Skip to content

R
rt-thread

lfmiao0 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 53dea16e 编写于 作者: T thread-liu
浏览文件
操作

[update] sdio wifi.

上级 0a54f4c3
隐藏空白更改
内联 并排
Showing with 385 addition and 46 deletion
bsp/stm32/libraries/STM32MPxx_HAL/SConscript
浏览文件 @ 53dea16e
......@@ -119,6 +119,10 @@ if GetDepend(['BSP_USING_CRYP']):
src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cryp.c']
src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_cryp_ex.c']
if GetDepend(['BSP_USING_RTC']):
src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rtc.c']
src += ['STM32MP1xx_HAL_Driver/Src/stm32mp1xx_hal_rtc_ex.c']
path = [cwd + '/STM32MP1xx_HAL_Driver/Inc',
cwd + '/CMSIS/Device/ST/STM32MP1xx/Include',
cwd + '/CMSIS/Core/Include',
......
bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Inc/stm32mp1xx_hal_conf.h
浏览文件 @ 53dea16e
......@@ -60,7 +60,7 @@
#define HAL_SAI_MODULE_ENABLED
#define HAL_SD_MODULE_ENABLED
/*#define HAL_MMC_MODULE_ENABLED */
/*#define HAL_RTC_MODULE_ENABLED */
#define HAL_RTC_MODULE_ENABLED
/*#define HAL_SMBUS_MODULE_ENABLED */
/*#define HAL_SPDIFRX_MODULE_ENABLED */
#define HAL_SPI_MODULE_ENABLED
......
bsp/stm32/stm32mp157a-st-discovery/board/CubeMX_Config/CM4/Src/stm32mp1xx_hal_msp.c
浏览文件 @ 53dea16e
......@@ -1003,7 +1003,66 @@ void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
/* USER CODE END SDMMC1_MspInit 1 */
}
if(hsd->Instance==SDMMC2)
{
/* USER CODE BEGIN SDMMC2_MspInit 0 */
if (IS_ENGINEERING_BOOT_MODE())
{
/** Initializes the peripherals clock
*/
PeriphClkInit.Sdmmc12ClockSelection = RCC_SDMMC12CLKSOURCE_PLL4;
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_SDMMC12;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
}
/* USER CODE END SDMMC2_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SDMMC2_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
/**SDMMC2 GPIO Configuration
PB14 ------> SDMMC2_D0
PB15 ------> SDMMC2_D1
PB3 ------> SDMMC2_D2
PB4 ------> SDMMC2_D3
PE3 ------> SDMMC2_CK
PG6 ------> SDMMC2_CMD
*/
GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_14|GPIO_PIN_15;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF9_SDIO2;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF9_SDIO2;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_6;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_SDIO2;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
__HAL_RCC_SDMMC2_FORCE_RESET();
__HAL_RCC_SDMMC2_RELEASE_RESET();
/* SDMMC2 interrupt Init */
HAL_NVIC_SetPriority(SDMMC2_IRQn, 2, 0);
HAL_NVIC_EnableIRQ(SDMMC2_IRQn);
/* USER CODE BEGIN SDMMC2_MspInit 1 */
/* USER CODE END SDMMC2_MspInit 1 */
}
}
/**
......@@ -1312,6 +1371,65 @@ void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef* hcryp)
}
#endif
/**
* @brief RTC MSP Initialization
* This function configures the hardware resources used in this example
* @param hrtc: RTC handle pointer
* @retval None
*/
void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
{
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
if(hrtc->Instance==RTC)
{
/* USER CODE BEGIN SDMMC1_MspInit 0 */
if (IS_ENGINEERING_BOOT_MODE())
{
/** Initializes the peripherals clock
*/
PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
}
/* USER CODE BEGIN RTC_MspInit 0 */
/* USER CODE END RTC_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_RTC_ENABLE();
/* USER CODE BEGIN RTC_MspInit 1 */
/* USER CODE END RTC_MspInit 1 */
}
}
/**
* @brief RTC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hrtc: RTC handle pointer
* @retval None
*/
void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
{
if(hrtc->Instance==RTC)
{
/* USER CODE BEGIN RTC_MspDeInit 0 */
/* USER CODE END RTC_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_RTC_DISABLE();
/* USER CODE BEGIN RTC_MspDeInit 1 */
/* USER CODE END RTC_MspDeInit 1 */
}
}
/**
* @brief This function is executed in case of error occurrence.
