- 18 3月, 2023 1 次提交
-
-
由 anand76 提交于
Summary: In PosixFileSystem, IO uring support is opt-in. If the support is not enabled by the user, then ignore the async_io ReadOption in MultiGet and iteration at the top, rather than follow the async_io codepath and transparently switch to sync IO at the FileSystem layer. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11296 Test Plan: Add new unit tests Reviewed By: akankshamahajan15 Differential Revision: D44045776 Pulled By: anand1976 fbshipit-source-id: a0881bf763ca2fde50b84063d0068bb521edd8b9
-
- 16 3月, 2023 1 次提交
-
-
由 Hui Xiao 提交于
Add new stat rocksdb.table.open.prefetch.tail.read.bytes, rocksdb.table.open.prefetch.tail.{miss|hit} (#11265) Summary: **Context/Summary:** We are adding new stats to measure behavior of prefetched tail size and look up into this buffer The stat collection is done in FilePrefetchBuffer but only for prefetched tail buffer during table open for now using FilePrefetchBuffer enum. It's cleaner than the alternative of implementing in upper-level call places of FilePrefetchBuffer for table open. It also has the benefit of extensible to other types of FilePrefetchBuffer if needed. See db bench for perf regression concern. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11265 Test Plan: **- Piggyback on existing test** **- rocksdb.table.open.prefetch.tail.miss is harder to UT so I manually set prefetch tail read bytes to be small and run db bench.** ``` ./db_bench -db=/tmp/testdb -statistics=true -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000 -write_buffer_size=655 -target_file_size_base=655 -disable_auto_compactions=false -compression_type=none -bloom_bits=3 -use_direct_reads=true ``` ``` rocksdb.table.open.prefetch.tail.read.bytes P50 : 4096.000000 P95 : 4096.000000 P99 : 4096.000000 P100 : 4096.000000 COUNT : 225 SUM : 921600 rocksdb.table.open.prefetch.tail.miss COUNT : 91 rocksdb.table.open.prefetch.tail.hit COUNT : 1034 ``` **- No perf regression observed in db_bench** SETUP command: create same db with ~900 files for pre-change/post-change. ``` ./db_bench -db=/tmp/testdb -benchmarks="fillseq" -key_size=32 -value_size=512 -num=500000 -write_buffer_size=655360 -disable_auto_compactions=true -target_file_size_base=16777216 -compression_type=none ``` TEST command 60 runs or til convergence: as suggested by anand1976 and akankshamahajan15, vary `seek_nexts` and `async_io` in testing. ``` ./db_bench -use_existing_db=true -db=/tmp/testdb -statistics=false -cache_size=0 -cache_index_and_filter_blocks=false -benchmarks=seekrandom[-X60] -num=50000 -seek_nexts={10, 500, 1000} -async_io={0|1} -use_direct_reads=true ``` async io = 0, direct io read = true | seek_nexts = 10, 30 runs | seek_nexts = 500, 12 runs | seek_nexts = 1000, 6 runs -- | -- | -- | -- pre-post change | 4776 (± 28) ops/sec; 24.8 (± 0.1) MB/sec | 288 (± 1) ops/sec; 74.8 (± 0.4) MB/sec | 145 (± 4) ops/sec; 75.6 (± 2.2) MB/sec post-change | 4790 (± 32) ops/sec; 24.9 (± 0.2) MB/sec | 288 (± 3) ops/sec; 74.7 (± 0.8) MB/sec | 143 (± 3) ops/sec; 74.5 (± 1.6) MB/sec async io = 1, direct io read = true | seek_nexts = 10, 54 runs | seek_nexts = 500, 6 runs | seek_nexts = 1000, 4 runs -- | -- | -- | -- pre-post change | 3350 (± 36) ops/sec; 17.4 (± 0.2) MB/sec | 264 (± 0) ops/sec; 68.7 (± 0.2) MB/sec | 138 (± 1) ops/sec; 71.8 (± 1.0) MB/sec post-change | 3358 (± 27) ops/sec; 17.4 (± 0.1) MB/sec | 263 (± 2) ops/sec; 68.3 (± 0.8) MB/sec | 139 (± 1) ops/sec; 72.6 (± 0.6) MB/sec Reviewed By: ajkr Differential Revision: D43781467 Pulled By: hx235 fbshipit-source-id: a706a18472a8edb2b952bac3af40eec803537f2a
-
- 15 3月, 2023 1 次提交
-
-
由 Hui Xiao 提交于
Fix bug of prematurely excluded CF in atomic flush contains unflushed data that should've been included in the atomic flush (#11148) Summary: **Context:** Atomic flush should guarantee recoverability of all data of seqno up to the max seqno of the flush. It achieves this by ensuring all such data are flushed by the time this atomic flush finishes through `SelectColumnFamiliesForAtomicFlush()`. However, our crash test exposed the following case where an excluded CF from an atomic flush contains unflushed data of seqno less than the max seqno of that atomic flush and loses its data with `WriteOptions::DisableWAL=true` in face of a crash right after the atomic flush finishes . ``` ./db_stress --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 & pid=$! sleep 0.2 sleep 10 kill $pid sleep 0.2 ./db_stress --ops_per_thread=1 --preserve_unverified_changes=1 --reopen=0 --acquire_snapshot_one_in=0 --adaptive_readahead=1 --allow_data_in_errors=True --async_io=1 --atomic_flush=1 --avoid_flush_during_recovery=0 --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=0 --batch_protection_bytes_per_key=0 --block_size=16384 --bloom_bits=15 --bottommost_compression_type=none --bytes_per_sync=262144 --cache_index_and_filter_blocks=0 --cache_size=8388608 --cache_type=lru_cache --charge_compression_dictionary_building_buffer=0 --charge_file_metadata=1 --charge_filter_construction=0 --charge_table_reader=0 --checkpoint_one_in=0 --checksum_type=kXXH3 --clear_column_family_one_in=0 --compact_files_one_in=0 --compact_range_one_in=0 --compaction_pri=1 --compaction_ttl=100 --compression_max_dict_buffer_bytes=134217727 --compression_max_dict_bytes=16384 --compression_parallel_threads=1 --compression_type=lz4hc --compression_use_zstd_dict_trainer=0 --compression_zstd_max_train_bytes=0 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=4 --delrangepercent=1 --destroy_db_initially=0 --detect_filter_construct_corruption=0 --disable_wal=1 --enable_compaction_filter=0 --enable_pipelined_write=0 --expected_values_dir=$exp --fail_if_options_file_error=0 --fifo_allow_compaction=0 --file_checksum_impl=none --flush_one_in=0 --format_version=5 --get_current_wal_file_one_in=0 --get_live_files_one_in=100 --get_property_one_in=0 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=2 --index_type=0 --ingest_external_file_one_in=0 --initial_auto_readahead_size=524288 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --long_running_snapshots=1 --manual_wal_flush_one_in=100 --mark_for_compaction_one_file_in=0 --max_auto_readahead_size=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=1073741824 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.01 --memtable_protection_bytes_per_key=4 --memtable_whole_key_filtering=0 --memtablerep=skip_list --min_write_buffer_number_to_merge=2 --mmap_read=1 --mock_direct_io=False --nooverwritepercent=1 --num_file_reads_for_auto_readahead=0 --open_files=-1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_filters=0 --partition_pinning=3 --pause_background_one_in=0 --periodic_compaction_seconds=100 --prefix_size=8 --prefixpercent=5 --prepopulate_block_cache=0 --preserve_internal_time_seconds=3600 --progress_reports=0 --read_fault_one_in=32 --readahead_size=16384 --readpercent=50 --recycle_log_file_num=0 --ribbon_starting_level=6 --secondary_cache_fault_one_in=0 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=104857600 --sst_file_manager_bytes_per_truncate=1048576 --stats_dump_period_sec=10 --subcompactions=1 --sync=0 --sync_fault_injection=0 --target_file_size_base=524288 --target_file_size_multiplier=2 --test_batches_snapshots=0 --top_level_index_pinning=0 --unpartitioned_pinning=1 --use_direct_io_for_flush_and_compaction=0 --use_direct_reads=0 --use_full_merge_v1=0 --use_merge=0 --use_multiget=1 --use_put_entity_one_in=0 --user_timestamp_size=0 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=0 --verify_db_one_in=1000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --wal_compression=none --write_buffer_size=524288 --write_dbid_to_manifest=1 --write_fault_one_in=0 --writepercent=30 & pid=$! sleep 0.2 sleep 40 kill $pid sleep 0.2 Verification failed for column family 6 key 0000000000000239000000000000012B0000000000000138 (56622): value_from_db: , value_from_expected: 4A6331754E4F4C4D42434041464744455A5B58595E5F5C5D5253505156575455, msg: Value not found: NotFound: Crash-recovery verification failed :( No writes or ops? Verification failed :( ``` The bug is due to the following: - When atomic flush is used, an empty CF is legally [excluded](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L39) in `SelectColumnFamiliesForAtomicFlush` as the first step of `DBImpl::FlushForGetLiveFiles` before [passing](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_filesnapshot.cc#L42) the included CFDs to `AtomicFlushMemTables`. - But [later](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2133) in `AtomicFlushMemTables`, `WaitUntilFlushWouldNotStallWrites` will [release the db mutex](https://github.com/facebook/rocksdb/blob/7.10.fb/db/db_impl/db_impl_compaction_flush.cc#L2403), during which data@seqno N can be inserted into the excluded CF and data@seqno M can be inserted into one of the included CFs, where M > N. - However, data@seqno N in an already-excluded CF is thus excluded from this atomic flush while we seqno N is less than seqno M. **Summary:** - Replace `SelectColumnFamiliesForAtomicFlush()`-before-`AtomicFlushMemTables()` with `SelectColumnFamiliesForAtomicFlush()`-after-wait-within-`AtomicFlushMemTables()` so we ensure no write