Skip to content

R
rt-thread

lfmiao0 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 317fbd42 编写于 作者: S SummerGift
浏览文件
操作

[bsp][stm32] add stm32g071-st-nucleo bsp

上级 45ece194
展开全部 隐藏空白更改
内联 并排
Showing with 9989 addition and 15 deletion
bsp/stm32/libraries/HAL_Drivers/config/g0/dma_config.h 0 → 100644
浏览文件 @ 317fbd42
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-01-05 zylx first version
* 2019-01-08 SummerGift clean up the code
*/
#ifndef __DMA_CONFIG_H__
#define __DMA_CONFIG_H__
#include <rtthread.h>
#ifdef __cplusplus
extern "C" {
#endif
/* DMA1 channel1 */
/* DMA1 channel2-3 DMA2 channel1-2 */
#if defined(BSP_UART1_RX_USING_DMA) && !defined(UART1_RX_DMA_INSTANCE)
#define UART1_DMA_RX_IRQHandler DMA1_Channel2_3_IRQHandler
#define UART1_RX_DMA_RCC RCC_AHBENR_DMA1EN
#define UART1_RX_DMA_INSTANCE DMA1_Channel3
#define UART1_RX_DMA_IRQ DMA1_Channel2_3_IRQn
#endif
/* DMA1 channel2-3 DMA2 channel1-2 */
/* DMA1 channel4-7 DMA2 channel3-5 */
#if defined(BSP_UART2_RX_USING_DMA) && !defined(UART2_RX_DMA_INSTANCE)
#define UART2_DMA_RX_IRQHandler DMA1_Ch4_7_DMAMUX1_OVR_IRQHandler
#define UART2_RX_DMA_RCC RCC_AHBENR_DMA1EN
#define UART2_RX_DMA_INSTANCE DMA1_Channel5
#define UART2_RX_DMA_IRQ DMA1_Ch4_7_DMAMUX1_OVR_IRQn
#endif
/* DMA1 channel4-7 DMA2 channel3-5 */
#if defined(BSP_UART3_RX_USING_DMA) && !defined(UART3_RX_DMA_INSTANCE)
#define UART3_DMA_RX_IRQHandler DMA1_Ch4_7_DMAMUX1_OVR_IRQHandler
#define UART3_RX_DMA_RCC RCC_AHBENR_DMA1EN
#define UART3_RX_DMA_INSTANCE DMA1_Channel4
#define UART3_RX_DMA_IRQ DMA1_Ch4_7_DMAMUX1_OVR_IRQn
#endif
#if defined(BSP_UART4_RX_USING_DMA) && !defined(UART4_RX_DMA_INSTANCE)
#define UART4_DMA_RX_IRQHandler DMA1_Ch4_7_DMAMUX1_OVR_IRQHandler
#define UART4_RX_DMA_RCC RCC_AHBENR_DMA1EN
#define UART4_RX_DMA_INSTANCE DMA1_Channel6
#define UART4_RX_DMA_IRQ DMA1_Ch4_7_DMAMUX1_OVR_IRQn
#endif
#ifdef __cplusplus
}
#endif
#endif /* __DMA_CONFIG_H__ */
bsp/stm32/libraries/HAL_Drivers/config/g0/uart_config.h 0 → 100644
浏览文件 @ 317fbd42
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-10-30 zylx first version
*/
#ifndef __UART_CONFIG_H__
#define __UART_CONFIG_H__
#include <rtthread.h>
#if defined(BSP_USING_LPUART1)
#ifndef LPUART1_CONFIG
#define LPUART1_CONFIG \
{ \
.name = "lpuart1", \
.Instance = LPUART1, \
.irq_type = USART3_4_LPUART1_IRQn, \
}
#endif /* LPUART1_CONFIG */
#if defined(BSP_LPUART1_RX_USING_DMA)
#ifndef LPUART1_DMA_CONFIG
#define LPUART1_DMA_CONFIG \
{ \
.Instance = DMA1_Channel1, \
.dma_rcc = RCC_AHBENR_DMA1EN, \
.dma_irq = DMA1_Channel1_IRQn, \
}
#endif /* LPUART1_DMA_CONFIG */
#endif /* BSP_LPUART1_RX_USING_DMA */
#endif /* BSP_USING_LPUART1 */
#if defined(BSP_USING_UART1)
#ifndef UART1_CONFIG
#define UART1_CONFIG \
{ \
.name = "uart1", \
.Instance = USART1, \
.irq_type = USART1_IRQn, \
}
#endif /* UART1_CONFIG */
#endif /* BSP_USING_UART1 */
#if defined(BSP_UART1_RX_USING_DMA)
#ifndef UART1_DMA_CONFIG
#define UART1_DMA_CONFIG \
{ \
.Instance = UART1_RX_DMA_INSTANCE, \
.dma_rcc = UART1_RX_DMA_RCC, \
.dma_irq = UART1_RX_DMA_IRQ, \
}
#endif /* UART1_DMA_CONFIG */
#endif /* BSP_UART1_RX_USING_DMA */
#if defined(BSP_USING_UART2)
#ifndef UART2_CONFIG
#define UART2_CONFIG \
{ \
.name = "uart2", \
.Instance = USART2, \
.irq_type = USART2_IRQn, \
}
#endif /* UART2_CONFIG */
#endif /* BSP_USING_UART2 */
#if defined(BSP_UART2_RX_USING_DMA)
#ifndef UART2_DMA_CONFIG
#define UART2_DMA_CONFIG \
{ \
.Instance = UART2_RX_DMA_INSTANCE, \
.dma_rcc = UART2_RX_DMA_RCC, \
.dma_irq = UART2_RX_DMA_IRQ, \
}
#endif /* UART2_DMA_CONFIG */
#endif /* BSP_UART2_RX_USING_DMA */
#if defined(BSP_USING_UART3)
#ifndef UART3_CONFIG
#ifndef SOC_SERIES_STM32G0
#define UART3_CONFIG \
{ \
.name = "uart3", \
.Instance = USART3, \
.irq_type = USART3_IRQn, \
}
#else
#define UART3_CONFIG \
{ \
.name = "uart3", \
.Instance = USART3, \
.irq_type = USART3_4_LPUART1_IRQn, \
}
#endif /* SOC_SERIES_STM32G0 */
#endif /* UART3_CONFIG */
#endif /* BSP_USING_UART3 */
#if defined(BSP_UART3_RX_USING_DMA)
#ifndef UART3_DMA_CONFIG
#define UART3_DMA_CONFIG \
{ \
.Instance = UART3_RX_DMA_INSTANCE, \
.dma_rcc = UART3_RX_DMA_RCC, \
.dma_irq = UART3_RX_DMA_IRQ, \
}
#endif /* UART3_DMA_CONFIG */
#endif /* BSP_UART3_RX_USING_DMA */
#if defined(BSP_USING_UART4)
#ifndef UART4_CONFIG
#ifndef SOC_SERIES_STM32G0
#define UART4_CONFIG \
{ \
.name = "uart4", \
.Instance = UART4, \
.irq_type = UART4_IRQn, \
}
#else
#define UART4_CONFIG \
{ \
.name = "uart4", \
.Instance = USART4, \
.irq_type = USART3_4_LPUART1_IRQn, \
}
#endif /* UART4_CONFIG */
#endif /* SOC_SERIES_STM32G0 */
#endif /* BSP_USING_UART4 */
#if defined(BSP_UART4_RX_USING_DMA)
#ifndef UART4_DMA_CONFIG
#define UART4_DMA_CONFIG \
{ \
.Instance = UART4_RX_DMA_INSTANCE, \
.dma_rcc = UART4_RX_DMA_RCC, \
.dma_irq = UART4_RX_DMA_IRQ, \
}
#endif /* UART4_DMA_CONFIG */
#endif /* BSP_UART4_RX_USING_DMA */
#if defined(BSP_USING_UART5)
#ifndef UART5_CONFIG
#define UART5_CONFIG \
{ \
.name = "uart5", \
.Instance = UART5, \
.irq_type = UART5_IRQn, \
}
#endif /* UART5_CONFIG */
#endif /* BSP_USING_UART5 */
#if defined(BSP_UART5_RX_USING_DMA)
#ifndef UART5_DMA_CONFIG
#define UART5_DMA_CONFIG \
{ \
.Instance = DMA_NOT_AVAILABLE, \
}
#endif /* UART5_DMA_CONFIG */
#endif /* BSP_UART5_RX_USING_DMA */
#ifdef __cplusplus
}
#endif
#endif /* __UART_CONFIG_H__ */
bsp/stm32/libraries/HAL_Drivers/drv_config.h
浏览文件 @ 317fbd42
......@@ -58,6 +58,9 @@ extern "C" {
#include "l4/adc_config.h"
#include "l4/tim_config.h"
#include "l4/pwm_config.h"
#elif defined(SOC_SERIES_STM32G0)
#include "g0/dma_config.h"
#include "g0/uart_config.h"
#endif
#ifdef __cplusplus
......
bsp/stm32/libraries/HAL_Drivers/drv_dma.h
浏览文件 @ 317fbd42
......@@ -18,7 +18,8 @@
extern "C" {
#endif
#if defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4)
#if defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4) \
|| defined(SOC_SERIES_STM32G0)
#define DMA_INSTANCE_TYPE DMA_Channel_TypeDef
#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
#define DMA_INSTANCE_TYPE DMA_Stream_TypeDef
......
bsp/stm32/libraries/HAL_Drivers/drv_gpio.c
浏览文件 @ 317fbd42
......@@ -217,7 +217,7 @@ static const struct pin_index pins[] =
static const struct pin_irq_map pin_irq_map[] =
{
#if defined(SOC_SERIES_STM32F0)
#if defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32G0)
{GPIO_PIN_0, EXTI0_1_IRQn},
{GPIO_PIN_1, EXTI0_1_IRQn},
{GPIO_PIN_2, EXTI2_3_IRQn},
......
