},
#endif
#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
{MB_FUNC_WRITE_MULTIPLE_COILS, eMBFuncWriteMultipleCoils},
#endif
#if MB_FUNC_READ_DISCRETE_INPUTS_ENABLED > 0
{MB_FUNC_READ_DISCRETE_INPUTS, eMBFuncReadDiscreteInputs},
#endif
};
/* ----------------------- Start implementation -----------------------------*/
eMBErrorCode
eMBInit( eMBMode eMode, UCHAR ucSlaveAddress, UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity )
{
eMBErrorCode eStatus = MB_ENOERR;
/* check preconditions */
if( ( ucSlaveAddress == MB_ADDRESS_BROADCAST ) ||
( ucSlaveAddress < MB_ADDRESS_MIN ) || ( ucSlaveAddress > MB_ADDRESS_MAX ) )
{
eStatus = MB_EINVAL;
}
else
{
ucMBAddress = ucSlaveAddress;
switch ( eMode )
{
#if MB_RTU_ENABLED > 0
case MB_RTU:
pvMBFrameStartCur = eMBRTUStart;
pvMBFrameStopCur = eMBRTUStop;
peMBFrameSendCur = eMBRTUSend;
peMBFrameReceiveCur = eMBRTUReceive;
pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBPortClose : NULL;
pxMBFrameCBByteReceived = xMBRTUReceiveFSM;
pxMBFrameCBTransmitterEmpty = xMBRTUTransmitFSM;
pxMBPortCBTimerExpired = xMBRTUTimerT35Expired;
eStatus = eMBRTUInit( ucMBAddress, ucPort, ulBaudRate, eParity );
break;
#endif
#if MB_ASCII_ENABLED > 0
case MB_ASCII:
pvMBFrameStartCur = eMBASCIIStart;
pvMBFrameStopCur = eMBASCIIStop;
peMBFrameSendCur = eMBASCIISend;
peMBFrameReceiveCur = eMBASCIIReceive;
pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBPortClose : NULL;
pxMBFrameCBByteReceived = xMBASCIIReceiveFSM;
pxMBFrameCBTransmitterEmpty = xMBASCIITransmitFSM;
pxMBPortCBTimerExpired = xMBASCIITimerT1SExpired;
eStatus = eMBASCIIInit( ucMBAddress, ucPort, ulBaudRate, eParity );
break;
#endif
default:
eStatus = MB_EINVAL;
}
if( eStatus == MB_ENOERR )
{
if( !xMBPortEventInit( ) )
{
/* port dependent event module initalization failed. */
eStatus = MB_EPORTERR;
}
else
{
eMBCurrentMode = eMode;
eMBState = STATE_DISABLED;
}
}
}
return eStatus;
}
#if MB_TCP_ENABLED > 0
eMBErrorCode
eMBTCPInit( USHORT ucTCPPort )
{
eMBErrorCode eStatus = MB_ENOERR;
if( ( eStatus = eMBTCPDoInit( ucTCPPort ) ) != MB_ENOERR )
{
eMBState = STATE_DISABLED;
}
else if( !xMBPortEventInit( ) )
{
/* Port dependent event module initalization failed. */
eStatus = MB_EPORTERR;
}
else
{
pvMBFrameStartCur = eMBTCPStart;
pvMBFrameStopCur = eMBTCPStop;
peMBFrameReceiveCur = eMBTCPReceive;
peMBFrameSendCur = eMBTCPSend;
pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBTCPPortClose : NULL;
ucMBAddress = MB_TCP_PSEUDO_ADDRESS;
eMBCurrentMode = MB_TCP;
eMBState = STATE_DISABLED;
}
return eStatus;
}
#endif
eMBErrorCode
eMBRegisterCB( UCHAR ucFunctionCode, pxMBFunctionHandler pxHandler )
{
int i;
eMBErrorCode eStatus;
if( ( 0 < ucFunctionCode ) && ( ucFunctionCode <= 127 ) )
{
ENTER_CRITICAL_SECTION( );
if( pxHandler != NULL )
{
for( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ )
{
if( ( xFuncHandlers[i].pxHandler == NULL ) ||
( xFuncHandlers[i].pxHandler == pxHandler ) )
{
xFuncHandlers[i].ucFunctionCode = ucFunctionCode;
xFuncHandlers[i].pxHandler = pxHandler;
break;
}
}
eStatus = ( i != MB_FUNC_HANDLERS_MAX ) ? MB_ENOERR : MB_ENORES;
}
else
{
for( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ )
{
if( xFuncHandlers[i].ucFunctionCode == ucFunctionCode )
{
xFuncHandlers[i].ucFunctionCode = 0;
