Merge pull request #4266 from mysterywolf/bluepill

[stm32][bluepill] add the function of MDK simulator & update MDK5 project template

bsp/stm32/stm32f103-blue-pill/.config

@@ -52,6 +52,7 @@ CONFIG_RT_USING_MEMPOOL=y
 # CONFIG_RT_USING_NOHEAP is not set
 CONFIG_RT_USING_SMALL_MEM=y
 # CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_USERHEAP is not set
 # CONFIG_RT_USING_MEMTRACE is not set
 CONFIG_RT_USING_HEAP=y
 
@@ -64,8 +65,9 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
-CONFIG_RT_VER_NUM=0x40001
+CONFIG_RT_VER_NUM=0x40003
 CONFIG_ARCH_ARM=y
+CONFIG_RT_USING_CPU_FFS=y
 CONFIG_ARCH_ARM_CORTEX_M=y
 CONFIG_ARCH_ARM_CORTEX_M3=y
 # CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
@@ -120,12 +122,13 @@ CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_CPUTIME is not set
 # CONFIG_RT_USING_I2C is not set
+# CONFIG_RT_USING_PHY is not set
 CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_DAC is not set
 # CONFIG_RT_USING_PWM is not set
 # CONFIG_RT_USING_MTD_NOR is not set
 # CONFIG_RT_USING_MTD_NAND is not set
-# CONFIG_RT_USING_MTD is not set
 # CONFIG_RT_USING_PM is not set
 # CONFIG_RT_USING_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
@@ -133,10 +136,10 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_WDT is not set
 # CONFIG_RT_USING_AUDIO is not set
 # CONFIG_RT_USING_SENSOR is not set
-
-#
-# Using WiFi
-#
+# CONFIG_RT_USING_TOUCH is not set
+# CONFIG_RT_USING_HWCRYPTO is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
 # CONFIG_RT_USING_WIFI is not set
 
 #
@@ -150,6 +153,7 @@ CONFIG_RT_USING_PIN=y
 #
 # CONFIG_RT_USING_LIBC is not set
 # CONFIG_RT_USING_PTHREADS is not set
+CONFIG_RT_LIBC_USING_TIME=y
 
 #
 # Network
@@ -161,14 +165,14 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_SAL is not set
 
 #
-# light weight TCP/IP stack
+# Network interface device
 #
-# CONFIG_RT_USING_LWIP is not set
+# CONFIG_RT_USING_NETDEV is not set
 
 #
-# Modbus master and slave stack
+# light weight TCP/IP stack
 #
-# CONFIG_RT_USING_MODBUS is not set
+# CONFIG_RT_USING_LWIP is not set
 
 #
 # AT commands
@@ -183,7 +187,6 @@ CONFIG_RT_USING_PIN=y
 #
 # Utilities
 #
-# CONFIG_RT_USING_LOGTRACE is not set
 # CONFIG_RT_USING_RYM is not set
 # CONFIG_RT_USING_ULOG is not set
 # CONFIG_RT_USING_UTEST is not set
@@ -196,12 +199,20 @@ CONFIG_RT_USING_PIN=y
 #
 # IoT - internet of things
 #
+# CONFIG_PKG_USING_LORAWAN_DRIVER is not set
 # CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_UMQTT is not set
 # CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_WEBNET is not set
 # CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
+# CONFIG_PKG_USING_KAWAII_MQTT is not set
+# CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
 # CONFIG_PKG_USING_CJSON is not set
 # CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_LIBMODBUS is not set
+# CONFIG_PKG_USING_FREEMODBUS is not set
 # CONFIG_PKG_USING_LJSON is not set
 # CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_NANOPB is not set
@@ -219,10 +230,15 @@ CONFIG_RT_USING_PIN=y
 # Wiced WiFi
 #
 # CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_RW007 is not set
 # CONFIG_PKG_USING_COAP is not set
 # CONFIG_PKG_USING_NOPOLL is not set
 # CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_CMUX is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
 # CONFIG_PKG_USING_AT_DEVICE is not set
+# CONFIG_PKG_USING_ATSRV_SOCKET is not set
+# CONFIG_PKG_USING_WIZNET is not set
 
 #
 # IoT Cloud
@@ -231,6 +247,34 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_GAGENT_CLOUD is not set
 # CONFIG_PKG_USING_ALI_IOTKIT is not set
 # CONFIG_PKG_USING_AZURE is not set
+# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
+# CONFIG_PKG_USING_JOYLINK is not set
+# CONFIG_PKG_USING_NIMBLE is not set
+# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
+# CONFIG_PKG_USING_IPMSG is not set
+# CONFIG_PKG_USING_LSSDP is not set
+# CONFIG_PKG_USING_AIRKISS_OPEN is not set
+# CONFIG_PKG_USING_LIBRWS is not set
+# CONFIG_PKG_USING_TCPSERVER is not set
+# CONFIG_PKG_USING_PROTOBUF_C is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
+# CONFIG_PKG_USING_LIBCURL2RTT is not set
+# CONFIG_PKG_USING_CAPNP is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_AGILE_TELNET is not set
+# CONFIG_PKG_USING_NMEALIB is not set
+# CONFIG_PKG_USING_AGILE_JSMN is not set
+# CONFIG_PKG_USING_PDULIB is not set
+# CONFIG_PKG_USING_BTSTACK is not set
+# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
+# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
 
 #
 # security packages
@@ -238,6 +282,8 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_libsodium is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
+# CONFIG_PKG_USING_TFM is not set
+# CONFIG_PKG_USING_YD_CRYPTO is not set
 
 #
 # language packages
@@ -251,6 +297,12 @@ CONFIG_RT_USING_PIN=y
 #
 # CONFIG_PKG_USING_OPENMV is not set
 # CONFIG_PKG_USING_MUPDF is not set
+# CONFIG_PKG_USING_STEMWIN is not set
+# CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
+# CONFIG_PKG_USING_HELIX is not set
+# CONFIG_PKG_USING_AZUREGUIX is not set
+# CONFIG_PKG_USING_TOUCHGFX2RTT is not set
 
