- 18 12月, 2015 1 次提交
-
-
由 sdong 提交于
Summary: Now if inserting to mem table is much faster than writing to files, there is no mechanism users can rely on to avoid stopping for reaching options.max_write_buffer_number. With the commit, if there are more than four maximum write buffers configured, we slow down to the rate of options.delayed_write_rate while we reach the last one. Test Plan: 1. Add a new unit test. 2. Run db_bench with ./db_bench --benchmarks=fillrandom --num=10000000 --max_background_flushes=6 --batch_size=32 -max_write_buffer_number=4 --delayed_write_rate=500000 --statistics based on hard drive and see stopping is avoided with the commit. Reviewers: yhchiang, IslamAbdelRahman, anthony, rven, kradhakrishnan, igor Reviewed By: igor Subscribers: MarkCallaghan, leveldb, dhruba Differential Revision: https://reviews.facebook.net/D52047
-
- 10 12月, 2015 1 次提交
-
-
由 sdong 提交于
Summary: Deprecate options.soft_rate_limit, which is hard to tune, with options.soft_pending_compaction_bytes_limit, which would trigger the slowdown if estimated pending compaction bytes exceeds the threshold. The hope is to make it more striaght-forward to tune. Test Plan: Modify DBTest.SoftLimit to cover options.soft_pending_compaction_bytes_limit instead; run all unit tests. Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, igor, anthony Reviewed By: anthony Subscribers: leveldb, dhruba Differential Revision: https://reviews.facebook.net/D51117
-
- 17 10月, 2015 1 次提交
-
-
由 Yueh-Hsuan Chiang 提交于
Summary: Add rocksdb.num-running-compactions and rocksdb.num-running-flushes to GetIntProperty() that reports the number of currently running compactions / flushes. Test Plan: augmented existing tests in db_test Reviewers: igor, IslamAbdelRahman, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D48693
-
- 14 10月, 2015 1 次提交
-
-
由 Yueh-Hsuan Chiang 提交于
Summary: Correct the comments in db/internal_stats.h Test Plan: no code change Reviewers: igor, IslamAbdelRahman, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D48675
-
- 15 9月, 2015 2 次提交
-
-
由 sdong 提交于
Summary: Add an option to stop writes if compaction lefts behind. If estimated pending compaction bytes is more than threshold specified by options.hard_pending_compaction_bytes_liimt, writes will stop until compactions are cleared to under the threshold. Test Plan: Add unit test DBTest.HardLimit Reviewers: rven, kradhakrishnan, anthony, IslamAbdelRahman, yhchiang, igor Reviewed By: igor Subscribers: MarkCallaghan, leveldb, dhruba Differential Revision: https://reviews.facebook.net/D45999
-
由 Ari Ekmekji 提交于
Summary: Although there are currently counters to keep track of the stall caused by having too many L0 files, there is no distinction as to whether when that stall occurs either (A) L0-L1 compaction is taking place to try and mitigate it, or (B) no L0-L1 compaction has been scheduled at the moment. This diff adds a counter for (A) so that the nature of L0 stalls can be better understood. Test Plan: make all && make check Reviewers: sdong, igor, anthony, noetzli, yhchiang Reviewed By: yhchiang Subscribers: MarkCallaghan, dhruba Differential Revision: https://reviews.facebook.net/D46749
-
- 26 8月, 2015 1 次提交
-
-
由 Yueh-Hsuan Chiang 提交于
Summary: This patch adds "rocksdb.aggregated-table-properties" and "rocksdb.aggregated-table-properties-at-levelN", the former returns the aggreated table properties of a column family, while the later returns the aggregated table properties of the specified level N. Test Plan: Added tests in db_test Reviewers: igor, sdong, IslamAbdelRahman, anthony Reviewed By: anthony Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D45087