xFuncHandlers[i].pxHandler = NULL;
break;
}
}
/* Remove can't fail. */
eStatus = MB_ENOERR;
}
EXIT_CRITICAL_SECTION( );
}
else
{
eStatus = MB_EINVAL;
}
return eStatus;
}
eMBErrorCode
eMBClose( void )
{
eMBErrorCode eStatus = MB_ENOERR;
if( eMBState == STATE_DISABLED )
{
if( pvMBFrameCloseCur != NULL )
{
pvMBFrameCloseCur( );
}
}
else
{
eStatus = MB_EILLSTATE;
}
return eStatus;
}
eMBErrorCode
eMBEnable( void )
{
eMBErrorCode eStatus = MB_ENOERR;
if( eMBState == STATE_DISABLED )
{
/* Activate the protocol stack. */
pvMBFrameStartCur( );
eMBState = STATE_ENABLED;
}
else
{
eStatus = MB_EILLSTATE;
}
return eStatus;
}
eMBErrorCode
eMBDisable( void )
{
eMBErrorCode eStatus;
if( eMBState == STATE_ENABLED )
{
pvMBFrameStopCur( );
eMBState = STATE_DISABLED;
eStatus = MB_ENOERR;
}
else if( eMBState == STATE_DISABLED )
{
eStatus = MB_ENOERR;
}
else
{
eStatus = MB_EILLSTATE;
}
return eStatus;
}
eMBErrorCode
eMBPoll( void )
{
static UCHAR *ucMBFrame;
static UCHAR ucRcvAddress;
static UCHAR ucFunctionCode;
static USHORT usLength;
static eMBException eException;
int i;
eMBErrorCode eStatus = MB_ENOERR;
eMBEventType eEvent;
/* Check if the protocol stack is ready. */
if( eMBState != STATE_ENABLED )
{
return MB_EILLSTATE;
}
/* Check if there is a event available. If not return control to caller.
* Otherwise we will handle the event. */
if( xMBPortEventGet( &eEvent ) == TRUE )
{
switch ( eEvent )
{
case EV_READY:
break;
case EV_FRAME_RECEIVED:
eStatus = peMBFrameReceiveCur( &ucRcvAddress, &ucMBFrame, &usLength );
if( eStatus == MB_ENOERR )
{
/* Check if the frame is for us. If not ignore the frame. */
if( ( ucRcvAddress == ucMBAddress ) || ( ucRcvAddress == MB_ADDRESS_BROADCAST ) )
{
( void )xMBPortEventPost( EV_EXECUTE );
}
}
break;
case EV_EXECUTE:
ucFunctionCode = ucMBFrame[MB_PDU_FUNC_OFF];
eException = MB_EX_ILLEGAL_FUNCTION;
for( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ )
{
/* No more function handlers registered. Abort. */
if( xFuncHandlers[i].ucFunctionCode == 0 )
{
break;
}
else if( xFuncHandlers[i].ucFunctionCode == ucFunctionCode )
{
eException = xFuncHandlers[i].pxHandler( ucMBFrame, &usLength );
break;
}
}
/* If the request was not sent to the broadcast address we
* return a reply. */
if( ucRcvAddress != MB_ADDRESS_BROADCAST )
{
if( eException != MB_EX_NONE )
{
/* An exception occured. Build an error frame. */
usLength = 0;
ucMBFrame[usLength++] = ( UCHAR )( ucFunctionCode | MB_FUNC_ERROR );
ucMBFrame[usLength++] = eException;
}
eStatus = peMBFrameSendCur( ucMBAddress, ucMBFrame, usLength );
}
break;
case EV_FRAME_SENT:
break;
}
}
return MB_ENOERR;
}
components/net/freemodbus/modbus/mbmaster.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* File : mbmaster.c
* This file is part of freemodbus in RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-04-04 yi.qiu first version
*/
/* ----------------------- Platform includes --------------------------------*/
#include "rtthread.h"
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbconfig.h"
#include "mbframe.h"
#include "mbproto.h"
#include "mbfunc.h"
eMBErrorCode eMBMReadHoldingRegisters (UCHAR ucSlaveAddress, USHORT usRegStartAddress,
UBYTE ubNRegs, UBYTE arusBufferOut[])
{
static UCHAR ucMBFrame[5];
eMBErrorCode eStatus = MB_ENOERR;
