- 24 12月, 2013 1 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: Add a pointer to the engineering design discussion forum. Test Plan: Reviewers: CC: Task ID: # Blame Rev:
-
- 21 12月, 2013 2 次提交
-
-
由 Igor Canadi 提交于
-
由 Igor Canadi 提交于
Summary: Instead of locking and saving a DB state, we can cache a DB state and update it only when it changes. This change reduces lock contention and speeds up read operations on the DB. Performance improvements are substantial, although there is some cost in no-read workloads. I ran the regression tests on my devserver and here are the numbers: overwrite 56345 -> 63001 fillseq 193730 -> 185296 readrandom 771301 -> 1219803 (58% improvement!) readrandom_smallblockcache 677609 -> 862850 readrandom_memtable_sst 710440 -> 1109223 readrandom_fillunique_random 221589 -> 247869 memtablefillrandom 105286 -> 92643 memtablereadrandom 763033 -> 1288862 Test Plan: make asan_check I am also running db_stress Reviewers: dhruba, haobo, sdong, kailiu Reviewed By: haobo CC: leveldb Differential Revision: https://reviews.facebook.net/D14679
-
- 20 12月, 2013 1 次提交
-
-
由 Igor Canadi 提交于
fix missing gflags library
-
- 19 12月, 2013 4 次提交
-
-
由 Mark Callaghan 提交于
Summary: For some tests I want to cache the database prior to running other tests on the same invocation of db_bench. The readtocache test ignores --threads and --reads so those can be used by other tests and it will still do a full read of --num rows with one thread. It might be invoked like: db_bench --benchmarks=readtocache,readrandom --reads 100 --num 10000 --threads 8 Task ID: # Blame Rev: Test Plan: run db_bench Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D14739
-
由 Igor Canadi 提交于
Summary: db_test should be the first to execute because it finds the most bugs. Also, when third parties report issues, we don't want ldb error message, we prefer to have db_test error message. For example, see thread: https://github.com/facebook/rocksdb/issues/25 Test Plan: make check Reviewers: dhruba, haobo, kailiu Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D14715
-
由 Igor Canadi 提交于
Remove utilities/.DS_Store file.
-
由 Igor Canadi 提交于
C bindings: add a bunch of the newer options
-
- 18 12月, 2013 2 次提交
-
-
由 Siying Dong 提交于
Summary: I realized that "D14409 Avoid sorting in Version::Get() by presorting them in VersionSet::Builder::SaveTo()" is not done in an optimized place. SaveTo() is usually inside mutex. Move it to Finalize(), which is called out of mutex. Test Plan: make all check Reviewers: dhruba, haobo, kailiu Reviewed By: dhruba CC: igor, leveldb Differential Revision: https://reviews.facebook.net/D14607
-
由 Siying Dong 提交于
Summary: It seems to be a decision tradeoff in current codes: we make a malloc for every Get() to reduce one malloc for a flush inside mutex. It takes about 5% of CPU time in readrandom tests. We might consider the tradeoff to be the other way around. Test Plan: make all check Reviewers: dhruba, haobo, igor Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D14697
-
- 17 12月, 2013 1 次提交
-
-
由 Josef Šimánek 提交于
-
- 16 12月, 2013 1 次提交
-
-
由 Mike Lin 提交于
-
- 13 12月, 2013 3 次提交
-
-
由 Igor Canadi 提交于
Summary: I realized that manifest will get deleted by PurgeObsoleteFiles in DBImpl, but it is sill cleaner to delete files before we restore the backup Test Plan: backupable_db_test Reviewers: dhruba Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D14619
-
由 Mark Callaghan 提交于
Summary: Adds these counters { WAL_FILE_SYNCED, "rocksdb.wal.synced" } number of writes that request a WAL sync { WAL_FILE_BYTES, "rocksdb.wal.bytes" }, number of bytes written to the WAL { WRITE_DONE_BY_SELF, "rocksdb.write.self" }, number of writes processed by the calling thread { WRITE_DONE_BY_OTHER, "rocksdb.write.other" }, number of writes not processed by the calling thread. Instead these were processed by the current holder of the write lock { WRITE_WITH_WAL, "rocksdb.write.wal" }, number of writes that request WAL logging { COMPACT_READ_BYTES, "rocksdb.compact.read.bytes" }, number of bytes read during compaction { COMPACT_WRITE_BYTES, "rocksdb.compact.write.bytes" }, number of bytes written during compaction Per-interval stats output was updated with WAL stats and correct stats for universal compaction including a correct value for write-amplification. It now looks like: Compactions Level Files Size(MB) Score Time(sec) Read(MB) Write(MB) Rn(MB) Rnp1(MB) Wnew(MB) RW-Amplify Read(MB/s) Write(MB/s) Rn Rnp1 Wnp1 NewW Count Ln-stall Stall-cnt -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 0 7 464 46.4 281 3411 3875 3411 0 3875 2.1 12.1 13.8 621 0 240 240 628 0.0 0 Uptime(secs): 310.8 total, 2.0 interval Writes cumulative: 9999999 total, 9999999 batches, 1.0 per batch, 1.22 ingest GB WAL cumulative: 