bsp/stm32/libraries/HAL_Drivers/drv_usart.c
浏览文件 @ 317fbd42
......@@ -18,7 +18,8 @@
#define LOG_TAG "drv.usart"
#include <drv_log.h>
#if !defined(BSP_USING_UART1) && !defined(BSP_USING_UART2) && !defined(BSP_USING_UART3) && !defined(BSP_USING_UART4) && !defined(BSP_USING_UART5)
#if !defined(BSP_USING_UART1) && !defined(BSP_USING_UART2) && !defined(BSP_USING_UART3) \
&& !defined(BSP_USING_UART4) && !defined(BSP_USING_UART5) && !defined(BSP_USING_LPUART1)
#error "Please define at least one BSP_USING_UARTx"
/* this driver can be disabled at menuconfig → RT-Thread Components → Device Drivers */
#endif
......@@ -44,6 +45,9 @@ enum
#ifdef BSP_USING_UART5
UART5_INDEX,
#endif
#ifdef BSP_USING_LPUART1
LPUART1_INDEX,
#endif
};
static struct stm32_uart_config uart_config[] =
......@@ -63,6 +67,9 @@ static struct stm32_uart_config uart_config[] =
#ifdef BSP_USING_UART5
UART5_CONFIG,
#endif
#ifdef BSP_USING_LPUART1
LPUART1_CONFIG,
#endif
};
static struct stm32_uart uart_obj[sizeof(uart_config) / sizeof(uart_config[0])] = {0};
......@@ -175,7 +182,8 @@ static int stm32_putc(struct rt_serial_device *serial, char c)
uart = (struct stm32_uart *)serial->parent.user_data;
UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TC);
#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0)
#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0) \
|| defined(SOC_SERIES_STM32G0)
uart->handle.Instance->TDR = c;
#else
uart->handle.Instance->DR = c;
......@@ -195,7 +203,8 @@ static int stm32_getc(struct rt_serial_device *serial)
ch = -1;
if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_RXNE) != RESET)
{
#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0)
#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0) \
|| defined(SOC_SERIES_STM32G0)
ch = uart->handle.Instance->RDR & 0xff;
#else
ch = uart->handle.Instance->DR & 0xff;
......@@ -271,7 +280,8 @@ static void uart_isr(struct rt_serial_device *serial)
{
__HAL_UART_CLEAR_PEFLAG(&uart->handle);
}
#if !defined(SOC_SERIES_STM32L4) && !defined(SOC_SERIES_STM32F7) && !defined(SOC_SERIES_STM32F0)
#if !defined(SOC_SERIES_STM32L4) && !defined(SOC_SERIES_STM32F7) && !defined(SOC_SERIES_STM32F0) \
&& !defined(SOC_SERIES_STM32G0)
if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_LBD) != RESET)
{
UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_LBD);
......@@ -421,6 +431,19 @@ void UART5_DMA_RX_IRQHandler(void)
#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART5_RX_USING_DMA) */
#endif /* BSP_USING_UART5*/
#if defined(BSP_USING_LPUART1)
void USART3_4_LPUART1_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
uart_isr(&(uart_obj[LPUART1_INDEX].serial));
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#ifdef RT_SERIAL_USING_DMA
static void stm32_dma_config(struct rt_serial_device *serial)
{
......@@ -433,7 +456,7 @@ static void stm32_dma_config(struct rt_serial_device *serial)
{
rt_uint32_t tmpreg= 0x00U;
#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0)
#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32G0)
/* enable DMA clock && Delay after an RCC peripheral clock enabling*/
SET_BIT(RCC->AHBENR, uart->config->dma_rx->dma_rcc);
tmpreg = READ_BIT(RCC->AHBENR, uart->config->dma_rx->dma_rcc);
......@@ -444,10 +467,10 @@ static void stm32_dma_config(struct rt_serial_device *serial)
#endif
UNUSED(tmpreg); /* To avoid compiler warnings */
}
__HAL_LINKDMA(&(uart->handle), hdmarx, uart->dma.handle);
#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0)
#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32G0)
uart->dma.handle.Instance = uart->config->dma_rx->Instance;
#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
uart->dma.handle.Instance = uart->config->dma_rx->Instance;
......@@ -579,7 +602,7 @@ int rt_hw_usart_init(void)
rt_size_t obj_num = sizeof(uart_obj) / sizeof(struct stm32_uart);
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
rt_err_t result = 0;
stm32_uart_get_dma_config();
for (int i = 0; i < obj_num; i++)
......@@ -587,8 +610,8 @@ int rt_hw_usart_init(void)
uart_obj[i].config = &uart_config[i];
uart_obj[i].serial.ops = &stm32_uart_ops;
uart_obj[i].serial.config = config;
#if defined(RT_SERIAL_USING_DMA)
#if defined(RT_SERIAL_USING_DMA)
if(uart_obj[i].uart_dma_flag)
{
/* register UART device */
......@@ -597,7 +620,7 @@ int rt_hw_usart_init(void)
,&uart_obj[i]);
}
else
#endif
#endif
{
/* register UART device */
result = rt_hw_serial_register(&uart_obj[i].serial,uart_obj[i].config->name,
......
bsp/stm32/libraries/HAL_Drivers/drv_usart.h
浏览文件 @ 317fbd42
......@@ -19,13 +19,15 @@
int rt_hw_usart_init(void);
#if defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4)
#if defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4) \
|| defined(SOC_SERIES_STM32G0)
#define DMA_INSTANCE_TYPE DMA_Channel_TypeDef
#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
#define DMA_INSTANCE_TYPE DMA_Stream_TypeDef
#endif /* defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4) */
#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F4)
#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F4) \
|| defined(SOC_SERIES_STM32G0)
#define UART_INSTANCE_CLEAR_FUNCTION __HAL_UART_CLEAR_FLAG
#elif defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0)
#define UART_INSTANCE_CLEAR_FUNCTION __HAL_UART_CLEAR_IT
......
bsp/stm32/stm32g071-st-nucleo/.config 0 → 100644
浏览文件 @ 317fbd42
#
# Automatically generated file; DO NOT EDIT.
# RT-Thread Configuration
#
#
# RT-Thread Kernel
#
CONFIG_RT_NAME_MAX=8
# CONFIG_RT_USING_SMP is not set
CONFIG_RT_ALIGN_SIZE=4
# CONFIG_RT_THREAD_PRIORITY_8 is not set
CONFIG_RT_THREAD_PRIORITY_32=y
# CONFIG_RT_THREAD_PRIORITY_256 is not set
CONFIG_RT_THREAD_PRIORITY_MAX=32
CONFIG_RT_TICK_PER_SECOND=100
CONFIG_RT_USING_OVERFLOW_CHECK=y
CONFIG_RT_USING_HOOK=y
CONFIG_RT_USING_IDLE_HOOK=y
CONFIG_RT_IDEL_HOOK_LIST_SIZE=4
CONFIG_IDLE_THREAD_STACK_SIZE=256
# CONFIG_RT_USING_TIMER_SOFT is not set
CONFIG_RT_DEBUG=y
# CONFIG_RT_DEBUG_INIT_CONFIG is not set
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
# CONFIG_RT_DEBUG_IPC_CONFIG is not set
# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
# CONFIG_RT_DEBUG_MEM_CONFIG is not set
# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
#
# Inter-Thread communication
#
CONFIG_RT_USING_SEMAPHORE=y
CONFIG_RT_USING_MUTEX=y
CONFIG_RT_USING_EVENT=y
CONFIG_RT_USING_MAILBOX=y
CONFIG_RT_USING_MESSAGEQUEUE=y
# CONFIG_RT_USING_SIGNALS is not set
#
# Memory Management
#
CONFIG_RT_USING_MEMPOOL=y
# CONFIG_RT_USING_MEMHEAP is not set
# CONFIG_RT_USING_NOHEAP is not set
CONFIG_RT_USING_SMALL_MEM=y
# CONFIG_RT_USING_SLAB is not set
# CONFIG_RT_USING_MEMTRACE is not set
CONFIG_RT_USING_HEAP=y
#
# Kernel Device Object
#
CONFIG_RT_USING_DEVICE=y
# CONFIG_RT_USING_DEVICE_OPS is not set
# CONFIG_RT_USING_INTERRUPT_INFO is not set
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="lpuart1"
CONFIG_RT_VER_NUM=0x40000
CONFIG_ARCH_ARM=y
CONFIG_ARCH_ARM_CORTEX_M=y
CONFIG_ARCH_ARM_CORTEX_M0=y
# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
#
# RT-Thread Components
#
CONFIG_RT_USING_COMPONENTS_INIT=y
CONFIG_RT_USING_USER_MAIN=y
CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
CONFIG_RT_MAIN_THREAD_PRIORITY=10
#
# C++ features
#
# CONFIG_RT_USING_CPLUSPLUS is not set
#
# Command shell
#
CONFIG_RT_USING_FINSH=y
CONFIG_FINSH_THREAD_NAME="tshell"
CONFIG_FINSH_USING_HISTORY=y
CONFIG_FINSH_HISTORY_LINES=5
CONFIG_FINSH_USING_SYMTAB=y
CONFIG_FINSH_USING_DESCRIPTION=y
# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
CONFIG_FINSH_THREAD_PRIORITY=20
CONFIG_FINSH_THREAD_STACK_SIZE=4096
CONFIG_FINSH_CMD_SIZE=80
# CONFIG_FINSH_USING_AUTH is not set
CONFIG_FINSH_USING_MSH=y
CONFIG_FINSH_USING_MSH_DEFAULT=y
# CONFIG_FINSH_USING_MSH_ONLY is not set
CONFIG_FINSH_ARG_MAX=10
#
# Device virtual file system
#
# CONFIG_RT_USING_DFS is not set
#
# Device Drivers
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
CONFIG_RT_USING_SERIAL=y
# CONFIG_RT_SERIAL_USING_DMA is not set
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
# CONFIG_RT_USING_I2C is not set
CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_ADC is not set
# CONFIG_RT_USING_PWM is not set
# CONFIG_RT_USING_MTD_NOR is not set
# CONFIG_RT_USING_MTD_NAND is not set
# CONFIG_RT_USING_MTD is not set
# CONFIG_RT_USING_PM is not set
# CONFIG_RT_USING_RTC is not set
# CONFIG_RT_USING_SDIO is not set
# CONFIG_RT_USING_SPI is not set
# CONFIG_RT_USING_WDT is not set
# CONFIG_RT_USING_AUDIO is not set
#
# Using WiFi
#
# CONFIG_RT_USING_WIFI is not set
#
# Using USB
#
# CONFIG_RT_USING_USB_HOST is not set
# CONFIG_RT_USING_USB_DEVICE is not set
#
# POSIX layer and C standard library
#
# CONFIG_RT_USING_LIBC is not set
# CONFIG_RT_USING_PTHREADS is not set
#
# Network
#
#
# Socket abstraction layer
#
# CONFIG_RT_USING_SAL is not set
#
# light weight TCP/IP stack
#
# CONFIG_RT_USING_LWIP is not set
#
# Modbus master and slave stack
#
# CONFIG_RT_USING_MODBUS is not set
#
# AT commands
#
# CONFIG_RT_USING_AT is not set
#
# VBUS(Virtual Software BUS)
#
# CONFIG_RT_USING_VBUS is not set
#
# Utilities
#
# CONFIG_RT_USING_LOGTRACE is not set
# CONFIG_RT_USING_RYM is not set
# CONFIG_RT_USING_ULOG is not set
# CONFIG_RT_USING_UTEST is not set
#
# ARM CMSIS
#
# CONFIG_RT_USING_CMSIS_OS is not set
# CONFIG_RT_USING_RTT_CMSIS is not set
# CONFIG_RT_USING_LWP is not set
#
# RT-Thread online packages
#
#
# IoT - internet of things
#
# CONFIG_PKG_USING_PAHOMQTT is not set
# CONFIG_PKG_USING_WEBCLIENT is not set
# CONFIG_PKG_USING_WEBNET is not set
# CONFIG_PKG_USING_MONGOOSE is not set
# CONFIG_PKG_USING_WEBTERMINAL is not set
# CONFIG_PKG_USING_CJSON is not set
# CONFIG_PKG_USING_JSMN is not set
# CONFIG_PKG_USING_LJSON is not set
# CONFIG_PKG_USING_EZXML is not set
# CONFIG_PKG_USING_NANOPB is not set
#
# Wi-Fi
#
#
# Marvell WiFi
#
# CONFIG_PKG_USING_WLANMARVELL is not set
#
# Wiced WiFi
#
# CONFIG_PKG_USING_WLAN_WICED is not set
# CONFIG_PKG_USING_COAP is not set
# CONFIG_PKG_USING_NOPOLL is not set
# CONFIG_PKG_USING_NETUTILS is not set
# CONFIG_PKG_USING_AT_DEVICE is not set
# CONFIG_PKG_USING_WIZNET is not set
#
# IoT Cloud
#
# CONFIG_PKG_USING_ONENET is not set
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