eMBEventType eEvent;
static UCHAR ucRcvAddress;
static USHORT usLength;
UCHAR *ucRcvFrame;
/* make up request frame */
ucMBFrame[0] = MB_FUNC_READ_HOLDING_REGISTER;
ucMBFrame[1] = (UCHAR)(usRegStartAddress >> 8);
ucMBFrame[2] = (UCHAR)(usRegStartAddress);
ucMBFrame[3] = (UCHAR)(ubNRegs >> 8);
ucMBFrame[4] = (UCHAR)(ubNRegs);
/* send request frame to slave device */
eStatus = eMBRTUSend( ucSlaveAddress, ucMBFrame, 5 );
/* wait on receive event */
if( xMBPortEventGet( &eEvent ) == TRUE )
{
eStatus = eMBRTUReceive( &ucRcvAddress, &ucRcvFrame, &usLength );
if( eStatus == MB_ENOERR )
{
/* Check if the frame is for us. If not ignore the frame. */
if( ( ucRcvAddress == ucSlaveAddress ) || ( ucRcvAddress == MB_ADDRESS_BROADCAST ) )
{
RT_ASSERT(ucRcvFrame[0] == MB_FUNC_READ_HOLDING_REGISTER);
RT_ASSERT(ucRcvFrame[1] == 2*ubNRegs)
rt_memcpy((UCHAR *)arusBufferOut, &ucRcvFrame[2], 2*ubNRegs);
}
}
}
else eStatus = MB_ETIMEDOUT;
return eStatus;
}
/*! @fn eMBErrorCode eMBMReadCoils (UCHAR ucSlaveAddress, USHORT usCoilStartAddress,
UBYTE ubNCoils, USHORT arusBufferOut[])
** @brief request coils
** @details
** @param ucSlaveAddress slave station address :from 1 to 247(max)
** @param usCoilStartAddress coils address
** @param ubNCoils request coils number
** @param arusBufferOut response packet buf
** @return eMBErrorCode
** @author LiJin
** @date 2010-04-07
** @note
*/
eMBErrorCode eMBMReadCoils (UCHAR ucSlaveAddress, USHORT usCoilStartAddress,
UBYTE ubNCoils, UBYTE arusBufferOut[])
{
static UCHAR ucMBFrame[5];
eMBErrorCode eStatus = MB_ENOERR;
eMBEventType eEvent;
static UCHAR ucRcvAddress;
static USHORT usLength;
UCHAR *ucRcvFrame;
/* make up request frame */
ucMBFrame[0] = MB_FUNC_READ_COILS;
ucMBFrame[1] = (UCHAR)(usCoilStartAddress >> 8);
ucMBFrame[2] = (UCHAR)(usCoilStartAddress);
ucMBFrame[3] = (UCHAR)(ubNCoils >> 8);
ucMBFrame[4] = (UCHAR)(ubNCoils);
/* send request frame to slave device */
eStatus = eMBRTUSend( ucSlaveAddress, ucMBFrame, 5 );
/* wait on receive event */
if( xMBPortEventGet( &eEvent ) == TRUE )
{
eStatus = eMBRTUReceive( &ucRcvAddress, &ucRcvFrame, &usLength );
if( eStatus == MB_ENOERR )
{
/* Check if the frame is for us. If not ignore the frame. */
if( ucRcvAddress == ucSlaveAddress )
{
RT_ASSERT(ucRcvFrame[0] == MB_FUNC_READ_COILS);
rt_memcpy((UCHAR *)arusBufferOut, &ucRcvFrame[2], ucRcvFrame[1]);
}
}
}
else eStatus = MB_ETIMEDOUT;
return eStatus;
}
components/net/freemodbus/modbus/port/demo.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* File : demo.c
* This file is part of freemodbus in RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-04-04 yi.qiu first version
* 2010-04-07 LiJin
*/
/* ----------------------- Platform includes --------------------------------*/
#include <rtthread.h>
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbconfig.h"
#include "mbframe.h"
#include "mbproto.h"
#include "mbfunc.h"
#include "varible.h"
void rt_modbus_thread_entry(void* parameter)
{
eMBErrorCode eStatus;
USHORT buf[1];
varible_group_t var_group;
var_group = varible_group_get();
eStatus = eMBInit( MB_RTU, 0x0A, 0, 115200, MB_PAR_EVEN );
/* Enable the Modbus Protocol Stack. */
eStatus = eMBEnable();
rt_thread_delay(50);
while(1)
{
int i = 0;
var_group->table->hash_table[].