-
- 21 8月, 2015 2 次提交
-
-
由 sdong 提交于
Summary: Add a counter of estimated bytes the DB needs to compact for all the compactions to finish. Expose it as a DB Property. In the future, we can use threshold of this counter to replace soft rate limit and hard rate limit. A single threshold of estimated compaction debt in bytes will be easier for users to reason about when should slow down and stopping than more abstract soft and hard rate limits. Test Plan: Add unit tests Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, anthony, igor Reviewed By: igor Subscribers: leveldb, dhruba Differential Revision: https://reviews.facebook.net/D44205
-
由 Islam AbdelRahman 提交于
Summary: Add a new DB property that calculate the total size of files used by all RocksDB Versions Test Plan: Unittests for the new property Reviewers: igor, yhchiang, anthony, rven, kradhakrishnan, sdong Reviewed By: sdong Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D44799
-
- 20 8月, 2015 1 次提交
-
-
由 Yueh-Hsuan Chiang 提交于
Summary: Currently, GetIntProperty("rocksdb.cur-size-all-mem-tables") only returns the memory usage by those memtables which have not yet been flushed. This patch introduces GetIntProperty("rocksdb.size-all-mem-tables"), which includes the memory usage by all the memtables, includes those have been flushed but pinned by iterators. Test Plan: Added a test in db_test Reviewers: igor, anthony, IslamAbdelRahman, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D44229
-
- 15 8月, 2015 1 次提交
-
-
由 sdong 提交于
Summary: In internal stats, remember read latency histogram, if statistics is enabled. It can be retrieved from DB::GetProperty() with "rocksdb.dbstats" property, if it is enabled. Test Plan: Manually run db_bench and prints out "rocksdb.dbstats" by hand and make sure it prints out as expected Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, anthony, yhchiang Reviewed By: yhchiang Subscribers: MarkCallaghan, leveldb, dhruba Differential Revision: https://reviews.facebook.net/D44193
-
- 22 7月, 2015 1 次提交
-
-
由 Andres Notzli 提交于
Summary: Fixes T6548822. Added a new function for estimating the size of the live data as proposed in the task. The value can be accessed through the property rocksdb.estimate-live-data-size. Test Plan: There are two unit tests in version_set_test and a simple test in db_test. make version_set_test && ./version_set_test; make db_test && ./db_test gtest_filter=GetProperty Reviewers: rven, igor, yhchiang, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D41493
-
- 18 6月, 2015 1 次提交
-
-
由 Yueh-Hsuan Chiang 提交于
Summary: Universal compaction can involves in multiple levels. However, the current implementation of bytes_readn and bytes_readnp1 (and some other stats with postfix `n` and `np1`) assumes compaction can only have two levels. This patch fixes this bug and redefines bytes_readn and bytes_readnp1: * bytes_readnp1: the number of bytes read in the compaction output level. * bytes_readn: the total number of bytes read minus bytes_readnp1 Test Plan: Add a test in compaction_job_stats_test Reviewers: igor, sdong, rven, anthony, kradhakrishnan, IslamAbdelRahman Reviewed By: IslamAbdelRahman Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D40239
-
- 29 5月, 2015 1 次提交
-
-
由 agiardullo 提交于
Summary: For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit. After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much. This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit). However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions. Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here. Reviewers: sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D37443