# CONFIG_PKG_USING_ALI_IOTKIT is not set
# CONFIG_PKG_USING_AZURE is not set
# CONFIG_PKG_USING_TENCENT_IOTKIT is not set
#
# security packages
#
# CONFIG_PKG_USING_MBEDTLS is not set
# CONFIG_PKG_USING_libsodium is not set
# CONFIG_PKG_USING_TINYCRYPT is not set
#
# language packages
#
# CONFIG_PKG_USING_LUA is not set
# CONFIG_PKG_USING_JERRYSCRIPT is not set
# CONFIG_PKG_USING_MICROPYTHON is not set
#
# multimedia packages
#
# CONFIG_PKG_USING_OPENMV is not set
# CONFIG_PKG_USING_MUPDF is not set
#
# tools packages
#
# CONFIG_PKG_USING_CMBACKTRACE is not set
# CONFIG_PKG_USING_EASYFLASH is not set
# CONFIG_PKG_USING_EASYLOGGER is not set
# CONFIG_PKG_USING_SYSTEMVIEW is not set
# CONFIG_PKG_USING_RDB is not set
# CONFIG_PKG_USING_QRCODE is not set
# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
#
# system packages
#
# CONFIG_PKG_USING_GUIENGINE is not set
# CONFIG_PKG_USING_CAIRO is not set
# CONFIG_PKG_USING_PIXMAN is not set
# CONFIG_PKG_USING_LWEXT4 is not set
# CONFIG_PKG_USING_PARTITION is not set
# CONFIG_PKG_USING_FAL is not set
# CONFIG_PKG_USING_SQLITE is not set
# CONFIG_PKG_USING_RTI is not set
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
# CONFIG_PKG_USING_CMSIS is not set
# CONFIG_PKG_USING_DFS_YAFFS is not set
# CONFIG_PKG_USING_LITTLEFS is not set
#
# peripheral libraries and drivers
#
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_AHT10 is not set
# CONFIG_PKG_USING_AP3216C is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
# CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_U8G2 is not set
# CONFIG_PKG_USING_BUTTON is not set
# CONFIG_PKG_USING_MPU6XXX is not set
# CONFIG_PKG_USING_PCF8574 is not set
# CONFIG_PKG_USING_KENDRYTE_SDK is not set
#
# miscellaneous packages
#
# CONFIG_PKG_USING_LIBCSV is not set
# CONFIG_PKG_USING_OPTPARSE is not set
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
# CONFIG_PKG_USING_CANFESTIVAL is not set
# CONFIG_PKG_USING_ZLIB is not set
# CONFIG_PKG_USING_DSTR is not set
# CONFIG_PKG_USING_TINYFRAME is not set
# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
#
# samples: kernel and components samples
#
# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
# CONFIG_PKG_USING_HELLO is not set
# CONFIG_PKG_USING_VI is not set
CONFIG_SOC_FAMILY_STM32=y
CONFIG_SOC_SERIES_STM32G0=y
#
# Hardware Drivers Config
#
CONFIG_SOC_STM32G071RB=y
#
# Onboard Peripheral Drivers
#
CONFIG_BSP_USING_USB_TO_USART=y
#
# On-chip Peripheral Drivers
#
CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y
CONFIG_BSP_USING_LPUART1=y
# CONFIG_BSP_USING_UART1 is not set
# CONFIG_BSP_USING_UART2 is not set
#
# Board extended module Drivers
#
bsp/stm32/stm32g071-st-nucleo/.gitignore 0 → 100644
浏览文件 @ 317fbd42
settings
build
*.uvguix.*
*.uvoptx
settings/*
build/*
bsp/stm32/stm32g071-st-nucleo/Kconfig 0 → 100644
浏览文件 @ 317fbd42
mainmenu "RT-Thread Configuration"
config $BSP_DIR
string
option env="BSP_ROOT"
default "."
config $RTT_DIR
string
option env="RTT_ROOT"
default "../../.."
config $PKGS_DIR
string
option env="PKGS_ROOT"
default "packages"
source "$RTT_DIR/Kconfig"
source "$PKGS_DIR/Kconfig"
source "../libraries/Kconfig"
source "board/Kconfig"
bsp/stm32/stm32g071-st-nucleo/README.md 0 → 100644
浏览文件 @ 317fbd42
# BSP README 模板
## 简介
本文档为 RT-Thread 开发团队为 STM32G071RB-Nucleo 开发板提供的 BSP (板级支持包) 说明。
主要内容如下：
- 开发板资源介绍
- BSP 快速上手
- 进阶使用方法
通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。
## 开发板介绍
STM32G071RB-Nucleo 开发板是 ST 官方推出的一款基于 ARM Cortex-M0+ 内核的开发板，最高主频为 64Mhz，该开发板具有丰富的扩展接口，可以方便验证 STM32G071RB 的芯片性能。
开发板外观如下图所示：
![board](figures/board.jpg)
该开发板常用 **板载资源** 如下：
- MCU：STM32G071RB，主频 64MHz，128KB FLASH ，36KB RAM
- 外部 RAM：无
- 外部 FLASH：无
- 常用外设
- 按键：1个，user（兼具唤醒功能，PC13）
- 常用接口：USB 转串口、arduino 接口等
- 调试接口，标准 SWD
开发板更多详细信息请参考 ST 的 [NUCLEO 开发板介绍](https://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-eval-tools/stm32-mcu-eval-tools/stm32-mcu-nucleo/nucleo-g071rb.html)。
## 外设支持
本 BSP 目前对外设的支持情况如下：
| **板载外设** | **支持情况** | **备注** |
| :----------------- | :----------: | :------------------------------------- |
| ST-LINK 虚拟串口 | 支持 | 使用 LPUART |
| **片上外设** | **支持情况** | **备注** |
| GPIO | 支持 | PA0, PA1... PC15 ---> PIN: 0, 1...47 |
| UART | 支持 | LPUART1, USART1/2 |
## 使用说明
使用说明分为如下两个章节：
- 快速上手
本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
- 进阶使用
本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。
### 快速上手
本 BSP 为开发者提供 MDK4、MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
#### 硬件连接
使用数据线连接开发板到 PC，打开电源开关。
#### 编译下载
双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
> 工程默认配置使用 xxx 仿真器下载程序，在通过 xxx 连接开发板的基础上，点击下载按钮即可下载程序到开发板
#### 运行结果
下载程序成功之后，系统会自动运行。
连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
```bash
\ | /
- RT - Thread Operating System
/ | \ 4.0.0 build Dec 21 2018
2006 - 2018 Copyright by rt-thread team
msh >
```
### 进阶使用
此 BSP 默认只开启了 GPIO 和 LPUART 的功能，如果需使用 SPI，I2C 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
1. 在 bsp 下打开 env 工具。
2. 输入`menuconfig`命令配置工程，配置好之后保存退出。
3. 输入`pkgs --update`命令更新软件包。
4. 输入`scons --target=mdk5/iar` 命令重新生成工程。
本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。
## 注意事项
- 无
## 联系人信息
维护人:
- [gztss](https://github.com/gztss)
\ No newline at end of file
bsp/stm32/stm32g071-st-nucleo/SConscript 0 → 100644
浏览文件 @ 317fbd42
# for module compiling
import os
Import('RTT_ROOT')
cwd = str(Dir('#'))
objs = []
list = os.listdir(cwd)
for d in list:
path = os.path.join(cwd, d)
if os.path.isfile(os.path.join(path, 'SConscript')):
objs = objs + SConscript(os.path.join(d, 'SConscript'))
Return('objs')
bsp/stm32/stm32g071-st-nucleo/SConstruct 0 → 100644
浏览文件 @ 317fbd42
import os
import sys
import rtconfig
if os.getenv('RTT_ROOT'):
RTT_ROOT = os.getenv('RTT_ROOT')
else:
RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
try:
from building import *
except:
print('Cannot found RT-Thread root directory, please check RTT_ROOT')
print(RTT_ROOT)
exit(-1)
TARGET = 'rt-thread.' + rtconfig.TARGET_EXT
env = Environment(tools = ['mingw'],
AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
AR = rtconfig.AR, ARFLAGS = '-rc',
LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
if rtconfig.PLATFORM == 'iar':
env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
env.Replace(ARFLAGS = [''])
env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map')
Export('RTT_ROOT')
Export('rtconfig')
SDK_ROOT = os.path.abspath('./')
if os.path.exists(SDK_ROOT + '/libraries'):
libraries_path_prefix = SDK_ROOT + '/libraries'
else:
libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries'
SDK_LIB = libraries_path_prefix
Export('SDK_LIB')
# prepare building environment
objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
stm32_library = 'STM32G0xx_HAL'
rtconfig.BSP_LIBRARY_TYPE = stm32_library
# include libraries
objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript')))
# include drivers
objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript')))
# make a building
DoBuilding(TARGET, objs)
bsp/stm32/stm32g071-st-nucleo/applications/SConscript 0 → 100644
浏览文件 @ 317fbd42
Import('RTT_ROOT')
Import('rtconfig')
from building import *
cwd = os.path.join(str(Dir('#')), 'applications')
src = Glob('*.c')
CPPPATH = [cwd, str(Dir('#'))]
group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
Return('group')
bsp/stm32/stm32g071-st-nucleo/applications/main.c 0 → 100644
浏览文件 @ 317fbd42
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift change to new framework
*/
#include <rtthread.h>
#include <rtdevice.h>
#include <board.h>
/* defined the LED pin: PA5 */
#define LED_PIN GET_PIN(A, 5)
int main(void)
{
int count = 1;
/* set LED0 pin mode to output */
rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT);
while (count++)
{
rt_pin_write(LED0_PIN, PIN_HIGH);
rt_thread_mdelay(500);
rt_pin_write(LED0_PIN, PIN_LOW);
rt_thread_mdelay(500);
}
return RT_EOK;
}
bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/.mxproject 0 → 100644
浏览文件 @ 317fbd42
[PreviousGenFiles]
HeaderPath=C:/Users/Administrator/Documents/rt-thread/bsp/stm32/stm32g071-nucleo/board/CubeMX_Config/Inc
HeaderFiles=stm32g0xx_it.h;stm32g0xx_hal_conf.h;main.h;
SourcePath=C:/Users/Administrator/Documents/rt-thread/bsp/stm32/stm32g071-nucleo/board/CubeMX_Config/Src
SourceFiles=stm32g0xx_it.c;stm32g0xx_hal_msp.c;main.c;
[PreviousLibFiles]
