Summary:
It is experimental. Allow users to return from a call back function TablePropertiesCollector::NeedCompact(), based on the data in the file.
It can be used to allow users to suggest DB to clear up delete tombstones faster.

Test Plan: Add a unit test.

Reviewers: igor, yhchiang, kradhakrishnan, rven

Reviewed By: rven

Subscribers: yoshinorim, MarkCallaghan, maykov, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D39585

Summary:
Allow GetThreadList to report Flush properties, which includes:
* job id
* number of bytes that has been written since flush started.
* total size of input mem-tables

Test Plan:
./db_bench --threads=30 --num=1000000 --benchmarks=fillrandom --thread_status_per_interval=100 --value_size=1000

Sample output from db_bench which tracks same flush job

          ThreadID ThreadType       cfName            Operation   ElapsedTime                                         Stage        State OperationProperties
   140213879898240   High Pri      default                Flush       5789 us                    FlushJob::WriteLevel0Table              BytesMemtables 4112835 | BytesWritten 577104 | JobID 8 |

          ThreadID ThreadType       cfName            Operation   ElapsedTime                                         Stage        State OperationProperties
   140213879898240   High Pri      default                Flush     30.634 ms                    FlushJob::WriteLevel0Table              BytesMemtables 4112835 | BytesWritten 1734865 | JobID 8 |

Reviewers: rven, igor, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D38505

Summary:
Example output:

    {"time_micros": 1431463794310521, "job": 353, "event": "table_file_creation", "file_number": 387, "file_size": 86937, "table_info": {"data_size": "81801", "index_size": "9751", "filter_size": "0", "raw_key_size": "23448", "raw_average_key_size": "24.000000", "raw_value_size": "990571", "raw_average_value_size": "1013.890481", "num_data_blocks": "245", "num_entries": "977", "filter_policy_name": "", "kDeletedKeys": "0"}}

Also fixed a bug where BuildTable() in recovery was passing Env::IOHigh argument into paranoid_checks_file parameter.

Test Plan: make check + check out the output in the log

Reviewers: sdong, rven, yhchiang

Reviewed By: yhchiang

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D38343

Summary: To further distinguish the corruption cases were caused by storage media or in memory states when writing it, add a paranoid check after writing the file to iterate all the rows.

Test Plan: Add a new unit test for it

Reviewers: rven, igor

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D37335

Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.

Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties

Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.

Reviewers: yhchiang, igor.sugak, rven, igor

Reviewed By: rven, igor

Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D35373

Summary:
    Summary:
    Added a new option to ColumnFamllyOptions  - optimize_filters_for_hits. This option can be used in the case where most
    accesses to the store are key hits and we dont need to optimize performance for key misses.
    This is useful when you have a very large database and most of your lookups succeed.  The option allows the store to
     not store and use filters in the last level (the largest level which contains data). These filters can take a large amount of
     space for large databases (in memory and on-disk). For the last level, these filters are only useful for key misses and not
     for key hits. If we are not optimizing for key misses, we can choose to not store these filters for that level.

    This option is only provided for BlockBasedTable. We skip the filters when we are compacting

Test Plan:
1. Modified db_test toalso run tests with an additonal option (skip_filters_on_last_level)
 2. Added another unit test to db_test which specifically tests that filters are being skipped

Reviewers: rven, igor, sdong

Reviewed By: sdong

Subscribers: lgalanis, yoshinorim, MarkCallaghan, rven, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D33717

Summary:
...and fix all the errors :)

Jim suggested turning on -Wshadow because it helped him fix number of critical bugs in fbcode. I think it's a good idea to be -Wshadow clean.

Test Plan: compiles

Reviewers: yhchiang, rven, sdong, ljin

Reviewed By: ljin

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D27711

Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.

ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.

I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.