 #
 # tools packages
@@ -259,6 +311,27 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_EASYFLASH is not set
 # CONFIG_PKG_USING_EASYLOGGER is not set
 # CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_RDB is not set
+# CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ULOG_FILE is not set
+# CONFIG_PKG_USING_LOGMGR is not set
+# CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_MEMORYPERF is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
+# CONFIG_PKG_USING_GPS_RMC is not set
+# CONFIG_PKG_USING_URLENCODE is not set
+# CONFIG_PKG_USING_UMCN is not set
+# CONFIG_PKG_USING_LWRB2RTT is not set
+# CONFIG_PKG_USING_CPU_USAGE is not set
+# CONFIG_PKG_USING_GBK2UTF8 is not set
+# CONFIG_PKG_USING_VCONSOLE is not set
+# CONFIG_PKG_USING_KDB is not set
 
 #
 # system packages
@@ -269,20 +342,98 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_LWEXT4 is not set
 # CONFIG_PKG_USING_PARTITION is not set
 # CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_FLASHDB is not set
 # CONFIG_PKG_USING_SQLITE is not set
 # CONFIG_PKG_USING_RTI is not set
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+# CONFIG_PKG_USING_CMSIS is not set
+# CONFIG_PKG_USING_DFS_YAFFS is not set
+# CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_THREAD_POOL is not set
+# CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
+# CONFIG_PKG_USING_SYSWATCH is not set
+# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
+# CONFIG_PKG_USING_PLCCORE is not set
+# CONFIG_PKG_USING_RAMDISK is not set
+# CONFIG_PKG_USING_MININI is not set
+# CONFIG_PKG_USING_QBOOT is not set
+
+#
+# Micrium: Micrium software products porting for RT-Thread
+#
+# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
+# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
+# CONFIG_PKG_USING_UC_CRC is not set
+# CONFIG_PKG_USING_UC_CLK is not set
+# CONFIG_PKG_USING_UC_COMMON is not set
+# CONFIG_PKG_USING_UC_MODBUS is not set
+# CONFIG_PKG_USING_PPOOL is not set
+# CONFIG_PKG_USING_OPENAMP is not set
+# CONFIG_PKG_USING_RT_PRINTF is not set
+# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
 
 #
 # peripheral libraries and drivers
 #
-# CONFIG_PKG_USING_STM32F4_HAL is not set
-# CONFIG_PKG_USING_STM32F4_DRIVERS is not set
+# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
-# CONFIG_PKG_USING_AHT10 is not set
-# CONFIG_PKG_USING_AP3216C is not set
+# CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_AS7341 is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_ICM20608 is not set
+# CONFIG_PKG_USING_U8G2 is not set
+# CONFIG_PKG_USING_BUTTON is not set
+# CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_SX12XX is not set
+# CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_LITTLED is not set
+# CONFIG_PKG_USING_LKDGUI is not set
+# CONFIG_PKG_USING_NRF5X_SDK is not set
+# CONFIG_PKG_USING_NRFX is not set
+# CONFIG_PKG_USING_WM_LIBRARIES is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
+# CONFIG_PKG_USING_AT24CXX is not set
+# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
+# CONFIG_PKG_USING_AD7746 is not set
+# CONFIG_PKG_USING_PCA9685 is not set
+# CONFIG_PKG_USING_I2C_TOOLS is not set
+# CONFIG_PKG_USING_NRF24L01 is not set
+# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
+# CONFIG_PKG_USING_RC522 is not set
+# CONFIG_PKG_USING_WS2812B is not set
+# CONFIG_PKG_USING_EMBARC_BSP is not set
+# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
+# CONFIG_PKG_USING_MULTI_RTIMER is not set
+# CONFIG_PKG_USING_MAX7219 is not set
+# CONFIG_PKG_USING_BEEP is not set
+# CONFIG_PKG_USING_EASYBLINK is not set
+# CONFIG_PKG_USING_PMS_SERIES is not set
+# CONFIG_PKG_USING_CAN_YMODEM is not set
+# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set
+# CONFIG_PKG_USING_QLED is not set
+# CONFIG_PKG_USING_PAJ7620 is not set
+# CONFIG_PKG_USING_AGILE_CONSOLE is not set
+# CONFIG_PKG_USING_LD3320 is not set
+# CONFIG_PKG_USING_WK2124 is not set
+# CONFIG_PKG_USING_LY68L6400 is not set
+# CONFIG_PKG_USING_DM9051 is not set
+# CONFIG_PKG_USING_SSD1306 is not set
+# CONFIG_PKG_USING_QKEY is not set
+# CONFIG_PKG_USING_RS485 is not set
+# CONFIG_PKG_USING_NES is not set
+# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
+# CONFIG_PKG_USING_VDEVICE is not set
+# CONFIG_PKG_USING_SGM706 is not set
 
 #
 # miscellaneous packages
@@ -292,14 +443,17 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_FASTLZ is not set
 # CONFIG_PKG_USING_MINILZO is not set
 # CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_LZMA is not set
 # CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
 # CONFIG_PKG_USING_CANFESTIVAL is not set
 # CONFIG_PKG_USING_ZLIB is not set
 # CONFIG_PKG_USING_DSTR is not set
-
-#
-# sample package
-#
+# CONFIG_PKG_USING_TINYFRAME is not set
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
 
 #
 # samples: kernel and components samples
@@ -308,11 +462,28 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
 # CONFIG_PKG_USING_NETWORK_SAMPLES is not set
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
-
-#
-# example package: hello
-#
 # CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_KI is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_CRCLIB is not set
+
+#
+# games: games run on RT-Thread console
+#
+# CONFIG_PKG_USING_THREES is not set
+# CONFIG_PKG_USING_2048 is not set
+# CONFIG_PKG_USING_SNAKE is not set
+# CONFIG_PKG_USING_TETRIS is not set
+# CONFIG_PKG_USING_LWGPS is not set
+# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
+# CONFIG_PKG_USING_STATE_MACHINE is not set
 CONFIG_SOC_FAMILY_STM32=y
 CONFIG_SOC_SERIES_STM32F1=y
 
@@ -333,8 +504,12 @@ CONFIG_BSP_USING_GPIO=y
 CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
 CONFIG_BSP_UART1_RX_USING_DMA=y
+# CONFIG_BSP_USING_UART2 is not set
+# CONFIG_BSP_USING_ONCHIP_RTC is not set
 # CONFIG_BSP_USING_SPI is not set
 # CONFIG_BSP_USING_ADC is not set
+# CONFIG_BSP_USING_USBD is not set
+# CONFIG_BSP_USING_UDID is not set
 
 #
 # Board extended module Drivers

bsp/stm32/stm32f103-blue-pill/README.md

@@ -21,10 +21,10 @@ Video tutorial: https://www.youtube.com/watch?v=0PwBBYXQ08g
 
 ## 1 MCU Resources
 
-The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
+The STM32F103Cx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
 
 The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.
-The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.
+The STM32F103Cx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.
 These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.
 
