Summary:
Avoid locking the DB mutex in order to reference SuperVersions. Instead, we get the thread local cached SuperVersion for each column family in the list. It depends on finding a sequence number that overlaps with all the open memtables. We start with the latest published sequence number, and if any of the memtables is sealed before we can get all the SuperVersions, the process is repeated. After a few times, give up and lock the DB mutex.

Tests:
1. Unit tests
2. make check
3. db_bench -

TEST_TMPDIR=/dev/shm ./db_bench -use_existing_db=true -benchmarks=readrandom -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=5000000 -reads=1000000 -threads=32 -compression_type=none -cache_size=1048576000 -batch_size=1 -bloom_bits=1
readrandom   :       0.167 micros/op 5983920 ops/sec;  426.2 MB/s (1000000 of 1000000 found)

Multireadrandom with batch size 1:
multireadrandom :       0.176 micros/op 5684033 ops/sec; (1000000 of 1000000 found)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4754

Differential Revision: D13363550

Pulled By: anand1976

fbshipit-source-id: 6243e8de7dbd9c8bb490a8eca385da0c855b1dd4

Summary:
Introduce the first CPU timing counter, perf_context.get_cpu_nanos. This opens a door to more CPU counters in the future.
Only Posix Env has it implemented using clock_gettime() with CLOCK_THREAD_CPUTIME_ID. How accurate the counter is depends on the platform.
Make PerfStepTimer to take an Env as an argument, and sometimes pass it in. The direct reason is to make the unit tests to use SpecialEnv where we can ingest logic there. But in long term, this is a good change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4741

Differential Revision: D13287798

Pulled By: siying

fbshipit-source-id: 090361049d9d5095d1d1a369fe1338d2e2e1c73f

Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638

Differential Revision: D12934992

Pulled By: sagar0

fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8

Summary:
The new case is directIO = true, write_global_seqno = false in which we no longer write global_seqno to the external SST file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4614

Differential Revision: D12885001

Pulled By: riversand963

fbshipit-source-id: 7541bdc608b3a0c93d3c3c435da1b162b36673d4

Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/4607

Reviewed By: siying

Differential Revision: D12836696

Pulled By: jsjhoubo

fbshipit-source-id: 7122ccb712d0b0f1cd998aa4477e0da1401bd870

Summary:
Adds a DB option `atomic_flush` to control whether to enable this feature. This PR is a subset of [PR 3752](https://github.com/facebook/rocksdb/pull/3752).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4023

Differential Revision: D8518381

Pulled By: riversand963

fbshipit-source-id: 1e3bb33e99bb102876a31b378d93b0138ff6634f

Summary:
When `MockTimeEnv` is used in test to mock time methods, we cannot use `CondVar::TimedWait` because it is using real time, not the mocked time for wait timeout. On Mac the method can return immediately without awaking other waiting threads, if the real time is larger than `wait_until` (which is a mocked time). When that happen, the `wait()` method will fall into an infinite loop.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4560

Differential Revision: D10472851

Pulled By: yiwu-arbug

fbshipit-source-id: 898902546ace7db7ac509337dd8677a527209d19

Summary:
Currently statistics are supposed to be dumped to info log at intervals of `options.stats_dump_period_sec`. However the implementation choice was to bind it with compaction thread, meaning if the database has been serving very light traffic, the stats may not get dumped at all.
We decided to separate stats dumping into a new timed thread using `TimerQueue`, which is already used in blob_db. This will allow us schedule new timed tasks with more deterministic behavior.