affecting the recoverability of this atomic job (i.e, change to max seqno of this atomic flush or insertion of data with less seqno than the max seqno of the atomic flush to excluded CF) can happen after calling `SelectColumnFamiliesForAtomicFlush()`. - For above, refactored and clarified comments on `SelectColumnFamiliesForAtomicFlush()` and `AtomicFlushMemTables()` for clearer semantics of passed-in CFDs to atomic-flush Pull Request resolved: https://github.com/facebook/rocksdb/pull/11148 Test Plan: - New unit test failed before the fix and passes after - Make check - Rehearsal stress test Reviewed By: ajkr Differential Revision: D42799871 Pulled By: hx235 fbshipit-source-id: 13636b63e9c25c5895857afc36ea580d57f6d644
-
- 14 3月, 2023 2 次提交
-
-
由 Levi Tamasi 提交于
Summary: The patch renames the counter added in https://github.com/facebook/rocksdb/issues/11284 for better consistency with the existing naming scheme. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11294 Test Plan: `make check` Reviewed By: jowlyzhang Differential Revision: D44035964 Pulled By: ltamasi fbshipit-source-id: 8b1a2a03ee728148365367e0ecc1fcf462f62191
-
由 Changyu Bi 提交于
Summary: CreateColumnFamilyWithImport() did not support range tombstones for two reasons: 1. it uses point keys of a input file to determine its boundary (smallest and largest internal key), which means range tombstones outside of the point key range will be effectively dropped. 2. it does not handle files with no point keys. Also included a fix in external_sst_file_ingestion_job.cc where the blocks read in `GetIngestedFileInfo()` can be added to block cache now (issue fixed in https://github.com/facebook/rocksdb/pull/6429). This PR adds support for exporting and importing column family with range tombstones. The main change is to add smallest internal key and largest internal key to `SstFileMetaData` that will be part of the output of `ExportColumnFamily()`. Then during `CreateColumnFamilyWithImport(...,const ExportImportFilesMetaData& metadata,...)`, file boundaries can be set from `metadata` directly. This is needed since when file boundaries are extended by range tombstones, sometimes they cannot be deduced from a file's content alone. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11252 Test Plan: - added unit tests that fails before this change Closes https://github.com/facebook/rocksdb/issues/11245 Reviewed By: ajkr Differential Revision: D43577443 Pulled By: cbi42 fbshipit-source-id: 6bff78e583cc50c44854994dea0a8dd519398f2f
-
- 09 3月, 2023 1 次提交
-
-
由 Levi Tamasi 提交于
Summary: The existing PerfContext counter `internal_merge_count` only tracks the Merge operands applied during range scans. The patch adds a new counter called `internal_merge_count_point_lookups` to track the same metric for point lookups (`Get` / `MultiGet` / `GetEntity` / `MultiGetEntity`), and also fixes a couple of cases in the iterator where the existing counter wasn't updated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11284 Test Plan: `make check` Reviewed By: jowlyzhang Differential Revision: D43926082 Pulled By: ltamasi fbshipit-source-id: 321566d8b4cf0a3b6c9b73b7a5c984fb9bb492e9
-
- 02 3月, 2023 1 次提交
-
-
由 Yu Zhang 提交于
Summary: During backward iteration, blob verification would fail because the user key (ts included) in `saved_key_` doesn't match the blob. This happens because during`FindValueForCurrentKey`, `saved_key_` is not updated when the user key(ts not included) is the same for all cases except when `timestamp_lb_` is specified. This breaks the blob verification logic when user defined timestamp is enabled and `timestamp_lb_` is not specified. Fix this by always updating `saved_key_` when a smaller user key (ts included) is seen. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11258 Test Plan: `make check` `./db_blob_basic_test --gtest_filter=DBBlobWithTimestampTest.IterateBlobs` Run db_bench (built with DEBUG_LEVEL=0) to demonstrate that no overhead is introduced with: `./db_bench -user_timestamp_size=8 -db=/dev/shm/rocksdb -disable_wal=1 -benchmarks=fillseq,seekrandom[-W1-X6] -reverse_iterator=1 -seek_nexts=5` Baseline: - seekrandom [AVG 6 runs] : 72188 (± 1481) ops/sec; 37.2 (± 0.8) MB/sec With this PR: - seekrandom [AVG 6 runs] : 74171 (± 1427) ops/sec; 38.2 (± 0.7) MB/sec Reviewed By: ltamasi Differential Revision: D43675642 Pulled By: jowlyzhang fbshipit-source-id: 8022ae8522d1f66548821855e6eed63640c14e04
-
- 01 3月, 2023 1 次提交
-
-
由 anand76 提交于