 KEY FEATURES
@@ -76,7 +76,7 @@ KEY FEATURES
 
 ## 2 Onboard Resources
 
-- MCU：STM32F103C8T6 @72MHz, 64KB FLASH , 20KB RAM
+- MCU：STM32F103C8T6 @72MHz, 64KB FLASH (can be extended to 128KB) , 20KB RAM
 
 - Peripherals
   
@@ -199,6 +199,45 @@ These two videos will show you how to use PuTTy:
 
 
 
+### 3.7 Peripheral Condition
+
+Each peripheral supporting condition for this BSP is as follows:
+
+| **On-board Peripherals** | **Support** | **Remark**                                                   |
+| ------------------------ | ----------- | ------------------------------------------------------------ |
+| LED                      | √           | PC13                                                         |
+| USB Virtual Serial Port  | √           | USB CDC                                                      |
+| **On-chip Peripherals**  | **Support** | **Remark**                                                   |
+| GPIO                     | √           |                                                              |
+| UART                     | √           | USART1 / USART2                                              |
+| SPI                      | √           | SPI1                                                         |
+| I2C                      | √           | software simulate                                            |
+| USB                      | √           | USB Device                                                   |
+| ADC                      | √           | ADC1 IN1                                                     |
+| RTC                      | √           | Support for external crystal oscillator and internal low-speed clocks |
+| PWM                      |             |                                                              |
+| FLASH                    |             |                                                              |
+| IWG                      |             |                                                              |
+| UID                      | √           | STM32 Unique Device Identifier                               |
+
+
+
+### 3.8 MDK-Keil5 Simulator
+
+ If you haven't had a real Blue Pill Board yet, you may use MDK-Keil5 simulator to simulate to run RT-Thread on Blue Pill Board.
+
+![simulator1](figures/simulator1.png)
+
+
+
+![simulator2](figures/simulator2.jpg)
+
+
+
+![simulator3](figures/simulator3.png)
+
+
+
 ## 4 **Advanced Features**
 
 This BSP only enables GPIO and USART1 by default. If you need more advanced features such as SPI, ADC, or to add software packages, you need to configure the BSP with RT-Thread [ENV tool](https://www.rt-thread.io/download.html?download=Env), as follows:
@@ -214,35 +253,29 @@ Learn how to use RT-Thread ENV, click [Here](https://github.com/RT-Thread/rtthre
 
 ### 4.1 How to use USB virtual com as a console device
 
-#### 4.1.1 Step 1
-
-Enable USB device.
+**Step 1: Enable USB device.**
 
 ![usb_device1](figures/usb_device1.png)
 
 
 
-#### 4.1.2 Step 2
-
-Enable USB Device Driver and enable to use device as CDC device.
+**Step 2: Enable USB Device Driver and enable to use device as CDC device.**
 
 ![usb_device2](figures/usb_device2.png)
 
 
 
-#### 4.1.3 Step 3
-
-Select VC (virtual console) software package.
+**Step 3: Select vconsole (virtual console) software package.**
 
 ![vconsole](figures/vconsole.png)
 
 
 
-#### 4.1.4 Step 4
-
-Add these codes in main function which is located in 'Applications' folder, and don't forget to include `vconsole.h`.
+**Step 4: Add these codes in main function which is located in 'Applications' folder.**
 
 ```c
+#include <vconsole.h>
+
 rt_device_t dev = rt_device_find("vcom");
 vconsole_switch(dev);
 ```
@@ -251,9 +284,15 @@ vconsole_switch(dev);
 
 
 
-#### 4.1.5 Step 5
+**Step 5: Download the new program to your blue pill board.** 
+
+Re-plug the USB cable and you will find a new serial (virtual com, 115200, 8-N-1) device in your computer. Then, you can use the USB instead of the UART-USB adapter as a console and send commands through USB cable. If you reset or reboot the blue pill board, you'll still need to re-plug the USB cable. 
+
+
+
+### 4.2 How to extend Blue Pill board’s Flash space
 
-Download the new program to your blue pill board. Re-plug the USB cable and you will find a new serial (virtual com, 115200, 8-N-1) device in your computer. Then, you can use the USB instead of the UART-USB adapter as a console and send commands through USB cable. If you reset or reboot the blue pill board, you'll still need to re-plug the USB cable. 
+According to ST official datasheet, STM32F103C8 has 64KB of Flash. However, STM32F103C8 and STM32F103CB use the same type of silicon die, which means STM32F103C8 also has 128KB ROM in theory, but ST locked the high 64KB. Basically, to force the debugger to download program can unlock the high 64KB. There is a good news that **Keil5 will help you to unlock the Blue Pill Board high 64KB block** if you use Blue Pill Board BSP as a template to create your project. You just need to press the "Flash Download" button as usual. What you only need to remember is that Blue Pill board has 128KB of Flash rather than 64KB.
 