LibFiles=Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ramfunc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h;Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dac_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ramfunc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h;Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g071xx.h;Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0xx.h;Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h;Drivers/CMSIS/Device/ST/STM32G0xx/Source/Templates/system_stm32g0xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;
[PreviousUsedKeilFiles]
SourceFiles=..\Src\main.c;..\Src\stm32g0xx_it.c;..\Src\stm32g0xx_hal_msp.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c;../\Src/system_stm32g0xx.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dac_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c;../Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c;../\Src/system_stm32g0xx.c;../Drivers/CMSIS/Device/ST/STM32G0xx/Source/Templates/system_stm32g0xx.c;C:/Users/Administrator/Documents/rt-thread/bsp/stm32/stm32g071-nucleo/board/CubeMX_Config//MDK-ARM/startup_stm32g071xx.s;
HeaderPath=..\Drivers\STM32G0xx_HAL_Driver\Inc;..\Drivers\STM32G0xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32G0xx\Include;..\Drivers\CMSIS\Include;..\Inc;
bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/Inc/main.h 0 → 100644
浏览文件 @ 317fbd42
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.h
* @brief : Header for main.c file.
* This file contains the common defines of the application.
******************************************************************************
** This notice applies to any and all portions of this file
* that are not between comment pairs USER CODE BEGIN and
* USER CODE END. Other portions of this file, whether
* inserted by the user or by software development tools
* are owned by their respective copyright owners.
*
* COPYRIGHT(c) 2019 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
/* USER CODE END EM */
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */
/* Private defines -----------------------------------------------------------*/
#define MCO_Pin GPIO_PIN_0
#define MCO_GPIO_Port GPIOF
#define LPUART1_TX_Pin GPIO_PIN_2
#define LPUART1_TX_GPIO_Port GPIOA
#define LPUART1_RX_Pin GPIO_PIN_3
#define LPUART1_RX_GPIO_Port GPIOA
#define TMS_Pin GPIO_PIN_13
#define TMS_GPIO_Port GPIOA
#define TCK_Pin GPIO_PIN_14
#define TCK_GPIO_Port GPIOA
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
#ifdef __cplusplus
}
#endif
#endif /* __MAIN_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/Inc/stm32g0xx_hal_conf.h 0 → 100644
浏览文件 @ 317fbd42
/**
******************************************************************************
* @file stm32g0xx_hal_conf.h
* @author MCD Application Team
* @brief HAL configuration template file.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32G0xx_HAL_CONF_H
#define STM32G0xx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_COMP_MODULE_ENABLED */
/* #define HAL_CRC_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
#define HAL_DAC_MODULE_ENABLED
/* #define HAL_EXTI_MODULE_ENABLED */
/* #define HAL_I2C_MODULE_ENABLED */
/* #define HAL_I2S_MODULE_ENABLED */
/* #define HAL_IWDG_MODULE_ENABLED */
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
/* #define HAL_RNG_MODULE_ENABLED */
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_SMBUS_MODULE_ENABLED */
#define HAL_SPI_MODULE_ENABLED
#define HAL_TIM_MODULE_ENABLED
#define HAL_UART_MODULE_ENABLED
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
/* ########################## Register Callbacks selection ############################## */
/**
* @brief This is the list of modules where register callback can be used
*/
#define USE_HAL_ADC_REGISTER_CALLBACKS 0u
#define USE_HAL_CEC_REGISTER_CALLBACKS 0u
#define USE_HAL_COMP_REGISTER_CALLBACKS 0u
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u
#define USE_HAL_DAC_REGISTER_CALLBACKS 0u
#define USE_HAL_I2C_REGISTER_CALLBACKS 0u
#define USE_HAL_I2S_REGISTER_CALLBACKS 0u
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u
#define USE_HAL_RNG_REGISTER_CALLBACKS 0u
#define USE_HAL_RTC_REGISTER_CALLBACKS 0u
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u
#define USE_HAL_SPI_REGISTER_CALLBACKS 0u
#define USE_HAL_TIM_REGISTER_CALLBACKS 0u
#define USE_HAL_UART_REGISTER_CALLBACKS 0u
#define USE_HAL_USART_REGISTER_CALLBACKS 0u
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u
/* ########################## Oscillator Values adaptation ####################*/
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature.*/
/**
* @brief External Low Speed oscillator (LSE) value.
* This value is used by the UART, RTC HAL module to compute the system frequency
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
* @brief External clock source for I2S1 peripheral
* This value is used by the RCC HAL module to compute the I2S1 clock source
* frequency.
*/
#if !defined (EXTERNAL_I2S1_CLOCK_VALUE)
#define EXTERNAL_I2S1_CLOCK_VALUE 12288000U /*!< Value of the I2S1 External clock source in Hz*/
#endif /* EXTERNAL_I2S1_CLOCK_VALUE */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define INSTRUCTION_CACHE_ENABLE 1U
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 0U
/* ################## CRYP peripheral configuration ########################## */
#define USE_HAL_CRYP_SUSPEND_RESUME 1U
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include modules header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32g0xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32g0xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32g0xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32g0xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32g0xx_hal_adc.h"
#include "stm32g0xx_hal_adc_ex.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32g0xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_COMP_MODULE_ENABLED
#include "stm32g0xx_hal_comp.h"
#endif /* HAL_COMP_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32g0xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32g0xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32g0xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32g0xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32g0xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32g0xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32g0xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32g0xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32g0xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32g0xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32g0xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32g0xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32g0xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32g0xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_SMBUS_MODULE_ENABLED
#include "stm32g0xx_hal_smbus.h"
#endif /* HAL_SMBUS_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32g0xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32g0xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32g0xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32g0xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32g0xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for functions parameters check.
* @param expr If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t *file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* STM32G0xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/Inc/stm32g0xx_it.h 0 → 100644
浏览文件 @ 317fbd42
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32g0xx_it.h
* @brief This file contains the headers of the interrupt handlers.
******************************************************************************
*
* COPYRIGHT(c) 2019 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32G0xx_IT_H
#define __STM32G0xx_IT_H
#ifdef __cplusplus
extern "C" {
#endif
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
/* USER CODE END EM */
/* Exported functions prototypes ---------------------------------------------*/
void NMI_Handler(void);
void HardFault_Handler(void);
void SVC_Handler(void);
void PendSV_Handler(void);
void SysTick_Handler(void);
void USART3_4_LPUART1_IRQHandler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */
#ifdef __cplusplus
}
#endif
#endif /* __STM32G0xx_IT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c 0 → 100644
浏览文件 @ 317fbd42
/* USER CODE BEGIN Header */
/**
******************************************************************************
* File Name : stm32g0xx_hal_msp.c
* Description : This file provides code for the MSP Initialization
* and de-Initialization codes.
******************************************************************************
** This notice applies to any and all portions of this file
* that are not between comment pairs USER CODE BEGIN and
* USER CODE END. Other portions of this file, whether
* inserted by the user or by software development tools
* are owned by their respective copyright owners.
*
* COPYRIGHT(c) 2019 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */
/* USER CODE END TD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN Define */
/* USER CODE END Define */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN Macro */
/* USER CODE END Macro */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* External functions --------------------------------------------------------*/
/* USER CODE BEGIN ExternalFunctions */
/* USER CODE END ExternalFunctions */
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
/**
* Initializes the Global MSP.