Test Plan: make all check

Reviewers: yhchiang, igor, sdong

Reviewed By: sdong

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D22545

Summary:
Previously, builder.cc has a check for merge operator which prevents
RocksDB from crash when reopening a DB w/o properly specifying the merge
operator.  However, currently we observed a memory leak on failing in
RocksDB recovery.  This diff removes such check and let it crash instead of
causing memory leak for now before we have identified the real cause of
the memory leak.

Test Plan: make all check

Reviewers: sdong

Subscribers: ljin, igor

Differential Revision: https://reviews.facebook.net/D20913

Summary:
Fixed the crash when merge_operator is not properly set after reopen
and added two test cases for this.

Test Plan:
make merge_test
./merge_test

Reviewers: igor, ljin, sdong

Reviewed By: sdong

Subscribers: benj, mvikjord, leveldb

Differential Revision: https://reviews.facebook.net/D20793

Summary:
Add option and plugin rate limiter for PosixWritableFile. The rate
limiter only applies to flush and compaction. WAL and MANIFEST are
excluded from this enforcement.

Test Plan: db_test

Reviewers: igor, yhchiang, sdong

Reviewed By: sdong

Subscribers: leveldb

Differential Revision: https://reviews.facebook.net/D19425

Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.

Test Plan: make all check

Reviewers: igor, haobo, ljin, yhchiang

Reviewed By: yhchiang

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D18921

Summary:
We added multiple fields to FileMetaData recently and are planning to add more.
This refactoring separate the minimum information for accessing the file. This object is copyable (FileMetaData is not copyable since the ref counter). I hope this refactoring can enable further improvements:

(1) use it to design a more efficient data structure to speed up read queries.
(2) in the future, when we add information of storage level, we can easily do the encoding, instead of enlarge this structure, which might expand memory work set for file meta data.

The definition is same as current EncodedFileMetaData used in two level iterator, so now the logic in two level iterator is easier to understand.

Test Plan: make all check

Reviewers: haobo, igor, ljin

Reviewed By: ljin

Subscribers: leveldb, dhruba, yhchiang

Differential Revision: https://reviews.facebook.net/D18933

Summary:
* PartialMerge api now takes a list of operands instead of two operands.
* Add min_pertial_merge_operands to Options, indicating the minimum
  number of operands to trigger partial merge.
* This diff is based on Schalk's previous diff (D14601), but it also
  includes necessary changes such as updating the pure C api for
  partial merge.

Test Plan:
* make check all
* develop tests for cases where partial merge takes more than two
  operands.

TODOs (from Schalk):
* Add test with min_partial_merge_operands > 2.
* Perform benchmarks to measure the performance improvements (can probably
  use results of task #2837810.)
* Add description of problem to doc/index.html.
* Change wiki pages to reflect the interface changes.

Reviewers: haobo, igor, vamsi

Reviewed By: haobo

CC: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D16815

Summary:
Previous I am too ambitious to hide every detail about table factory
to internal api. However, we cannot pass the compilatoin for external
users since we use table factory as the shared_ptr, which requires
the definition of table factory's destructor.

Test Plan: make check;

Reviewers: sdong, haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D15861

Summary: In PlainTable, use one single byte to represent 8 bytes of internal bytes, if seqID = 0 and it is value type (which should be common for bottom most files). It is to save 7 bytes for uncompressed cases.

Test Plan: make all check

Reviewers: haobo, dhruba, kailiu

Reviewed By: haobo

CC: igor, leveldb

Differential Revision: https://reviews.facebook.net/D15489

Summary:
Addressed all the issues in https://reviews.facebook.net/D15447.
Now most table-related modules are hidden from user land.

Test Plan: make check

Reviewers: sdong, haobo, dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D15525

[Performance Branch] If options.max_open_files set to be -1, cache table readers in FileMetadata for Get() and NewIterator()

Summary:
In some use cases, table readers for all live files should always be cached. In that case, there will be an opportunity to avoid the table cache look-up while Get() and NewIterator().

