- 09 9月, 2022 4 次提交
-
-
由 Andrew Kryczka 提交于
Summary: Expanded `all_params` to include all parameters crash test may set. Previously, `atomic_flush` was not included in `all_params` and thus was not visible to `finalize_and_sanitize()`. The consequence was manual crash test runs could provide unsafe combinations of parameters to `db_stress`. For example, running `db_crashtest.py` with `-atomic_flush=0` could cause `db_stress` to run with `-atomic_flush=0 -disable_wal=1`, which is known to produce inconsistencies across column families. While expanding `all_params`, I found we cannot have an entry in it for both `db_stress` and `db_crashtest.py`. So I renamed `enable_tiered_storage` to `test_tiered_storage` for `db_crashtest.py`, which appears more conventional anyways. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10654 Reviewed By: hx235 Differential Revision: D39369349 Pulled By: ajkr fbshipit-source-id: 31d9010c760c868b20d5e9bd78ba75c8ff3ce348
-
由 gitbw95 提交于
Summary: Add PerfContext counters for CompressedSecondaryCache. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10650 Test Plan: Unit Tests. Reviewed By: anand1976 Differential Revision: D39354712 Pulled By: gitbw95 fbshipit-source-id: 1b90d3df99d08ddecd351edfd48d1e3723fdbc15
-
由 Yanqin Jin 提交于
Summary: With user-defined timestamp, checking overlapping should exclude timestamp part from key. This has already been done for range checking for files in sstableKeyCompare(), but not yet done when checking with concurrent compactions. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10615 Test Plan: (Will add more tests) make check (Repro seems easier with this commit sha: git checkout 78bbdef5) rm -rf /dev/shm/rocksdb/* && mkdir /dev/shm/rocksdb/rocksdb_crashtest_expected && ./db_stress --allow_data_in_errors=True --clear_column_family_one_in=0 --continuous_verification_interval=0 --data_block_index_type=1 --db=/dev/shm/rocksdb//rocksdb_crashtest_blackbox --delpercent=5 --delrangepercent=0 --expected_values_dir=/dev/shm/rocksdb//rocksdb_crashtest_expected --iterpercent=0 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=25000000 --max_write_batch_group_size_bytes=1048576 --nooverwritepercent=1 --ops_per_thread=1000000 --paranoid_file_checks=1 --partition_filters=0 --prefix_size=8 --prefixpercent=5 --readpercent=30 --reopen=0 --snapshot_hold_ops=100000 --subcompactions=1 --compaction_pri=3 --target_file_size_base=65536 --target_file_size_multiplier=2 --test_batches_snapshots=0 --test_cf_consistency=0 --use_multiget=1 --user_timestamp_size=8 --value_size_mult=32 --verify_checksum=1 --write_buffer_size=65536 --writepercent=60 -disable_wal=1 Reviewed By: akankshamahajan15 Differential Revision: D39146797 Pulled By: riversand963 fbshipit-source-id: 7fca800026ca6219220100b8b6cf84d907828163
-
由 Levi Tamasi 提交于
Summary: Historically, `BlobFileReader` has returned the blob(s) read from the file in the `PinnableSlice` provided by the client. This interface was preserved when caching was implemented for blobs, which meant that the blob data was copied multiple times when caching was in use: first, into the client-provided `PinnableSlice` (by `BlobFileReader::SaveValue`), and then, into the object stored in the cache (by `BlobSource::PutBlobIntoCache`). The patch eliminates these copies and the related allocations by changing `BlobFileReader` so it returns its results in the form of heap-allocated `BlobContents` objects that can be directly inserted into the cache. The allocations backing these `BlobContents` objects are made using the blob cache's allocator if the blobs are to be inserted into the cache (i.e. if a cache is configured and the `fill_cache` read option is set). Note: this PR focuses on the common case when blobs are compressed; some further small optimizations are possible for uncompressed blobs. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10647 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D39335185 Pulled By: ltamasi fbshipit-source-id: 464503d60a5520d654c8273ffb8efd5d1bcd7b36
-
- 08 9月, 2022 2 次提交
-
-
由 Peter Dillinger 提交于