*/
void HAL_MspInit(void)
{
/* USER CODE BEGIN MspInit 0 */
/* USER CODE END MspInit 0 */
__HAL_RCC_SYSCFG_CLK_ENABLE();
__HAL_RCC_PWR_CLK_ENABLE();
/* System interrupt init*/
/* USER CODE BEGIN MspInit 1 */
/* USER CODE END MspInit 1 */
}
/**
* @brief ADC MSP Initialization
* This function configures the hardware resources used in this example
* @param hadc: ADC handle pointer
* @retval None
*/
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hadc->Instance==ADC1)
{
/* USER CODE BEGIN ADC1_MspInit 0 */
/* USER CODE END ADC1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_ADC_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**ADC1 GPIO Configuration
PA0 ------> ADC1_IN0
PA1 ------> ADC1_IN1
*/
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USER CODE BEGIN ADC1_MspInit 1 */
/* USER CODE END ADC1_MspInit 1 */
}
}
/**
* @brief ADC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hadc: ADC handle pointer
* @retval None
*/
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{
if(hadc->Instance==ADC1)
{
/* USER CODE BEGIN ADC1_MspDeInit 0 */
/* USER CODE END ADC1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_ADC_CLK_DISABLE();
/**ADC1 GPIO Configuration
PA0 ------> ADC1_IN0
PA1 ------> ADC1_IN1
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0|GPIO_PIN_1);
/* USER CODE BEGIN ADC1_MspDeInit 1 */
/* USER CODE END ADC1_MspDeInit 1 */
}
}
/**
* @brief DAC MSP Initialization
* This function configures the hardware resources used in this example
* @param hdac: DAC handle pointer
* @retval None
*/
void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hdac->Instance==DAC1)
{
/* USER CODE BEGIN DAC1_MspInit 0 */
/* USER CODE END DAC1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_DAC1_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**DAC1 GPIO Configuration
PA4 ------> DAC1_OUT1
PA5 ------> DAC1_OUT2
*/
GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USER CODE BEGIN DAC1_MspInit 1 */
/* USER CODE END DAC1_MspInit 1 */
}
}
/**
* @brief DAC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hdac: DAC handle pointer
* @retval None
*/
void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
{
if(hdac->Instance==DAC1)
{
/* USER CODE BEGIN DAC1_MspDeInit 0 */
/* USER CODE END DAC1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_DAC1_CLK_DISABLE();
/**DAC1 GPIO Configuration
PA4 ------> DAC1_OUT1
PA5 ------> DAC1_OUT2
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4|GPIO_PIN_5);
/* USER CODE BEGIN DAC1_MspDeInit 1 */
/* USER CODE END DAC1_MspDeInit 1 */
}
}
/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(huart->Instance==LPUART1)
{
/* USER CODE BEGIN LPUART1_MspInit 0 */
/* USER CODE END LPUART1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_LPUART1_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**LPUART1 GPIO Configuration
PA2 ------> LPUART1_TX
PA3 ------> LPUART1_RX
*/
GPIO_InitStruct.Pin = LPUART1_TX_Pin|LPUART1_RX_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF6_LPUART1;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* LPUART1 interrupt Init */
HAL_NVIC_SetPriority(USART3_4_LPUART1_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(USART3_4_LPUART1_IRQn);
/* USER CODE BEGIN LPUART1_MspInit 1 */
/* USER CODE END LPUART1_MspInit 1 */
}
else if(huart->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspInit 0 */
/* USER CODE END USART1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_USART1_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
/**USART1 GPIO Configuration
PC4 ------> USART1_TX
PC5 ------> USART1_RX
*/
GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF1_USART1;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* USER CODE BEGIN USART1_MspInit 1 */
/* USER CODE END USART1_MspInit 1 */
}
else if(huart->Instance==USART2)
{
/* USER CODE BEGIN USART2_MspInit 0 */
/* USER CODE END USART2_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_USART2_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
/**USART2 GPIO Configuration
PA15 ------> USART2_RX
PD5 ------> USART2_TX
*/
GPIO_InitStruct.Pin = GPIO_PIN_15;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF1_USART2;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_5;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF0_USART2;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/* USER CODE BEGIN USART2_MspInit 1 */
/* USER CODE END USART2_MspInit 1 */
}
else if(huart->Instance==USART3)
{
/* USER CODE BEGIN USART3_MspInit 0 */
/* USER CODE END USART3_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_USART3_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**USART3 GPIO Configuration
PC11 ------> USART3_RX
PB2 ------> USART3_TX
*/
GPIO_InitStruct.Pin = GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF0_USART3;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF4_USART3;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* USART3 interrupt Init */
HAL_NVIC_SetPriority(USART3_4_LPUART1_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(USART3_4_LPUART1_IRQn);
/* USER CODE BEGIN USART3_MspInit 1 */
/* USER CODE END USART3_MspInit 1 */
}
}
/**
* @brief UART MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
{
if(huart->Instance==LPUART1)
{
/* USER CODE BEGIN LPUART1_MspDeInit 0 */
/* USER CODE END LPUART1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_LPUART1_CLK_DISABLE();
/**LPUART1 GPIO Configuration
PA2 ------> LPUART1_TX
PA3 ------> LPUART1_RX
*/
HAL_GPIO_DeInit(GPIOA, LPUART1_TX_Pin|LPUART1_RX_Pin);
/* LPUART1 interrupt DeInit */
/* USER CODE BEGIN LPUART1:USART3_4_LPUART1_IRQn disable */
/**
* Uncomment the line below to disable the "USART3_4_LPUART1_IRQn" interrupt
* Be aware, disabling shared interrupt may affect other IPs
*/
/* HAL_NVIC_DisableIRQ(USART3_4_LPUART1_IRQn); */
/* USER CODE END LPUART1:USART3_4_LPUART1_IRQn disable */
/* USER CODE BEGIN LPUART1_MspDeInit 1 */
/* USER CODE END LPUART1_MspDeInit 1 */
}
else if(huart->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspDeInit 0 */
/* USER CODE END USART1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USART1_CLK_DISABLE();
/**USART1 GPIO Configuration
PC4 ------> USART1_TX
PC5 ------> USART1_RX
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_4|GPIO_PIN_5);
/* USER CODE BEGIN USART1_MspDeInit 1 */
/* USER CODE END USART1_MspDeInit 1 */
}
else if(huart->Instance==USART2)
{
/* USER CODE BEGIN USART2_MspDeInit 0 */
/* USER CODE END USART2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USART2_CLK_DISABLE();
/**USART2 GPIO Configuration
PA15 ------> USART2_RX
PD5 ------> USART2_TX
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_15);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_5);
/* USER CODE BEGIN USART2_MspDeInit 1 */
/* USER CODE END USART2_MspDeInit 1 */
}
else if(huart->Instance==USART3)
{
/* USER CODE BEGIN USART3_MspDeInit 0 */
/* USER CODE END USART3_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USART3_CLK_DISABLE();
/**USART3 GPIO Configuration
PC11 ------> USART3_RX
PB2 ------> USART3_TX
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_11);
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_2);
/* USART3 interrupt DeInit */
/* USER CODE BEGIN USART3:USART3_4_LPUART1_IRQn disable */
/**
* Uncomment the line below to disable the "USART3_4_LPUART1_IRQn" interrupt
* Be aware, disabling shared interrupt may affect other IPs
*/
/* HAL_NVIC_DisableIRQ(USART3_4_LPUART1_IRQn); */
/* USER CODE END USART3:USART3_4_LPUART1_IRQn disable */
/* USER CODE BEGIN USART3_MspDeInit 1 */
/* USER CODE END USART3_MspDeInit 1 */
}
}
/**
* @brief SPI MSP Initialization
* This function configures the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hspi->Instance==SPI1)
{
/* USER CODE BEGIN SPI1_MspInit 0 */
/* USER CODE END SPI1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI1_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
/**SPI1 GPIO Configuration
PA6 ------> SPI1_MISO
PA7 ------> SPI1_MOSI
PD8 ------> SPI1_SCK
*/
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF0_SPI1;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF1_SPI1;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/* USER CODE BEGIN SPI1_MspInit 1 */
/* USER CODE END SPI1_MspInit 1 */
}
else if(hspi->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspInit 0 */
/* USER CODE END SPI2_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI2_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**SPI2 GPIO Configuration
PC2 ------> SPI2_MISO
PC3 ------> SPI2_MOSI
PB13 ------> SPI2_SCK
*/
GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF1_SPI2;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_13;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF0_SPI2;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* USER CODE BEGIN SPI2_MspInit 1 */
/* USER CODE END SPI2_MspInit 1 */
}
}
/**
* @brief SPI MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
{
if(hspi->Instance==SPI1)
{
/* USER CODE BEGIN SPI1_MspDeInit 0 */
/* USER CODE END SPI1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI1_CLK_DISABLE();
/**SPI1 GPIO Configuration
PA6 ------> SPI1_MISO
PA7 ------> SPI1_MOSI
PD8 ------> SPI1_SCK
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_6|GPIO_PIN_7);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8);
/* USER CODE BEGIN SPI1_MspDeInit 1 */
/* USER CODE END SPI1_MspDeInit 1 */
}
else if(hspi->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspDeInit 0 */
/* USER CODE END SPI2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI2_CLK_DISABLE();
/**SPI2 GPIO Configuration
PC2 ------> SPI2_MISO
PC3 ------> SPI2_MOSI
PB13 ------> SPI2_SCK
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2|GPIO_PIN_3);
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13);
/* USER CODE BEGIN SPI2_MspDeInit 1 */
/* USER CODE END SPI2_MspDeInit 1 */
}
}
/**
* @brief TIM_Base MSP Initialization
* This function configures the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
{
if(htim_base->Instance==TIM2)
{
/* USER CODE BEGIN TIM2_MspInit 0 */
/* USER CODE END TIM2_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_TIM2_CLK_ENABLE();
/* USER CODE BEGIN TIM2_MspInit 1 */
/* USER CODE END TIM2_MspInit 1 */
}
else if(htim_base->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspInit 0 */
/* USER CODE END TIM3_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_TIM3_CLK_ENABLE();
/* USER CODE BEGIN TIM3_MspInit 1 */
/* USER CODE END TIM3_MspInit 1 */
}
}
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(htim->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspPostInit 0 */
/* USER CODE END TIM3_MspPostInit 0 */
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
/**TIM3 GPIO Configuration
PB0 ------> TIM3_CH3
PB1 ------> TIM3_CH4
PC6 ------> TIM3_CH1
PC7 ------> TIM3_CH2
*/
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF1_TIM3;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF1_TIM3;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* USER CODE BEGIN TIM3_MspPostInit 1 */
/* USER CODE END TIM3_MspPostInit 1 */
}
}
/**
* @brief TIM_Base MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
{
if(htim_base->Instance==TIM2)
{
/* USER CODE BEGIN TIM2_MspDeInit 0 */
/* USER CODE END TIM2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_TIM2_CLK_DISABLE();
/* USER CODE BEGIN TIM2_MspDeInit 1 */
/* USER CODE END TIM2_MspDeInit 1 */
}
else if(htim_base->Instance==TIM3)
{
/* USER CODE BEGIN TIM3_MspDeInit 0 */
/* USER CODE END TIM3_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_TIM3_CLK_DISABLE();
/* USER CODE BEGIN TIM3_MspDeInit 1 */
/* USER CODE END TIM3_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_it.c 0 → 100644
浏览文件 @ 317fbd42
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file stm32g0xx_it.c
* @brief Interrupt Service Routines.