9999999 WAL writes, 9999999 WAL syncs, 1.00 writes per sync, 1.22 GB written Compaction IO cumulative (GB): 1.22 new, 3.33 read, 3.78 write, 7.12 read+write Compaction IO cumulative (MB/sec): 4.0 new, 11.0 read, 12.5 write, 23.4 read+write Amplification cumulative: 4.1 write, 6.8 compaction Writes interval: 100000 total, 100000 batches, 1.0 per batch, 12.5 ingest MB WAL interval: 100000 WAL writes, 100000 WAL syncs, 1.00 writes per sync, 0.01 MB written Compaction IO interval (MB): 12.49 new, 14.98 read, 21.50 write, 36.48 read+write Compaction IO interval (MB/sec): 6.4 new, 7.6 read, 11.0 write, 18.6 read+write Amplification interval: 101.7 write, 102.9 compaction Stalls(secs): 142.924 level0_slowdown, 0.000 level0_numfiles, 0.805 memtable_compaction, 0.000 leveln_slowdown Stalls(count): 132461 level0_slowdown, 0 level0_numfiles, 3 memtable_compaction, 0 leveln_slowdown Task ID: #3329644, #3301695 Blame Rev: Test Plan: Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D14583
-
由 Igor Canadi 提交于
-
- 12 12月, 2013 5 次提交
-
-
由 Igor Canadi 提交于
Summary: @MarkCallaghan's tests indicate that performance with 8k rows in memtable is much worse than empty memtable. I wanted to add a regression tests that measures this effect, so we could optimize it. However, current config shows 634461 QPS on my devbox. Mark, any idea why this is so much faster than your measurements? Test Plan: Ran the regression test. Reviewers: MarkCallaghan, dhruba, haobo Reviewed By: MarkCallaghan CC: leveldb, MarkCallaghan Differential Revision: https://reviews.facebook.net/D14511
-
由 Siying Dong 提交于
Summary: In get operations, merge_operands is only used in few cases. Lazily initialize it can reduce average latency in some cases Test Plan: make all check Reviewers: haobo, kailiu, dhruba Reviewed By: haobo CC: igor, nkg-, leveldb Differential Revision: https://reviews.facebook.net/D14415 Conflicts: db/db_impl.cc db/memtable.cc
-
由 Siying Dong 提交于
[RocksDB Performance Branch] Avoid sorting in Version::Get() by presorting them in VersionSet::Builder::SaveTo() Summary: Pre-sort files in VersionSet::Builder::SaveTo() so that when getting the value, no need to sort them. It can avoid the costs of vector operations and sorting in Version::Get(). Test Plan: make all check Reviewers: haobo, kailiu, dhruba Reviewed By: dhruba CC: nkg-, igor, leveldb Differential Revision: https://reviews.facebook.net/D14409
-
由 Siying Dong 提交于
Summary: creating new iterators of mem tables can be expensive. Move them out of mutex. DBImpl::WriteLevel0Table()'s mems seems to be a local vector and is only used by flushing. memtables to flush are also immutable, so it should be safe to do so. Test Plan: make all check Reviewers: haobo, dhruba, kailiu Reviewed By: dhruba CC: igor, leveldb Differential Revision: https://reviews.facebook.net/D14577 Conflicts: db/db_impl.cc
-
由 Igor Canadi 提交于
Summary: I have ran a get benchmark where all the data is in the cache and observed that most of the time is spent on waiting for lock in LRUCache. This is an effort to optimize LRUCache. Test Plan: The data was loaded with fillseq. Then, I ran a benchmark: /db_bench --db=/tmp/rocksdb_stat_bench --num=1000000 --benchmarks=readrandom --statistics=1 --use_existing_db=1 --threads=16 --disable_seek_compaction=1 --cache_size=20000000000 --cache_numshardbits=8 --table_cache_numshardbits=8 I ran the benchmark three times. Here are the results: AFTER THE PATCH: 798072, 803998, 811807 BEFORE THE PATCH: 782008, 815593, 763017 Reviewers: dhruba, haobo, kailiu Reviewed By: haobo CC: leveldb Differential Revision: https://reviews.facebook.net/D14571
-
- 11 12月, 2013 8 次提交
-
-
由 Igor Canadi 提交于
Summary: We now delete backups with newer sequence number, so the clients don't have to handle confusing situations when they restore from backup. Test Plan: added a unit test Reviewers: dhruba Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D14547
-
由 Igor Canadi 提交于
-
由 Igor Canadi 提交于
Summary: So fflush() takes a lock which is heavyweight. I added flush_pending_, but more importantly, I removed LogFlush() from foreground threads. Test Plan: ./db_test Reviewers: dhruba, haobo Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D14535
-
由 Siying Dong 提交于
-
由 Igor Canadi 提交于
-
由 Igor Canadi 提交于
Summary: Valgrind complained about BackupableDB. This fixes valgrind errors. Also, I cleaned up some code. Test Plan: valgrind does not complain anymore Reviewers: dhruba Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D14529
-
由 Igor Canadi 提交于
Build shared lib and put linker flags to the end
-
由 Igor Canadi 提交于
Rename leveldb to rocksdb in C api
-
- 10 12月, 2013 5 次提交
-
-
由 Doğan Çeçen 提交于
-
由 Doğan Çeçen 提交于
-
由 Igor Canadi 提交于
-
由 Igor Canadi 提交于
