- 28 2月, 2022 1 次提交
-
-
由 Andrew Kryczka 提交于
Summary: We found a case of cacheline bouncing due to writers locking/unlocking `mutex_` and readers accessing `block_cache_tracer_`. We discovered it only after the issue was fixed by https://github.com/facebook/rocksdb/issues/9462 shifting the `DBImpl` members such that `mutex_` and `block_cache_tracer_` were naturally placed in separate cachelines in our regression testing setup. This PR forces the cacheline alignment of `mutex_` so we don't accidentally reintroduce the problem. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9637 Reviewed By: riversand963 Differential Revision: D34502233 Pulled By: ajkr fbshipit-source-id: 46aa313b7fe83e80c3de254e332b6fb242434c07
-
- 26 2月, 2022 2 次提交
-
-
由 Changneng Chen 提交于
Summary: Add the configuration options and help messages of BlobDB to `ldb` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9630 Test Plan: `python ./tools/ldb_test.py` Reviewed By: ltamasi Differential Revision: D34443176 Pulled By: changneng fbshipit-source-id: 5b3f185cdfc2561e06dd37215c7edfbca07dbe80
-
由 Hui Xiao 提交于
Summary: **Context:** As part of https://github.com/facebook/rocksdb/pull/6949, file deletion is disabled for faulty database on the IOError of MANIFEST write/sync and [re-enabled again during `DBImpl::Resume()` if all recovery is completed](https://github.com/facebook/rocksdb/commit/e66199d848cd484b816d07359f1dc0f0b99e5351#diff-d9341fbe2a5d4089b93b22c5ed7f666bc311b378c26d0786f4b50c290e460187R396). Before re-enabling file deletion, it `assert(versions_->io_status().ok());`, which IMO assumes `versions_` is **the** `version_` in the recovery process. However, this is not necessarily true due to `s = error_handler_.ClearBGError();` happening before that assertion can unblock some foreground thread by [`EventHelpers::NotifyOnErrorRecoveryEnd()`](https://github.com/facebook/rocksdb/blob/3122cb435875d720fc3d23a48eb7c0fa89d869aa/db/error_handler.cc#L552-L553) as part of the `ClearBGError()`. That foreground thread can do whatever it wants including closing/reopening the db and clean up that same `versions_`. As a consequence, `assert(versions_->io_status().ok());`, will access `io_status()` of a nullptr and test like `DBErrorHandlingFSTest.MultiCFWALWriteError` becomes flaky. The unblocked foreground thread (in this case, the testing thread) proceeds to [reopen the db](https://github.com/facebook/rocksdb/blob/6.29.fb/db/error_handler_fs_test.cc?fbclid=IwAR1kQOxSbTUmaHQPAGz5jdMHXtDsDFKiFl8rifX-vIz4B23Y0S9jBkssSCg#L1494), where [`versions_` gets reset to nullptr](https://github.com/facebook/rocksdb/blob/6.29.fb/db/db_impl/db_impl.cc?fbclid=IwAR2uRhwBiPKgmE9q_6CM2mzbfwjoRgsGpXOrHruSJUDcAKc9rYZtVSvKdOY#L678) as part of the old db clean-up. If this happens right before `assert(versions_->io_status().ok()); ` gets excuted in the background thread, then we can see error like ``` db/db_impl/db_impl.cc:420:5: runtime error: member call on null pointer of type 'rocksdb::VersionSet' assert(versions_->io_status().ok()); ``` **Summary:** - I proposed to call `s = error_handler_.ClearBGError();` after we know it's fine to wake up foreground, which I think is right before we LOG `ROCKS_LOG_INFO(immutable_db_options_.info_log, "Successfully resumed DB");` - As the context, the orignal https://github.com/facebook/rocksdb/pull/3997 introducing `DBImpl::Resume()` calls `s = error_handler_.ClearBGError();` very close to calling `ROCKS_LOG_INFO(immutable_db_options_.info_log, "Successfully resumed DB");` while the later https://github.com/facebook/rocksdb/pull/6949 distances these two calls a bit. - And it seems fine to me that `s = error_handler_.ClearBGError();` happens after `EnableFileDeletions(/*force=*/true);` at least syntax-wise since these two functions are orthogonal. And it also seems okay to me that we re-enable file deletion before `s = error_handler_.ClearBGError();`, which basically is resetting some state variables. - In addition, to preserve the previous behavior of https://github.com/facebook/rocksdb/pull/6949 where status of re-enabling file deletion is not taken account into the general status of resuming the db, I separated `enable_file_deletion_s` from the general `s` - In addition, to make `ROCKS_LOG_INFO(immutable_db_options_.info_log, "Successfully resumed DB");` more clear, I separated it into its own if-block. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9496 Test Plan: - Manually reproduce the assertion failure in`DBErrorHandlingFSTest.MultiCFWALWriteError` by injecting sleep like below so that it's more likely for `assert(versions_->io_status().ok());` to execute after [reopening the db](https://github.com/facebook/rocksdb/blob/6.29.fb/db/error_handler_fs_test.cc?fbclid=IwAR1kQOxSbTUmaHQPAGz5jdMHXtDsDFKiFl8rifX-vIz4B23Y0S9jBkssSCg#L1494) in the foreground (i.e, testing) thread ``` sleep(1); assert(versions_->io_status().ok()); ``` `python3 gtest-parallel/gtest_parallel.py -r 100 -w 100 rocksdb/error_handler_fs_test --gtest_filter=DBErrorHandlingFSTest.MultiCFWALWriteError` ``` [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from DBErrorHandlingFSTest [ RUN ] DBErrorHandlingFSTest.MultiCFWALWriteError Received signal 11 (Segmentation fault) #0 rocksdb/error_handler_fs_test() [0x5818a4] rocksdb::DBImpl::ResumeImpl(rocksdb::DBRecoverContext) /data/users/huixiao/rocksdb/db/db_impl/db_impl.cc:421 https://github.com/facebook/rocksdb/issues/1 rocksdb/error_handler_fs_test() [0x6379ff] rocksdb::ErrorHandler::RecoverFromBGError(bool) /data/users/huixiao/rocksdb/db/error_handler.cc:600 https://github.com/facebook/rocksdb/issues/2 rocksdb/error_handler_fs_test() [0x7c5362] rocksdb::SstFileManagerImpl::ClearError() /data/users/huixiao/rocksdb/file/sst_file_manager_impl.cc:310 https://github.com/facebook/rocksdb/issues/3 rocksdb/error_handler_fs_test() ``` - The assertion failure does not happen with PR `python3 gtest-parallel/gtest_parallel.py -r 100 -w 100 rocksdb/error_handler_fs_test --gtest_filter=DBErrorHandlingFSTest.MultiCFWALWriteError` `[100/100] DBErrorHandlingFSTest.MultiCFWALWriteError (43785 ms) ` Reviewed By: riversand963, anand1976 Differential Revision: D33990099 Pulled By: hx235 fbshipit-source-id: 2e0259a471fa8892ff177da91b3e1c0792dd7bab
-
- 24 2月, 2022 2 次提交
-
-
由 Siddhartha Roychowdhury 提交于
Summary: Implement a streaming compression API (compress/uncompress) to use for WAL compression. The log_writer would use the compress class/API to compress a record before writing it out in chunks. The log_reader would use the uncompress class/API to uncompress the chunks and combine into a single record. Added unit test to verify the API for different sizes/compression types. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9619 Test Plan: make -j24 check Reviewed By: anand1976 Differential Revision: D34437346 Pulled By: sidroyc fbshipit-source-id: b180569ad2ddcf3106380f8758b556cc0ad18382
-
由 Bo Wang 提交于
Summary: **Summary:** RocksDB uses a block cache to reduce IO and make queries more efficient. The block cache is based on the LRU algorithm (LRUCache) and keeps objects containing uncompressed data, such as Block, ParsedFullFilterBlock etc. It allows the user to configure a second level cache (rocksdb::SecondaryCache) to extend the primary block cache by holding items evicted from it. Some of the major RocksDB users, like MyRocks, use direct IO and would like to use a primary block cache for uncompressed data and a secondary cache for compressed data. The latter allows us to mitigate the loss of the Linux page cache due to direct IO. This PR includes a concrete implementation of rocksdb::SecondaryCache that integrates with compression libraries such as LZ4 and implements an LRU cache to hold compressed blocks. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9518 Test Plan: In this PR, the lru_secondary_cache_test.cc includes the following tests: 1. The unit tests for the secondary cache with either compression or no compression, such as basic tests, fails tests. 2. The integration tests with both primary cache and this secondary cache . **Follow Up:** 1. Statistics (e.g. compression ratio) will be added in another PR. 2. Once this implementation is ready, I will do some shadow testing and benchmarking with UDB to measure the impact. Reviewed By: anand1976 Differential Revision: D34430930 Pulled By: gitbw95 fbshipit-source-id: 218d78b672a2f914856d8a90ff32f2f5b5043ded
-
- 23 2月, 2022 5 次提交
-
-
由 Yanqin Jin 提交于
Summary: This PR supports inserting keys to a `WriteBatchWithIndex` for column families that enable user-defined timestamps and reading the keys back. **The index does not have timestamps.** Writing a key to WBWI is unchanged, because the underlying WriteBatch already supports it. When reading the keys back, we need to make sure to distinguish between keys with and without timestamps before comparison. When user calls `GetFromBatchAndDB()`, no timestamp is needed to query the batch, but a timestamp has to be provided to query the db. The assumption is that data in the batch must be newer than data from the db. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9603 Test Plan: make check Reviewed By: ltamasi Differential Revision: D34354849 Pulled By: riversand963 fbshipit-source-id: d25d1f84e2240ce543e521fa30595082fb8db9a0
-
由 Andrew Kryczka 提交于