* @retval None
......
bsp/stm32/stm32mp157a-st-discovery/board/Kconfig
浏览文件 @ 53dea16e
......@@ -58,10 +58,23 @@ menu "Onboard Peripheral Drivers"
select RT_USING_LWIP
config BSP_USING_SDMMC
bool "Enable SDMMC (SD card)"
bool "Enable SDMMC (sd card or sdio wifi)"
default n
select RT_USING_SDIO
select RT_USING_DFS
select RT_USING_DFS_ELMFAT
if BSP_USING_SDMMC
config BSP_USING_SDIO1
bool "Enable SDIO1 (sd card)"
default n
config BSP_USING_SDIO2
select BSP_USING_RTC
bool "Enable SDIO2 (sdio wifi)"
default n
endif
config BSP_USING_RTC
bool "Enable RTC"
default n
menuconfig BSP_USING_AUDIO
......
bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_sdio.c
浏览文件 @ 53dea16e
......@@ -10,11 +10,17 @@
#include "board.h"
#include "drv_sdio.h"
#ifdef BSP_USING_SDIO1
#include <dfs_fs.h>
#endif
#ifdef BSP_USING_SDMMC
//#define DRV_DEBUG
#ifdef BSP_USING_SDIO2
#define DRV_DEBUG
#endif
#define DBG_TAG "drv.sdio"
#ifdef DRV_DEBUG
#define DBG_LVL DBG_LOG
......@@ -23,8 +29,9 @@
#endif /* DRV_DEBUG */
#include <rtdbg.h>
static SD_HandleTypeDef hsd;
static struct rt_mmcsd_host *host;
static struct rt_mmcsd_host *host1;
static struct rt_mmcsd_host *host2;
#define SDIO_TX_RX_COMPLETE_TIMEOUT_LOOPS (100000)
#define RTHW_SDIO_LOCK(_sdio) rt_mutex_take(&_sdio->mutex, RT_WAITING_FOREVER)
......@@ -47,13 +54,14 @@ struct rthw_sdio
};
/* SYSRAM SDMMC1/2 accesses */
#define SDCARD_ADDR 0x2FFC0000
#if defined(__CC_ARM) || defined(__CLANG_ARM)
rt_uint8_t cache_buf[SDIO_BUFF_SIZE] __attribute__((at(0x2FFC0000)));
__attribute__((at(SDCARD_ADDR))) static rt_uint8_t cache_buf[SDIO_BUFF_SIZE];
#elif defined ( __GNUC__ )
static rt_uint8_t cache_buf[SDIO_BUFF_SIZE] __attribute__((section(".SdCardSection")));
#elif defined(__ICCARM__)
#pragma location=0x2FFC0000
rt_uint8_t cache_buf[SDIO_BUFF_SIZE];
#elif defined(__GNUC__)
rt_uint8_t cache_buf[SDIO_BUFF_SIZE] __attribute__((at(0x2FFC0000)));
#pragma location = SDCARD_ADDR
__no_init static rt_uint8_t cache_buf[SDIO_BUFF_SIZE];
#endif
/**
......@@ -461,10 +469,20 @@ struct rt_mmcsd_host *sdio_host_create(struct stm32_sdio_des *sdio_des)
rt_memcpy(&sdio->sdio_des, sdio_des, sizeof(struct stm32_sdio_des));
sdio->sdio_des.hw_sdio = (struct stm32_sdio *)SDIO_BASE_ADDRESS;
if(sdio_des->hsd.Instance == SDMMC1)
{
sdio->sdio_des.hw_sdio = (struct stm32_sdio *)SDIO1_BASE_ADDRESS;
rt_event_init(&sdio->event, "sdio1", RT_IPC_FLAG_FIFO);
rt_mutex_init(&sdio->mutex, "sdio1", RT_IPC_FLAG_FIFO);
}
if(sdio_des->hsd.Instance == SDMMC2)
{
sdio->sdio_des.hw_sdio = (struct stm32_sdio *)SDIO2_BASE_ADDRESS;
rt_event_init(&sdio->event, "sdio2", RT_IPC_FLAG_FIFO);
rt_mutex_init(&sdio->mutex, "sdio2", RT_IPC_FLAG_FIFO);
}
rt_event_init(&sdio->event, "sdio", RT_IPC_FLAG_FIFO);
rt_mutex_init(&sdio->mutex, "sdio", RT_IPC_FLAG_FIFO);