******************************************************************************
*
* COPYRIGHT(c) 2019 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "stm32g0xx_it.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */
/* USER CODE END TD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/* External variables --------------------------------------------------------*/
extern UART_HandleTypeDef hlpuart1;
extern UART_HandleTypeDef huart3;
/* USER CODE BEGIN EV */
/* USER CODE END EV */
/******************************************************************************/
/* Cortex Processor Interruption and Exception Handlers */
/******************************************************************************/
/**
* @brief This function handles Non maskable interrupt.
*/
void NMI_Handler(void)
{
/* USER CODE BEGIN NonMaskableInt_IRQn 0 */
/* USER CODE END NonMaskableInt_IRQn 0 */
/* USER CODE BEGIN NonMaskableInt_IRQn 1 */
/* USER CODE END NonMaskableInt_IRQn 1 */
}
/**
* @brief This function handles Hard fault interrupt.
*/
void HardFault_Handler(void)
{
/* USER CODE BEGIN HardFault_IRQn 0 */
/* USER CODE END HardFault_IRQn 0 */
while (1)
{
/* USER CODE BEGIN W1_HardFault_IRQn 0 */
/* USER CODE END W1_HardFault_IRQn 0 */
}
}
/**
* @brief This function handles System service call via SWI instruction.
*/
void SVC_Handler(void)
{
/* USER CODE BEGIN SVC_IRQn 0 */
/* USER CODE END SVC_IRQn 0 */
/* USER CODE BEGIN SVC_IRQn 1 */
/* USER CODE END SVC_IRQn 1 */
}
/**
* @brief This function handles Pendable request for system service.
*/
void PendSV_Handler(void)
{
/* USER CODE BEGIN PendSV_IRQn 0 */
/* USER CODE END PendSV_IRQn 0 */
/* USER CODE BEGIN PendSV_IRQn 1 */
/* USER CODE END PendSV_IRQn 1 */
}
/**
* @brief This function handles System tick timer.
*/
void SysTick_Handler(void)
{
/* USER CODE BEGIN SysTick_IRQn 0 */
/* USER CODE END SysTick_IRQn 0 */
HAL_IncTick();
/* USER CODE BEGIN SysTick_IRQn 1 */
/* USER CODE END SysTick_IRQn 1 */
}
/******************************************************************************/
/* STM32G0xx Peripheral Interrupt Handlers */
/* Add here the Interrupt Handlers for the used peripherals. */
/* For the available peripheral interrupt handler names, */
/* please refer to the startup file (startup_stm32g0xx.s). */
/******************************************************************************/
/**
* @brief This function handles USART3, USART4 and LPUART1 interrupts / LPUART1 wake-up interrupt through EXTI line 28.
*/
void USART3_4_LPUART1_IRQHandler(void)
{
/* USER CODE BEGIN USART3_4_LPUART1_IRQn 0 */
/* USER CODE END USART3_4_LPUART1_IRQn 0 */
HAL_UART_IRQHandler(&huart3);
HAL_UART_IRQHandler(&hlpuart1);
/* USER CODE BEGIN USART3_4_LPUART1_IRQn 1 */
/* USER CODE END USART3_4_LPUART1_IRQn 1 */
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/Src/system_stm32g0xx.c 0 → 100644
浏览文件 @ 317fbd42
/**
******************************************************************************
* @file system_stm32g0xx.c
* @author MCD Application Team
* @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File
*
* This file provides two functions and one global variable to be called from
* user application:
* - SystemInit(): This function is called at startup just after reset and
* before branch to main program. This call is made inside
* the "startup_stm32g0xx.s" file.
*
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
* by the user application to setup the SysTick
* timer or configure other parameters.
*
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
* be called whenever the core clock is changed
* during program execution.
*
* After each device reset the HSI (8 MHz then 16 MHz) is used as system clock source.
* Then SystemInit() function is called, in "startup_stm32g0xx.s" file, to
* configure the system clock before to branch to main program.
*
* This file configures the system clock as follows:
*=============================================================================
*-----------------------------------------------------------------------------
* System Clock source | HSI
*-----------------------------------------------------------------------------
* SYSCLK(Hz) | 16000000
*-----------------------------------------------------------------------------
* HCLK(Hz) | 16000000
*-----------------------------------------------------------------------------
* AHB Prescaler | 1
*-----------------------------------------------------------------------------
* APB Prescaler | 1
*-----------------------------------------------------------------------------
* HSI Division factor | 1
*-----------------------------------------------------------------------------
* PLL_M | 1
*-----------------------------------------------------------------------------
* PLL_N | 8
*-----------------------------------------------------------------------------
* PLL_P | 7
*-----------------------------------------------------------------------------
* PLL_Q | 2
*-----------------------------------------------------------------------------
* PLL_R | 2
*-----------------------------------------------------------------------------
* Require 48MHz for RNG | Disabled
*-----------------------------------------------------------------------------
*=============================================================================
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/** @addtogroup CMSIS
* @{
*/
/** @addtogroup stm32g0xx_system
* @{
*/
/** @addtogroup STM32G0xx_System_Private_Includes
* @{
*/
#include "stm32g0xx.h"
#if !defined (HSE_VALUE)
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSI_VALUE)
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
#if !defined (LSI_VALUE)
#define LSI_VALUE 32000U /*!< Value of LSI in Hz*/
#endif /* LSI_VALUE */
#if !defined (LSE_VALUE)
#define LSE_VALUE 32768U /*!< Value of LSE in Hz*/
#endif /* LSE_VALUE */
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_Defines
* @{
*/
/************************* Miscellaneous Configuration ************************/
/*!< Uncomment the following line if you need to relocate your vector Table in
Internal SRAM. */
/* #define VECT_TAB_SRAM */
#define VECT_TAB_OFFSET 0x0U /*!< Vector Table base offset field.
This value must be a multiple of 0x100. */
/******************************************************************************/
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_Macros
* @{
*/
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_Variables
* @{
*/
/* The SystemCoreClock variable is updated in three ways:
1) by calling CMSIS function SystemCoreClockUpdate()
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
Note: If you use this function to configure the system clock; then there
is no need to call the 2 first functions listed above, since SystemCoreClock
variable is updated automatically.
*/
uint32_t SystemCoreClock = 16000000U;
const uint32_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U};
const uint32_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U};
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @addtogroup STM32G0xx_System_Private_Functions
* @{
*/
/**
* @brief Setup the microcontroller system.
* @param None
* @retval None
*/
void SystemInit(void)
{
/* Configure the Vector Table location add offset address ------------------*/
#ifdef VECT_TAB_SRAM
SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
#else
SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
#endif
}
/**
* @brief Update SystemCoreClock variable according to Clock Register Values.
* The SystemCoreClock variable contains the core clock (HCLK), it can
* be used by the user application to setup the SysTick timer or configure
* other parameters.
*
* @note Each time the core clock (HCLK) changes, this function must be called
* to update SystemCoreClock variable value. Otherwise, any configuration
* based on this variable will be incorrect.
*
* @note - The system frequency computed by this function is not the real
* frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
*
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) / HSI division factor
*
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
*
* - If SYSCLK source is LSI, SystemCoreClock will contain the LSI_VALUE
*
* - If SYSCLK source is LSE, SystemCoreClock will contain the LSE_VALUE
*
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
* or HSI_VALUE(*) multiplied/divided by the PLL factors.
*
* (**) HSI_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value
* 16 MHz) but the real value may vary depending on the variations
* in voltage and temperature.
*
* (***) HSE_VALUE is a constant defined in stm32g0xx_hal_conf.h file (default value
* 8 MHz), user has to ensure that HSE_VALUE is same as the real
* frequency of the crystal used. Otherwise, this function may
* have wrong result.
*
* - The result of this function could be not correct when using fractional
* value for HSE crystal.