Summary: We often see flaky tests due to `DB::Flush()` or `DBImpl::TEST_WaitForFlushMemTable()` not waiting until event listeners complete. For example, https://github.com/facebook/rocksdb/issues/9084, https://github.com/facebook/rocksdb/issues/9400, https://github.com/facebook/rocksdb/issues/9528, plus two new ones this week: "EventListenerTest.OnSingleDBFlushTest" and "DBFlushTest.FireOnFlushCompletedAfterCommittedResult". I ran a `make check` with the below race condition-coercing patch and fixed issues it found besides old BlobDB. ``` diff --git a/db/db_impl/db_impl_compaction_flush.cc b/db/db_impl/db_impl_compaction_flush.cc index 0e1864788..aaba68c4a 100644 --- a/db/db_impl/db_impl_compaction_flush.cc +++ b/db/db_impl/db_impl_compaction_flush.cc @@ -861,6 +861,8 @@ void DBImpl::NotifyOnFlushCompleted( mutable_cf_options.level0_stop_writes_trigger); // release lock while notifying events mutex_.Unlock(); + bg_cv_.SignalAll(); + sleep(1); { for (auto& info : *flush_jobs_info) { info->triggered_writes_slowdown = triggered_writes_slowdown; ``` The reason I did not fix old BlobDB issues is because it appears to have a fundamental (non-test) issue. In particular, it uses an EventListener to keep track of the files. OnFlushCompleted() could be delayed until even after a compaction involving that flushed file completes, causing the compaction to unexpectedly delete an untracked file. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9617 Test Plan: `make check` including the race condition coercing patch Reviewed By: hx235 Differential Revision: D34384022 Pulled By: ajkr fbshipit-source-id: 2652ded39b415277c5d6a628414345223930514e
-
由 Andrew Kryczka 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9616 Reviewed By: hx235 Differential Revision: D34383489 Pulled By: ajkr fbshipit-source-id: e4299000ef38073ec57e6ab5836150fdf8ce43d4
-
由 anand76 提交于
Summary: Combine the data members retryable_, data_loss_ and scope_ of IOStatus with Status, as protected members. IOStatus is now defined as a derived class of Status with no new data, but additional methods. This will allow us to eventually track the result of FileSystem calls in RocksDB with one variable instead of two. Benchmark commands and results are below. The performance after changes seems slightly better. ```./db_bench -db=/data/mysql/rocksdb/prefix_scan -benchmarks="fillseq" -key_size=32 -value_size=512 -num=5000000 -use_direct_io_for_flush_and_compaction=true -target_file_size_base=16777216``` ```./db_bench -use_existing_db=true --db=/data/mysql/rocksdb/prefix_scan -benchmarks="readseq,seekrandom,readseq" -key_size=32 -value_size=512 -num=5000000 -seek_nexts=10000 -use_direct_reads=true -duration=60 -ops_between_duration_checks=1 -readonly=true -adaptive_readahead=false -threads=1 -cache_size=10485760000``` Before - seekrandom : 3715.432 micros/op 269 ops/sec; 1394.9 MB/s (16149 of 16149 found) seekrandom : 3687.177 micros/op 271 ops/sec; 1405.6 MB/s (16273 of 16273 found) seekrandom : 3709.646 micros/op 269 ops/sec; 1397.1 MB/s (16175 of 16175 found) readseq : 0.369 micros/op 2711321 ops/sec; 1406.6 MB/s readseq : 0.363 micros/op 2754092 ops/sec; 1428.8 MB/s readseq : 0.372 micros/op 2688046 ops/sec; 1394.6 MB/s After - seekrandom : 3606.830 micros/op 277 ops/sec; 1436.9 MB/s (16636 of 16636 found) seekrandom : 3594.467 micros/op 278 ops/sec; 1441.9 MB/s (16693 of 16693 found) seekrandom : 3597.919 micros/op 277 ops/sec; 1440.5 MB/s (16677 of 16677 found) readseq : 0.354 micros/op 2822809 ops/sec; 1464.5 MB/s readseq : 0.358 micros/op 2795080 ops/sec; 1450.1 MB/s readseq : 0.354 micros/op 2822889 ops/sec; 1464.5 MB/s Pull Request resolved: https://github.com/facebook/rocksdb/pull/9549 Reviewed By: pdillinger Differential Revision: D34310362 Pulled By: anand1976 fbshipit-source-id: 54b27756edf9c9ecfe730a2dce542a7a46743096
-
由 Patrick Somaru 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9599 Reviewed By: jay-zhuang, hodgesds Differential Revision: D34214408 fbshipit-source-id: 6932200772f52ce77e550646ee3d1a928295844a
-
- 22 2月, 2022 1 次提交
-
-
由 Andrew Kryczka 提交于
Summary: Valgrind was failing with the below error because we forgot to destroy the `BackupEngine` object: ``` ==421173== Command: ./db_test2 --gtest_filter=DBTest2.BackupFileTemperature ==421173== Note: Google Test filter = DBTest2.BackupFileTemperature [==========] Running 1 test from 1 test case. [----------] Global test environment set-up. [----------] 1 test from DBTest2 [ RUN ] DBTest2.BackupFileTemperature --421173-- WARNING: unhandled amd64-linux syscall: 425 --421173-- You may be able to write your own handler. --421173-- Read the file README_MISSING_SYSCALL_OR_IOCTL. --421173-- Nevertheless we consider this a bug. Please report --421173-- it at http://valgrind.org/support/bug_reports.html. [ OK ] DBTest2.BackupFileTemperature (3366 ms) [----------] 1 test from DBTest2 (3371 ms total) [----------] Global test environment tear-down [==========] 1 test from 1 test case ran. (3413 ms total) [ PASSED ] 1 test. ==421173== ==421173== HEAP SUMMARY: ==421173== in use at