Summary: Add more stats for better visibility into the usefulness of the secondary cache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11246 Test Plan: Add a new unit test Reviewed By: akankshamahajan15 Differential Revision: D43521364 Pulled By: anand1976 fbshipit-source-id: a92f04884e738a9bf40ad4047acaaaea343838a7
-
- 23 2月, 2023 2 次提交
-
-
由 Yu Zhang 提交于
Summary: Fixed an issue during backward iteration when `iter_start_ts` is set in an integrated BlobDB. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11244 Test Plan: ```make check ./db_blob_basic_test --gtest_filter="DBBlobWithTimestampTest.IterateBlobs" tools/db_crashtest.py --stress_cmd=./db_stress --cleanup_cmd='' --enable_ts whitebox --random_kill_odd 888887 --enable_blob_files=1``` Reviewed By: ltamasi Differential Revision: D43506726 Pulled By: jowlyzhang fbshipit-source-id: 2cdc19ebf8da909d8d43d621353905784949a9f0
-
由 Changyu Bi 提交于
Summary: A second attempt after https://github.com/facebook/rocksdb/issues/10802, with bug fixes and refactoring. This PR updates compaction logic to take range tombstones into account when determining whether to cut the current compaction output file (https://github.com/facebook/rocksdb/issues/4811). Before this change, only point keys were considered, and range tombstones could cause large compactions. For example, if the current compaction outputs is a range tombstone [a, b) and 2 point keys y, z, they would be added to the same file, and may overlap with too many files in the next level and cause a large compaction in the future. This PR also includes ajkr's effort to simplify the logic to add range tombstones to compaction output files in `AddRangeDels()` ([https://github.com/facebook/rocksdb/issues/11078](https://github.com/facebook/rocksdb/pull/11078#issuecomment-1386078861)). The main change is for `CompactionIterator` to emit range tombstone start keys to be processed by `CompactionOutputs`. A new class `CompactionMergingIterator` is introduced to replace `MergingIterator` under `CompactionIterator` to enable emitting of range tombstone start keys. Further improvement after this PR include cutting compaction output at some grandparent boundary key (instead of the next output key) when cutting within a range tombstone to reduce overlap with grandparents. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11113 Test Plan: * added unit test in db_range_del_test * crash test with a small key range: `python3 tools/db_crashtest.py blackbox --simple --max_key=100 --interval=600 --write_buffer_size=262144 --target_file_size_base=256 --max_bytes_for_level_base=262144 --block_size=128 --value_size_mult=33 --subcompactions=10 --use_multiget=1 --delpercent=3 --delrangepercent=2 --verify_iterator_with_expected_state_one_in=2 --num_iterations=10` Reviewed By: ajkr Differential Revision: D42655709 Pulled By: cbi42 fbshipit-source-id: 8367e36ef5640e8f21c14a3855d4a8d6e360a34c
-
- 22 2月, 2023 1 次提交
-
-
由 Andrew Kryczka 提交于
Summary: 8.0.fb branch is cut so changes going forward will be part of 8.1. Updated version.h and HISTORY.md accordingly Pull Request resolved: https://github.com/facebook/rocksdb/pull/11238 Reviewed By: cbi42 Differential Revision: D43428345 Pulled By: ajkr fbshipit-source-id: d344b6e504c81a85563ae9d3705b11c533b1cd43
-
- 18 2月, 2023 2 次提交
-
-
由 mrambacher 提交于
Summary: The primary purpose of the FactoryFunc was to support LITE mode where the ObjectRegistry was not available. With the removal of LITE mode, the function was no longer required. Note that the MergeOperator had some private classes defined in header files. To gain access to their constructors (and name methods), the class definitions were moved into header files. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11203 Reviewed By: cbi42 Differential Revision: D43160255 Pulled By: pdillinger fbshipit-source-id: f3a465fd5d1a7049b73ecf31e4b8c3762f6dae6c
-
由 Andrew Kryczka 提交于
Summary: From HISTORY.md: Added a subcode of `Status::Corruption`, `Status::SubCode::kMergeOperatorFailed`, for users to identify corruption failures originating in the merge operator, as opposed to RocksDB's internally identified data corruptions. This is a followup to https://github.com/facebook/rocksdb/issues/11092, where we gave users the ability to keep running a DB despite merge operator failing. Now that the DB keeps running despite such failures, they want to be able to distinguish such failures from real corruptions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11231 Test Plan: updated unit test Reviewed By: akankshamahajan15 Differential Revision: D43396607 Pulled By: ajkr fbshipit-source-id: 17fbcc779ad724dafada8abd73efd38e1c5208b9
-
- 17 2月, 2023 2 次提交
-
-
由 akankshamahajan 提交于