Summary: In this diff I present you BackupableDB v1. You can easily use it to backup your DB and it will do incremental snapshots for you. Let's first describe how you would use BackupableDB. It's inheriting StackableDB interface so you can easily construct it with your DB object -- it will add a method RollTheSnapshot() to the DB object. When you call RollTheSnapshot(), current snapshot of the DB will be stored in the backup dir. To restore, you can just call RestoreDBFromBackup() on a BackupableDB (which is a static method) and it will restore all files from the backup dir. In the next version, it will even support automatic backuping every X minutes. There are multiple things you can configure: 1. backup_env and db_env can be different, which is awesome because then you can easily backup to HDFS or wherever you feel like. 2. sync - if true, it *guarantees* backup consistency on machine reboot 3. number of snapshots to keep - this will keep last N snapshots around if you want, for some reason, be able to restore from an earlier snapshot. All the backuping is done in incremental fashion - if we already have 00010.sst, we will not copy it again. *IMPORTANT* -- This is based on assumption that 00010.sst never changes - two files named 00010.sst from the same DB will always be exactly the same. Is this true? I always copy manifest, current and log files. 4. You can decide if you want to flush the memtables before you backup, or you're fine with backing up the log files -- either way, you get a complete and consistent view of the database at a time of backup. 5. More things you can find in BackupableDBOptions Here is the directory structure I use: backup_dir/CURRENT_SNAPSHOT - just 4 bytes holding the latest snapshot 0, 1, 2, ... - files containing serialized version of each snapshot - containing a list of files files/*.sst - sst files shared between snapshots - if one snapshot references 00010.sst and another one needs to backup it from the DB, it will just reference the same file files/ 0/, 1/, 2/, ... - snapshot directories containing private snapshot files - current, manifest and log files All the files are ref counted and deleted immediatelly when they get out of scope. Some other stuff in this diff: 1. Added GetEnv() method to the DB. Discussed with @haobo and we agreed that it seems right thing to do. 2. Fixed StackableDB interface. The way it was set up before, I was not able to implement BackupableDB. Test Plan: I have a unittest, but please don't look at this yet. I just hacked it up to help me with debugging. I will write a lot of good tests and update the diff. Also, `make asan_check` Reviewers: dhruba, haobo, emayanke Reviewed By: dhruba CC: leveldb, haobo Differential Revision: https://reviews.facebook.net/D14295
-
由 Igor Canadi 提交于
Branch detection did not work in Jenkins. I realized that it set GIT_BRANCH env variable to point to the current branch, so let's try using this for branch detection.
-
- 07 12月, 2013 3 次提交
-
-
由 Igor Canadi 提交于
Summary: This will help me a lot! When we hit an assertion in unittest, we get the whole stack trace now. Also, changed stack trace a bit, we now include actual demangled C++ class::function symbols! Test Plan: Added ASSERT_TRUE(false) to a test, observed a stack trace Reviewers: haobo, dhruba, kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D14499
-
由 Igor Canadi 提交于
Summary: When running regression tests on other branches, this will push values to entity rocksdb_build.$git_branch Test Plan: Ran regression test on regression branch, observed values send to ODS in entity rocksdb_build.regression Reviewers: kailiu Reviewed By: kailiu CC: leveldb Differential Revision: https://reviews.facebook.net/D14493
-
由 Igor Canadi 提交于
Summary: Now DBWithTTL takes DB* and can behave more like StackableDB. This saves us a lot of duplicate work by defining interfaces Test Plan: ttl_test with ASAN - OK Reviewers: emayanke Reviewed By: emayanke CC: leveldb Differential Revision: https://reviews.facebook.net/D14481
-
- 06 12月, 2013 2 次提交
-
-
由 kailiu 提交于
-
由 Mayank Agarwal 提交于
Summary: As title Test Plan: make clean and make Reviewers: igor Reviewed By: igor CC: leveldb Differential Revision: https://reviews.facebook.net/D14469
-
- 05 12月, 2013 2 次提交
-
-
由 Mayank Agarwal 提交于
Summary: This would enable rocksdb users to get the db identity without depending on implementation details(storing that in IDENTITY file) Test Plan: db/db_test (has identity checks) Reviewers: dhruba, haobo, igor, kailiu Reviewed By: dhruba CC: leveldb Differential Revision: https://reviews.facebook.net/D14463
-
由 Vamsi Ponnekanti 提交于
Summary: $title Test Plan: on my dev box Revert Plan: OK Task ID: # Reviewers: emayanke, dhruba, haobo Reviewed By: haobo CC: leveldb Differential Revision: https://reviews.facebook.net/D14451
-