 
 

bsp/stm32/stm32f103-blue-pill/README_zh.md

@@ -41,10 +41,10 @@ STM32F103C8T6最小系统，采用SWD调试接口，可以用3个接口就能完
 本 BSP 目前对外设的支持情况如下：
 
 | **板载外设**      | **支持情况** | **备注**                              |
-| :----------------- | :----------: | :------------------------------------- |
+| :----------------- | :----------- | :------------------------------------- |
 | 	黄色LED		    |     支持      |       PC13                          |
 | **片上外设**      | **支持情况** | **备注**                              |
-| GPIO              |     支持     | PA0, PA1... PC15 ---> PIN: 0, 1...47 |
+| GPIO              |              |          |
 | UART              |     支持     | UART1                                |
 
 

bsp/stm32/stm32f103-blue-pill/applications/main.c

@@ -5,7 +5,7 @@
  *
  * Change Logs:
  * Date           Author       Notes
- * 2019-03-08     obito0   first version
+ * 2019-03-08     obito0       first version
  */
 
 #include <rtthread.h>

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/.mxproject

 [PreviousLibFiles]
-LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h;
+LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_exti.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rtc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armclang.h;Drivers/CMSIS/Include/cmsis_compiler.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/cmsis_iccarm.h;Drivers/CMSIS/Include/cmsis_version.h;Drivers/CMSIS/Include/core_armv8mbl.h;Drivers/CMSIS/Include/core_armv8mml.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm1.h;Drivers/CMSIS/Include/core_cm23.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm33.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/mpu_armv7.h;Drivers/CMSIS/Include/mpu_armv8.h;Drivers/CMSIS/Include/tz_context.h;
 
 [PreviousUsedKeilFiles]
-SourceFiles=..\Src\main.c;..\Src\stm32f1xx_it.c;..\Src\stm32f1xx_hal_msp.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;..\\Src/system_stm32f1xx.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;..\\Src/system_stm32f1xx.c;..\Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;;
+SourceFiles=..\Src\main.c;..\Src\stm32f1xx_it.c;..\Src\stm32f1xx_hal_msp.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;..\\Src/system_stm32f1xx.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_exti.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rtc_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;..\Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;..\\Src/system_stm32f1xx.c;..\Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;;
 HeaderPath=..\Drivers\STM32F1xx_HAL_Driver\Inc;..\Drivers\STM32F1xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F1xx\Include;..\Drivers\CMSIS\Include;..\Inc;
 CDefines=USE_HAL_DRIVER;STM32F103xB;USE_HAL_DRIVER;USE_HAL_DRIVER;
 
 [PreviousGenFiles]
-HeaderPath=E:/rt-thread/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Inc
+HeaderPath=C:/Users/92036/Desktop/bluepill/rtt_default_project_0/board/CubeMX_Config/Inc
 HeaderFiles=stm32f1xx_it.h;stm32f1xx_hal_conf.h;main.h;
-SourcePath=E:/rt-thread/bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src
+SourcePath=C:/Users/92036/Desktop/bluepill/rtt_default_project_0/board/CubeMX_Config/Src
 SourceFiles=stm32f1xx_it.c;stm32f1xx_hal_msp.c;main.c;
 

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/CubeMX_Config.ioc

 #MicroXplorer Configuration settings - do not modify
 ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_1
-ADC1.IPParameters=Rank-0\#ChannelRegularConversion,master,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag
+ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,master
 ADC1.NbrOfConversionFlag=1
 ADC1.Rank-0\#ChannelRegularConversion=1
 ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
@@ -11,32 +11,35 @@ Mcu.Family=STM32F1
 Mcu.IP0=ADC1
 Mcu.IP1=NVIC
 Mcu.IP2=RCC
-Mcu.IP3=SPI1
-Mcu.IP4=SYS
-Mcu.IP5=USART1
-Mcu.IP6=USART2
-Mcu.IP7=USB
-Mcu.IPNb=8
+Mcu.IP3=RTC
+Mcu.IP4=SPI1
+Mcu.IP5=SYS
+Mcu.IP6=USART1
+Mcu.IP7=USART2
+Mcu.IP8=USB
+Mcu.IPNb=9
 Mcu.Name=STM32F103C(8-B)Tx
 Mcu.Package=LQFP48
-Mcu.Pin0=PC14-OSC32_IN
-Mcu.Pin1=PC15-OSC32_OUT
-Mcu.Pin10=PA9
-Mcu.Pin11=PA10
-Mcu.Pin12=PA11
-Mcu.Pin13=PA12
-Mcu.Pin14=PA13
-Mcu.Pin15=PA14
-Mcu.Pin16=VP_SYS_VS_Systick
-Mcu.Pin2=PD0-OSC_IN
-Mcu.Pin3=PD1-OSC_OUT
-Mcu.Pin4=PA1
-Mcu.Pin5=PA2
-Mcu.Pin6=PA3
-Mcu.Pin7=PA5
-Mcu.Pin8=PA6
-Mcu.Pin9=PA7
-Mcu.PinsNb=17
+Mcu.Pin0=PC13-TAMPER-RTC
+Mcu.Pin1=PC14-OSC32_IN
+Mcu.Pin10=PA7
+Mcu.Pin11=PA9
+Mcu.Pin12=PA10
+Mcu.Pin13=PA11
+Mcu.Pin14=PA12
+Mcu.Pin15=PA13
+Mcu.Pin16=PA14
+Mcu.Pin17=VP_RTC_VS_RTC_Activate
+Mcu.Pin18=VP_SYS_VS_Systick
+Mcu.Pin2=PC15-OSC32_OUT
+Mcu.Pin3=PD0-OSC_IN
+Mcu.Pin4=PD1-OSC_OUT
+Mcu.Pin5=PA1
+Mcu.Pin6=PA2
+Mcu.Pin7=PA3
+Mcu.Pin8=PA5
+Mcu.Pin9=PA6
+Mcu.PinsNb=19
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F103C8Tx
@@ -76,6 +79,12 @@ PA7.Mode=Full_Duplex_Master
 PA7.Signal=SPI1_MOSI
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
+PC13-TAMPER-RTC.GPIOParameters=GPIO_Speed,PinState,GPIO_ModeDefaultOutputPP
+PC13-TAMPER-RTC.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_PP
+PC13-TAMPER-RTC.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PC13-TAMPER-RTC.Locked=true
+PC13-TAMPER-RTC.PinState=GPIO_PIN_SET
+PC13-TAMPER-RTC.Signal=GPIO_Output
 PC14-OSC32_IN.Mode=LSE-External-Oscillator
 PC14-OSC32_IN.Signal=RCC_OSC32_IN
 PC15-OSC32_OUT.Mode=LSE-External-Oscillator
@@ -112,7 +121,7 @@ ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=MDK-ARM V5
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true,6-MX_USB_PCD_Init-USB-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true,6-MX_USB_PCD_Init-USB-false-HAL-true,7-MX_USART2_UART_Init-USART2-false-HAL-true,8-MX_RTC_Init-RTC-false-HAL-true
 RCC.ADCFreqValue=12000000
 RCC.ADCPresc=RCC_ADCPCLK2_DIV6
 RCC.AHBFreq_Value=72000000
@@ -148,6 +157,8 @@ USART1.IPParameters=VirtualMode
 USART1.VirtualMode=VM_ASYNC
 USART2.IPParameters=VirtualMode
 USART2.VirtualMode=VM_ASYNC
+VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
+VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
 VP_SYS_VS_Systick.Mode=SysTick
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
 board=custom