*
* @param None
* @retval None
*/
void SystemCoreClockUpdate(void)
{
uint32_t tmp;
uint32_t pllvco;
uint32_t pllr;
uint32_t pllsource;
uint32_t pllm;
uint32_t hsidiv;
/* Get SYSCLK source -------------------------------------------------------*/
switch (RCC->CFGR & RCC_CFGR_SWS)
{
case RCC_CFGR_SWS_HSE: /* HSE used as system clock */
SystemCoreClock = HSE_VALUE;
break;
case RCC_CFGR_SWS_LSI: /* LSI used as system clock */
SystemCoreClock = LSI_VALUE;
break;
case RCC_CFGR_SWS_LSE: /* LSE used as system clock */
SystemCoreClock = LSE_VALUE;
break;
case RCC_CFGR_SWS_PLL: /* PLL used as system clock */
{
pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U;
switch (pllsource)
{
case 0x03: /* HSE used as PLL clock source */
pllvco = (HSE_VALUE / pllm);
break;
case 0x02: /* HSI used as PLL clock source */
default:
pllvco = (HSI_VALUE / pllm);
break;
}
pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1U);
SystemCoreClock = pllvco/pllr;
break;
}
case RCC_CFGR_SWS_HSI: /* HSI used as system clock */
default: /* HSI used as system clock */
hsidiv = (1UL << ((READ_BIT(RCC->CR, RCC_CR_HSIDIV))>> RCC_CR_HSIDIV_Pos));
SystemCoreClock = (HSI_VALUE/hsidiv);
break;
}
/* Compute HCLK clock frequency --------------------------------------------*/
/* Get HCLK prescaler */
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos)];
/* HCLK clock frequency */
SystemCoreClock >>= tmp;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
bsp/stm32/stm32g071-st-nucleo/board/CubeMX_Config/stm32g071rbt6.ioc 0 → 100644
浏览文件 @ 317fbd42
#MicroXplorer Configuration settings - do not modify
ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_0
ADC1.ClockPrescaler=ADC_CLOCK_ASYNC_DIV8
ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag,ClockPrescaler,master
ADC1.NbrOfConversionFlag=1
ADC1.Rank-0\#ChannelRegularConversion=1
ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1
ADC1.master=1
DAC1.DAC_Channel-DAC_OUT2=DAC_CHANNEL_2
DAC1.IPParameters=DAC_Channel-DAC_OUT2
File.Version=6
KeepUserPlacement=true
LPUART1.BaudRate=115200
LPUART1.FifoMode=UART_FIFOMODE_DISABLE
LPUART1.IPParameters=BaudRate,WordLength,FifoMode
LPUART1.WordLength=UART_WORDLENGTH_8B
Mcu.Family=STM32G0
Mcu.IP0=ADC1
Mcu.IP1=DAC1
Mcu.IP10=USART1
Mcu.IP11=USART2
Mcu.IP12=USART3
Mcu.IP2=LPUART1
Mcu.IP3=NVIC
Mcu.IP4=RCC
Mcu.IP5=SPI1
Mcu.IP6=SPI2
Mcu.IP7=SYS
Mcu.IP8=TIM2
Mcu.IP9=TIM3
Mcu.IPNb=13
Mcu.Name=STM32G071R(6-8-B)Tx
Mcu.Package=LQFP64
Mcu.Pin0=PC11
Mcu.Pin1=PC13
Mcu.Pin10=PA3
Mcu.Pin11=PA4
Mcu.Pin12=PA5
Mcu.Pin13=PA6
Mcu.Pin14=PA7
Mcu.Pin15=PC4
Mcu.Pin16=PC5
Mcu.Pin17=PB0
Mcu.Pin18=PB1
Mcu.Pin19=PB2
Mcu.Pin2=PC14-OSC32_IN (PC14)
Mcu.Pin20=PB13
Mcu.Pin21=PC6
Mcu.Pin22=PC7
Mcu.Pin23=PD8
Mcu.Pin24=PA13
Mcu.Pin25=PA14-BOOT0
Mcu.Pin26=PA15
Mcu.Pin27=PD5
Mcu.Pin28=VP_SYS_VS_Systick
Mcu.Pin29=VP_TIM2_VS_ClockSourceINT
Mcu.Pin3=PC15-OSC32_OUT (PC15)
Mcu.Pin30=VP_TIM3_VS_ClockSourceINT
Mcu.Pin4=PF0-OSC_IN (PF0)
Mcu.Pin5=PC2
Mcu.Pin6=PC3
Mcu.Pin7=PA0
Mcu.Pin8=PA1
Mcu.Pin9=PA2
Mcu.PinsNb=31
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32G071RBTx
MxCube.Version=5.0.1
MxDb.Version=DB.5.0.1
NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false
NVIC.USART3_4_LPUART1_IRQn=true\:0\:0\:false\:false\:true\:true
PA0.Mode=IN0
PA0.Signal=ADC1_IN0
PA1.Mode=IN1
PA1.Signal=ADC1_IN1
PA13.GPIOParameters=GPIO_Label
PA13.GPIO_Label=TMS
PA13.Locked=true
PA13.Mode=Serial_Wire
PA13.Signal=SYS_SWDIO
PA14-BOOT0.GPIOParameters=GPIO_Label
PA14-BOOT0.GPIO_Label=TCK
PA14-BOOT0.Locked=true
PA14-BOOT0.Mode=Serial_Wire
PA14-BOOT0.Signal=SYS_SWCLK
PA15.Mode=Asynchronous
PA15.Signal=USART2_RX
PA2.GPIOParameters=GPIO_Label
PA2.GPIO_Label=LPUART1_TX
PA2.Locked=true
PA2.Mode=Asynchronous
PA2.Signal=LPUART1_TX
PA3.GPIOParameters=GPIO_Label
PA3.GPIO_Label=LPUART1_RX
PA3.Locked=true
PA3.Mode=Asynchronous
PA3.Signal=LPUART1_RX
PA4.Signal=COMP_DAC11_group
PA5.Signal=COMP_DAC12_group
PA6.Mode=Full_Duplex_Master
PA6.Signal=SPI1_MISO
PA7.Mode=Full_Duplex_Master
PA7.Signal=SPI1_MOSI
PB0.Signal=S_TIM3_CH3
PB1.Signal=S_TIM3_CH4
PB13.Mode=Full_Duplex_Master
PB13.Signal=SPI2_SCK
PB2.Mode=Asynchronous
PB2.Signal=USART3_TX
PC11.Mode=Asynchronous
PC11.Signal=USART3_RX
PC13.Locked=true
PC13.Mode=SYS_WakeUp1
PC13.Signal=SYS_WKUP2
PC14-OSC32_IN\ (PC14).Locked=true
PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
PC15-OSC32_OUT\ (PC15).Locked=true
PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
PC2.Mode=Full_Duplex_Master
PC2.Signal=SPI2_MISO
PC3.Mode=Full_Duplex_Master
PC3.Signal=SPI2_MOSI
PC4.Mode=Asynchronous
PC4.Signal=USART1_TX
PC5.Mode=Asynchronous
PC5.Signal=USART1_RX
PC6.Signal=S_TIM3_CH1
PC7.Signal=S_TIM3_CH2
PCC.Checker=true
PCC.Line=STM32G0x1
PCC.MCU=STM32G071R(6-8-B)Tx
PCC.PartNumber=STM32G071RBTx
PCC.Seq0=0
PCC.Series=STM32G0
PCC.Temperature=25
PCC.Vdd=null
PD5.Mode=Asynchronous
PD5.Signal=USART2_TX
PD8.Mode=Full_Duplex_Master
PD8.Signal=SPI1_SCK
PF0-OSC_IN\ (PF0).GPIOParameters=GPIO_Label
PF0-OSC_IN\ (PF0).GPIO_Label=MCO
PF0-OSC_IN\ (PF0).Locked=true
PF0-OSC_IN\ (PF0).Mode=HSE-External-Clock-Source
PF0-OSC_IN\ (PF0).Signal=RCC_OSC_IN
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
ProjectManager.BackupPrevious=false
ProjectManager.CompilerOptimize=6
ProjectManager.ComputerToolchain=false
ProjectManager.CoupleFile=false
ProjectManager.CustomerFirmwarePackage=
ProjectManager.DefaultFWLocation=true
ProjectManager.DeletePrevious=true
ProjectManager.DeviceId=STM32G071RBTx
ProjectManager.FirmwarePackage=STM32Cube FW_G0 V1.0.0
ProjectManager.FreePins=false
ProjectManager.HalAssertFull=false
ProjectManager.HeapSize=0x200
ProjectManager.KeepUserCode=true
ProjectManager.LastFirmware=true
ProjectManager.LibraryCopy=0
ProjectManager.MainLocation=Src
ProjectManager.NoMain=false
ProjectManager.PreviousToolchain=
ProjectManager.ProjectBuild=false
ProjectManager.ProjectFileName=stm32g071rbt6.ioc
ProjectManager.ProjectName=stm32g071rbt6
ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=MDK-ARM V5
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-MX_DMA_Init-DMA-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_LPUART1_UART_Init-LPUART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_TIM2_Init-TIM2-false-HAL-true,6-MX_TIM3_Init-TIM3-false-HAL-true,7-MX_USART1_UART_Init-USART1-false-HAL-true,8-MX_USART2_UART_Init-USART2-false-HAL-true,9-MX_USART3_UART_Init-USART3-false-HAL-true,10-MX_SPI1_Init-SPI1-false-HAL-true,11-MX_SPI2_Init-SPI2-false-HAL-true,12-MX_DAC1_Init-DAC1-false-HAL-true
RCC.ADCFreq_Value=64000000
RCC.AHBFreq_Value=64000000
RCC.APBFreq_Value=64000000
RCC.APBTimFreq_Value=64000000
RCC.CECFreq_Value=32786.88524590164
RCC.CortexFreq_Value=64000000
RCC.EXTERNAL_CLOCK_VALUE=12288000
RCC.FCLKCortexFreq_Value=64000000
RCC.FamilyName=M
RCC.HCLKFreq_Value=64000000
RCC.HSE_VALUE=8000000
RCC.HSI_VALUE=16000000
RCC.I2C1Freq_Value=64000000
RCC.I2S1Freq_Value=64000000
RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APBFreq_Value,APBTimFreq_Value,CECFreq_Value,CortexFreq_Value,EXTERNAL_CLOCK_VALUE,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2S1Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PWRFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,TIM15Freq_Value,TIM1Freq_Value,USART1Freq_Value,USART2Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value
RCC.LPTIM1Freq_Value=64000000
RCC.LPTIM2Freq_Value=64000000
RCC.LPUART1Freq_Value=64000000
RCC.LSCOPinFreq_Value=32000
RCC.LSI_VALUE=32000
RCC.MCO1PinFreq_Value=64000000
RCC.PLLPoutputFreq_Value=64000000
RCC.PLLQoutputFreq_Value=64000000
RCC.PLLRCLKFreq_Value=64000000
RCC.PWRFreq_Value=64000000
RCC.SYSCLKFreq_VALUE=64000000
RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
RCC.TIM15Freq_Value=64000000
RCC.TIM1Freq_Value=64000000
RCC.USART1Freq_Value=64000000
RCC.USART2Freq_Value=64000000
RCC.VCOInputFreq_Value=16000000
RCC.VCOOutputFreq_Value=128000000
SH.COMP_DAC11_group.0=DAC1_OUT1,DAC_OUT1
SH.COMP_DAC11_group.ConfNb=1
SH.COMP_DAC12_group.0=DAC1_OUT2,DAC_OUT2
SH.COMP_DAC12_group.ConfNb=1
SH.S_TIM3_CH1.0=TIM3_CH1,Output Compare1 CH1
SH.S_TIM3_CH1.ConfNb=1
SH.S_TIM3_CH2.0=TIM3_CH2,Output Compare2 CH2
SH.S_TIM3_CH2.ConfNb=1
SH.S_TIM3_CH3.0=TIM3_CH3,Output Compare3 CH3
SH.S_TIM3_CH3.ConfNb=1
SH.S_TIM3_CH4.0=TIM3_CH4,Output Compare4 CH4
SH.S_TIM3_CH4.ConfNb=1
SPI1.CalculateBaudRate=32.0 MBits/s
SPI1.Direction=SPI_DIRECTION_2LINES
SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
SPI1.Mode=SPI_MODE_MASTER
SPI1.VirtualType=VM_MASTER
SPI2.CalculateBaudRate=32.0 MBits/s
SPI2.Direction=SPI_DIRECTION_2LINES
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
SPI2.Mode=SPI_MODE_MASTER
SPI2.VirtualType=VM_MASTER
TIM3.Channel-Output\ Compare1\ CH1=TIM_CHANNEL_1
TIM3.Channel-Output\ Compare2\ CH2=TIM_CHANNEL_2
TIM3.Channel-Output\ Compare3\ CH3=TIM_CHANNEL_3
TIM3.Channel-Output\ Compare4\ CH4=TIM_CHANNEL_4