Return NotSupported in scan if IOUring not supported and enable IOUring in db_stress for async_io testing (#11197) Summary: - Return NotSupported in scan if IOUring not supported if async_io is enabled - Enable IOUring in db_stress for async_io testing - Disable async_io in circleci crash testing as circleci doesn't support IOUring Pull Request resolved: https://github.com/facebook/rocksdb/pull/11197 Test Plan: CircleCI jobs Reviewed By: anand1976 Differential Revision: D43096313 Pulled By: akankshamahajan15 fbshipit-source-id: c2c53a87636950c0243038b9f5bd0d91608e4fda
-
由 Peter Dillinger 提交于
Summary: Added `do_not_compress_roles` to `CompressedSecondaryCacheOptions` to disable compression on certain kinds of block. Filter blocks are now not compressed by CompressedSecondaryCache by default. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11204 Test Plan: unit test added Reviewed By: anand1976 Differential Revision: D43147698 Pulled By: pdillinger fbshipit-source-id: db496975ae975fa18f157f93fe131a16315ac875
-
- 16 2月, 2023 1 次提交
-
-
由 Levi Tamasi 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11226 Reviewed By: akankshamahajan15 Differential Revision: D43317602 Pulled By: ltamasi fbshipit-source-id: 4b7e063848d3cfbdb9f0c0f54d68aeab8a82595c
-
- 10 2月, 2023 1 次提交
-
-
由 Peter Dillinger 提交于
Summary: The definition of the Cache class should not be needed by the vast majority of RocksDB users, so I think it is just distracting to include it in cache.h, which is primarily needed for configuring and creating caches. This change moves the class to a new header advanced_cache.h. It is just cut-and-paste except for modifying the class API comment. In general, operations on shared_ptr<Cache> should continue to work when only a forward declaration of Cache is available, as long as all the Cache instances provided are already shared_ptr. See https://stackoverflow.com/a/17650101/454544 Also, the most common way to customize a Cache is by wrapping an existing implementation, so it makes sense to provide CacheWrapper in the public API. This was a cut-and-paste job except removing the implementation of Name() so that derived classes must provide it. Intended follow-up: consolidate Release() into one function to reduce customization bugs / confusion Pull Request resolved: https://github.com/facebook/rocksdb/pull/11192 Test Plan: `make check` Reviewed By: anand1976 Differential Revision: D43055487 Pulled By: pdillinger fbshipit-source-id: 7b05492df35e0f30b581b4c24c579bc275b6d110
-
- 09 2月, 2023 1 次提交
-
-
由 anand76 提交于
Summary: Fix a bug in the calculation of the input buffer address/offset in log_reader.cc. The bug is when consecutive fragments of a compressed record are located at the same offset in the log reader buffer, the second fragment input buffer is treated as a leftover from the previous input buffer. As a result, the offset in the `ZSTD_inBuffer` is not reset. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11198 Test Plan: Add a unit test in log_test.cc that fails without the fix and passes with it. Reviewed By: ajkr, cbi42 Differential Revision: D43102692 Pulled By: anand1976 fbshipit-source-id: aa2648f4802c33991b76a3233c5a58d4cc9e77fd
-
- 08 2月, 2023 2 次提交
-
-
由 Levi Tamasi 提交于
Summary: The patch adds compaction filter support for wide-column entities by introducing a new `CompactionFilter` API called `FilterV3`. This API is called for regular key-values, merge operands, and wide-column entities as well. It is passed the existing value/operand or wide-column structure and it can update the value or columns or keep/delete/etc. the key-value as usual. For compatibility, the default implementation of `FilterV3` keeps all wide-column entities and falls back to calling `FilterV2` for plain old key-values and merge operands. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11196 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D43094147 Pulled By: ltamasi fbshipit-source-id: 75acabe9a35254f7f404ba6173ee9c2774382ebd
-
由 Hui Xiao 提交于
Summary: **Context/Summary:** As instructed by convenience.h comments, a few deprecated APIs are removed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11120 Test Plan: - make check & CI - eyeball check on test semantics. Reviewed By: pdillinger Differential Revision: D42937507 Pulled By: hx235 fbshipit-source-id: a9e4709387da01b1d0e9148c2e210f02e9746ee1
-
- 04 2月, 2023 2 次提交
-
-
由 Peter Dillinger 提交于