exit: 13,042 bytes in 195 blocks ==421173== total heap usage: 26,022 allocs, 25,827 frees, 27,555,265 bytes allocated ==421173== ==421173== 8 bytes in 1 blocks are possibly lost in loss record 6 of 167 ==421173== at 0x4838DBF: operator new(unsigned long) (vg_replace_malloc.c:344) ==421173== by 0x8D4606: allocate (new_allocator.h:114) ==421173== by 0x8D4606: allocate (alloc_traits.h:445) ==421173== by 0x8D4606: _M_allocate (stl_vector.h:343) ==421173== by 0x8D4606: reserve (vector.tcc:78) ==421173== by 0x8D4606: rocksdb::BackupEngineImpl::Initialize() (backupable_db.cc:1174) ==421173== by 0x8D5473: Initialize (backupable_db.cc:918) ==421173== by 0x8D5473: rocksdb::BackupEngine::Open(rocksdb::BackupEngineOptions const&, rocksdb::Env*, rocksdb::BackupEngine**) (backupable_db.cc:937) ==421173== by 0x50AC8F: Open (backup_engine.h:585) ==421173== by 0x50AC8F: rocksdb::DBTest2_BackupFileTemperature_Test::TestBody() (db_test2.cc:6996) ... ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9610 Test Plan: ``` $ make -j24 ROCKSDBTESTS_SUBSET=db_test2 valgrind_check_some ``` Reviewed By: akankshamahajan15 Differential Revision: D34371210 Pulled By: ajkr fbshipit-source-id: 68154fcb0c51b28222efa23fa4ee02df8d925a18
-
- 21 2月, 2022 1 次提交
-
-
由 Andrew Kryczka 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9609 Reviewed By: riversand963 Differential Revision: D34370309 Pulled By: ajkr fbshipit-source-id: 5fc9306439aefa4b2d61d847534ea6758c30b6a5
-
- 19 2月, 2022 9 次提交
-
-
由 Akanksha Mahajan 提交于
Summary: Change enum SizeApproximationFlags to enum and class and add overloaded operators for the transition between enum class and uint8_t Pull Request resolved: https://github.com/facebook/rocksdb/pull/9604 Test Plan: Circle CI jobs Reviewed By: riversand963 Differential Revision: D34360281 Pulled By: akankshamahajan15 fbshipit-source-id: 6351dfdb717ae3c4530d324c3d37a8ecb01dd1ef
-
由 Jay Zhuang 提交于
Summary: Add Temperature hints information from RocksDB in API `NewSequentialFile()`. backup and checkpoint operations need to open the source files with `NewSequentialFile()`, which will have the temperature hints. Other operations are not covered. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9499 Test Plan: Added unittest Reviewed By: pdillinger Differential Revision: D34006115 Pulled By: jay-zhuang fbshipit-source-id: 568b34602b76520e53128672bd07e9d886786a2f
-
由 Akanksha Mahajan 提交于
Summary: This PR adds support for new APIs Async Read that reads the data asynchronously and Poll API that checks if requested read request has completed or not. Usage: In RocksDB, we are currently planning to prefetch data asynchronously during sequential scanning and RocksDB will call these APIs to prefetch more data in advanced. Design: - ReadAsync API submits the read request to underlying FileSystem in order to read data asynchronously. When read request is completed, callback function will be called. cb_arg is used by RocksDB to track the original request submitted and IOHandle is used by FileSystem to keep track of IO requests at their level. - The Poll API is added in FileSystem because the call could end up handling completions for multiple different files which is not specific to a FSRandomAccessFile instance. There could be multiple outstanding file reads from different files in future and they can complete in any order. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9564 Test Plan: Test will be added in separate PR. Reviewed By: anand1976 Differential Revision: D34226216 Pulled By: akankshamahajan15 fbshipit-source-id: 95e64edafb17f543f7232421d51e2665a3267f69
-
由 Bo Wang 提交于
Summary: [Compaction::IsTrivialMove](https://github.com/facebook/rocksdb/blob/a2b9be42b6d5ac4d44bcc6a9451a825440000769/db/compaction/compaction.cc#L318) checks whether allow_trivial_move is set, and if so it returns the value of is_trivial_move_. The allow_trivial_move option is there for universal compaction. So when this is set and leveled compaction is enabled, then useful code that follows this block never gets a chance to run. A check that [compaction_style == kCompactionStyleUniversal](https://github.com/facebook/rocksdb/blob/320d9a8e8a1b6998f92934f87fc71ad8bd6d4596/db/db_impl/db_impl_compaction_flush.cc#L1030) should be added to avoid doing the wrong thing for leveled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9586 Test Plan: To reproduce this: First edit db/compaction/compaction.cc with ``` diff --git a/db/compaction/compaction.cc b/db/compaction/compaction.cc index 7ae50b91e..52dd489b1 100644 --- a/db/compaction/compaction.cc +++ b/db/compaction/compaction.cc @@ -319,6 +319,8 @@ bool Compaction::IsTrivialMove() const { // input files are non overlapping if ((mutable_cf_options_.compaction_options_universal.allow_trivial_move) && (output_level_ != 