if(eMBMReadCoils(0x01, 0x0, 0x6, buf) != MB_ETIMEDOUT)
rt_thread_delay(100);
}
}
int modbus_start(void)
{
rt_thread_t modbus_thread;
modbus_thread = rt_thread_create("modbus",
rt_modbus_thread_entry, RT_NULL,
2048, 20, 20);
if (modbus_thread != RT_NULL)
rt_thread_startup(modbus_thread);
return 0;
}
eMBErrorCode eMBRegInputCB( UCHAR * pucRegBuffer, USHORT usAddress, USHORT usNRegs )
{
return MB_ENOREG;
}
eMBErrorCode eMBRegHoldingCB( UCHAR * pucRegBuffer, USHORT usAddress, USHORT usNRegs,
eMBRegisterMode eMode )
{
return MB_ENOREG;
}
eMBErrorCode eMBRegCoilsCB( UCHAR * pucRegBuffer, USHORT usAddress, USHORT usNCoils,
eMBRegisterMode eMode )
{
return MB_ENOREG;
}
eMBErrorCode eMBRegDiscreteCB( UCHAR * pucRegBuffer, USHORT usAddress, USHORT usNDiscrete )
{
return MB_ENOREG;
}
components/net/freemodbus/modbus/port/port.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* File : porttimer.c
* This file is part of freemodbus in RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-04-04 yi.qiu first version
*/
/* ----------------------- System includes --------------------------------*/
#include <rtthread.h>
#include <rthw.h>
/* ----------------------- Modbus includes ----------------------------------*/
/* ----------------------- Variables ----------------------------------------*/
static int level;
/* ----------------------- Start implementation -----------------------------*/
void EnterCriticalSection(void)
{
level = rt_hw_interrupt_disable();
}
void ExitCriticalSection(void)
{
rt_hw_interrupt_enable(level);
}
components/net/freemodbus/modbus/port/port.h 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: BARE Port
* Copyright (C) 2006 Christian Walter <wolti@sil.at>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* File: $Id: port.h,v 1.1 2007/04/24 23:15:18 wolti Exp $
*/
#ifndef _PORT_H
#define _PORT_H
#include <rtthread.h>
#define INLINE
#define PR_BEGIN_EXTERN_C extern "C" {
#define PR_END_EXTERN_C }
#define assert(x) RT_ASSERT(x)
#define ENTER_CRITICAL_SECTION() EnterCriticalSection()
#define EXIT_CRITICAL_SECTION() ExitCriticalSection()
void EnterCriticalSection( void );
void ExitCriticalSection( void );
typedef rt_uint8_t BOOL;
typedef unsigned char UBYTE;
typedef unsigned char UCHAR;
typedef char CHAR;
typedef rt_uint16_t USHORT;
typedef rt_int16_t SHORT;
typedef rt_uint32_t ULONG;
typedef rt_int32_t LONG;
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
#endif
components/net/freemodbus/modbus/port/portevent.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* File : portevent.c
* This file is part of freemodbus in RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-04-04 yi.qiu first version
*/
/* ----------------------- Modbus includes ----------------------------------*/
#include <rtthread.h>
#include "mb.h"
#include "mbport.h"
/* ----------------------- Variables ----------------------------------------*/
static struct rt_event event;
/* ----------------------- Start implementation -----------------------------*/
BOOL xMBPortEventInit( void )
{
rt_event_init(&event, "modbus", RT_IPC_FLAG_FIFO);
return TRUE;
}
BOOL xMBPortEventPost( eMBEventType eEvent )
{
/* only care abot EV_FRAME_RECEIVED event */
if(eEvent == EV_FRAME_RECEIVED)
