Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.

Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties

Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.

Reviewers: yhchiang, igor.sugak, rven, igor

Reviewed By: rven, igor

Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D35373

Summary:
If accumulated_num_non_deletions_ were ever smaller than
accumulated_num_deletions_, the computation of
"accumulated_num_non_deletions_ - accumulated_num_deletions_"
would result in a logically "negative" value, but since
the two operands are unsigned (uint64_t), the result corresponding
to e.g., -1 would 2^64-1.

Instead, return 0 in that case.

Test Plan:
  - ensure "make check" still passes
  - temporarily add an "abort();" call in the new "if"-block, and
      observe that it fails in some test cases.  However, note that
      this case is triggered only when the two numbers are equal.
      Thus, no test case triggers the erroneous behavior this
      change is designed to avoid. If anyone can construct a
      scenario in which that bug would be triggered, I'll be
      happy to add a test case.

Reviewers: ljin, igor, rven, igor.sugak, yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D36489

Summary: Int is used for level size targets when options_.level_compaction_dynamic_level_bytes=true, which will cause overflow when database grows big. Fix it.

Test Plan: Add a new unit test which fails without the fix.

Reviewers: rven, yhchiang, MarkCallaghan, igor

Reviewed By: igor

Subscribers: leveldb, dhruba, yoshinorim

Differential Revision: https://reviews.facebook.net/D36453

Summary: In some db_test tests sync points are not cleared which will cause unexpected results in the next tests. Clean them up in test cleaning up.

Test Plan:
Run the same tests that used to fail:

build using USE_CLANG=1 and run
./db_test --gtest_filter="DBTest.CompressLevelCompaction:*DBTestUniversalCompactionParallel*"

Reviewers: rven, yhchiang, igor

Reviewed By: igor

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D36429

Summary:
Check compression level of start_level with output_compression
before allowing trivial move

Test Plan: New DBTest CompressLevelCompactionThirdPath added

Reviewers: igor, yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D36213

Summary:
This diff fixes a crash found when an empty database is opened in readonly mode.
We now check the number of levels before we open the DB as a compacted DB.

Test Plan: DBTest.EmptyCompactedDB

Reviewers: igor, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D36327

Summary:
Fix the make unity build. The local stats variable name was shadowing a
global stats variable.

Test Plan:
Run the build
OPT=-DTRAVIS V=1 make unity

Reviewers: sdong, igor

Reviewed By: igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D36285

Summary: After you run `arc diff`, just run `build_tools/trigger_jenkins_test.sh` and Jenkins will test your diff!

Test Plan: Triggered a build to jenkins

Reviewers: sdong, rven, IslamAbdelRahman, anthony, yhchiang, meyering

Reviewed By: meyering

Subscribers: meyering, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D36021

Summary:
After recent change of DBTest.DynamicCompactionOptions, occasionally hit another non-deterministic case where L0 showdown is triggered while timeout should not triggered for hard limit.
Fix it by increasing L0 slowdown trigger at the same time.

Test Plan: Run the failed test.

Reviewers: igor, rven

Reviewed By: rven

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D36219

Summary:
With this change, we use L1 and up to store compaction outputs in universal compaction.
The compaction pick logic stays the same. Outputs are stored in the largest "level" as possible.

If options.num_levels=1, it behaves all the same as now.

Test Plan:
1) convert most of existing unit tests for universal comapaction to include the option of one level and multiple levels.
2) add a unit test to cover parallel compaction in universal compaction and run it in one level and multiple levels
3) add unit test to migrate from multiple level setting back to one level setting
4) add a unit test to insert keys to trigger multiple rounds of compactions and verify results.

Reviewers: rven, kradhakrishnan, yhchiang, igor

Reviewed By: igor

Subscribers: meyering, leveldb, MarkCallaghan, dhruba

Differential Revision: https://reviews.facebook.net/D34539

Summary:
Just couple of small changes:
1. removed signal_test, since it doesn't seem useful and we don't even run it as part of `make check`
2. moved perf_context_test to TESTS instead of PROGRAMS
3. `make release` probably shouldn't compile benchmarks. We currently rely on `make release` building db_bench (via Jenkins), so I left db_bench there.

This is just a minor cleanup. We need to rethink our targets since they are a bit messy right now. We can do this during our tech debt week.

Test Plan: make release

Reviewers: anthony, rven, yhchiang, sdong, meyering

Reviewed By: meyering

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D36171

Summary:
The --stats_interval_seconds determines interval for stats reporting
and overrides --stats_interval when set. I also changed tools/benchmark.sh
to report stats every 60 seconds so I can avoid trying to figure out a
good value for --stats_interval per test and per storage device.