0)) { + printf("IsTrivialMove:: return %d because universal allow_trivial_move\n", (int) is_trivial_move_); + // abort(); return is_trivial_move_; } ``` And then run ``` ./db_bench --benchmarks=fillseq --allow_concurrent_memtable_write=false --level0_file_num_compaction_trigger=4 --level0_slowdown_writes_trigger=20 --level0_stop_writes_trigger=30 --max_background_jobs=8 --max_write_buffer_number=8 --db=/data/m/rx --wal_dir=/data/m/rx --num=800000000 --num_levels=8 --key_size=20 --value_size=400 --block_size=8192 --cache_size=51539607552 --cache_numshardbits=6 --compression_max_dict_bytes=0 --compression_ratio=0.5 --compression_type=lz4 --bytes_per_sync=8388608 --cache_index_and_filter_blocks=1 --cache_high_pri_pool_ratio=0.5 --benchmark_write_rate_limit=0 --write_buffer_size=16777216 --target_file_size_base=16777216 --max_bytes_for_level_base=67108864 --verify_checksum=1 --delete_obsolete_files_period_micros=62914560 --max_bytes_for_level_multiplier=8 --statistics=0 --stats_per_interval=1 --stats_interval_seconds=20 --histogram=1 --memtablerep=skip_list --bloom_bits=10 --open_files=-1 --subcompactions=1 --compaction_style=0 --min_level_to_compress=3 --level_compaction_dynamic_level_bytes=true --pin_l0_filter_and_index_blocks_in_cache=1 --soft_pending_compaction_bytes_limit=167503724544 --hard_pending_compaction_bytes_limit=335007449088 --min_level_to_compress=0 --use_existing_db=0 --sync=0 --threads=1 --memtablerep=vector --allow_concurrent_memtable_write=false --disable_wal=1 --seed=1641328309 --universal_allow_trivial_move=1 ``` Example output with the debug code added ``` IsTrivialMove:: return 0 because universal allow_trivial_move IsTrivialMove:: return 0 because universal allow_trivial_move ``` After this PR, the bug is fixed. Reviewed By: ajkr Differential Revision: D34350451 Pulled By: gitbw95 fbshipit-source-id: 3232005cc47c40a7e75d316cfc7960beb5bdff3a
-
由 pat somaru 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9602 Reviewed By: jay-zhuang Differential Revision: D34350406 Pulled By: likewhatevs fbshipit-source-id: caa81f272a429fbf7293f0588ea24cc53b29ee98
-
由 Jay Zhuang 提交于
Summary: Add last level and non-last level read statistics: ``` LAST_LEVEL_READ_BYTES, LAST_LEVEL_READ_COUNT, NON_LAST_LEVEL_READ_BYTES, NON_LAST_LEVEL_READ_COUNT, ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9519 Test Plan: added unittest Reviewed By: siying Differential Revision: D34062539 Pulled By: jay-zhuang fbshipit-source-id: 908644c3050878b4234febdc72e3e19d89af38cd
-
由 mrambacher 提交于
Summary: Make FilterPolicy into a Customizable class. Allow new FilterPolicy to be discovered through the ObjectRegistry Pull Request resolved: https://github.com/facebook/rocksdb/pull/9590 Reviewed By: pdillinger Differential Revision: D34327367 Pulled By: mrambacher fbshipit-source-id: 37e7edac90ec9457422b72f359ab8ef48829c190
-
由 Patrick Somaru 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9598 Reviewed By: jay-zhuang, hodgesds Differential Revision: D34130191 fbshipit-source-id: e5413f7d6af70a66940022d153b64a3383eccff1
-
由 Jay Zhuang 提交于
Summary: RocksDB try to provide temperature information in the event listener callbacks. The information is not guaranteed, as some operation like backup won't have these information. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9591 Test Plan: Added unittest Reviewed By: siying, pdillinger Differential Revision: D34309339 Pulled By: jay-zhuang fbshipit-source-id: 4aca4f270f99fa49186d85d300da42594663d6d7
-
- 18 2月, 2022 12 次提交
-
-
由 Andrew Kryczka 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/9595 Reviewed By: riversand963 Differential Revision: D34329906 Pulled By: ajkr fbshipit-source-id: 508601856fa9bee4d40f4a68d14d333ef2143d40
-
由 Peter Dillinger 提交于
Summary: `ColumnFamilyOptions::OldDefaults` and `DBOptions::OldDefaults` now deprecated. Were previously overlooked with `Options::OldDefaults` in https://github.com/facebook/rocksdb/issues/9363 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9594 Test Plan: comments only Reviewed By: jay-zhuang Differential Revision: D34318592 Pulled By: pdillinger fbshipit-source-id: 773c97a61e2a8290ae154f363dd61c1f35a9dd16
-
由 Alan Paxton 提交于