Summary: Although we've been tracking SST unique IDs in the DB manifest unconditionally, checking has been opt-in and with an extra pass at DB::Open time. This changes the behavior of `verify_sst_unique_id_in_manifest` to check unique ID against manifest every time an SST file is opened through table cache (normal DB operations), replacing the explicit pass over files at DB::Open time. This change also enables the option by default and removes the "EXPERIMENTAL" designation. One possible criticism is that the option no longer ensures the integrity of a DB at Open time. This is far from an all-or-nothing issue. Verifying the IDs of all SST files hardly ensures all the data in the DB is readable. (VerifyChecksum is supposed to do that.) Also, with max_open_files=-1 (default, extremely common), all SST files are opened at DB::Open time anyway. Implementation details: * `VerifySstUniqueIdInManifest()` functions are the extra/explicit pass that is now removed. * Unit tests that manipulate/corrupt table properties have to opt out of this check, because that corrupts the "actual" unique id. (And even for testing we don't currently have a mechanism to set "no unique id" in the in-memory file metadata for new files.) * A lot of other unit test churn relates to (a) default checking on, and (b) checking on SST open even without DB::Open (e.g. on flush) * Use `FileMetaData` for more `TableCache` operations (in place of `FileDescriptor`) so that we have access to the unique_id whenever we might need to open an SST file. **There is the possibility of performance impact because we can no longer use the more localized `fd` part of an `FdWithKeyRange` but instead follow the `file_metadata` pointer. However, this change (possible regression) is only done for `GetMemoryUsageByTableReaders`.** * Removed a completely unnecessary constructor overload of `TableReaderOptions` Possible follow-up: * Verification only happens when opening through table cache. Are there more places where this should happen? * Improve error message when there is a file size mismatch vs. manifest (FIXME added in the appropriate place). * I'm not sure there's a justification for `FileDescriptor` to be distinct from `FileMetaData`. * I'm skeptical that `FdWithKeyRange` really still makes sense for optimizing some data locality by duplicating some data in memory, but I could be wrong. * An unnecessary overload of NewTableReader was recently added, in the public API nonetheless (though unusable there). It should be cleaned up to put most things under `TableReaderOptions`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10532 Test Plan: updated unit tests Performance test showing no significant difference (just noise I think): `./db_bench -benchmarks=readwhilewriting[-X10] -num=3000000 -disable_wal=1 -bloom_bits=8 -write_buffer_size=1000000 -target_file_size_base=1000000` Before: readwhilewriting [AVG 10 runs] : 68702 (± 6932) ops/sec After: readwhilewriting [AVG 10 runs] : 68239 (± 7198) ops/sec Reviewed By: jay-zhuang Differential Revision: D38765551 Pulled By: pdillinger fbshipit-source-id: a827a708155f12344ab2a5c16e7701c7636da4c2
-
由 Bo Wang 提交于
Summary: **Summary:** When a block is firstly `Lookup` from the secondary cache, we just insert a dummy block in the primary cache (charging the actual size of the block) and don’t erase the block from the secondary cache. A standalone handle is returned from `Lookup`. Only if the block is hit again, we erase it from the secondary cache and add it into the primary cache. When a block is firstly evicted from the primary cache to the secondary cache, we just insert a dummy block (size 0) in the secondary cache. When the block is evicted again, it is treated as a hot block and is inserted into the secondary cache. **Implementation Details** Add a new state of LRUHandle: The handle is never inserted into the LRUCache (both hash table and LRU list) and it doesn't experience the above three states. The entry can be freed when refs becomes 0. (refs >= 1 && in_cache == false && IS_STANDALONE == true) The behaviors of `LRUCacheShard::Lookup()` are updated if the secondary_cache is CompressedSecondaryCache: 1. If a handle is found in primary cache: 1.1. If the handle's value is not nullptr, it is returned immediately. 1.2. If the handle's value is nullptr, this means the handle is a dummy one. For a dummy handle, if it was retrieved from secondary cache, it may still exist in secondary cache. - 1.2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr. - 1.2.2. If the handle from secondary cache is valid, erase it from the secondary cache and add it into the primary cache. 