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Inc/stm32f1xx_hal_conf.h

@@ -56,7 +56,7 @@
 /*#define HAL_HCD_MODULE_ENABLED   */
 /*#define HAL_PWR_MODULE_ENABLED   */
 /*#define HAL_RCC_MODULE_ENABLED   */
-/*#define HAL_RTC_MODULE_ENABLED   */
+#define HAL_RTC_MODULE_ENABLED
 /*#define HAL_SD_MODULE_ENABLED   */
 /*#define HAL_MMC_MODULE_ENABLED   */
 /*#define HAL_SDRAM_MODULE_ENABLED   */

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src/main.c

@@ -43,6 +43,8 @@
 /* Private variables ---------------------------------------------------------*/
 ADC_HandleTypeDef hadc1;
 
+RTC_HandleTypeDef hrtc;
+
 SPI_HandleTypeDef hspi1;
 
 UART_HandleTypeDef huart1;
@@ -62,6 +64,7 @@ static void MX_ADC1_Init(void);
 static void MX_SPI1_Init(void);
 static void MX_USB_PCD_Init(void);
 static void MX_USART2_UART_Init(void);
+static void MX_RTC_Init(void);
 /* USER CODE BEGIN PFP */
 
 /* USER CODE END PFP */
@@ -104,6 +107,7 @@ int main(void)
   MX_SPI1_Init();
   MX_USB_PCD_Init();
   MX_USART2_UART_Init();
+  MX_RTC_Init();
   /* USER CODE BEGIN 2 */
 
   /* USER CODE END 2 */
@@ -132,10 +136,11 @@ void SystemClock_Config(void)
   /** Initializes the RCC Oscillators according to the specified parameters
   * in the RCC_OscInitTypeDef structure.
   */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
   RCC_OscInitStruct.HSEState = RCC_HSE_ON;
   RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
   RCC_OscInitStruct.HSIState = RCC_HSI_ON;
+  RCC_OscInitStruct.LSIState = RCC_LSI_ON;
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
   RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
   RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
@@ -156,7 +161,9 @@ void SystemClock_Config(void)
   {
     Error_Handler();
   }
-  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC|RCC_PERIPHCLK_USB;
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_ADC
+                              |RCC_PERIPHCLK_USB;
+  PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
   PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6;
   PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
   if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
@@ -210,6 +217,36 @@ static void MX_ADC1_Init(void)
 
 }
 
+/**
+  * @brief RTC Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_RTC_Init(void)
+{
+
+  /* USER CODE BEGIN RTC_Init 0 */
+
+  /* USER CODE END RTC_Init 0 */
+
+  /* USER CODE BEGIN RTC_Init 1 */
+
+  /* USER CODE END RTC_Init 1 */
+  /** Initialize RTC Only
+  */
+  hrtc.Instance = RTC;
+  hrtc.Init.AsynchPrediv = RTC_AUTO_1_SECOND;
+  hrtc.Init.OutPut = RTC_OUTPUTSOURCE_ALARM;
+  if (HAL_RTC_Init(&hrtc) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN RTC_Init 2 */
+
+  /* USER CODE END RTC_Init 2 */
+
+}
+
 /**
   * @brief SPI1 Initialization Function
   * @param None
@@ -352,12 +389,23 @@ static void MX_USB_PCD_Init(void)
   */
 static void MX_GPIO_Init(void)
 {
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
 
   /* GPIO Ports Clock Enable */
   __HAL_RCC_GPIOC_CLK_ENABLE();
   __HAL_RCC_GPIOD_CLK_ENABLE();
   __HAL_RCC_GPIOA_CLK_ENABLE();
 
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOC, GPIO_PIN_13, GPIO_PIN_SET);
+
+  /*Configure GPIO pin : PC13 */
+  GPIO_InitStruct.Pin = GPIO_PIN_13;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
 }
 
 /* USER CODE BEGIN 4 */

bsp/stm32/stm32f103-blue-pill/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c

@@ -141,6 +141,53 @@ void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
 
 }
 
+/**
+* @brief RTC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hrtc: RTC handle pointer
+* @retval None
+*/
+void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
+{
+  if(hrtc->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspInit 0 */
+
+  /* USER CODE END RTC_MspInit 0 */
+    HAL_PWR_EnableBkUpAccess();
+    /* Enable BKP CLK enable for backup registers */
+    __HAL_RCC_BKP_CLK_ENABLE();
+    /* Peripheral clock enable */
+    __HAL_RCC_RTC_ENABLE();
+  /* USER CODE BEGIN RTC_MspInit 1 */
+
+  /* USER CODE END RTC_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief RTC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hrtc: RTC handle pointer
+* @retval None
+*/
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
+{
+  if(hrtc->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspDeInit 0 */
+
+  /* USER CODE END RTC_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_RTC_DISABLE();
+  /* USER CODE BEGIN RTC_MspDeInit 1 */
+
+  /* USER CODE END RTC_MspDeInit 1 */
+  }
+
+}
+
 /**
 * @brief SPI MSP Initialization
 * This function configures the hardware resources used in this example

bsp/stm32/stm32f103-blue-pill/board/board.h

@@ -21,7 +21,7 @@ extern "C" {
 #endif
 
 #define STM32_FLASH_START_ADRESS     ((uint32_t)0x08000000)
-#define STM32_FLASH_SIZE             (64 * 1024)
+#define STM32_FLASH_SIZE             (128 * 1024)
 #define STM32_FLASH_END_ADDRESS      ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE))
 