{
rt_event_send(&event, 1<<eEvent);
}
return TRUE;
}
BOOL xMBPortEventGet( eMBEventType * eEvent )
{
rt_uint32_t e;
rt_int32_t time_out = 3000/(1000/RT_TICK_PER_SECOND);
if(rt_event_recv(&event, (1<<EV_FRAME_RECEIVED),
RT_EVENT_FLAG_AND | RT_EVENT_FLAG_CLEAR,
time_out, &e) == RT_EOK)
{
*eEvent = EV_FRAME_RECEIVED;
return TRUE;
}
else
{
rt_kprintf("get event timeout\n");
return FALSE;
}
}
components/net/freemodbus/modbus/port/portserial.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* File : portserial.c
* This file is part of freemodbus in RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-04-04 yi.qiu first version
*/
#include <rtthread.h>
#include "port.h"
#include "serial.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbport.h"
#define UART1 ((struct uartport *)&U1BASE)
/* ----------------------- static functions ---------------------------------*/
static void rt_serial1_handler(int vector);
static void prvvUARTTxReadyISR(void);
static void prvvUARTRxISR(void);
extern rt_uint32_t PCLK;
/* ----------------------- Start implementation -----------------------------*/
void vMBPortSerialEnable( BOOL xRxEnable, BOOL xTxEnable )
{
if( xRxEnable )
{
INTSUBMSK &= ~(BIT_SUB_RXD1);
}
else
{
INTSUBMSK |= (BIT_SUB_RXD1);
}
if( xTxEnable )
{
INTSUBMSK &= ~(BIT_SUB_TXD1);
prvvUARTTxReadyISR();
}
else
{
INTSUBMSK |= (BIT_SUB_TXD1);
}
}
void vMBPortClose( void )
{
/* null */
}
BOOL xMBPortSerialInit( UCHAR ucPORT, ULONG ulBaudRate, UCHAR ucDataBits, eMBParity eParity )
{
int i;
/* FIFO enable, Tx/Rx FIFO clear */
UART1->ufcon = 0x0;
/* disable the flow control */
UART1->umcon = 0x0;
/* Normal,No parity,1 stop,8 bit */
UART1->ulcon = 0x3;
/*
* tx=level,rx=edge,disable timeout int.,enable rx error int.
* normal,interrupt or polling
*/
UART1->ucon = 0x245;
/* Set uart0 bps */
UART1->ubrd = (rt_int32_t)(PCLK / (ulBaudRate * 16)) - 1;
for (i = 0; i < 100; i++);
SUBSRCPND |= BIT_SUB_RXD1;
SUBSRCPND |= BIT_SUB_TXD1;
rt_hw_interrupt_install(INTUART1, rt_serial1_handler, RT_NULL);
rt_hw_interrupt_umask(INTUART1);
return TRUE;
}
BOOL xMBPortSerialPutByte( CHAR ucByte )
{
/* wait for room in the transmit FIFO */
while(!(USTAT1 & USTAT_TXB_EMPTY));
UTXH1 = (UCHAR)ucByte;
return TRUE;
}
BOOL xMBPortSerialGetByte( CHAR * pucByte )
{
while (!(USTAT1 & USTAT_RCV_READY));
*pucByte = URXH1;
return TRUE;
}
static void rt_serial1_handler(int vector)
{
if (SUBSRCPND & BIT_SUB_RXD1)
{
SUBSRCPND |= BIT_SUB_RXD1;
prvvUARTRxISR();
}
else if (SUBSRCPND & BIT_SUB_TXD1)
{
SUBSRCPND |= BIT_SUB_TXD1;
prvvUARTTxReadyISR();
}
}
/*
* Create an interrupt handler for the transmit buffer empty interrupt
* (or an equivalent) for your target processor. This function should then
* call pxMBFrameCBTransmitterEmpty( ) which tells the protocol stack that
* a new character can be sent. The protocol stack will then call
* xMBPortSerialPutByte( ) to send the character.
*/
static void prvvUARTTxReadyISR( void )
{
pxMBFrameCBTransmitterEmpty( );
}
/*
* Create an interrupt handler for the receive interrupt for your target
* processor. This function should then call pxMBFrameCBByteReceived( ). The
* protocol stack will then call xMBPortSerialGetByte( ) to retrieve the
* character.