2. If a handle is not found in primary cache: 2.1. If no valid handle can be `Lookup` from secondary cache, return nullptr. 2.2. If the handle from secondary cache is valid, insert a dummy block in the primary cache (charging the actual size of the block) and return a standalone handle. The behaviors of `LRUCacheShard::Promote()` are updated as follows: 1. If `e->sec_handle` has value, one of the following steps can happen: 1.1. Insert a dummy handle and return a standalone handle to caller when `secondary_cache_` is `CompressedSecondaryCache` and e is a standalone handle. 1.2. Insert the item into the primary cache and return the handle to caller. 1.3. Exception handling. 3. If `e->sec_handle` has no value, mark the item as not in cache and charge the cache as its only metadata that'll shortly be released. The behavior of `CompressedSecondaryCache::Insert()` is updated: 1. If a block is evicted from the primary cache for the first time, a dummy item is inserted. 4. If a dummy item is found for a block, the block is inserted into the secondary cache. The behavior of `CompressedSecondaryCache:::Lookup()` is updated: 1. If a handle is not found or it is a dummy item, a nullptr is returned. 2. If `erase_handle` is true, the handle is erased. The behaviors of `LRUCacheShard::Release()` are adjusted for the standalone handles. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10527 Test Plan: 1. stress tests. 5. unit tests. 6. CPU profiling for db_bench. Reviewed By: siying Differential Revision: D38747613 Pulled By: gitbw95 fbshipit-source-id: 74a1eba7e1957c9affb2bd2ae3e0194584fa6eca
-
- 07 9月, 2022 3 次提交
-
-
由 Levi Tamasi 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10628 Test Plan: `make check` Reviewed By: akankshamahajan15 Differential Revision: D39228165 Pulled By: ltamasi fbshipit-source-id: 591fdff08db400b170b26f0165551f86d33c1dbf
-
由 Andrew Kryczka 提交于
Summary: Example failure: ``` db/blob/db_blob_basic_test.cc:226: Failure Expected equality of these values: i Which is: 1 num_blobs Which is: 5 ``` I can't repro locally, but it looks like the 2KB cache is too small to guarantee no eviction happens between loading all the data into cache and reading from `kBlockCacheTier`. This 2KB setting appears to have come from a test where the cached entries are pinned, where it makes sense to have a small setting. However, such a small setting makes less sense when the blocks are evictable but must remain cached per the test's expectation. This PR increases the capacity setting to 2MB for those cases. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10636 Reviewed By: cbi42 Differential Revision: D39250976 Pulled By: ajkr fbshipit-source-id: 769309f9a19cfac20b67b927805c8df5c1d2d1f5
-
由 Andrew Kryczka 提交于
Summary: Example flake: https://app.circleci.com/pipelines/github/facebook/rocksdb/17660/workflows/7a891875-f07b-4a67-b204-eaa7ca9f9aa2/jobs/467496 The test could get stuck in out-of-space due to a callback executing `SetFilesystemActive(false /* active */)` after the test executed `SetFilesystemActive(true /* active */)`. This could happen because background info logging went through the SyncPoint callback "WritableFileWriter::Append:BeforePrepareWrite", probably unintentionally. The solution of this PR is to call `ClearAllCallBacks()` to wait for any such pending callbacks to drain before calling `SetFilesystemActive(true /* active */)` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10642 Reviewed By: cbi42 Differential Revision: D39265381 Pulled By: ajkr fbshipit-source-id: 9a2f4916ab19726c8fb4b3a3b590b1b9ed93de1b
-
- 06 9月, 2022 1 次提交
-
-
由 Andrew Kryczka 提交于
Summary: Example flake where CircleCI reports memory at 99% and process gets killed with signal 9 (likely OOM): https://app.circleci.com/pipelines/github/facebook/rocksdb/18085/workflows/bdadbfe6-c40f-4ccb-a5db-fc8c4036f20a/jobs/475628 The previous settings of max_key=25000000, column_families=10, and log2_keys_per_lock=2 resulted in 3GB memory usage just for SharedState. The locks alone consume at least (25000000 keys per CF) * (10 CFs) / (2^2 keys per lock) * (40 bytes per lock) = 2.3GB. This PR reduces it 10x by reducing max_key by that factor. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10639 Reviewed By: cbi42 Differential Revision: D39263804 Pulled By: ajkr fbshipit-source-id: 9b5565bbafcb21a2f5b487c8364808dea2f0bc0c