TIM3.IPParameters=Channel-Output Compare1 CH1,Channel-Output Compare2 CH2,Channel-Output Compare3 CH3,Channel-Output Compare4 CH4,OCPolarity_1,OCPolarity_2,OCPolarity_3,OCPolarity_4
TIM3.OCPolarity_1=TIM_OCPOLARITY_HIGH
TIM3.OCPolarity_2=TIM_OCPOLARITY_HIGH
TIM3.OCPolarity_3=TIM_OCPOLARITY_HIGH
TIM3.OCPolarity_4=TIM_OCPOLARITY_HIGH
USART1.IPParameters=VirtualMode-Asynchronous
USART1.VirtualMode-Asynchronous=VM_ASYNC
USART2.IPParameters=VirtualMode-Asynchronous
USART2.VirtualMode-Asynchronous=VM_ASYNC
USART3.IPParameters=VirtualMode-Asynchronous
USART3.VirtualMode-Asynchronous=VM_ASYNC
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
VP_TIM2_VS_ClockSourceINT.Mode=Internal
VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
VP_TIM3_VS_ClockSourceINT.Mode=Internal
VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT
board=NUCLEO-G071RB
boardIOC=true
bsp/stm32/stm32g071-st-nucleo/board/Kconfig 0 → 100644
浏览文件 @ 317fbd42
menu "Hardware Drivers Config"
config SOC_STM32G071RB
bool
select SOC_SERIES_STM32G0
default y
menu "Onboard Peripheral Drivers"
config BSP_USING_USB_TO_USART
bool "Enable USB TO USART (lpuart1)"
select BSP_USING_LPUART1
default y
endmenu
menu "On-chip Peripheral Drivers"
config BSP_USING_GPIO
bool "Enable GPIO"
select RT_USING_PIN
default y
menuconfig BSP_USING_UART
bool "Enable UART"
default y
select RT_USING_SERIAL
if BSP_USING_UART
config BSP_USING_LPUART1
bool "Enable LPUART1"
default y
config BSP_LPUART1_RX_USING_DMA
bool "Enable LPUART1 RX DMA"
depends on BSP_USING_LPUART1 && RT_SERIAL_USING_DMA
default n
config BSP_USING_UART1
bool "Enable UART1"
default n
config BSP_UART1_RX_USING_DMA
bool "Enable UART1 RX DMA"
depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
default n
config BSP_USING_UART2
bool "Enable UART2"
default n
config BSP_UART2_RX_USING_DMA
bool "Enable UART2 RX DMA"
depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
default n
endif
endmenu
menu "Board extended module Drivers"
endmenu
endmenu
bsp/stm32/stm32g071-st-nucleo/board/SConscript 0 → 100644
浏览文件 @ 317fbd42
import os
import rtconfig
from building import *
Import('SDK_LIB')
cwd = GetCurrentDir()
# add general drivers
src = Split('''
board.c
CubeMX_Config/Src/stm32g0xx_hal_msp.c
''')
path = [cwd]
path += [cwd + '/CubeMX_Config/Inc']
startup_path_prefix = SDK_LIB
if rtconfig.CROSS_TOOL == 'gcc':
src += [startup_path_prefix + '/STM32G0xx_HAL/CMSIS/ST/STM32G0xx/Source/Templates/gcc/startup_stm32g071xx.s']
elif rtconfig.CROSS_TOOL == 'keil':
src += [startup_path_prefix + '/STM32G0xx_HAL/CMSIS/ST/STM32G0xx/Source/Templates/arm/startup_stm32g071xx.s']
elif rtconfig.CROSS_TOOL == 'iar':
src += [startup_path_prefix + '/STM32G0xx_HAL/CMSIS/ST/STM32G0xx/Source/Templates/iar/startup_stm32g071xx.s']
CPPDEFINES = ['STM32G071xx']
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
Return('group')
bsp/stm32/stm32g071-st-nucleo/board/board.c 0 → 100644
浏览文件 @ 317fbd42
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift first version
*/
#include "board.h"
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
/**Configure the main internal regulator output voltage
*/
HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
RCC_OscInitStruct.PLL.PLLN = 8;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
{
Error_Handler();
}
/**Initializes the peripherals clocks
*/
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_LPUART1;
PeriphClkInit.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PCLK1;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
{
Error_Handler();
}
}
bsp/stm32/stm32g071-st-nucleo/board/board.h 0 → 100644
浏览文件 @ 317fbd42
/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-11-06 SummerGift first version
*/
#ifndef __BOARD_H__
#define __BOARD_H__
#include <rtthread.h>
#include <stm32g0xx.h>
#include "drv_common.h"
#include "drv_gpio.h"
#ifdef __cplusplus
extern "C" {
#endif
#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000)
#define STM32_FLASH_SIZE (128 * 1024)
#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE))
/* Internal SRAM memory size[Kbytes] <8-64>, Default: 36 */
#define STM32_SRAM_SIZE 36
#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024)
#ifdef __CC_ARM
extern int Image$$RW_IRAM1$$ZI$$Limit;
#define HEAP_BEGIN ((void *)&Image$$RW_IRAM1$$ZI$$Limit)
#elif __ICCARM__
#pragma section="CSTACK"
#define HEAP_BEGIN (__segment_end("CSTACK"))
#else
extern int __bss_end;
#define HEAP_BEGIN ((void *)&__bss_end)
#endif
#define HEAP_END STM32_SRAM_END
void SystemClock_Config(void);
#ifdef __cplusplus
}
#endif
#endif /* __BOARD_H__ */
bsp/stm32/stm32g071-st-nucleo/board/linker_scripts/link.icf 0 → 100644
浏览文件 @ 317fbd42
/*###ICF### Section handled by ICF editor, don't touch! ****/
/*-Editor annotation file-*/
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
/*-Specials-*/
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x08020000;
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
define symbol __ICFEDIT_region_RAM_end__ = 0x20009000;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x0200;
define symbol __ICFEDIT_size_heap__ = 0x0000;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
initialize by copy { readwrite };
do not initialize { section .noinit };
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite, last block CSTACK};
\ No newline at end of file
bsp/stm32/stm32g071-st-nucleo/board/linker_scripts/link.lds 0 → 100644
浏览文件 @ 317fbd42
/*
* linker script for STM32FG0x with GNU ld
*/
/* Program Entry, set to mark it as "used" and avoid gc */
MEMORY
{
ROM (rx) : ORIGIN = 0x08000000, LENGTH = 128k /* 128KB flash */
RAM (rw) : ORIGIN = 0x20000000, LENGTH = 36k /* 36K sram */
}
ENTRY(Reset_Handler)
_system_stack_size = 0x200;
SECTIONS
{
.text :
{
. = ALIGN(4);
_stext = .;
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
*(.text) /* remaining code */
*(.text.*) /* remaining code */
*(.rodata) /* read-only data (constants) */
*(.rodata*)
*(.glue_7)
*(.glue_7t)
*(.gnu.linkonce.t*)
/* section information for finsh shell */
. = ALIGN(4);
__fsymtab_start = .;
KEEP(*(FSymTab))
__fsymtab_end = .;
. = ALIGN(4);
__vsymtab_start = .;
KEEP(*(VSymTab))
__vsymtab_end = .;
/* section information for initial. */
. = ALIGN(4);
__rt_init_start = .;
KEEP(*(SORT(.rti_fn*)))
__rt_init_end = .;
. = ALIGN(4);
_etext = .;
} > ROM = 0
/* .ARM.exidx is sorted, so has to go in its own output section. */
__exidx_start = .;
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
/* This is used by the startup in order to initialize the .data secion */
_sidata = .;
} > ROM
__exidx_end = .;
/* .data section which is used for initialized data */
.data : AT (_sidata)
{
. = ALIGN(4);
/* This is used by the startup in order to initialize the .data secion */
_sdata = . ;
*(.data)
*(.data.*)
*(.gnu.linkonce.d*)
. = ALIGN(4);
/* This is used by the startup in order to initialize the .data secion */
_edata = . ;
} >RAM
.stack :
{
. = ALIGN(4);
_sstack = .;
. = . + _system_stack_size;
. = ALIGN(4);
_estack = .;
} >RAM
__bss_start = .;
.bss :
{
. = ALIGN(4);
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .;
*(.bss)
*(.bss.*)
*(COMMON)
. = ALIGN(4);
/* This is used by the startup in order to initialize the .bss secion */
_ebss = . ;
*(.bss.init)
} > RAM
__bss_end = .;
_end = .;
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
* Symbols in the DWARF debugging sections are relative to the beginning
* of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
}
bsp/stm32/stm32g071-st-nucleo/board/linker_scripts/link.sct 0 → 100644
浏览文件 @ 317fbd42
; *************************************************************
; *** Scatter-Loading Description File generated by uVision ***
; *************************************************************
LR_IROM1 0x08000000 0x00020000 { ; load region size_region
ER_IROM1 0x08000000 0x00020000 { ; load address = execution address
*.o (RESET, +First)
*(InRoot$$Sections)
.ANY (+RO)
.ANY (+XO)
}
RW_IRAM1 0x20000000 0x00009000 { ; RW data
.ANY (+RW +ZI)
}
}
bsp/stm32/stm32g071-st-nucleo/project.ewp 0 → 100644
浏览文件 @ 317fbd42
此差异已折叠。
bsp/stm32/stm32g071-st-nucleo/project.eww 0 → 100644
浏览文件 @ 317fbd42
<?xml version="1.0" encoding="iso-8859-1"?>
<workspace>
<project>
<path>$WS_DIR$\project.ewp</path>
</project>
<batchBuild/>
</workspace>
bsp/stm32/stm32g071-st-nucleo/project.uvprojx 0 → 100644
浏览文件 @ 317fbd42
此差异已折叠。
bsp/stm32/stm32g071-st-nucleo/rtconfig.h 0 → 100644
浏览文件 @ 317fbd42
此差异已折叠。
bsp/stm32/stm32g071-st-nucleo/rtconfig.py 0 → 100644
浏览文件 @ 317fbd42
此差异已折叠。
bsp/stm32/stm32g071-st-nucleo/template.ewp 0 → 100644
浏览文件 @ 317fbd42
此差异已折叠。
bsp/stm32/stm32g071-st-nucleo/template.eww 0 → 100644
浏览文件 @ 317fbd42
此差异已折叠。
bsp/stm32/stm32g071-st-nucleo/template.uvprojx 0 → 100644
浏览文件 @ 317fbd42
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或