Tested with db_bench using `--stats_dump_period_sec=20` in command line:
> LOG:2018/09/17-14:07:45.575025 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:05.643286 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:25.691325 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:45.740989 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------

LOG content:
> 2018/09/17-14:07:45.575025 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
2018/09/17-14:07:45.575080 7fe99fbfe700 [WARN] [db/db_impl.cc:606]
** DB Stats **
Uptime(secs): 20.0 total, 20.0 interval
Cumulative writes: 4447K writes, 4447K keys, 4447K commit groups, 1.0 writes per commit group, ingest: 5.57 GB, 285.01 MB/s
Cumulative WAL: 4447K writes, 0 syncs, 4447638.00 writes per sync, written: 5.57 GB, 285.01 MB/s
Cumulative stall: 00:00:0.012 H:M:S, 0.1 percent
Interval writes: 4447K writes, 4447K keys, 4447K commit groups, 1.0 writes per commit group, ingest: 5700.71 MB, 285.01 MB/s
Interval WAL: 4447K writes, 0 syncs, 4447638.00 writes per sync, written: 5.57 MB, 285.01 MB/s
Interval stall: 00:00:0.012 H:M:S, 0.1 percent
** Compaction Stats [default] **
Level    Files   Size     Score Read(GB)  Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4382

Differential Revision: D9933051

Pulled By: miasantreble

fbshipit-source-id: 6d12bb1e4977674eea4bf2d2ac6d486b814bb2fa

Summary:
Improve log handling when avoid_flush_during_recovery=true.
1. restore total_log_size_ after recovery, by summing up existing log sizes. Fixes #4253.
2. truncate the last existing log, since this log can contain preallocated space and it will be a waste to keep the space. It avoids a crash loop of user application cause a lot of log with non-trivial size being created and ultimately take up all disk space.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4405

Differential Revision: D9953933

Pulled By: yiwu-arbug

fbshipit-source-id: 967780fee8acec7f358b6eb65190fb4684f82e56

Summary:
Value delta encoding in format_version 4 requires the differences between the size of two consecutive handles to be sent to BlockBuilder::Add. This applies not only to indexes on blocks but also the indexes on indexes and filters in partitioned indexes and filters respectively. The patch fixes a bug where the partitioned filters would encode the entire size of the handle rather than the difference of the size with the last size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4381

Differential Revision: D9879505

Pulled By: maysamyabandeh

fbshipit-source-id: 27a22e49b482b927fbd5629dc310c46d63d4b6d1

Summary: Initialize uninitialized std::atomic variables

Reviewed By: yfeldblum

Differential Revision: D9758050

fbshipit-source-id: 865d89eddafc81f3cab6f11e2ebb669f7ff70d04

Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the  block cache more efficiently. The feature is enabled with using format_version 4.

The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585   rocksdb read-only range=100
Format 3:
19569   rocksdb read-only range=100
Format 4:
19352   rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983

Differential Revision: D8361343

Pulled By: maysamyabandeh

fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651

Summary:
Fixes #3391.

This change adds a `DeleteRange` method to `SstFileWriter` and adds
support for ingesting SSTs with range deletion tombstones. This is
important for applications that need to atomically ingest SSTs while
clearing out any existing keys in a given key range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3778

Differential Revision: D8821836

Pulled By: anand1976

fbshipit-source-id: ca7786c1947ff129afa703dab011d524c7883844

Summary:
1. Move kUniversalSubcompactions up before kEnd in db_test_util.h, so
tests that cycle through all the option_configs include this
2. Skip kUniversalSubcompactions wherever kUniversalCompaction and
kUniversalCompactionMultilevel are skipped

Related to #3935
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4125

Differential Revision: D8828637

Pulled By: anand1976

fbshipit-source-id: 650dee15fd27d85281cf9bb4ca8ab460e04cac6f

Summary:
format_version=3 changes the format of SST index. This is however not being tested currently since tests only work with the default format_version which is currently 2. The patch extends the most related tests to also test for format_version=3.
Closes https://github.com/facebook/rocksdb/pull/3942

Differential Revision: D8238413

Pulled By: maysamyabandeh

fbshipit-source-id: 915725f55753dd8e9188e802bf471c23645ad035

Summary:
DBTestBase::OptionConfig includes the scenarios that unit tests could iterate over them by calling ChangeOptions(). Some of the options have  been mistakenly put after kEnd which makes them essentially invisible to ChangeOptions() caller. This patch fixes it except for kUniversalSubcompactions which is left as TODO since it would break some unit tests.
Closes https://github.com/facebook/rocksdb/pull/3935

Differential Revision: D8230748

Pulled By: maysamyabandeh

fbshipit-source-id: edddb8fffcd161af1809fef24798ce118f8593db

Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.

Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)

This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765

Differential Revision: D7747618

Pulled By: siying

fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729

Summary:
This reverts commit 73f21a7b.

It breaks compatibility. When created a DB using a build with this new change, opening the DB and reading the data will fail with this error:

"Corruption: Can't access /000000.sst: IO error: while stat a file for size: /tmp/xxxx/000000.sst: No such file or directory"

This is because the dummy AddFile4 entry generated by the new code will be treated as a real entry by an older build. The older build will think there is a real file with number 0, but there isn't such a file.
Closes https://github.com/facebook/rocksdb/pull/3762

Differential Revision: D7730035

Pulled By: siying

fbshipit-source-id: f2051859eff20ef1837575ecb1e1bb96b3751e77

Summary:
fix a new TSAN failure
https://gist.github.com/miasantreble/7599c33f4e17da1024c67d4540dbe397
Closes https://github.com/facebook/rocksdb/pull/3694

Differential Revision: D7565310

Pulled By: miasantreble

fbshipit-source-id: f672c96e925797b34dec6e20b59527e8eebaa825

Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.

Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions.  This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102

Differential Revision: D6951697

Pulled By: ajkr

fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d

Summary:
This patch record the deleted WAL numbers in the manifest to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Closes https://github.com/facebook/rocksdb/pull/3488

Differential Revision: D6967893

Pulled By: maysamyabandeh

fbshipit-source-id: 13119feb155a08ab6d4909f437c7a750480dc8a1

Summary:
Submitting on behalf of another employee.
Closes https://github.com/facebook/rocksdb/pull/3557

Differential Revision: D7146025

Pulled By: ajkr

fbshipit-source-id: 495ca5db5beec3789e671e26f78170957704e77e

Reviewed By: igorsugak

fbshipit-source-id: 4a93675cc1931089ddd574cacdb15d228b1e5f37

Reviewed By: everiq, igorsugak

Differential Revision: D7046710

fbshipit-source-id: 8e10b1f1e2aecebbfb229c742e214db887e5a461

Summary:
The MemTableRep API was broken by this commit: 813719e9
This patch reverts the changes and instead adds InsertKey (and etc.) overloads to extend the MemTableRep API without breaking the existing classes that inherit from it.
Closes https://github.com/facebook/rocksdb/pull/3513

Differential Revision: D7004134

Pulled By: maysamyabandeh

fbshipit-source-id: e568d91fe1e17dd76c0c1f6c7dd51a18633b1c4f

Summary:
Currently DB does not accept duplicate keys (keys with the same user key and the same sequence number). If Memtable returns false when receiving such keys, we can benefit from this signal to properly increase the sequence number in the rare cases when we have a duplicate key in the write batch written to DB under WritePrepared transactions.
Closes https://github.com/facebook/rocksdb/pull/3418

Differential Revision: D6822412

Pulled By: maysamyabandeh

fbshipit-source-id: adea3ce5073131cd38ed52b16bea0673b1a19e77

Summary:
* Fix DBTest.CompactRangeWithEmptyBottomLevel lite build failure
* Fix DBTest.AutomaticConflictsWithManualCompaction failure introduce by #3366
* Fix BlockBasedTableTest::IndexUncompressed should be disabled if snappy is disabled
* Fix ASAN failure with DBBasicTest::DBClose test
Closes https://github.com/facebook/rocksdb/pull/3373

Differential Revision: D6732313

Pulled By: yiwu-arbug

fbshipit-source-id: 1eb9b9d9a8d795f56188fa9770db9353f6fdedc5

Summary:
this should fix the failing tsan_check
Closes https://github.com/facebook/rocksdb/pull/3192