 /* Internal SRAM memory size[Kbytes] <8-64>, Default: 64*/

bsp/stm32/stm32f103-blue-pill/board/linker_scripts/link.icf

@@ -5,7 +5,7 @@
 define symbol __ICFEDIT_intvec_start__ = 0x08000000;
 /*-Memory Regions-*/
 define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
-define symbol __ICFEDIT_region_ROM_end__   = 0x0800FFFF;
+define symbol __ICFEDIT_region_ROM_end__   = 0x0801FFFF;
 define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
 define symbol __ICFEDIT_region_RAM_end__   = 0x20004FFF;
 /*-Sizes-*/

bsp/stm32/stm32f103-blue-pill/board/linker_scripts/link.lds

@@ -5,7 +5,7 @@
 /* Program Entry, set to mark it as "used" and avoid gc */
 MEMORY
 {
-    ROM (rx) : ORIGIN = 0x08000000, LENGTH = 64k /* 64KB flash */
+    ROM (rx) : ORIGIN = 0x08000000, LENGTH = 128k /* 128KB flash */
     RAM (rw) : ORIGIN = 0x20000000, LENGTH =  20k /* 20K sram */
 }
 ENTRY(Reset_Handler)

bsp/stm32/stm32f103-blue-pill/board/linker_scripts/link.sct

@@ -2,8 +2,8 @@
 ; *** Scatter-Loading Description File generated by uVision ***
 ; *************************************************************
 
-LR_IROM1 0x08000000 0x00010000  {    ; load region size_region
-  ER_IROM1 0x08000000 0x00010000  {  ; load address = execution address
+LR_IROM1 0x08000000 0x00020000  {    ; load region size_region
+  ER_IROM1 0x08000000 0x00020000  {  ; load address = execution address
    *.o (RESET, +First)
    *(InRoot$$Sections)
    .ANY (+RO)

bsp/stm32/stm32f103-blue-pill/project.uvoptx

@@ -26,7 +26,7 @@
     <ToolsetNumber>0x4</ToolsetNumber>
     <ToolsetName>ARM-ADS</ToolsetName>
     <TargetOption>
-      <CLKADS>12000000</CLKADS>
+      <CLKADS>8000000</CLKADS>
       <OPTTT>
         <gFlags>1</gFlags>
         <BeepAtEnd>1</BeepAtEnd>
@@ -73,33 +73,11 @@
         <LExpSel>0</LExpSel>
       </OPTXL>
       <OPTFL>
-        <tvExp>1</tvExp>
+        <tvExp>0</tvExp>
         <tvExpOptDlg>0</tvExpOptDlg>
         <IsCurrentTarget>1</IsCurrentTarget>
       </OPTFL>
       <CpuCode>18</CpuCode>
-      <Books>
-        <Book>
-          <Number>0</Number>
-          <Title>Base Board Schematics (MCBSTM32E)</Title>
-          <Path>I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e-base-board-schematics.pdf</Path>
-        </Book>
-        <Book>
-          <Number>1</Number>
-          <Title>Display Board Schematics (MCBSTM32E)</Title>
-          <Path>I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e-display-board-schematics.pdf</Path>
-        </Book>
-        <Book>
-          <Number>2</Number>
-          <Title>User Manual (MCBSTM32E)</Title>
-          <Path>I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e.chm</Path>
-        </Book>
-        <Book>
-          <Number>3</Number>
-          <Title>MCBSTM32E Evaluation Board Web Page (MCBSTM32E)</Title>
-          <Path>http://www.keil.com/mcbstm32e/</Path>
-        </Book>
-      </Books>
       <DebugOpt>
         <uSim>0</uSim>
         <uTrg>1</uTrg>
@@ -122,7 +100,10 @@
         <tRSysVw>1</tRSysVw>
         <sRunDeb>0</sRunDeb>
         <sLrtime>0</sLrtime>
-        <nTsel>1</nTsel>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
         <sDll></sDll>
         <sDllPa></sDllPa>
         <sDlgDll></sDlgDll>
@@ -133,18 +114,18 @@
         <tDlgDll></tDlgDll>
         <tDlgPa></tDlgPa>
         <tIfile></tIfile>
-        <pMon>BIN\UL2CM3.DLL</pMon>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
         <SetRegEntry>
           <Number>0</Number>
-          <Key>JL2CM3</Key>
-          <Name>-U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN0</Name>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 -FP0($$Device:STM32F103CB$Flash\STM32F10x_128.FLM)</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
-          <Key>UL2CM3</Key>
-          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)</Name>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103CB$Flash\STM32F10x_128.FLM)</Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
       <Breakpoint/>
@@ -179,6 +160,17 @@
       </DebugFlag>
       <LintExecutable></LintExecutable>
       <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
       <DebugDescription>
         <Enable>1</Enable>
         <EnableLog>0</EnableLog>