-
- 20 5月, 2015 1 次提交
-
-
由 Mark Callaghan 提交于
Summary: See https://gist.github.com/mdcallag/89ebb2b8cbd331854865 for the IO stats. I added "Cumulative compaction:" and "Interval compaction:" lines. The IO rates can be confusing. Rates fro per-level stats lines, Wr(MB/s) & Rd(MB/s), are computed using the duration of the compaction job. If the job reads 10MB, writes 9MB and the job (IO & merging) takes 1 second then the rates are 10MB/s for read and 9MB/s for writes. The IO rates in the Cumulative compaction line uses the total uptime. The IO rates in the Interval compaction line uses the interval uptime. So these Cumalative & Interval compaction IO rates cannot be compared to the per-level IO rates. But both forms of the rates are useful for debugging perf. Task ID: # Blame Rev: Test Plan: run db_bench Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D38667
-
- 10 4月, 2015 1 次提交
-
-
由 Yueh-Hsuan Chiang 提交于
Summary: Fix a compilation error in ROCKSDB_LITE in db/internal_stats.h Other compilation errors will be fixed in a separate diff. Test Plan: make OPT=-DROCKSDB_LITE Reviewers: sdong, igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36807
-
- 19 3月, 2015 1 次提交
-
-
由 sdong 提交于
Summary: Add a DB property for number of deletions in memtables. It can sometimes help people debug slowness because of too many deletes. Test Plan: Add test cases. Reviewers: rven, yhchiang, kradhakrishnan, igor Reviewed By: igor Subscribers: leveldb, dhruba, yoshinorim Differential Revision: https://reviews.facebook.net/D35247
-
- 15 3月, 2015 1 次提交
-
-
由 Mark Callaghan 提交于
Summary: Per-level stall times are the suggested stall time, not the actual stall time so this change stops printing them both in the per-level output lines and in the summary. Also changed output for total stall time to include units in all cases. The new output looks like: Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) Comp(cnt) Avg(sec) Stall(cnt) RecordIn RecordDrop ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 4/1 7 0.8 0.0 0.0 0.0 0.6 0.6 0.0 0.0 0.0 12.9 50 352 0.141 882 0 0 L1 5/0 9 0.9 0.0 0.0 0.0 0.0 0.0 0.6 0.0 0.0 0.0 0 0 0.000 0 0 0 L2 54/0 99 1.0 0.0 0.0 0.0 0.0 0.0 0.6 0.0 0.0 0.0 0 0 0.000 0 0 0 L3 289/0 527 0.5 0.0 0.0 0.0 0.0 0.0 0.5 0.0 0.0 0.0 0 0 0.000 0 0 0 Sum 352/1 642 0.0 0.0 0.0 0.0 0.6 0.6 1.7 1.0 0.0 12.9 50 352 0.141 882 0 0 Int 0/0 0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.0 0.0 15.5 0 3 0.118 7 0 0 Flush(GB): accumulative 0.627, interval 0.005 Stalls(count): 0 level0_slowdown, 0 level0_numfiles, 882 memtable_compaction, 0 leveln_slowdown_soft, 0 leveln_slowdown_hard Task ID: #6493861 Blame Rev: Test Plan: run db_bench, look at output Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D35085
-
- 03 3月, 2015 1 次提交
-
-
由 Igor Canadi 提交于
options.level_compaction_dynamic_level_bytes to allow RocksDB to pick size bases of levels dynamically. Summary: When having fixed max_bytes_for_level_base, the ratio of size of largest level and the second one can range from 0 to the multiplier. This makes LSM tree frequently irregular and unpredictable. It can also cause poor space amplification in some cases. In this improvement (proposed by Igor Kabiljo), we introduce a parameter option.level_compaction_use_dynamic_max_bytes. When turning it on, RocksDB is free to pick a level base in the range of (options.max_bytes_for_level_base/options.max_bytes_for_level_multiplier, options.max_bytes_for_level_base] so that real level ratios are close to options.max_bytes_for_level_multiplier. Test Plan: New unit tests and pass tests suites including valgrind. Reviewers: MarkCallaghan, rven, yhchiang, igor, ikabiljo Reviewed By: ikabiljo Subscribers: yoshinorim, ikabiljo, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D31437