Summary: With https://github.com/facebook/rocksdb/issues/11150 this becomes a practical change that I think is overall good for developer efficiency. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11168 Test Plan: More efficient build of all unit tests and tools: ``` $ git clean -fdx $ du -sh . 522M . $ /usr/bin/time make -j32 LIB_MODE=static ... 14270.63user 1043.33system 11:19.85elapsed 2252%CPU (0avgtext+0avgdata 1929944maxresident)k ... $ du -sh . 62G . $ ``` Vs. ``` $ git clean -fdx $ du -sh . 522M . $ /usr/bin/time make -j32 LIB_MODE=shared ... 9479.87user 478.26system 7:20.82elapsed 2258%CPU (0avgtext+0avgdata 1929272maxresident)k ... $ du -sh . 5.4G . $ ``` So 1/3 less build time and >90% less space usage. Individual unit test edit-compile-run is not too different. Modifying an average unit test source file: ``` $ touch db/version_builder_test.cc $ /usr/bin/time make -j32 LIB_MODE=static version_builder_test ... 34.74user 3.37system 0:38.29elapsed 99%CPU (0avgtext+0avgdata 945520maxresident)k ``` Vs. ``` $ touch db/version_builder_test.cc $ /usr/bin/time make -j32 LIB_MODE=shared version_builder_test ... 116.26user 43.91system 0:28.65elapsed 559%CPU (0avgtext+0avgdata 675160maxresident)k ``` A little faster with shared. However, modifying an average DB implementation file has an extra linking step with shared lib: ``` $ touch db/db_impl/db_impl_files.cc $ /usr/bin/time make -j32 LIB_MODE=static version_builder_test ... 33.17user 5.13system 0:39.70elapsed 96%CPU (0avgtext+0avgdata 945544maxresident)k ``` Vs. ``` $ touch db/db_impl/db_impl_files.cc $ /usr/bin/time make -j32 LIB_MODE=shared version_builder_test ... 40.80user 4.66system 0:45.54elapsed 99%CPU (0avgtext+0avgdata 1056340maxresident)k ``` A little slower with shared. On the whole, should be faster and lighter weight because of the many unit test files case Reviewed By: cbi42 Differential Revision: D42894004 Pulled By: pdillinger fbshipit-source-id: 9e827e52ace79b86f849b6a24466e318b4b605a7
-
由 Peter Dillinger 提交于
Summary: This option has long been intended to be set to false by default and deprecated. It might never be practical to completely remove the feature, so that we can continue to test for backward compatibility by keeping the ability to generate DBs in the old way. Also improved API comments. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11179 Test Plan: existing tests (with one tiny update) Reviewed By: hx235 Differential Revision: D42973927 Pulled By: pdillinger fbshipit-source-id: e9bc161cb933266e094aea2dff8cc03753c39dab
-
- 03 2月, 2023 1 次提交
-
-
由 anand76 提交于
Summary: Currently, we incorrectly return a Status::Corruption to the MultiGet caller if the file system ReadAsync cannot issue a read and returns an error for some reason, such as IOStatus::NotSupported(). In this PR, we copy the ReadAsync error to the request status so it can be returned to the user. Tests: Update existing unit tests and add a new one for this scenario Pull Request resolved: https://github.com/facebook/rocksdb/pull/11171 Reviewed By: akankshamahajan15 Differential Revision: D42950057 Pulled By: anand1976 fbshipit-source-id: 85ffcb015fa6c064c311f8a28488fec78c487869
-
- 02 2月, 2023 1 次提交
-
-
由 Andrew Kryczka 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11177 Reviewed By: cbi42 Differential Revision: D42948946 Pulled By: ajkr fbshipit-source-id: 783d3d9007faaa036923a0364cdd0bfbd8e78062
-
- 01 2月, 2023 2 次提交
-
-
由 Andrew Kryczka 提交于
Summary: This PR adds logic to the `RunManualCompaction()` loop to check for cancellation before waiting on any conflicting compactions to finish. In case of cancellation, `RunManualCompaction()` no longer waits on conflicting compactions Pull Request resolved: https://github.com/facebook/rocksdb/pull/11165 Test Plan: repro test case Reviewed By: cbi42 Differential Revision: D42864058 Pulled By: ajkr fbshipit-source-id: ea4dd1a8f294abe212905495a8fbe8f07fca3f5a
-
由 Levi Tamasi 提交于
Summary: The patch fixes a feature interaction bug between BlobDB and the `GetEntity` API: without the patch, `GetEntity` would return the blob reference (wrapped into a single-column entity) instead of the actual blob value. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11162 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D42854092 Pulled By: ltamasi fbshipit-source-id: f750d0ff57def107da16f545077ddce9860ff21a
-
- 31 1月, 2023 2 次提交
-
-
由 Peter Dillinger 提交于