bsp/stm32/stm32f103-blue-pill/project.uvprojx

@@ -7,18 +7,19 @@
       <TargetName>rt-thread</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
+      <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
-          <Device>STM32F103C8</Device>
+          <Device>STM32F103CB</Device>
           <Vendor>STMicroelectronics</Vendor>
-          <PackID>Keil.STM32F1xx_DFP.1.0.5</PackID>
+          <PackID>Keil.STM32F1xx_DFP.2.3.0</PackID>
           <PackURL>http://www.keil.com/pack/</PackURL>
-          <Cpu>IROM(0x08000000,0x10000) IRAM(0x20000000,0x5000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
+          <Cpu>IRAM(0x20000000,0x00005000) IROM(0x08000000,0x00020000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec />
           <StartupFile />
-          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM))</FlashDriverDll>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103CB$Flash\STM32F10x_128.FLM))</FlashDriverDll>
           <DeviceId>0</DeviceId>
-          <RegisterFile>$$Device:STM32F103C8$Device\Include\stm32f10x.h</RegisterFile>
+          <RegisterFile>$$Device:STM32F103CB$Device\Include\stm32f10x.h</RegisterFile>
           <MemoryEnv />
           <Cmp />
           <Asm />
@@ -28,7 +29,7 @@
           <SLE66CMisc />
           <SLE66AMisc />
           <SLE66LinkerMisc />
-          <SFDFile>$$Device:STM32F103C8$SVD\STM32F103xx.svd</SFDFile>
+          <SFDFile>$$Device:STM32F103CB$SVD\STM32F103xx.svd</SFDFile>
           <bCustSvd>0</bCustSvd>
           <UseEnv>0</UseEnv>
           <BinPath />
@@ -49,7 +50,7 @@
           <CreateLib>0</CreateLib>
           <CreateHexFile>1</CreateHexFile>
           <DebugInformation>1</DebugInformation>
-          <BrowseInformation>0</BrowseInformation>
+          <BrowseInformation>1</BrowseInformation>
           <ListingPath>.\build\keil\List\</ListingPath>
           <HexFormatSelection>1</HexFormatSelection>
           <Merge32K>0</Merge32K>
@@ -81,6 +82,8 @@
             <UserProg2Name />
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
           </AfterMake>
           <SelectedForBatchBuild>0</SelectedForBatchBuild>
           <SVCSIdString />
@@ -104,12 +107,12 @@
         <DllOption>
           <SimDllName>SARMCM3.DLL</SimDllName>
           <SimDllArguments> -REMAP</SimDllArguments>
-          <SimDlgDll>DCM.DLL</SimDlgDll>
-          <SimDlgDllArguments>-pCM3</SimDlgDllArguments>
+          <SimDlgDll>DARMSTM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pSTM32F103CB</SimDlgDllArguments>
           <TargetDllName>SARMCM3.DLL</TargetDllName>
           <TargetDllArguments />
-          <TargetDlgDll>TCM.DLL</TargetDlgDll>
-          <TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
+          <TargetDlgDll>TARMSTM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>pSTM32F103CB</TargetDlgDllArguments>
         </DllOption>
         <DebugOption>
           <OPTHX>
@@ -119,47 +122,6 @@
             <HexOffset>0</HexOffset>
             <Oh166RecLen>16</Oh166RecLen>
           </OPTHX>
-          <Simulator>
-            <UseSimulator>0</UseSimulator>
-            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
-            <RunToMain>1</RunToMain>
-            <RestoreBreakpoints>1</RestoreBreakpoints>
-            <RestoreWatchpoints>1</RestoreWatchpoints>
-            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
-            <RestoreFunctions>1</RestoreFunctions>
-            <RestoreToolbox>1</RestoreToolbox>
-            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
-            <RestoreSysVw>1</RestoreSysVw>
-          </Simulator>
-          <Target>
-            <UseTarget>1</UseTarget>
-            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
-            <RunToMain>1</RunToMain>
-            <RestoreBreakpoints>1</RestoreBreakpoints>
-            <RestoreWatchpoints>1</RestoreWatchpoints>
-            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
-            <RestoreFunctions>0</RestoreFunctions>
-            <RestoreToolbox>1</RestoreToolbox>
-            <RestoreTracepoints>1</RestoreTracepoints>
-            <RestoreSysVw>1</RestoreSysVw>
-          </Target>
-          <RunDebugAfterBuild>0</RunDebugAfterBuild>
-          <TargetSelection>1</TargetSelection>
-          <SimDlls>
-            <CpuDll />
-            <CpuDllArguments />
-            <PeripheralDll />
-            <PeripheralDllArguments />
-            <InitializationFile />
-          </SimDlls>
-          <TargetDlls>
-            <CpuDll />
-            <CpuDllArguments />
-            <PeripheralDll />
-            <PeripheralDllArguments />
-            <InitializationFile />
-            <Driver>BIN\UL2CM3.DLL</Driver>
-          </TargetDlls>
         </DebugOption>
         <Utilities>
           <Flash1>
@@ -224,6 +186,7 @@
             <useUlib>0</useUlib>
             <EndSel>0</EndSel>
             <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
             <RoSelD>3</RoSelD>
             <RwSelD>3</RwSelD>
             <CodeSel>0</CodeSel>
@@ -282,7 +245,7 @@
               <IROM>
                 <Type>1</Type>
                 <StartAddress>0x8000000</StartAddress>
-                <Size>0x10000</Size>
+                <Size>0x20000</Size>
               </IROM>
               <XRAM>
                 <Type>0</Type>
@@ -307,7 +270,7 @@
               <OCR_RVCT4>
                 <Type>1</Type>
                 <StartAddress>0x8000000</StartAddress>
-                <Size>0x10000</Size>
+                <Size>0x20000</Size>
               </OCR_RVCT4>
               <OCR_RVCT5>
                 <Type>1</Type>
@@ -344,7 +307,7 @@
           </ArmAdsMisc>
           <Cads>
             <interw>1</interw>
-            <Optim>1</Optim>
+            <Optim>3</Optim>
             <oTime>0</oTime>
             <SplitLS>0</SplitLS>
             <OneElfS>1</OneElfS>
@@ -357,12 +320,20 @@
             <uThumb>0</uThumb>
             <uSurpInc>0</uSurpInc>
             <uC99>1</uC99>
+            <uGnu>0</uGnu>
             <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
             <VariousControls>
               <MiscControls />
               <Define>STM32F103xB, USE_HAL_DRIVER, __RTTHREAD__</Define>
               <Undefine />
-              <IncludePath>applications;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m3;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath>
+              <IncludePath>applications;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m3;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\..\..\components\libc\compilers\common;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -375,6 +346,7 @@
             <NoWarn>0</NoWarn>
             <uSurpInc>0</uSurpInc>
             <useXO>0</useXO>
+            <uClangAs>0</uClangAs>
             <VariousControls>
               <MiscControls />
               <Define />
@@ -666,23 +638,26 @@
           </Files>
           <Files>
             <File>
-              <FileName>signal.c</FileName>
+              <FileName>thread.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\signal.c</FilePath>
+              <FilePath>..\..\..\src\thread.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>thread.c</FileName>
+              <FileName>timer.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\thread.c</FilePath>
+              <FilePath>..\..\..\src\timer.c</FilePath>
             </File>
           </Files>
+        </Group>
+        <Group>
+          <GroupName>libc</GroupName>
           <Files>
             <File>
-              <FileName>timer.c</FileName>
+              <FileName>time.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\timer.c</FilePath>
+              <FilePath>..\..\..\components\libc\compilers\common\time.c</FilePath>
             </File>
           </Files>
         </Group>
@@ -783,4 +758,9 @@
       </Groups>
     </Target>
   </Targets>
+  <RTE>
+    <apis />
+    <components />
+    <files />
+  </RTE>
 </Project>

bsp/stm32/stm32f103-blue-pill/rtconfig.h

@@ -38,8 +38,9 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uart1"
-#define RT_VER_NUM 0x40001
+#define RT_VER_NUM 0x40003
 #define ARCH_ARM
+#define RT_USING_CPU_FFS
 #define ARCH_ARM_CORTEX_M
 #define ARCH_ARM_CORTEX_M3
 