Differential Revision: D6390004

Pulled By: miasantreble

fbshipit-source-id: 6cadfc6f68febb1a77b0abcdb5416570dad926a5

Summary: Closes https://github.com/facebook/rocksdb/pull/3004

Differential Revision: D6056141

Pulled By: miasantreble

fbshipit-source-id: 56df1630f464fd56b07d25d38161f699e0528b7f

Summary:
The motivation for this PR is to add to RocksDB support for differential (incremental) snapshots, as snapshot of the DB changes between two points in time (one can think of it as diff between to sequence numbers, or the diff D which can be thought of as an SST file or just set of KVs that can be applied to sequence number S1 to get the database to the state at sequence number S2).

This feature would be useful for various distributed storages layers built on top of RocksDB, as it should help reduce resources (time and network bandwidth) needed to recover and rebuilt DB instances as replicas in the context of distributed storages.

From the API standpoint that would like client app requesting iterator between (start seqnum) and current DB state, and reading the "diff".

This is a very draft PR for initial review in the discussion on the approach, i'm going to rework some parts and keep updating the PR.

For now, what's done here according to initial discussions:

Preserving deletes:
 - We want to be able to optionally preserve recent deletes for some defined period of time, so that if a delete came in recently and might need to be included in the next incremental snapshot it would't get dropped by a compaction. This is done by adding new param to Options (preserve deletes flag) and new variable to DB Impl where we keep track of the sequence number after which we don't want to drop tombstones, even if they are otherwise eligible for deletion.
 - I also added a new API call for clients to be able to advance this cutoff seqnum after which we drop deletes; i assume it's more flexible to let clients control this, since otherwise we'd need to keep some kind of timestamp < -- > seqnum mapping inside the DB, which sounds messy and painful to support. Clients could make use of it by periodically calling GetLatestSequenceNumber(), noting the timestamp, doing some calculation and figuring out by how much we need to advance the cutoff seqnum.
 - Compaction codepath in compaction_iterator.cc has been modified to avoid dropping tombstones with seqnum > cutoff seqnum.

Iterator changes:
 - couple params added to ReadOptions, to optionally allow client to request internal keys instead of user keys (so that client can get the latest value of a key, be it delete marker or a put), as well as min timestamp and min seqnum.

TableCache changes:
 - I modified table_cache code to be able to quickly exclude SST files from iterators heep if creation_time on the file is less then iter_start_ts as passed in ReadOptions. That would help a lot in some DB settings (like reading very recent data only or using FIFO compactions), but not so much for universal compaction with more or less long iterator time span.

What's left:

 - Still looking at how to best plug that inside DBIter codepath. So far it seems that FindNextUserKeyInternal only parses values as UserKeys, and iter->key() call generally returns user key. Can we add new API to DBIter as internal_key(), and modify this internal method to optionally set saved_key_ to point to the full internal key? I don't need to store actual seqnum there, but I do need to store type.
Closes https://github.com/facebook/rocksdb/pull/2999

Differential Revision: D6175602

Pulled By: mikhail-antonov

fbshipit-source-id: c779a6696ee2d574d86c69cec866a3ae095aa900

Summary:
With FIFO compaction we would like to get the oldest data time for monitoring. The problem is we don't have timestamp for each key in the DB. As an approximation, we expose the earliest of sst file "creation_time" property.

My plan is to override the property with a more accurate value with blob db, where we actually have timestamp.
Closes https://github.com/facebook/rocksdb/pull/2842

Differential Revision: D5770600

Pulled By: yiwu-arbug

fbshipit-source-id: 03833c8f10bbfbee62f8ea5c0d03c0cafb5d853a

Summary:
This reverts the previous commit 1d7048c5, which broke the build.

Did a `git revert 1d7048c5`.
Closes https://github.com/facebook/rocksdb/pull/2627

Differential Revision: D5476473

Pulled By: sagar0

fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06

Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.