Summary: The previous API comments for LockWAL didn't provide much about why you might want to use it, and didn't really meet what one would infer its contract was. Also, LockWAL was not in db_stress / crash test. In this change: * Implement a counting semantics for LockWAL()+UnlockWAL(), so that they can safely be used concurrently across threads or recursively within a thread. This should make the API much less bug-prone and easier to use. * Make sure no UnlockWAL() is needed after non-OK LockWAL() (to match RocksDB conventions) * Make UnlockWAL() reliably return non-OK when there's no matching LockWAL() (for debug-ability) * Clarify API comments on LockWAL(), UnlockWAL(), FlushWAL(), and SyncWAL(). Their exact meanings are not obvious, and I don't think it's appropriate to talk about implementation mutexes in the API comments, but about what operations might block each other. * Add LockWAL()/UnlockWAL() to db_stress and crash test, mostly to check for assertion failures, but also checks that latest seqno doesn't change while WAL is locked. This is simpler to add when LockWAL() is allowed in multiple threads. * Remove unnecessary use of sync points in test DBWALTest::LockWal. There was a bug during development of above changes that caused this test to fail sporadically, with and without this sync point change. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11143 Test Plan: unit tests added / updated, added to stress/crash test Reviewed By: ajkr Differential Revision: D42848627 Pulled By: pdillinger fbshipit-source-id: 6d976c51791941a31fd8fbf28b0f82e888d9f4b4
-
由 Yu Zhang 提交于
Summary: Use the user key on sst file for blob verification for `Get` and `MultiGet` instead of the user key passed from caller. Add tests for `Get` and `MultiGet` operations when user defined timestamp feature is enabled in a BlobDB. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11105 Test Plan: make V=1 db_blob_basic_test ./db_blob_basic_test --gtest_filter="DBBlobTestWithTimestamp.*" Reviewed By: ltamasi Differential Revision: D42716487 Pulled By: jowlyzhang fbshipit-source-id: 5987ecbb7e56ddf46d2467a3649369390789506a
-
- 28 1月, 2023 2 次提交
-
-
由 sdong 提交于
Summary: We haven't been actively mantaining RocksDB LITE recently and the size must have been gone up significantly. We are removing the support. Most of changes were done through following comments: unifdef -m -UROCKSDB_LITE `git grep -l ROCKSDB_LITE | egrep '[.](cc|h)'` by Peter Dillinger. Others changes were manually applied to build scripts, CircleCI manifests, ROCKSDB_LITE is used in an expression and file db_stress_test_base.cc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11147 Test Plan: See CI Reviewed By: pdillinger Differential Revision: D42796341 fbshipit-source-id: 4920e15fc2060c2cd2221330a6d0e5e65d4b7fe2
-
由 Yu Zhang 提交于
Summary: Remove the util functions in options_util.h that have previously been marked deprecated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11126 Test Plan: `make check` Reviewed By: ltamasi Differential Revision: D42757496 Pulled By: jowlyzhang fbshipit-source-id: 2a138a3c207d0e0e0bbb4d99548cf2cadb44bcfb
-
- 27 1月, 2023 3 次提交
-
-
由 Changyu Bi 提交于
Summary: user should use FileSystem::CreateFromString() instead. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11122 Reviewed By: ajkr Differential Revision: D42727580 Pulled By: cbi42 fbshipit-source-id: c68b17bb82ba9dee46ba23b677d87ecf0a1e06c8
-
由 Karim TAAM 提交于
Summary: ## Description In this issue https://github.com/facebook/rocksdb/issues/11002 we found that when we use rocksdb with the `verify checksum` read_option to false the verification is done anyway By analyzing the code along the stacktrace I saw that at the level of https://github.com/facebook/rocksdb/compare/main...matkt:feature/use-verify-checksum-in-block-based-table-reader?expand=1#diff-57ed8c49db2bdd4db7618646a177397674bbf25beacacecb104070071d30129f we are not keeping all the options and we forget the `verify_checksum` the comment in this class suggests that it should be managed https://github.com/facebook/rocksdb/compare/main...matkt:feature/use-verify-checksum-in-block-based-table-reader?expand=1#diff-57ed8c49db2bdd4db7618646a177397674bbf25beacacecb104070071d30129fL581 <img width="1724" alt="204511641-86ab4b9b-45e5-4a2b-a13d-81fa26435d38" src="https://user-images.githubusercontent.com/26581503/213152802-c46bc1c7-a3a2-4a6f-9bb1-bf92ee93af7a.png"> this PR just adds the line to manage the `verify checksum` ## Tests - Running unit tests - Test without setting `verify checksum` and verifying that we are calling the checksum code - Test by setting `verify checksum` to true and verifying that we are calling the checksum code - Test by setting `verify checksum` to false and verifying that we are **not** calling the checksum code Pull Request resolved: https://github.com/facebook/rocksdb/pull/11099 Reviewed By: cbi42 Differential Revision: D42679881 Pulled By: ajkr fbshipit-source-id: c7dd10768282fd0699f7e1bf397ceb7adbea4ab6