-
- 05 9月, 2022 2 次提交
-
-
由 Andrew Kryczka 提交于
Summary: Example valgrind flake: https://app.circleci.com/pipelines/github/facebook/rocksdb/18073/workflows/3794e569-45cb-4621-a2b4-df1dcdf5cb19/jobs/475569 ``` util/rate_limiter_test.cc:358 Expected equality of these values: samples_at_minimum Which is: 9 samples Which is: 10 ``` Some other runs of `RateLimiterTest.Rate` already skip this check due to its reliance on a minimum execution speed. We know valgrind slows execution a lot so can disable the check in that case. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10637 Reviewed By: cbi42 Differential Revision: D39251350 Pulled By: ajkr fbshipit-source-id: 41ae1ea4cd91992ea57df902f9f7fd6d182a5932
-
由 Andrew Kryczka 提交于
Summary: Previously, automatic compaction could be triggered prior to the test invoking CompactRange(). It could lead to the following flaky failure: ``` /root/project/db/db_block_cache_test.cc:753: Failure Expected equality of these values: 1 + kNumBlocks Which is: 11 options.statistics->getTickerCount(BLOCK_CACHE_INDEX_ADD) Which is: 10 ``` A sequence leading to this failure was: * Automatic compaction * files [1] [2] trivially moved * files [3] [4] [5] [6] trivially moved * CompactRange() * files [7] [8] [9] trivially moved * file [10] trivially moved In such a case, the index/filter block adds that the test expected did not happen since there were no new files. This PR just tweaks settings to ensure the `CompactRange()` produces one new file. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10635 Reviewed By: cbi42 Differential Revision: D39250869 Pulled By: ajkr fbshipit-source-id: a3c94c49069e28c49c40b4b80dae0059739d19fd
-
- 03 9月, 2022 1 次提交
-
-
由 Changyu Bi 提交于
Summary: Delete range logic is moved from `DBIter` to `MergingIterator`, and `MergingIterator` will seek to the end of a range deletion if possible instead of scanning through each key and check with `RangeDelAggregator`. With the invariant that a key in level L (consider memtable as the first level, each immutable and L0 as a separate level) has a larger sequence number than all keys in any level >L, a range tombstone `[start, end)` from level L covers all keys in its range in any level >L. This property motivates optimizations in iterator: - in `Seek(target)`, if level L has a range tombstone `[start, end)` that covers `target.UserKey`, then for all levels > L, we can do Seek() on `end` instead of `target` to skip some range tombstone covered keys. - in `Next()/Prev()`, if the current key is covered by a range tombstone `[start, end)` from level L, we can do `Seek` to `end` for all levels > L. This PR implements the above optimizations in `MergingIterator`. As all range tombstone covered keys are now skipped in `MergingIterator`, the range tombstone logic is removed from `DBIter`. The idea in this PR is similar to https://github.com/facebook/rocksdb/issues/7317, but this PR leaves `InternalIterator` interface mostly unchanged. **Credit**: the cascading seek optimization and the sentinel key (discussed below) are inspired by [Pebble](https://github.com/cockroachdb/pebble/blob/master/merging_iter.go) and suggested by ajkr in https://github.com/facebook/rocksdb/issues/7317. The two optimizations are mostly implemented in `SeekImpl()/SeekForPrevImpl()` and `IsNextDeleted()/IsPrevDeleted()` in `merging_iterator.cc`. See comments for each method for more detail. One notable change is that the minHeap/maxHeap used by `MergingIterator` now contains range tombstone end keys besides point key iterators. This helps to reduce the number of key comparisons. For example, for a range tombstone `[start, end)`, a `start` and an `end` `HeapItem` are inserted into the heap. When a `HeapItem` for range tombstone start key is popped from the minHeap, we know this range tombstone becomes "active" in the sense that, before the range tombstone's end key is popped from the minHeap, all the keys popped from this heap is covered by the range tombstone's internal key range `[start, end)`. Another major change, *delete range sentinel key*, is made to `LevelIterator`. Before this PR, when all point keys in an SST file are iterated through in `MergingIterator`, a level iterator would advance to the next SST file in its level. In the case when an SST file has a range tombstone that covers keys beyond the SST file's last point key, advancing to the next SST file would lose this range tombstone. Consequently, `MergingIterator` could return keys that should have been deleted by some range tombstone. We prevent this by pretending that file boundaries in each SST file are sentinel keys. A `LevelIterator` now only advance the file iterator once the sentinel key is processed. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10449 Test Plan: - Added many unit tests in db_range_del_test - Stress test: `./db_stress --readpercent=5 --prefixpercent=19 --writepercent=20 -delpercent=10 --iterpercent=44 --delrangepercent=2` - Additional iterator stress test is added to verify against iterators against expected state: https://github.com/facebook/rocksdb/issues/10538. This is based on ajkr's previous attempt https://github.com/facebook/rocksdb/pull/5506#issuecomment-506021913. ``` python3 ./tools/db_crashtest.py blackbox --simple --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --compression_type=none --max_background_compactions=8 --value_size_mult=33 --max_key=5000000 --interval=10 --duration=7200 --delrangepercent=3 --delpercent=9 --iterpercent=25 --writepercent=60 --readpercent=3 --prefixpercent=0 --num_iterations=1000 --range_deletion_width=100 --verify_iterator_with_expected_state_one_in=1 ``` - Performance benchmark: I used a similar setup as in the blog [post](http://rocksdb.org/blog/2018/11/21/delete-range.html) that introduced DeleteRange, "a database with 5 million data keys, and 10000 range tombstones (ignoring those dropped during compaction) that were written in regular intervals after 4.5 million data keys were written". As expected, the performance with this PR depends on the range tombstone width. ``` # Setup: TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=fillrandom --writes=4500000 --num=5000000 TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=overwrite --writes=500000 --num=5000000 --use_existing_db=true --writes_per_range_tombstone=50 # Scan entire DB TEST_TMPDIR=/dev/shm ./db_bench_main --benchmarks=readseq[-X5] --use_existing_db=true --num=5000000 --disable_auto_compactions=true # Short range scan (10 Next()) TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=100000 --seek_nexts=10 --disable_auto_compactions=true # Long range scan(1000 Next()) TEST_TMPDIR=/dev/shm/width-100/ ./db_bench_main --benchmarks=seekrandom[-X5] --use_existing_db=true --num=500000 --reads=2500 --seek_nexts=1000 --disable_auto_compactions=true ``` Avg over of 10 runs (some slower tests had fews runs): For the first column (tombstone), 0 means no range tombstone, 100-10000 means width of the 10k range tombstones, and 1 means there is a single range tombstone in the entire DB (width is 1000). The 1 tombstone case is to test regression when there's very few range tombstones in the DB, as no range tombstone is likely to take a different code path than with range tombstones. - Scan entire DB | tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% | | ------------- | ------------- | ------------- | ------------- | | 0 range tombstone |2525600 (± 43564) |2486917 (± 33698) |-1.53% | | 100 |1853835 (± 24736) |2073884 (± 32176) |+11.87% | | 1000 |422415 (± 7466) |1115801 (± 22781) |+164.15% | | 10000 |22384 (± 227) |227919 (± 6647) |+918.22% | | 1 range tombstone |2176540 (± 39050) |2434954 (± 24563) |+11.87% | - Short range scan | tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% | | ------------- | ------------- | ------------- | ------------- | | 0 range tombstone |35398 (± 533) |35338 (± 569) |-0.17% | | 100 |28276 (± 664) |31684 (± 331) |+12.05% | | 1000 |7637 (± 77) |25422 (± 277) |+232.88% | | 10000 |1367 |28667 |+1997.07% | | 1 range tombstone |32618 (± 581) |32748 (± 506) |+0.4% | - Long range scan | tombstone width | Pre-PR ops/sec | Post-PR ops/sec | ±% | | ------------- | ------------- | ------------- | ------------- | | 0 range tombstone |2262 (± 33) |2353 (± 20) |+4.02% | | 100 |1696 (± 26) |1926 (± 18) |+13.56% | | 1000 |410 (± 6) |1255 (± 29) |+206.1% | | 10000 |25 |414 |+1556.0% | | 1 range tombstone |1957 (± 30) |2185 (± 44) |+11.65% | - Microbench does not show significant regression: https://gist.github.com/cbi42/59f280f85a59b678e7e5d8561e693b61 Reviewed By: ajkr Differential Revision: D38450331 Pulled By: cbi42 fbshipit-source-id: b5ef12e8d8c289ed2e163ccdf277f5039b511fca