Reviewed By: igorsugak

Differential Revision: D5454343

fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2

Summary:
This patch enables using PinnableSlice for RowCache, changes include
not releasing the cache handle immediately after lookup in TableCache::Get, instead pass a Cleanble function which does Cache::RleaseHandle.
Closes https://github.com/facebook/rocksdb/pull/2492

Differential Revision: D5316216

Pulled By: maysamyabandeh

fbshipit-source-id: d2a684bd7e4ba73772f762e58a82b5f4fbd5d362

Summary: Closes https://github.com/facebook/rocksdb/pull/2589

Differential Revision: D5431502

Pulled By: siying

fbshipit-source-id: 8ebf8c87883daa9daa54b2303d11ce01ab1f6f75

Summary:
This PR adds support for encrypting data stored by RocksDB when written to disk.

It adds an `EncryptedEnv` override of the `Env` class with matching overrides for sequential&random access files.
The encryption itself is done through a configurable `EncryptionProvider`. This class creates is asked to create `BlockAccessCipherStream` for a file. This is where the actual encryption/decryption is being done.
Currently there is a Counter mode implementation of `BlockAccessCipherStream` with a `ROT13` block cipher (NOTE the `ROT13` is for demo purposes only!!).

The Counter operation mode uses an initial counter & random initialization vector (IV).
Both are created randomly for each file and stored in a 4K (default size) block that is prefixed to that file. The `EncryptedEnv` implementation is such that clients of the `Env` class do not see this prefix (nor data, nor in filesize).
The largest part of the prefix block is also encrypted, and there is room left for implementation specific settings/values/keys in there.

To test the encryption, the `DBTestBase` class has been extended to consider a new environment variable called `ENCRYPTED_ENV`. If set, the test will setup a encrypted instance of the `Env` class to use for all tests.
Typically you would run it like this:

```
ENCRYPTED_ENV=1 make check_some
```

There is also an added test that checks that some data inserted into the database is or is not "visible" on disk. With `ENCRYPTED_ENV` active it must not find plain text strings, with `ENCRYPTED_ENV` unset, it must find the plain text strings.
Closes https://github.com/facebook/rocksdb/pull/2424

Differential Revision: D5322178

Pulled By: sdwilsh

fbshipit-source-id: 253b0a9c2c498cc98f580df7f2623cbf7678a27f

Summary: Closes https://github.com/facebook/rocksdb/pull/2454

Differential Revision: D5255320

Pulled By: siying

fbshipit-source-id: 0080830fa8eb5da6de25e17ba68aee91018c7913

Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)

The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.

Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.

Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345

Differential Revision: D5210732

Pulled By: maysamyabandeh

fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4

Summary:
Improve write buffer manager in several ways:
1. Size is tracked when arena block is allocated, rather than every allocation, so that it can better track actual memory usage and the tracking overhead is slightly lower.
2. We start to trigger memtable flush when 7/8 of the memory cap hits, instead of 100%, and make 100% much harder to hit.
3. Allow a cache object to be passed into buffer manager and the size allocated by memtable can be costed there. This can help users have one single memory cap across block cache and memtable.
Closes https://github.com/facebook/rocksdb/pull/2350

Differential Revision: D5110648

Pulled By: siying

fbshipit-source-id: b4238113094bf22574001e446b5d88523ba00017

Summary:
Some users want to monitor column family activity in their custom memtable implementations. Previously there was no way to figure out with which column family a memtable is associated. This diff:

- adds an overload to MemTableRepFactory::CreateMemTableRep() that provides the CF ID. For compatibility, its default implementation calls the old overload.
- updates MemTable to create MemTableRep's using the new overload.
Closes https://github.com/facebook/rocksdb/pull/2346

Differential Revision: D5108061

Pulled By: ajkr

fbshipit-source-id: 3a1921214a348dd8ea0f54e1cab3b71c3d46d616