*/
static void prvvUARTRxISR( void )
{
pxMBFrameCBByteReceived( );
}
components/net/freemodbus/modbus/port/porttimer.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* File : porttimer.c
* This file is part of freemodbus in RT-Thread RTOS
* COPYRIGHT (C) 2006 - 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2010-04-04 yi.qiu first version
*/
/* ----------------------- Platform includes --------------------------------*/
#include <rtthread.h>
#include <s3c24x0.h>
#include "port.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbport.h"
/* ----------------------- static functions ---------------------------------*/
static void prvvTIMERExpiredISR( void );
extern rt_uint32_t PCLK;
/* ----------------------- Start implementation -----------------------------*/
BOOL xMBPortTimersInit(USHORT usTim1Timerout50us)
{
/* all are interrupt mode,set Timer 3 MUX 1/4 */
TCFG1 &= 0xffff0fff;
TCFG1 |= 0x00001000;
TCNTB3 = (rt_int32_t)(usTim1Timerout50us*(PCLK/ (4 *16* 1000))) - 1;
/* manual update */
TCON = TCON & (~(0x0f<<16)) | (0x02<<16);
/* install interrupt handler */
rt_hw_interrupt_install(INTTIMER3, prvvTIMERExpiredISR, RT_NULL);
rt_hw_interrupt_umask(INTTIMER3);
/* start timer3, reload */
TCON = TCON & (~(0x0f<<16)) | (0x09<<16);
return TRUE;
}
void vMBPortTimersEnable(void)
{
/* start timer4, reload */
TCON = TCON & (~(0x0f<<16)) | (0x09<<16);
}
void vMBPortTimersDisable(void)
{
TCON = TCON & (~(0x01<<16));
}
static void prvvTIMERExpiredISR( void )
{
(void)pxMBPortCBTimerExpired();
}
components/net/freemodbus/modbus/rtu/mbcrc.c 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbcrc.c,v 1.7 2007/02/18 23:50:27 wolti Exp $
*/
/* ----------------------- Platform includes --------------------------------*/
#include "port.h"
static const UCHAR aucCRCHi[] = {
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
0x00, 0xC1, 0x81, 0x40
};
static const UCHAR aucCRCLo[] = {
0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6, 0x06, 0x07, 0xC7,
0x05, 0xC5, 0xC4, 0x04, 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E,
0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09, 0x08, 0xC8, 0xD8, 0x18, 0x19, 0xD9,
0x1B, 0xDB, 0xDA, 0x1A, 0x1E, 0xDE, 0xDF, 0x1F, 0xDD, 0x1D, 0x1C, 0xDC,
0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6, 0xD2, 0x12, 0x13, 0xD3,
0x11, 0xD1, 0xD0, 0x10, 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32,
0x36, 0xF6, 0xF7, 0x37, 0xF5, 0x35, 0x34, 0xF4, 0x3C, 0xFC, 0xFD, 0x3D,
0xFF, 0x3F, 0x3E, 0xFE, 0xFA, 0x3A, 0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38,
0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA, 0xEE, 0x2E, 0x2F, 0xEF,
0x2D, 0xED, 0xEC, 0x2C, 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26,
0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60, 0x61, 0xA1,
0x63, 0xA3, 0xA2, 0x62, 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4,
0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F, 0x6E, 0xAE, 0xAA, 0x6A, 0x6B, 0xAB,
0x69, 0xA9, 0xA8, 0x68, 0x78, 0xB8, 0xB9, 0x79, 0xBB, 0x7B, 0x7A, 0xBA,
0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C, 0xB4, 0x74, 0x75, 0xB5,
0x77, 0xB7, 0xB6, 0x76, 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0,
0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92, 0x96, 0x56, 0x57, 0x97,
0x55, 0x95, 0x94, 0x54, 0x9C, 0x5C, 0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E,
0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98, 0x88, 0x48, 0x49, 0x89,
0x4B, 0x8B, 0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C,
0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83,
0x41, 0x81, 0x80, 0x40
};
USHORT
usMBCRC16( UCHAR * pucFrame, USHORT usLen )
{
UCHAR ucCRCHi = 0xFF;
UCHAR ucCRCLo = 0xFF;
int iIndex;
while( usLen-- )
{
iIndex = ucCRCLo ^ *( pucFrame++ );
ucCRCLo = ( UCHAR )( ucCRCHi ^ aucCRCHi[iIndex] );
ucCRCHi = aucCRCLo[iIndex];
}
return ( USHORT )( ucCRCHi << 8 | ucCRCLo );
}
components/net/freemodbus/modbus/rtu/mbcrc.h 已删除 100644 → 0
浏览文件 @ 056228cc
/*
* FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
* Copyright (c) 2006 Christian Walter <wolti@sil.at>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: mbcrc.h,v 1.5 2006/12/07 22:10:34 wolti Exp $
*/
#ifndef _MB_CRC_H
#define _MB_CRC_H
USHORT usMBCRC16( UCHAR * pucFrame, USHORT usLen );
#endif
components/net/freemodbus/modbus/rtu/mbrtu.c 已删除 100644 → 0
浏览文件 @ 056228cc
此差异已折叠。
components/net/freemodbus/modbus/rtu/mbrtu.h 已删除 100644 → 0
浏览文件 @ 056228cc
此差异已折叠。
components/net/freemodbus/modbus/tcp/mbtcp.c 已删除 100644 → 0
浏览文件 @ 056228cc
此差异已折叠。
components/net/freemodbus/modbus/tcp/mbtcp.h 已删除 100644 → 0
浏览文件 @ 056228cc
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或