-
由 Levi Tamasi 提交于
Summary: Some histograms were incorrectly categorized as tickers. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11140 Reviewed By: anand1976 Differential Revision: D42780030 Pulled By: ltamasi fbshipit-source-id: 5aca8ec5baad8f73676aaa9d6cdbbd2a619c8a89
-
- 26 1月, 2023 2 次提交
-
-
由 Levi Tamasi 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11131 Test Plan: `make check` Reviewed By: pdillinger Differential Revision: D42753997 Pulled By: ltamasi fbshipit-source-id: ce8b84c1e55374257e93ed74fd255c9b759723ce
-
由 Peter Dillinger 提交于
Summary: Can use Env::CreateFromString() instead Pull Request resolved: https://github.com/facebook/rocksdb/pull/11121 Test Plan: unit tests updated Reviewed By: cbi42 Differential Revision: D42723813 Pulled By: pdillinger fbshipit-source-id: 5d4b5b10225dfdaf662f5f8049ee965a05d3edc9
-
- 25 1月, 2023 3 次提交
-
-
由 Levi Tamasi 提交于
Summary: These tickers/histograms have been obsolete (and not populated) for a long time. The patch removes them from the API completely. Note that this means that the numeric values of the remaining tickers change in the C++ code as they get shifted up. This should be OK: the values of some existing tickers have changed many times over the years as items have been added in the middle. (In contrast, the convention in the Java bindings is to keep the ids, which are not guaranteed to be the same as the ids on the C++ side, the same across releases.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/11123 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D42727793 Pulled By: ltamasi fbshipit-source-id: e058a155a20b05b45f53e67ee380aece1b43b6c5
-
由 sdong 提交于
Summary: Compressed block cache is replaced by compressed secondary cache. Remove the feature. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11117 Test Plan: See CI passes Reviewed By: pdillinger Differential Revision: D42700164 fbshipit-source-id: 6cbb24e460da29311150865f60ecb98637f9f67d
-
由 Hui Xiao 提交于
Fix data race on `ColumnFamilyData::flush_reason` by letting FlushRequest/Job owns flush_reason instead of CFD (#11111) Summary: **Context:** Concurrent flushes on the same CF can set on `ColumnFamilyData::flush_reason` before each other flush finishes. An symptom is one CF has different flush_reason with others though all of them are in an atomic flush `db_stress: db/db_impl/db_impl_compaction_flush.cc:423: rocksdb::Status rocksdb::DBImpl::AtomicFlushMemTablesToOutputFiles(const rocksdb::autovector<rocksdb::DBImpl::BGFlushArg>&, bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::Env::Priority): Assertion cfd->GetFlushReason() == cfds[0]->GetFlushReason() failed. ` **Summary:** Suggested by ltamasi, we now refactor and let FlushRequest/Job to own flush_reason as there is no good way to define `ColumnFamilyData::flush_reason` in face of concurrent flushes on the same CF (which wasn't the case a long time ago when `ColumnFamilyData::flush_reason ` first introduced`) **Tets:** - new unit test - make check - aggressive crash test rehearsal Pull Request resolved: https://github.com/facebook/rocksdb/pull/11111 Reviewed By: ajkr Differential Revision: D42644600 Pulled By: hx235 fbshipit-source-id: 8589c8184869d3415e5b780c887f877818a5ebaf
-
- 24 1月, 2023 1 次提交
-
-
由 Hui Xiao 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/11114 Reviewed By: ajkr Differential Revision: D42685234 Pulled By: hx235 fbshipit-source-id: 79908a66ab9052a2552f080049065462ebf2f94c
-
- 21 1月, 2023 1 次提交
-
-
由 Andrew Kryczka 提交于
Summary: Prior to this PR, `FullMergeV2()` can only return `false` to indicate failure, which causes any operation invoking it to fail. During a compaction, such a failure causes the compaction to fail and causes the DB to irreversibly enter read-only mode. Some users asked for a way to allow the merge operator to fail without such widespread damage. To limit the blast radius of merge operator failures, this PR introduces the `MergeOperationOutput::op_failure_scope` API. When unpopulated (`kDefault`) or set to `kTryMerge`, the merge operator failure handling is the same as before. When set to `kMustMerge`, merge operator failure still causes failure to operations that must merge (`Get()`, iterator, `MultiGet()`, etc.). However, under `kMustMerge`, flushes/compactions can survive merge operator failures by outputting the unmerged input operands. Pull Request resolved: https://github.com/facebook/rocksdb/pull/11092 Reviewed By: siying Differential Revision: D42525673 Pulled By: ajkr fbshipit-source-id: 951dc3bf190f86347dccf3381be967565cda52ee
-