Task ID: #6631621

Blame Rev:

Test Plan:
run tools/run_flash_bench, look at output

Revert Plan:

Database Impact:

Memcache Impact:

Other Notes:

EImportant:

- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -

Reviewers: igor

Reviewed By: igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D36189

Summary:
Cleaning up log files can do heavy IO, since we call ftruncate() in the destructor. We don't want to call ftruncate() in user threads.

This diff moves cleaning to background threads (flush and compaction)

Test Plan: make check, will also run valgrind

Reviewers: yhchiang, rven, MarkCallaghan, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D36177

Summary:
This makes run_flash_bench.sh configurable. Previously it was hardwired for 1B keys and tests
ran for 12 hours each. That kept me from using it. This makes it configuable, adds more tests,
makes the duration per-test configurable and refactors the test scripts.

Adds the seekrandomwhilemerging test to db_bench which is the same as seekrandomwhilewriting except
the writer thread does Merge rather than Put.

Forces the stall-time column in compaction IO stats to use a fixed format (H:M:S) which makes
it easier to scrape and parse. Also adds an option to AppendHumanMicros to force a fixed format.
Sometimes automation and humans want different format.

Calls thread->stats.AddBytes(bytes); in db_bench for more tests to get the MB/sec summary
stats in the output at test end.

Adds the average ingest rate to compaction IO stats. Output now looks like:
https://gist.github.com/mdcallag/2bd64d18be1b93adc494

More information on the benchmark output is at https://gist.github.com/mdcallag/db43a58bd5ac624f01e1

For benchmark.sh changes default RocksDB configuration to reduce stalls:
* min_level_to_compress from 2 to 3
* hard_rate_limit from 2 to 3
* max_grandparent_overlap_factor and max_bytes_for_level_multiplier from 10 to 8
* L0 file count triggers from 4,8,12 to 4,12,20 for (start,stall,stop)

Task ID: #6596829

Blame Rev:

Test Plan:
run tools/run_flash_bench.sh

Revert Plan:

Database Impact:

Memcache Impact:

Other Notes:

EImportant:

- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -

Reviewers: igor

Reviewed By: igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D36075

Summary: as title

Test Plan: clang builds

Reviewers: leveldb

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D36183

Summary: Most of the approach is copied from WebSQL's MySQL branch. It's nice that we can do this without touching core RocksDB code.

Test Plan: Compiles and runs. Didn't test flashback code, as I don't have flashback device and most if it is c/p

Reviewers: MarkCallaghan, sdong

Reviewed By: sdong

Subscribers: rven, lgalanis, kradhakrishnan, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D35391

Summary:
This fixes two bugs: "make clean" would never remove the generated
file, util/build_version.cc, and since D33591, would be regenerated
only if it were absent.
* Makefile (clean): Remove the generated file.
(util/build_version.cc): Depend on the no-prereq FORCE target,
so that this target's rules are always run.
Since this is a generated file, make it read-only.
Also, be sure to remove the temporary file when it is the same
as the original.

Test Plan:
Ensure that we attempt regeneration every time.
Make it empty with an up-to-date time stamp and demonstrate
that it is rebuilt with the expected content:

  $ : > util/build_version.cc
  $ make util/build_version.o
   GEN      util/build_version.cc
   GEN      util/build_version.d
   GEN      util/build_version.cc
   CC       util/build_version.o
  $ cat util/build_version.cc
  #include "build_version.h"
  const char* rocksdb_build_git_sha = "rocksdb_build_git_sha:v3.10-2-gb30e72a";
  const char* rocksdb_build_git_date = "rocksdb_build_git_date:2015-03-27";
  const char* rocksdb_build_compile_date = __DATE__;

Reviewers: igor.sugak, sdong, ljin, igor, rven

Reviewed By: rven

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D36087

Summary:
Assign the string properties to const string variables under the
DB::Properties namespace. This helps catch typos during compilation and
also consolidates the property definition in one place.

Test Plan: Run rocksdb unit tests

Reviewers: sdong, yoshinorim, igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D35991

Summary:
Whenever we add new tests in db_sanity_test.cc, the verification test
will fail since the old version db_sanity_test.cc does not have the
newly added test.  This patch makes auto_sanity_test.sh always use
the db_sanity_test.cc of the newer commit.

As a result, a macro guard is added to allow db_sanity_test.cc to be
backward compatible.