Summary: Extend the plugin architecture to allow for the inclusion, building and testing of Java and JNI components of a plugin. This will cause the JAR built by `$ make rocksdbjava` to include the extra functionality provided by the plugin, and will cause `$ make jtest` to add the java tests provided by the plugin to the tests built and run by Java testing. The plugin's `<plugin>.mk` file can define: ``` <plugin>_JNI_NATIVE_SOURCES <plugin>_NATIVE_JAVA_CLASSES <plugin>_JAVA_TESTS ``` The plugin should provide java/src, java/test and java/rocksjni directories. When a plugin is required to be build it must be named in the ROCKSDB_PLUGINS environment variable (as per the plugin architecture). This now has the effect of adding the files specified by the above definitions to the appropriate parts of the build. An example of a plugin with a Java component can be found as part of the hdfs plugin in https://github.com/riversand963/rocksdb-hdfs-env - at the time of writing the Java part of this fails tests, and needs a little work to complete, but it builds correctly under the plugin model. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9575 Reviewed By: hx235 Differential Revision: D34253948 Pulled By: riversand963 fbshipit-source-id: b3dde5da06f3d3c25c54246892097ae2a369b42d
-
由 Peter Dillinger 提交于
Summary: Various comments, mostly about SliceTransform + prefix extractors. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9533 Test Plan: comments only Reviewed By: ajkr Differential Revision: D34094367 Pulled By: pdillinger fbshipit-source-id: 9742ce3b89ef7fd5c5e748fec862e6361ed44e95
-
由 Alan Paxton 提交于
Remove previously deprecated Java where RocksDB also removed it, or where no direct equivalent existed. (#9576) Summary: For RocksDB v7 major release. Remove previously deprecated Java API methods and associated tests - where equivalent/alternative functionality exists and is already tested AND - where the core RocksDB function/feature has also been removed - OR the functionality exists only in Java so the previous deprecation only affected Java methods RETAIN deprecated Java which reflects functionality which is deprecated by, but also still supported by, the core of RocksDB. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9576 Reviewed By: ajkr Differential Revision: D34314983 Pulled By: jay-zhuang fbshipit-source-id: 7cf9c17e3e07be9d289beb99f81b71e8e09ac403
-
由 Peter Dillinger 提交于
Summary: We don't have any evidence of people using these to build custom filters. The recommended way of customizing filter handling is to defer to various built-in policies based on FilterBuildingContext (e.g. to build Monkey filtering policy). With old API, we have evidence of people modifying keys going into filter, but most cases of that can be handled with prefix_extractor. Having FilterBitsBuilder+Reader in the public API is an ogoing hinderance to code evolution (e.g. recent new Finish and MaybePostVerify), and so this change removes them from the public API for 7.0. Maybe they will come back in some form later, but lacking evidence of them providing value in the public API, we want to take back more freedom to evolve these. With this moved to internal-only, there is no rush to clean up the complex Finish signatures, or add memory allocator support, but doing so is much easier with them out of public API, for example to use CacheAllocationPtr without exposing it in the public API. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9592 Test Plan: cosmetic changes only Reviewed By: hx235 Differential Revision: D34315470 Pulled By: pdillinger fbshipit-source-id: 03e03bb66a72c73df2c464d2dbbbae906dd8f99b
-
由 anand76 提交于
Summary: The NUM_INDEX_AND_FILTER_BLOCKS_READ_PER_LEVEL, NUM_DATA_BLOCKS_READ_PER_LEVEL, and NUM_SST_READ_PER_LEVEL stats were being recorded only when the last file in a level happened to have hits. They are supposed to be updated for every level. Also, there was some overcounting of GetContextStats. This PR fixes both the problems. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9583 Test Plan: Update the unit test in db_basic_test Reviewed By: akankshamahajan15 Differential Revision: D34308044 Pulled By: anand1976 fbshipit-source-id: b3b36020fda26ba91bc6e0e47d52d58f4d7f656e
-
由 Siddhartha Roychowdhury 提交于
Summary: When WAL compression is enabled, add a record (new record type) to store the compression type to indicate that all subsequent records are compressed. The log reader will store the compression type when this record is encountered and use the type to uncompress the subsequent records. Compress and uncompress to be implemented in subsequent diffs. Enabled WAL compression in some WAL tests to check for regressions. Some tests that rely on offsets have been disabled. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9556 Reviewed By: anand1976 Differential Revision: D34308216 Pulled By: sidroyc fbshipit-source-id: 7f10595e46f3277f1ea2d309fbf95e2e935a8705
-
由 Jay Zhuang 提交于
Summary: Add event callback for subcompaction and adds a sub_job_id to identify it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9311 Reviewed By: ajkr Differential Revision: D33892707 Pulled By: jay-zhuang fbshipit-source-id: 57b5e5e594d61b2112d480c18a79a36751f65a4e
-
由 Peter Dillinger 提交于
Summary: in HISTORY.md Pull Request resolved: https://github.com/facebook/rocksdb/pull/9593 Test Plan: release note only Reviewed By: siying Differential Revision: D34318189 Pulled By: pdillinger fbshipit-source-id: ba2eca8bede2d42a3fefd10b954b92cb54f831f2