-
- 20 2月, 2015 1 次提交
-
-
由 sdong 提交于
Summary: Add a DB property about live versions. It can be helpful to figure out whether there are files not live but not yet deleted, in some use cases. Test Plan: make all check Reviewers: rven, yhchiang, igor Reviewed By: igor Subscribers: yoshinorim, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D33327
-
- 10 1月, 2015 1 次提交
-
-
由 sdong 提交于
Summary: Add printing of stall time in DB Stats: Sample outputs: ** DB Stats ** Uptime(secs): 53.2 total, 1.7 interval Cumulative writes: 625940 writes, 625939 keys, 625940 batches, 1.0 writes per batch, 0.49 GB user ingest, stall micros: 50691070 Cumulative WAL: 625940 writes, 625939 syncs, 1.00 writes per sync, 0.49 GB written Interval writes: 10859 writes, 10859 keys, 10859 batches, 1.0 writes per batch, 8.7 MB user ingest, stall micros: 1692319 Interval WAL: 10859 writes, 10859 syncs, 1.00 writes per sync, 0.01 MB written Test Plan: make all check verify printing using db_bench Reviewers: igor, yhchiang, rven, MarkCallaghan Reviewed By: MarkCallaghan Subscribers: leveldb, dhruba Differential Revision: https://reviews.facebook.net/D31239
-
- 08 1月, 2015 1 次提交
-
-
由 sdong 提交于
Summary: Add comments in db.h to help users discover their options. Test Plan: Compile Reviewers: rven, yhchiang, igor Reviewed By: igor Subscribers: MarkCallaghan, yoshinorim, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D31077
-
- 06 12月, 2014 1 次提交
-
-
由 sdong 提交于
Summary: Add a counter in SnapshotList to show number of snapshots. Also a unix timestamp in every snapshot. Add two DB Properties to return number of snapshots and timestamp of the oldest one. Test Plan: Add unit test checking Reviewers: yhchiang, rven, igor Reviewed By: igor Subscribers: leveldb, dhruba, MarkCallaghan Differential Revision: https://reviews.facebook.net/D29919
-
- 04 12月, 2014 1 次提交
-
-
由 Mark Callaghan 提交于
Summary: Adds counter for bytes moved (files pushed down a level rather than compacted) to compaction IO stats as Moved(GB). From the output removed these infrequently used columns: RW-Amp, Rn(cnt), Rnp1(cnt), Wnp1(cnt), Wnew(cnt). Example old output: Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms) RecordIn RecordDrop ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 0/0 0 0.0 0.0 0.0 0.0 2130.8 2130.8 0.0 0.0 0.0 109.1 0 0 0 0 20002 25068 0.798 28.75 182059 0.16 0 0 L1 142/0 509 1.0 4618.5 2036.5 2582.0 4602.1 2020.2 4.5 2.3 88.5 88.1 24220 701246 1215528 514282 53466 4229 12.643 0.00 0 0.002032745988 300688729 Example new output: Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms) RecordIn RecordDrop -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- L0 7/0 13 1.8 0.0 0.0 0.0 0.6 0.6 0.0 0.0 0.0 14.7 44 353 0.124 0.03 626 0.05 0 0 L1 9/0 16 1.6 0.0 0.0 0.0 0.0 0.0 0.6 0.0 0.0 0.0 0 0 0.000 0.00 0 0.00 0 0 Task ID: # Blame Rev: Test Plan: make check, run db_bench --fillseq --stats_per_interval --stats_interval and look at output Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D29787
-
- 26 11月, 2014 1 次提交
-
-
由 Yueh-Hsuan Chiang 提交于
Summary: Block internal_stats in ROCKSDB_LITE. Test Plan: make OPT=-DROCKSDB_LITE shared_lib Reviewers: ljin, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D29541