We define options.max_open_files = -1 to be the mode that table readers for live files will always be kept. In that mode, table readers are cached in FileMetaData (with a reference count hold in table cache). So that when executing table_cache.Get() and table_cache.newInterator(), LRU cache checking can be by-passed, to reduce latency.

Test Plan: add a test case in db_test

Reviewers: haobo, kailiu

Reviewed By: haobo

CC: dhruba, igor, leveldb

Differential Revision: https://reviews.facebook.net/D15039

Summary:
Code was always compressing L0 files written by a memtable flush
when compression was enabled. Now this is done when
min_level_to_compress=0 for leveled compaction and when
universal_compaction_size_percent=-1 for universal compaction.

Task ID: #3416472

Blame Rev:

Test Plan:
ran db_bench with compression options

Revert Plan:

Database Impact:

Memcache Impact:

Other Notes:

EImportant:

- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -

Reviewers: dhruba, igor, sdong

Reviewed By: dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D14757

Summary: liveness of the statistics object is already ensured by the shared pointer in DB options. There's no reason to pass again shared pointer among internal functions. Raw pointer is sufficient and efficient.

Test Plan: make check

Reviewers: dhruba, MarkCallaghan, igor

Reviewed By: dhruba

CC: leveldb, reconnect.grayhat

Differential Revision: https://reviews.facebook.net/D14289

Summary:
This patch is to address @haobo's comments on D13521:
1. rename Table to be TableReader and make its factory function to be GetTableReader
2. move the compression type selection logic out of TableBuilder but to compaction logic
3. more accurate comments
4. Move stat name constants into BlockBasedTable implementation.
5. remove some uncleaned codes in simple_table_db_test

Test Plan: pass test suites.

Reviewers: haobo, dhruba, kailiu

Reviewed By: haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D13785

Summary: This patch makes Table and TableBuilder a abstract class and make all the implementation of the current table into BlockedBasedTable and BlockedBasedTable Builder.

Test Plan: Make db_test.cc to work with block based table. Add a new test simple_table_db_test.cc where a different simple table format is implemented.

Reviewers: dhruba, haobo, kailiu, emayanke, vamsi

Reviewed By: dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D13521

Summary:
This patch adds a option for universal compaction to allow us to only compress output files if the files compacted previously did not yet reach a specified ratio, to save CPU costs in some cases.

Compression is always skipped for flushing. This is because the size information is not easy to evaluate for flushing case. We can improve it later.

Test Plan:
add test
DBTest.UniversalCompactionCompressRatio1 and DBTest.UniversalCompactionCompressRatio12

Reviewers: dhruba, haobo

Reviewed By: dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D13467

Summary:
Add appropriate LICENSE and Copyright message.

Test Plan:
make check

Reviewers:

CC:

Task ID: #

Blame Rev:

Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.

Test Plan: compile rocksdb

Reviewers: emayanke

Reviewed By: emayanke

CC: leveldb

Differential Revision: https://reviews.facebook.net/D13287

Summary: Replace include/leveldb with include/rocksdb.

Test Plan:
make clean; make check
make clean; make release

Differential Revision: https://reviews.facebook.net/D12489

Test Plan:
- make all check;
- make release;
- make stringappend_test; ./stringappend_test

Reviewers: haobo, emayanke

Reviewed By: haobo

CC: leveldb, kailiu

Differential Revision: https://reviews.facebook.net/D12381

Summary:
Here are the major changes to the Merge Interface. It has been expanded
to handle cases where the MergeOperator is not associative. It does so by stacking
up merge operations while scanning through the key history (i.e.: during Get() or
Compaction), until a valid Put/Delete/end-of-history is encountered; it then
applies all of the merge operations in the correct sequence starting with the
base/sentinel value.

I have also introduced an "AssociativeMerge" function which allows the user to
take advantage of associative merge operations (such as in the case of counters).
The implementation will always attempt to merge the operations/operands themselves
together when they are encountered, and will resort to the "stacking" method if
and only if the "associative-merge" fails.