-
由 Alan Paxton 提交于
Summary: For RocksJava 7 we will move from requiring Java 7 to Java 8. * This simplifies the `Makefile` as we no longer need to deal with Java 7; so we no longer use `javah`. * Added a java-version target which is invoked by the java target, and which exits if the version of java being used is not 8 or greater. * Enforces java 8 as a minimum. * Fixed CMake build. * Fixed broken java event listener test, as the test was broken and the assertions in the callbacks were not causing assertions in the tests. The callbacks now queue up assertion errors for the main thread of the tests to check. * Fixed C++ dangling pointers in the test code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9541 Reviewed By: pdillinger Differential Revision: D34214929 Pulled By: jay-zhuang fbshipit-source-id: fdff348758d0a23a742e83c87d5f54073ce16ca6
-
由 Adam Retter 提交于
Summary: See https://github.com/facebook/rocksdb/issues/9388#issuecomment-1029583789 Pull Request resolved: https://github.com/facebook/rocksdb/pull/9500 Reviewed By: pdillinger Differential Revision: D34114687 Pulled By: jay-zhuang fbshipit-source-id: 22129d99ccd0dba7e8f1b263ddc5520d939641bf
-
- 17 2月, 2022 7 次提交
-
-
由 Andrew Kryczka 提交于
Summary: Users can set the priority for file reads associated with their operation by setting `ReadOptions::rate_limiter_priority` to something other than `Env::IO_TOTAL`. Rate limiting `VerifyChecksum()` and `VerifyFileChecksums()` is the motivation for this PR, so it also includes benchmarks and minor bug fixes to get that working. `RandomAccessFileReader::Read()` already had support for rate limiting compaction reads. I changed that rate limiting to be non-specific to compaction, but rather performed according to the passed in `Env::IOPriority`. Now the compaction read rate limiting is supported by setting `rate_limiter_priority = Env::IO_LOW` on its `ReadOptions`. There is no default value for the new `Env::IOPriority` parameter to `RandomAccessFileReader::Read()`. That means this PR goes through all callers (in some cases multiple layers up the call stack) to find a `ReadOptions` to provide the priority. There are TODOs for cases I believe it would be good to let user control the priority some day (e.g., file footer reads), and no TODO in cases I believe it doesn't matter (e.g., trace file reads). The API doc only lists the missing cases where a file read associated with a provided `ReadOptions` cannot be rate limited. For cases like file ingestion checksum calculation, there is no API to provide `ReadOptions` or `Env::IOPriority`, so I didn't count that as missing. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9424 Test Plan: - new unit tests - new benchmarks on ~50MB database with 1MB/s read rate limit and 100ms refill interval; verified with strace reads are chunked (at 0.1MB per chunk) and spaced roughly 100ms apart. - setup command: `./db_bench -benchmarks=fillrandom,compact -db=/tmp/testdb -target_file_size_base=1048576 -disable_auto_compactions=true -file_checksum=true` - benchmarks command: `strace -ttfe pread64 ./db_bench -benchmarks=verifychecksum,verifyfilechecksums -use_existing_db=true -db=/tmp/testdb -rate_limiter_bytes_per_sec=1048576 -rate_limit_bg_reads=1 -rate_limit_user_ops=true -file_checksum=true` - crash test using IO_USER priority on non-validation reads with https://github.com/facebook/rocksdb/issues/9567 reverted: `python3 tools/db_crashtest.py blackbox --max_key=1000000 --write_buffer_size=524288 --target_file_size_base=524288 --level_compaction_dynamic_level_bytes=true --duration=3600 --rate_limit_bg_reads=true --rate_limit_user_ops=true --rate_limiter_bytes_per_sec=10485760 --interval=10` Reviewed By: hx235 Differential Revision: D33747386 Pulled By: ajkr fbshipit-source-id: a2d985e97912fba8c54763798e04f006ccc56e0c
-
由 Yanqin Jin 提交于
Summary: The following sequence of events can cause silent data loss for write-committed transactions. ``` Time thread 1 bg flush | db->Put("a") | txn = NewTxn() | txn->Put("b", "v") | txn->Prepare() // writes only to 5.log | db->SwitchMemtable() // memtable 1 has "a" | // close 5.log, | // creates 8.log | trigger flush | pick memtable 1 | unlock db mutex | write new sst | txn->ctwb->Put("gtid", "1") // writes 8.log | txn->Commit() // writes to 8.log | // writes to memtable 2 | compute min_log_number_to_keep_2pc, this | will be 8 (incorrect). | | Purge obsolete wals, including 5.log | V ``` At this point, writes of txn exists only in memtable. Close db without flush because db thinks the data in memtable are backed by log. Then reopen, the writes are lost except key-value pair {"gtid"->"1"}, only the commit marker of txn is in 