/* set host default attributes */
host->ops = &ops;
host->freq_min = 400 * 1000;
......@@ -503,29 +521,83 @@ void SDMMC1_IRQHandler(void)
{
rt_interrupt_enter();
/* Process All SDIO Interrupt Sources */
rthw_sdio_irq_process(host);
rthw_sdio_irq_process(host1);
rt_interrupt_leave();
}
void SDMMC2_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
/* Process All SDIO Interrupt Sources */
rthw_sdio_irq_process(host2);
/* leave interrupt */
rt_interrupt_leave();
}
#ifdef BSP_USING_SDIO2
static RTC_HandleTypeDef hrtc;
static void MX_RTC_Init(void)
{
hrtc.Instance = RTC;
hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
hrtc.Init.AsynchPrediv = 127;
hrtc.Init.SynchPrediv = 255;
hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
hrtc.Instance->CFGR = 0x02 << 1;
if (HAL_RTC_Init(&hrtc) != HAL_OK)
{
Error_Handler();
}
}
static int LBEE5KL1DX_init(void)
{
#define LBEE5KL1DX_WL_REG_ON GET_PIN(H, 4)
/* enable the WLAN REG pin */
rt_pin_mode(LBEE5KL1DX_WL_REG_ON, PIN_MODE_OUTPUT);
rt_pin_write(LBEE5KL1DX_WL_REG_ON, PIN_HIGH);
return 0;
}
#endif
int rt_hw_sdio_init(void)
{
struct stm32_sdio_des sdio_des;
hsd.Instance = SDMMC1;
HAL_SD_MspInit(&hsd);
#ifdef BSP_USING_SDIO1
struct stm32_sdio_des sdio_des1;
sdio_des1.hsd.Instance = SDMMC1;
HAL_SD_MspInit(&sdio_des1.hsd);
host = sdio_host_create(&sdio_des);
if (host == RT_NULL)
host1 = sdio_host_create(&sdio_des1);
if (host1 == RT_NULL)
{
LOG_E("host create fail");
return RT_NULL;
}
#endif
#ifdef BSP_USING_SDIO2
MX_RTC_Init();
LBEE5KL1DX_init();
struct stm32_sdio_des sdio_des2;
sdio_des2.hsd.Instance = SDMMC2;
HAL_SD_MspInit(&sdio_des2.hsd);
host2 = sdio_host_create(&sdio_des2);
if (host2 == RT_NULL)
{
LOG_E("host2 create fail");
return RT_NULL;
}
#endif
return RT_EOK;
}
INIT_DEVICE_EXPORT(rt_hw_sdio_init);
#ifdef BSP_USING_SDIO1
int mnt_init(void)
{
rt_device_t sd = RT_NULL;
......@@ -552,4 +624,6 @@ int mnt_init(void)
}
INIT_ENV_EXPORT(mnt_init);
#endif /* BSP_USING_SDIO1 */
#endif /* BSP_USING_SDMMC */
bsp/stm32/stm32mp157a-st-discovery/board/ports/drv_sdio.h
浏览文件 @ 53dea16e
......@@ -19,11 +19,12 @@
#include <drivers/mmcsd_core.h>
#include <drivers/sdio.h>
#define SDIO_BUFF_SIZE 4096
#define SDIO_ALIGN_LEN 32
#ifndef SDIO1_BASE_ADDRESS
#define SDIO1_BASE_ADDRESS (SDMMC1)
#endif
#ifndef SDIO_BASE_ADDRESS
#define SDIO_BASE_ADDRESS (SDMMC1)
#ifndef SDIO2_BASE_ADDRESS
#define SDIO2_BASE_ADDRESS (SDMMC2)
#endif
#ifndef SDIO_CLOCK_FREQ
......@@ -39,7 +40,7 @@
#endif
#ifndef SDIO_MAX_FREQ
#define SDIO_MAX_FREQ (50 * 1000 * 1000)
#define SDIO_MAX_FREQ (25 * 1000 * 1000)
#endif
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
......@@ -102,6 +103,7 @@ struct stm32_sdio_des
{
struct stm32_sdio *hw_sdio;
sdio_clk_get clk_get;
SD_HandleTypeDef hsd;
};
/* stm32 sdio dirver class */
......