This implementation is conjectured to allow MergeOperator to handle the general
case, while still providing the user with the ability to take advantage of certain
efficiencies in their own merge-operator / data-structure.

NOTE: This is a preliminary diff. This must still go through a lot of review,
revision, and testing. Feedback welcome!

Test Plan:
  -This is a preliminary diff. I have only just begun testing/debugging it.
  -I will be testing this with the existing MergeOperator use-cases and unit-tests
(counters, string-append, and redis-lists)
  -I will be "desk-checking" and walking through the code with the help gdb.
  -I will find a way of stress-testing the new interface / implementation using
db_bench, db_test, merge_test, and/or db_stress.
  -I will ensure that my tests cover all cases: Get-Memtable,
Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0,
Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found,
end-of-history, end-of-file, etc.
  -A lot of feedback from the reviewers.

Reviewers: haobo, dhruba, zshao, emayanke

Reviewed By: haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D11499

Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions.  Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().

All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted.  Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.

The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.

The above logic should reduce write amplification to a
large extent... will publish numbers shortly.

Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).

Differential Revision: https://reviews.facebook.net/D11289

Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions.  Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().

All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted.  Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.

The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.

The above logic should reduce write amplification to a
large extent... will publish numbers shortly.

Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).

Differential Revision: https://reviews.facebook.net/D11289

Summary:
This diff simplifies EnvOptions by treating it as POD, similar to Options.
- virtual functions are removed and member fields are accessed directly.
- StorageOptions is removed.
- Options.allow_readahead and Options.allow_readahead_compactions are deprecated.
- Unused global variables are removed: useOsBuffer, useFsReadAhead, useMmapRead, useMmapWrite

Test Plan: make check; db_stress

Reviewers: dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D11175

Summary: Add stop watches around all sync calls.

Test Plan: db_bench check if respective histograms are printed

Reviewers: haobo, dhruba

Reviewed By: haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D11073

Summary:
This diff introduces a new Merge operation into rocksdb.
The purpose of this review is mostly getting feedback from the team (everyone please) on the design.

Please focus on the four files under include/leveldb/, as they spell the client visible interface change.
include/leveldb/db.h
include/leveldb/merge_operator.h
include/leveldb/options.h
include/leveldb/write_batch.h

Please go over local/my_test.cc carefully, as it is a concerete use case.

Please also review the impelmentation files to see if the straw man implementation makes sense.

Note that, the diff does pass all make check and truly supports forward iterator over db and a version
of Get that's based on iterator.

Future work:
- Integration with compaction
- A raw Get implementation

I am working on a wiki that explains the design and implementation choices, but coding comes
just naturally and I think it might be a good idea to share the code earlier. The code is
heavily commented.

Test Plan: run all local tests

Reviewers: dhruba, heyongqiang

Reviewed By: dhruba

CC: leveldb, zshao, sheki, emayanke, MarkCallaghan

Differential Revision: https://reviews.facebook.net/D9651

Summary:
This patch allows an application to specify whether to use bufferedio,
reads-via-mmaps and writes-via-mmaps per database. Earlier, there
was a global static variable that was used to configure this functionality.

The default setting remains the same (and is backward compatible):
 1. use bufferedio
 2. do not use mmaps for reads
 3. use mmap for writes
 4. use readaheads for reads needed for compaction

I also added a parameter to db_bench to be able to explicitly specify
whether to do readaheads for compactions or not.

Test Plan: make check

Reviewers: sheki, heyongqiang, MarkCallaghan

Reviewed By: sheki

CC: leveldb

Differential Revision: https://reviews.facebook.net/D9429

Summary:
Rocks accumulates recent writes and deletes in the in-memory memtable.
When the memtable is full, it writes the contents on the memtable to
a file in L0.

This patch removes redundant records at the time of the flush. If there
are multiple versions of the same key in the memtable, then only the
most recent one is dumped into the output file. The purging of
redundant records occur only if the most recent snapshot is earlier
than the earliest record in the memtable.