8.log The reason lies in `PrecomputeMinLogNumberToKeep2PC()` which calls `FindMinPrepLogReferencedByMemTable()`. In the above example, when bg flush thread tries to find obsolete wals, it uses the information computed by `PrecomputeMinLogNumberToKeep2PC()`. The return value of `PrecomputeMinLogNumberToKeep2PC()` depends on three components - `PrecomputeMinLogNumberToKeepNon2PC()`. This represents the WAL that has unflushed data. As the name of this method suggests, it does not account for 2PC. Although the keys reside in the prepare section of a previous WAL, the column family references the current WAL when they are actually inserted into the memtable during txn commit. - `prep_tracker->FindMinLogContainingOutstandingPrep()`. This represents the WAL with a prepare section but the txn hasn't committed. - `FindMinPrepLogReferencedByMemTable()`. This represents the WAL on which some memtables (mutable and immutable) depend for their unflushed data. The bug lies in `FindMinPrepLogReferencedByMemTable()`. Originally, this function skips checking the column families that are being flushed, but the unit test added in this PR shows that they should not be. In this unit test, there is only the default column family, and one of its memtables has unflushed data backed by a prepare section in 5.log. We should return this information via `FindMinPrepLogReferencedByMemTable()`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9571 Test Plan: ``` ./transaction_test --gtest_filter=*/TransactionTest.SwitchMemtableDuringPrepareAndCommit_WC/* make check ``` Reviewed By: siying Differential Revision: D34235236 Pulled By: riversand963 fbshipit-source-id: 120eb21a666728a38dda77b96276c6af72b008b1
-
由 Peter Dillinger 提交于
Summary: As in ``` db_stress: table/block_based/filter_policy.cc:316: rocksdb::{anonymous}::FastLocalBloomBitsBuilder::FastLocalBloomBitsBuilder(int, std::atomic<long int>*, std::shared_ptr<rocksdb::CacheReservationManager>, bool): Assertion `millibits_per_key >= 1000' failed. ``` This assertion failure was actually happening with our RibbonFilterPolicy which falls back to Bloom for some cases, often for flush, but was missing new special logic to skip generating filter for 0 bits per key case. Fixed by adding the logic in other builtin FilterPolicy implementations. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9585 Test Plan: Updated db_bloom_filter_test to do more integration testing of the RibbonFilterPolicy ("auto Ribbon") class, incl regression test this with SkipFilterOnEssentiallyZeroBpk Reviewed By: ajkr Differential Revision: D34295101 Pulled By: pdillinger fbshipit-source-id: 3488eb207fc1d67bbbd1301313714aa1b6406e6e
-
由 sdong 提交于
Summary: Opening DB as seconeary instance has been supported in ldb but it is not mentioned in --help. Mention it there. The part of the help message after the modification: ``` commands MUST specify --db=<full_path_to_db_directory> when necessary commands can optionally specify --env_uri=<uri_of_environment> or --fs_uri=<uri_of_filesystem> if necessary --secondary_path=<secondary_path> to open DB as secondary instance. Operations not supported in secondary instance will fail. ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/9582 Test Plan: Build and run ldb --help Reviewed By: riversand963 Differential Revision: D34286427 fbshipit-source-id: e56c5290d0548098ab6acc6dde2167f5a64f34f3
-
由 Jay Zhuang 提交于
Summary: Remove deprecated remote compaction APIs `CompactionService::Start()` and `CompactionService::WaitForComplete()`. Please use `CompactionService::StartV2()`, `CompactionService::WaitForCompleteV2()` instead, which provides the same information plus extra data like priority, db_id, etc. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9570 Test Plan: CI Reviewed By: riversand963 Differential Revision: D34255969 Pulled By: jay-zhuang fbshipit-source-id: c6376eccdd1123f1c42ab53771b5f65f8160c325
-
由 mrambacher 提交于
Summary: Add support for doubles to ObjectLibrary::PatternEntry. This support will allow patterns containing a non-integer number to be parsed correctly. Added appropriate test cases to cover this new option. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9577 Reviewed By: pdillinger Differential Revision: D34269763 Pulled By: mrambacher fbshipit-source-id: b5ce16cbd3665c2974ec0f3412ef2b403ef8b155
-
由 Yueh-Hsuan Chiang 提交于
Summary: Add Solana's RocksDB use case in USERS.md. Solana is a fast, secure, scalable, and decentralized blockchain. It uses RocksDB as the underlying storage for its ledger store. github: https://github.com/solana-labs/solana Pull Request resolved: https://github.com/facebook/rocksdb/pull/9558 Reviewed By: jay-zhuang Differential Revision: D34249087 Pulled By: riversand963 fbshipit-source-id: 7524eff4952e2676e8520ac491ffb6a686fb4d7e
-