-
- 02 9月, 2022 4 次提交
-
-
由 Peter Dillinger 提交于
Summary: Appears possible after 5de98f2d introduced possible lost updates. Could be related to 2af132c3 also. Simply ensure no sqrt of negative. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10586 Test Plan: test added Reviewed By: ajkr Differential Revision: D39068391 Pulled By: pdillinger fbshipit-source-id: 230b214a41e6c9ae91a1ef3e8b2a17b46bbb17c2
-
由 Peter Dillinger 提交于
Summary: ... because we are frequently seeing the 10m "no output" timeouts on these Pull Request resolved: https://github.com/facebook/rocksdb/pull/10627 Test Plan: CI Reviewed By: hx235 Differential Revision: D39224922 Pulled By: pdillinger fbshipit-source-id: f54c7adb5de87b2f57ccbc7f4e6c541b9cd37e08
-
由 Levi Tamasi 提交于
Summary: With the current code, when a blob isn't found in the cache and gets read from the blob file and then inserted into the cache, the application gets passed the self-contained `PinnableSlice` resulting from the blob file read. The patch changes this so that the `PinnableSlice` pins the cache entry instead in this case. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10625 Test Plan: `make check` Reviewed By: pdillinger Differential Revision: D39220904 Pulled By: ltamasi fbshipit-source-id: cb9c62881e3523b1e9f614e00bf503bac2fe3b0a
-
由 Akanksha Mahajan 提交于
Summary: RocksDB does auto-readahead for iterators on noticing more than two reads for a table file if user doesn't provide readahead_size and reads are sequential. A new option num_file_reads_for_auto_readahead is added which can be configured and indicates after how many sequential reads prefetching should be start. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10556 Test Plan: Existing and new unit test Reviewed By: anand1976 Differential Revision: D38947147 Pulled By: akankshamahajan15 fbshipit-source-id: c9eeab495f84a8df7f701c42f04894e46440ad97
-
- 01 9月, 2022 6 次提交
-
-
由 anand76 提交于
Summary: This stat was only getting updated in the async (coroutine) version of MultiGet. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10622 Reviewed By: akankshamahajan15 Differential Revision: D39188790 Pulled By: anand1976 fbshipit-source-id: 7e231507f65fc94c8a006c38f79dfba182a2c24a
-
由 Changyu Bi 提交于
Summary: sanity check value for option `memtable_protection_bytes_per_key` in `ColumnFamilyData::ValidateOptions()`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10621 Test Plan: `make check`, added unit test in ColumnFamilyTest. Reviewed By: ajkr Differential Revision: D39180133 Pulled By: cbi42 fbshipit-source-id: 009e0da3ccb332d1c9e14d20193304610bd4eb8a
-
由 Andrew Kryczka 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10172 Reviewed By: riversand963 Differential Revision: D37164671 Pulled By: ajkr fbshipit-source-id: 40eb919b8dc261d502510e878ee8ac7874ab35d0
-
由 Hui Xiao 提交于
Summary: **Context/Summary:** `ExpectedState` is not aware of transaction-related concept so `use_txn=1 ` is not compatible with `sync_fault_injection=1`. Therefore this PR disabled this combination until we expand our correctness testing to transaction related features. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10605 Test Plan: - Run the following commands to verify `--use_txn` is correctly sanitized - `python3 ./tools/db_crashtest.py blackbox --use_txn=1 --sync_fault_injection=1 ` - `python3 ./tools/db_crashtest.py blackbox --use_txn=0 --sync_fault_injection=1 ` Reviewed By: ajkr Differential Revision: D39121287 Pulled By: hx235 fbshipit-source-id: 7d5d6dd32479ea1c07df4f38322650f3a60def9c
-
由 sdong 提交于
Summary: Right now, when the option migration tool migrates to FIFO compaction, it compacts all the data into one single SST file and move to L0. Although it creates a valid LSM-tree for FIFO, for any data to be deleted for FIFO, the giant file will be deleted, which might make the DB almost empty. There is not good solution for it, because usually we don't have enough information to reconstruct the FIFO LSM-tree. This change changes to a solution that compromises the FIFO condition. We hope the solution is more useable. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10600 Test Plan: Add unit tests for that. Reviewed By: jay-zhuang Differential Revision: D39106424 fbshipit-source-id: bdfd852c3b343373765b8d9716fefc08fd27145c