Test Plan: tools/auto_sanity_check.sh

Reviewers: sdong, rven, igor

Reviewed By: igor

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D35997

Fix interger overflow on i386 arch

The error was:

util/logging.cc: In function 'int rocksdb::AppendHumanMicros(uint64_t, char*, int)':
error: util/logging.cc:41:39: integer overflow in expression [-Werror=overflow]
} else if (micros < 1000000l * 60 * 60) {
^
error: util/logging.cc:41:39: comparison between signed and unsigned integer expressions [-Werror=sign-compare]

Summary: It's useful to know if we have compression support or no

Test Plan:
Observed this in my LOG:

      2015/03/26-10:34:35.460681 7f5b322b7840 Snappy supported
      2015/03/26-10:34:35.460682 7f5b322b7840 Zlib supported
      2015/03/26-10:34:35.460686 7f5b322b7840 Bzip supported
      2015/03/26-10:34:35.460687 7f5b322b7840 LZ4 NOT supported

Reviewers: sdong, yhchiang

Reviewed By: yhchiang

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D35955

fix compilation error (same as fix #284)

[maa@srv2-nskb-devg2 rocksdb-master]$ CXX=/usr/local/CC/gcc-4.7.4/bin/g++ EXTRA_CXXFLAGS=-std=c++11 DISABLE_WARNING_AS_ERROR=1  make db_bench
  CC       db/db_bench.o
db/db_bench.cc: In member function 'rocksdb::Slice rocksdb::Benchmark::AllocateKey(std::unique_ptr<const char []>*)':
db/db_bench.cc:1434:41: error: use of deleted function 'void std::unique_ptr<_Tp [], _Dp>::reset(_Up) [with _Up = char*; _Tp = const char; _Dp = std::default_delete<const char []>]'
In file included from /usr/local/CC/gcc-4.7.4/lib/gcc/x86_64-unknown-linux-gnu/4.7.4/../../../../include/c++/4.7.4/memory:86:0,
                 from ./include/rocksdb/db.h:14,
                 from ./db/dbformat.h:14,
                 from ./db/db_impl.h:21,
                 from db/db_bench.cc:33:

Summary:
* Makefile (COMPILE_WITH_TSAN): Avoid a link failure by disabling
-pg when building with TSAN enabled.
Now that "make check" builds all $(PROGRAMS), it is linking
a few programs that were not normally linked before.
For example, this would fail to link with the following diagnostic:

  COMPILE_WITH_TSAN=1 make -j40 log_and_apply_bench

    CCLD     log_and_apply_bench
  ld: /usr/lib/../lib64/gcrt1.o: relocation R_X86_64_32S against `__libc_csu_fini' can not be used when making a shared object; recompile with -fPIC
  /usr/lib/../lib64/gcrt1.o: error adding symbols: Bad value
  collect2: error: ld returned 1 exit status
  Makefile:511: recipe for target 'log_and_apply_bench' failed
  make: *** [log_and_apply_bench] Error 1

Since removing -pg is sufficient to get past this link
failure, and no one cares about profiling TSAN-enabled
binaries anyway, we will refrain from linking with -pg
when TSAN testing is enabled.  Use a new variable, "pg"
which is set to "-pg" in most cases, but that is made
empty when COMPILE_WITH_TSAN is set.

Test Plan:
  Now, this succeeds:

    rm -f log_and_apply_bench
    COMPILE_WITH_TSAN=1 make -j40 log_and_apply_bench

Reviewers: igor.sugak, rven, sdong, ljin, igor

Reviewed By: igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D35943

Summary:
Add a missing section title in HISTORY.md

Test Plan:
no code change

Summary:
Fixed a typo in RocksDBSample.java

Test Plan:
make clean
make rocksdbjava -j32
make jtest

Summary:
* Makefile (check): Cause "make check" to build all $(PROGRAMS),
so that it verifies that the few benchmark-only source files that
not already built via "make check" do compile and link successfully.

Test Plan:
run "make clean; make check", and verify that
table/table_reader_bench.cc is now compiled.
Before, it was not, which led to an incomplete fix
for a build break.

Reviewers: ljin, igor.sugak, rven, igor, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D35883

Test Plan: Running make all

Reviewers: sdong

Reviewed By: sdong

Subscribers: rven, yhchiang, igor, meyering, dhruba

Differential Revision: https://reviews.facebook.net/D35889

Summary: Update HISTORY.md for 3.10.0

Test Plan: no code chagne.

Reviewers: sdong, rven, igor

Reviewed By: igor

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D35871

Summary: Fixing issues with get context function.

Test Plan: Run make commit-prereq

Reviewers: sdong, meyering, yhchiang

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D35853

[RocksJava] Added static lz4 support for roccksjavastatic

[RocksJava] Maven build fix

Summary: Fix compile error when NROCKSDB_THREAD_STATUS is not used.

Test Plan: make dbg OPT=-DNROCKSDB_THREAD_STATUS -j32

Reviewers: sdong, igor, rven

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D35847

Summary:
We have addded new stats and perf_context for measuring the merge and filter operation time consumption.
We have bounded all the merge operations within the GUARD statment and collected the total time for these operations in the DB.

Test Plan: WIP

Reviewers: rven, yhchiang, kradhakrishnan, igor, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D34377

[RocksJava] Expose MemEnv in RocksJava