bsp/stm32/stm32mp157a-st-discovery/project.ewp
浏览文件 @ 53dea16e
......@@ -232,6 +232,8 @@
<state>STM32MP157Axx</state>
<state>__LOG_TRACE_IO_</state>
<state>__RTTHREAD__</state>
<state>RT_USING_DLIBC</state>
<state>_DLIB_FILE_DESCRIPTOR</state>
<state>USE_HAL_DRIVER</state>
</option>
<option>
......@@ -358,23 +360,28 @@
<option>
<name>CCIncludePath2</name>
<state />
<state>$PROJ_DIR$\..\..\..\components\dfs\filesystems\devfs</state>
<state>$PROJ_DIR$\..\..\..\components\finsh</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
<state>$PROJ_DIR$\board\CubeMX_Config\CM4\Inc</state>
<state>$PROJ_DIR$\board\ports</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Core\Include</state>
<state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Inc</state>
<state>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib</state>
<state>$PROJ_DIR$\board\ports\audio</state>
<state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
<state>$PROJ_DIR$\.</state>
<state>$PROJ_DIR$\applications</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Core\Include</state>
<state>$PROJ_DIR$\board\CubeMX_Config\CM4\Inc</state>
<state>$PROJ_DIR$\..\..\..\components\dfs\include</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
<state>$PROJ_DIR$\board</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
<state>$PROJ_DIR$\board\ports</state>
<state>$PROJ_DIR$\applications</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Include</state>
<state>$PROJ_DIR$\board\ports\audio</state>
<state>$PROJ_DIR$\..\..\..\components\dfs\filesystems\elmfat</state>
<state>$PROJ_DIR$\..\..\..\include</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Include</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Inc</state>
</option>
<option>
<name>CCStdIncCheck</name>
......@@ -1309,6 +1316,8 @@
<state>STM32MP157Axx</state>
<state>__LOG_TRACE_IO_</state>
<state>__RTTHREAD__</state>
<state>RT_USING_DLIBC</state>
<state>_DLIB_FILE_DESCRIPTOR</state>
<state>USE_HAL_DRIVER</state>
</option>
<option>
......@@ -1435,23 +1444,28 @@
<option>
<name>CCIncludePath2</name>
<state />
<state>$PROJ_DIR$\..\..\..\components\dfs\filesystems\devfs</state>
<state>$PROJ_DIR$\..\..\..\components\finsh</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
<state>$PROJ_DIR$\board\CubeMX_Config\CM4\Inc</state>
<state>$PROJ_DIR$\board\ports</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Core\Include</state>
<state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Inc</state>
<state>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib</state>
<state>$PROJ_DIR$\board\ports\audio</state>
<state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
<state>$PROJ_DIR$\.</state>
<state>$PROJ_DIR$\applications</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Core\Include</state>
<state>$PROJ_DIR$\board\CubeMX_Config\CM4\Inc</state>
<state>$PROJ_DIR$\..\..\..\components\dfs\include</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
<state>$PROJ_DIR$\board</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
<state>$PROJ_DIR$\board\ports</state>
<state>$PROJ_DIR$\applications</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Include</state>
<state>$PROJ_DIR$\board\ports\audio</state>
<state>$PROJ_DIR$\..\..\..\components\dfs\filesystems\elmfat</state>
<state>$PROJ_DIR$\..\..\..\include</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Include</state>
<state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
<state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
<state>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Inc</state>
</option>
<option>
<name>CCStdIncCheck</name>
......@@ -2183,6 +2197,21 @@
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\sdio\block_dev.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\sdio\mmcsd_core.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\sdio\sd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\sdio\sdio.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\sdio\mmc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>
</file>
......@@ -2219,6 +2248,9 @@
<file>
<name>$PROJ_DIR$\board\CubeMX_Config\CM4\Src\stm32mp1xx_hal_msp.c</name>
</file>
<file>
<name>$PROJ_DIR$\board\ports\drv_sdio.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\CMSIS\Device\ST\STM32MP1xx\Source\Templates\iar\startup_stm32mp15xx.s</name>
</file>
......@@ -2232,6 +2264,39 @@
<name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>
</file>
</group>
<group>
<name>Filesystem</name>
<file>
<name>$PROJ_DIR$\..\..\..\components\dfs\src\dfs.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\dfs\src\dfs_file.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\dfs\src\dfs_fs.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\dfs\src\dfs_posix.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\dfs\src\poll.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\dfs\src\select.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\dfs\filesystems\devfs\devfs.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\dfs\filesystems\elmfat\dfs_elm.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\dfs\filesystems\elmfat\ff.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\dfs\filesystems\elmfat\ffunicode.c</name>
</file>
</group>
<group>
<name>finsh</name>
<file>
......@@ -2243,6 +2308,9 @@
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\msh_file.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\finsh\finsh_compiler.c</name>
</file>
......@@ -2309,9 +2377,6 @@
<file>
<name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\signal.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\src\thread.c</name>
</file>
......@@ -2319,6 +2384,54 @@
<name>$PROJ_DIR$\..\..\..\src\timer.c</name>
</file>
</group>
<group>
<name>libc</name>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\common\stdlib.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\common\time.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\common\unistd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\environ.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\libc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\rmtx.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\stdio.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_close.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_lseek.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_mem.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_open.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_read.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_remove.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_write.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscalls.c</name>
</file>
</group>
<group>
<name>Libraries</name>
<file>
......@@ -2393,5 +2506,20 @@
<file>
<name>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_uart_ex.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_ll_sdmmc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_sd.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_ll_delayblock.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_rtc.c</name>
</file>
<file>
<name>$PROJ_DIR$\..\libraries\STM32MPxx_HAL\STM32MP1xx_HAL_Driver\Src\stm32mp1xx_hal_rtc_ex.c</name>
</file>
</group>
</project>
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或