@@ -81,24 +82,22 @@
 #define RT_SERIAL_RB_BUFSZ 64
 #define RT_USING_PIN
 
-/* Using WiFi */
-
-
 /* Using USB */
 
 
 /* POSIX layer and C standard library */
 
+#define RT_LIBC_USING_TIME
 
 /* Network */
 
 /* Socket abstraction layer */
 
 
-/* light weight TCP/IP stack */
+/* Network interface device */
 
 
-/* Modbus master and slave stack */
+/* light weight TCP/IP stack */
 
 
 /* AT commands */
@@ -141,18 +140,19 @@
 /* system packages */
 
 
+/* Micrium: Micrium software products porting for RT-Thread */
+
+
 /* peripheral libraries and drivers */
 
 
 /* miscellaneous packages */
 
 
-/* sample package */
-
 /* samples: kernel and components samples */
 
 
-/* example package: hello */
+/* games: games run on RT-Thread console */
 
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32F1

bsp/stm32/stm32f103-blue-pill/template.uvoptx

@@ -26,7 +26,7 @@
     <ToolsetNumber>0x4</ToolsetNumber>
     <ToolsetName>ARM-ADS</ToolsetName>
     <TargetOption>
-      <CLKADS>12000000</CLKADS>
+      <CLKADS>8000000</CLKADS>
       <OPTTT>
         <gFlags>1</gFlags>
         <BeepAtEnd>1</BeepAtEnd>
@@ -119,18 +119,13 @@
       <TargetDriverDllRegistry>
         <SetRegEntry>
           <Number>0</Number>
-          <Key>ST-LINKIII-KEIL_SWO</Key>
-          <Name>-U -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)</Name>
-        </SetRegEntry>
-        <SetRegEntry>
-          <Number>0</Number>
-          <Key>JL2CM3</Key>
-          <Name>-U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN0</Name>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 -FP0($$Device:STM32F103CB$Flash\STM32F10x_128.FLM)</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
-          <Key>UL2CM3</Key>
-          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)</Name>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL020000 -FP0($$Device:STM32F103CB$Flash\STM32F10x_128.FLM)</Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
       <Breakpoint/>

bsp/stm32/stm32f103-blue-pill/template.uvprojx

@@ -13,16 +13,16 @@
       <uAC6>0</uAC6>
       <TargetOption>
         <TargetCommonOption>
-          <Device>STM32F103C8</Device>
+          <Device>STM32F103CB</Device>
           <Vendor>STMicroelectronics</Vendor>
           <PackID>Keil.STM32F1xx_DFP.2.3.0</PackID>
           <PackURL>http://www.keil.com/pack/</PackURL>
-          <Cpu>IROM(0x08000000,0x10000) IRAM(0x20000000,0x5000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
+          <Cpu>IRAM(0x20000000,0x00005000) IROM(0x08000000,0x00020000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
-          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM))</FlashDriverDll>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103CB$Flash\STM32F10x_128.FLM))</FlashDriverDll>
           <DeviceId>0</DeviceId>
-          <RegisterFile>$$Device:STM32F103C8$Device\Include\stm32f10x.h</RegisterFile>
+          <RegisterFile>$$Device:STM32F103CB$Device\Include\stm32f10x.h</RegisterFile>
           <MemoryEnv></MemoryEnv>
           <Cmp></Cmp>
           <Asm></Asm>
@@ -32,7 +32,7 @@
           <SLE66CMisc></SLE66CMisc>
           <SLE66AMisc></SLE66AMisc>
           <SLE66LinkerMisc></SLE66LinkerMisc>
-          <SFDFile>$$Device:STM32F103C8$SVD\STM32F103xx.svd</SFDFile>
+          <SFDFile>$$Device:STM32F103CB$SVD\STM32F103xx.svd</SFDFile>
           <bCustSvd>0</bCustSvd>
           <UseEnv>0</UseEnv>
           <BinPath></BinPath>
@@ -110,12 +110,12 @@
         <DllOption>
           <SimDllName>SARMCM3.DLL</SimDllName>
           <SimDllArguments> -REMAP</SimDllArguments>
-          <SimDlgDll>DCM.DLL</SimDlgDll>
-          <SimDlgDllArguments>-pCM3</SimDlgDllArguments>
+          <SimDlgDll>DARMSTM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pSTM32F103CB</SimDlgDllArguments>
           <TargetDllName>SARMCM3.DLL</TargetDllName>
           <TargetDllArguments></TargetDllArguments>
-          <TargetDlgDll>TCM.DLL</TargetDlgDll>
-          <TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
+          <TargetDlgDll>TARMSTM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>pSTM32F103CB</TargetDlgDllArguments>
         </DllOption>
         <DebugOption>
           <OPTHX>
@@ -248,7 +248,7 @@
               <IROM>
                 <Type>1</Type>
                 <StartAddress>0x8000000</StartAddress>
-                <Size>0x10000</Size>
+                <Size>0x20000</Size>
               </IROM>
               <XRAM>
                 <Type>0</Type>
@@ -273,7 +273,7 @@
               <OCR_RVCT4>
                 <Type>1</Type>
                 <StartAddress>0x8000000</StartAddress>
-                <Size>0x10000</Size>
+                <Size>0x20000</Size>
               </OCR_RVCT4>
               <OCR_RVCT5>
                 <Type>1</Type>