-
- 06 11月, 2014 1 次提交
-
-
由 sdong 提交于
Summary: 1. fix possible overflow of the two stats by using uint64_t 2. use a similar source of data to calculate RecordDrop. Previous one is not correct. Test Plan: See outputs of db_bench settings, and the results look reasonable Reviewers: MarkCallaghan, ljin, igor Reviewed By: igor Subscribers: rven, leveldb, yhchiang, dhruba Differential Revision: https://reviews.facebook.net/D28155
-
- 01 11月, 2014 1 次提交
-
-
由 Igor Canadi 提交于
Summary: ...and fix all the errors :) Jim suggested turning on -Wshadow because it helped him fix number of critical bugs in fbcode. I think it's a good idea to be -Wshadow clean. Test Plan: compiles Reviewers: yhchiang, rven, sdong, ljin Reviewed By: ljin Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D27711
-
- 24 10月, 2014 1 次提交
-
-
由 sdong 提交于
Summary: D24513 introduced a bug that a variable is not initialized. It also causes valgrind issue. Test Plan: Run tests used to fail valgrind and make sure it passes Reviewers: yhchiang, ljin, igor Reviewed By: igor Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D25569
-
- 23 10月, 2014 1 次提交
-
-
由 sdong 提交于
Summary: It is useful to print out number of keys in DB Stats Test Plan: ./db_bench --benchmarks fillrandom --num 1000000 -threads 16 -batch_size=16 and watch the outputs in LOG files Reviewers: MarkCallaghan, ljin, yhchiang, igor Reviewed By: igor Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D24513
-
- 18 10月, 2014 1 次提交
-
-
由 Igor Canadi 提交于
Summary: Added one new counter for GetProperty Test Plan: Not sure if needs a test case. compiles Reviewers: sdong Reviewed By: sdong Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D25023
-
- 03 10月, 2014 1 次提交
-
-
由 sdong 提交于
Summary: Add two stats to compaction summary: 1. Total input records from previous level 2. Total number of records dropped after compaction Test Plan: See outputs of printing when runnning locally Reviewers: ljin, igor, MarkCallaghan Reviewed By: MarkCallaghan Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D24411
-
- 27 8月, 2014 1 次提交
-
-
由 Stanislau Hlebik 提交于
Summary: Add property 'rocksdb.is-file-deletions-enable' which equals disable_delete_obsole_file_ Test Plan: make all check Reviewers: sdong Reviewed By: sdong Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D22119
-
- 07 8月, 2014 1 次提交
-
-
由 sdong 提交于
Summary: Add a DB Property "rocksdb.estimate-table-readers-mem" to return estimated memory usage by all loaded table readers, other than allocated from block cache. Refactor the property codes to allow getting property from a version, with DB mutex not acquired. Test Plan: Add several checks of this new property in existing codes for various cases. Reviewers: yhchiang, ljin Reviewed By: ljin Subscribers: xjin, igor, leveldb Differential Revision: https://reviews.facebook.net/D20733
-
- 29 7月, 2014 3 次提交
-
-
由 sdong 提交于
Summary: We have quite some properties that are integers and we are adding more. Add a function to directly return them as an integer, instead of a string Test Plan: Add several unit test checks Reviewers: yhchiang, igor, dhruba, haobo, ljin Reviewed By: ljin Subscribers: yoshinorim, leveldb Differential Revision: https://reviews.facebook.net/D20637
-
由 sdong 提交于
Summary: Add a DB property of estimated number of live keys, by adding number of entries of all mem tables and all files, subtracted by all deletions in all files. Test Plan: Add the case in unit tests Reviewers: hobbymanyp, ljin Reviewed By: ljin Subscribers: MarkCallaghan, yoshinorim, leveldb, igor, dhruba Differential Revision: https://reviews.facebook.net/D20631