Should we switch on this feature by default or should we keep this feature
turned off in the default settings?

Test Plan: Added test case to db_test.cc

Reviewers: sheki, vamsi, emayanke, heyongqiang

Reviewed By: sheki

CC: leveldb

Differential Revision: https://reviews.facebook.net/D8991

Summary:
Replace manual memory management with std::unique_ptr in a
number of places; not exhaustive, but this fixes a few leaks with file
handles as well as clarifies semantics of the ownership of file handles
with log classes.

Test Plan: db_stress, make check

Reviewers: dhruba

Reviewed By: dhruba

CC: zshao, leveldb, heyongqiang

Differential Revision: https://reviews.facebook.net/D8043

Summary:
The leveldb API is enhanced to support different compression algorithms at
different levels.

This adds the option min_level_to_compress to db_bench that specifies
the minimum level for which compression should be done when
compression is enabled. This can be used to disable compression for levels
0 and 1 which are likely to suffer from stalls because of the CPU load
for memtable flushes and (L0,L1) compaction.  Level 0 is special as it
gets frequent memtable flushes. Level 1 is special as it frequently
gets all:all file compactions between it and level 0. But all other levels
could be the same. For any level N where N > 1, the rate of sequential
IO for that level should be the same. The last level is the
exception because it might not be full and because files from it are
not read to compact with the next larger level.

The same amount of time will be spent doing compaction at any
level N excluding N=0, 1 or the last level. By this standard all
of those levels should use the same compression. The difference is that
the loss (using more disk space) from a faster compression algorithm
is less significant for N=2 than for N=3. So we might be willing to
trade disk space for faster write rates with no compression
for L0 and L1, snappy for L2, zlib for L3. Using a faster compression
algorithm for the mid levels also allows us to reclaim some cpu
without trading off much loss in disk space overhead.

Also note that little is to be gained by compressing levels 0 and 1. For
a 4-level tree they account for 10% of the data. For a 5-level tree they
account for 1% of the data.

With compression enabled:
* memtable flush rate is ~18MB/second
* (L0,L1) compaction rate is ~30MB/second

With compression enabled but min_level_to_compress=2
* memtable flush rate is ~320MB/second
* (L0,L1) compaction rate is ~560MB/second

This practicaly takes the same code from https://reviews.facebook.net/D6225
but makes the leveldb api more general purpose with a few additional
lines of code.

Test Plan: make check

Differential Revision: https://reviews.facebook.net/D6261

Summary:
Introduce a new method Env->Fsync() that issues fsync (instead of fdatasync).
This is needed for data durability when running on ext3 filesystems.
Added options to the benchmark db_bench to generate performance numbers
with either fsync or fdatasync enabled.

Cleaned up Makefile to build leveldb_shell only when building the thrift
leveldb server.

Test Plan: build and run benchmark

Reviewers: heyongqiang

Reviewed By: heyongqiang

Differential Revision: https://reviews.facebook.net/D4911

Summary: as subject

Test Plan: use db_bench

Reviewers: dhruba

Differential Revision: https://reviews.facebook.net/D4671

- Replace raw slice comparison with a call to user comparator.
  Added test for custom comparators.

- Fix end of namespace comments.

- Fixed bug in picking inputs for a level-0 compaction.

  When finding overlapping files, the covered range may expand
  as files are added to the input set.  We now correctly expand
  the range when this happens instead of continuing to use the
  old range.  For example, suppose L0 contains files with the
  following ranges:

      F1: a .. d
      F2:    c .. g
      F3:       f .. j

  and the initial compaction target is F3.  We used to search
  for range f..j which yielded {F2,F3}.  However we now expand
  the range as soon as another file is added.  In this case,
  when F2 is added, we expand the range to c..j and restart the
  search.  That picks up file F1 as well.

  This change fixes a bug related to deleted keys showing up
  incorrectly after a compaction as described in Issue 44.

(Sync with upstream @25072954)