-
由 Lei Jin 提交于
Summary: It has one-to-one relationship with CFD. Take a pointer to CFD on constructor to avoid passing cfd through member functions. Test Plan: make Reviewers: sdong, yhchiang, igor Reviewed By: igor Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D20565
-
- 22 7月, 2014 1 次提交
-
-
由 Lei Jin 提交于
Summary: also make it aware of column family output from db_bench ``` ** Compaction Stats [default] ** Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 14 956 0.9 0.0 0.0 0.0 2.7 2.7 0.0 0.0 0.0 111.6 0 0 0 0 24 40 0.612 75.20 492387 0.15 L1 21 2001 2.0 5.7 2.0 3.7 5.3 1.6 5.4 2.6 71.2 65.7 31 43 55 12 82 2 41.242 43.72 41183 1.06 L2 217 18974 1.9 16.5 2.0 14.4 15.1 0.7 15.6 7.4 70.1 64.3 17 182 185 3 241 16 15.052 0.00 0 0.00 L3 1641 188245 1.8 9.1 1.1 8.0 8.5 0.5 15.4 7.4 61.3 57.2 9 75 76 1 152 9 16.887 0.00 0 0.00 L4 4447 449025 0.4 13.4 4.8 8.6 9.1 0.5 4.7 1.9 77.8 52.7 38 79 100 21 176 38 4.639 0.00 0 0.00 Sum 6340 659201 0.0 44.7 10.0 34.7 40.6 6.0 32.0 15.2 67.7 61.6 95 379 416 37 676 105 6.439 118.91 533570 0.22 Int 0 0 0.0 1.2 0.4 0.8 1.3 0.5 5.2 2.7 59.1 65.6 3 7 9 2 20 10 2.003 0.00 0 0.00 Stalls(secs): 75.197 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 43.717 leveln_slowdown Stalls(count): 492387 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 41183 leveln_slowdown ** DB Stats ** Uptime(secs): 202.1 total, 13.5 interval Cumulative writes: 6291456 writes, 6291456 batches, 1.0 writes per batch, 4.90 ingest GB Cumulative WAL: 6291456 writes, 6291456 syncs, 1.00 writes per sync, 4.90 GB written Interval writes: 1048576 writes, 1048576 batches, 1.0 writes per batch, 836.0 ingest MB Interval WAL: 1048576 writes, 1048576 syncs, 1.00 writes per sync, 0.82 MB written Test Plan: ran it Reviewers: sdong, yhchiang, igor Reviewed By: igor Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D19917
-
- 12 7月, 2014 1 次提交
-
-
由 Lei Jin 提交于
Summary: as title Test Plan: sampe output: Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(BG) Wnew(GB) RW-Amp W-Amp Rd(MB/s) Wr(MB/s) Rn(cnt) Rnp1(cnt) Wnp1(cnt) Wnew(cnt) Comp(sec) Comp(cnt) Avg(sec) Stall(sec) Stall(cnt) Avg(ms) ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ L0 15 1024 1.0 0.0 0.0 0.0 8.2 8.2 0.0 0.0 0.0 111.4 0 0 1 1 75 123 0.612 295.94 1939238 0.15 L1 23 2118 2.1 20.9 8.3 12.7 20.0 7.3 5.0 2.4 73.2 69.9 124 141 208 67 293 8 36.582 17.05 16100 1.06 L2 162 15333 1.5 47.0 7.1 40.0 42.6 2.6 12.7 6.0 67.9 61.5 62 457 482 25 709 55 12.898 0.00 0 0.00 L3 985 108065 1.1 37.8 4.0 33.9 36.9 3.0 18.8 9.3 60.1 58.5 41 338 363 25 645 31 20.812 0.00 0 0.00 L4 2788 356033 0.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0 0 0 0 0.000 0.00 0 0.00 Sum 3973 482572 0.0 105.8 19.3 86.5 107.7 21.2 11.1 5.6 62.9 64.0 227 936 1054 118 1723 217 7.938 312.99 1955338 0.16 Reviewers: sdong, yhchiang, igor Reviewed By: igor Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D19707
-
- 09 7月, 2014 1 次提交
-
-
由 Lei Jin 提交于
Summary: stall count is wrong Test Plan: make release Reviewers: sdong, yhchiang, igor Reviewed By: igor Subscribers: leveldb Differential Revision: https://reviews.facebook.net/D19539
-
- 23 4月, 2014 1 次提交
-
-
由 sdong 提交于
Summary: In this patch, two new DB properties are defined: rocksdb.num-immutable-mem-table and rocksdb.num-entries-imm-mem-tables, from where number of entries in mem tables can be exposed to users Test Plan: Cover the codes in db_test make all check Reviewers: haobo, ljin, igor Reviewed By: igor CC: nkg-, igor, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D18207
-