-
由 Levi Tamasi 提交于
Summary: Currently, `db_bench` and `db_stress` print the blob cache options even if a shared block/blob cache is configured, i.e. when they are not actually in effect. The patch changes this so they are only printed when a separate blob cache is used. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10614 Test Plan: Tested manually using `db_bench` and `db_stress`. Reviewed By: akankshamahajan15 Differential Revision: D39144603 Pulled By: ltamasi fbshipit-source-id: f714304c5d46186f8514746c27ee6f52aa3e4af8
-
- 31 8月, 2022 2 次提交
-
-
由 Levi Tamasi 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10603 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D39117952 Pulled By: ltamasi fbshipit-source-id: 5e956fa2fc18974876a5c87686acb50718e0edb7
-
由 Hui Xiao 提交于
Add missing mutex when reading from shared variable bg_bottom_compaction_scheduled_, bg_compaction_scheduled_ (#10610) Summary: **Context/Summary:** According to https://github.com/facebook/rocksdb/blob/7.6.fb/db/compaction/compaction_job.h#L328-L332, any reading in the form of `*bg_compaction_scheduled_` , `*bg_bottom_compaction_scheduled_` should be protected by mutex, which isn't the case for some assert statement. This leads to a data race that can be repro-ed by the following command (command coming soon) ``` db=/dev/shm/rocksdb_crashtest_blackbox exp=/dev/shm/rocksdb_crashtest_expected rm -rf $db $exp mkdir -p $exp ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=$db --delpercent=10 --delrangepercent=0 --destroy_db_initially=1 --expected_values_dir=$exp --iterpercent=0 --key_len_percent_dist=1,30,69 --max_key=1000000 --max_key_len=3 --prefixpercent=0 --readpercent=0 --reopen=0 --ops_per_thread=100000000 --value_size_mult=32 --writepercent=90 --compaction_pri=4 --use_txn=1 --level_compaction_dynamic_level_bytes=True --compaction_ttl=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --value_size_mult=32 --verify_db_one_in=1000 --write_buffer_size=65536 --mark_for_compaction_one_file_in=10 --max_background_compactions=20 --max_key=25000000 --max_key_len=3 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=2097152 --target_file_size_base=2097152 --target_file_size_multiplier=2 ``` ``` WARNING: ThreadSanitizer: data race (pid=73424) Read of size 4 at 0x7b8c0000151c by thread T13: #0 ReleaseSubcompactionResources internal_repo_rocksdb/repo/db/compaction/compaction_job.cc:390 (db_stress+0x630aa3) https://github.com/facebook/rocksdb/issues/1 rocksdb::CompactionJob::Run() internal_repo_rocksdb/repo/db/compaction/compaction_job.cc:741 (db_stress+0x630aa3) https://github.com/facebook/rocksdb/issues/2 rocksdb::DBImpl::BackgroundCompaction(bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::DBImpl::PrepickedCompaction*, rocksdb::Env::Priority) internal_repo_rocksdb/repo/db/db_impl/db_impl_compaction_flush.cc:3436 (db_stress+0x60b2cc) https://github.com/facebook/rocksdb/issues/3 rocksdb::DBImpl::BackgroundCallCompaction(rocksdb::DBImpl::PrepickedCompaction*, rocksdb::Env::Priority) internal_repo_rocksdb/repo/db/db_impl/db_impl_compaction_flush.cc:2950 (db_stress+0x606d79) https://github.com/facebook/rocksdb/issues/4 rocksdb::DBImpl::BGWorkCompaction(void*) internal_repo_rocksdb/repo/db/db_impl/db_impl_compaction_flush.cc:2693 (db_stress+0x60356a) Previous write of size 4 at 0x7b8c0000151c by thread T12 (mutexes: write M438955329917552448): #0 rocksdb::DBImpl::BackgroundCallCompaction(rocksdb::DBImpl::PrepickedCompaction*, rocksdb::Env::Priority) internal_repo_rocksdb/repo/db/db_impl/db_impl_compaction_flush.cc:3018 (db_stress+0x6072a1) https://github.com/facebook/rocksdb/issues/1 rocksdb::DBImpl::BGWorkCompaction(void*) internal_repo_rocksdb/repo/db/db_impl/db_impl_compaction_flush.cc:2693 (db_stress+0x60356a) Location is heap block of size 6720 at 0x7b8c00000000 allocated by main thread: #0 operator new(unsigned long, std::align_val_t) <null> (db_stress+0xbab5bb) https://github.com/facebook/rocksdb/issues/1 rocksdb::DBImpl::Open(rocksdb::DBOptions const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::vector<rocksdb::ColumnFamilyDescriptor, std::allocator<rocksdb::ColumnFamilyDescriptor> > const&, std::vector<rocksdb::ColumnFamilyHandle*, std::allocator<rocksdb::ColumnFamilyHandle*> >*, rocksdb::DB**, bool, bool) internal_repo_rocksdb/repo/db/db_impl/db_impl_open.cc:1811 (db_stress+0x69769a) https://github.com/facebook/rocksdb/issues/2 rocksdb::TransactionDB::Open(rocksdb::DBOptions const&, rocksdb::TransactionDBOptions const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::vector<rocksdb::ColumnFamilyDescriptor, std::allocator<rocksdb::ColumnFamilyDescriptor> > const&, std::vector<rocksdb::ColumnFamilyHandle*, std::allocator<rocksdb::ColumnFamilyHandle*> >*, rocksdb::TransactionDB**) internal_repo_rocksdb/repo/utilities/transactions/pessimistic_transaction_db.cc:258 (db_stress+0x8ae1f4) https://github.com/facebook/rocksdb/issues/3 rocksdb::StressTest::Open(rocksdb::SharedState*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_test_base.cc:2611 (db_stress+0x32b927) https://github.com/facebook/rocksdb/issues/4 rocksdb::StressTest::InitDb(rocksdb::SharedState*) internal_repo_rocksdb/repo/db_stress_tool/db_stress_test_base.cc:290 (db_stress+0x34712c) ``` This PR added all the missing mutex that should've been in place Pull Request resolved: https://github.com/facebook/rocksdb/pull/10610 Test Plan: - Past repro command - Existing CI Reviewed By: riversand963 Differential Revision: D39143016 Pulled By: hx235 fbshipit-source-id: 51dd4db55ad306f3dbda5d0dd54d6f2513cf70f2
-
- 30 8月, 2022 9 次提交
-
-
由 gitbw95 提交于
Summary: This should fix an import issue detected in meta internal tests. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10604 Test Plan: Unit Tests. Reviewed By: hx235 Differential Revision: D39120414 Pulled By: gitbw95 fbshipit-source-id: dbd016d7f47b9f54aab5ea61e8d3cd79734f46af
-
由 Yanqin Jin 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10578 Test Plan: make check Reviewed By: ajkr Differential Revision: D39064748 Pulled By: riversand963 fbshipit-source-id: c7c135b7b713608edb14614846050ece6d4cc59d
-
由 Hui Xiao 提交于
Summary: **Context:** Below crash test revealed a bug that directory containing CURRENT file (short for `dir_contains_current_file` below) was not always get synced after a new CURRENT is created and being called with `RenameFile` as part of the creation. This bug exposes a risk that such un-synced directory containing the updated CURRENT can’t survive a host crash (e.g, power loss) hence get corrupted. This then will be followed by a recovery from a corrupted CURRENT that we don't want. The root-cause is that a nullptr `FSDirectory* dir_contains_current_file` sometimes gets passed-down to `SetCurrentFile()` hence in those case `dir_contains_current_file->FSDirectory::FsyncWithDirOptions()` will be skipped (which otherwise will internally call`Env/FS::SyncDic()` ) ``` ./db_stress --acquire_snapshot_one_in=10000 --adaptive_readahead=1 --allow_data_in_errors=True --avoid_unnecessary_blocking_io=0 --backup_max_size=104857600 --backup_one_in=100000 --batch_protection_bytes_per_key=8 --block_size=16384 --bloom_bits=134.8015470676662 --bottommost_compression_type=disable --cache_size=8388608 --checkpoint_one_in=1000000 --checksum_type=kCRC32c --clear_column_family_one_in=0 --compact_files_one_in=1000000 --compact_range_one_in=1000000 --compaction_pri=2 --compaction_ttl=100 --compression_max_dict_buffer_bytes=511 --compression_max_dict_bytes=16384 --compression_type=zstd --compression_use_zstd_dict_trainer=1 --compression_zstd_max_train_bytes=65536 --continuous_verification_interval=0 --data_block_index_type=0 --db=$db --db_write_buffer_size=1048576 --delpercent=5 --delrangepercent=0 --destroy_db_initially=0 --disable_wal=0 --enable_compaction_filter=0 --enable_pipelined_write=1 --expected_values_dir=$exp --fail_if_options_file_error=1 --file_checksum_impl=none --flush_one_in=1000000 --get_current_wal_file_one_in=0 --get_live_files_one_in=1000000 --get_property_one_in=1000000 --get_sorted_wal_files_one_in=0 --index_block_restart_interval=4 --ingest_external_file_one_in=0 --iterpercent=10 --key_len_percent_dist=1,30,69 --level_compaction_dynamic_level_bytes=True --mark_for_compaction_one_file_in=10 --max_background_compactions=20 --max_bytes_for_level_base=10485760 --max_key=10000 --max_key_len=3 --max_manifest_file_size=16384 --max_write_batch_group_size_bytes=64 --max_write_buffer_number=3 --max_write_buffer_size_to_maintain=0 --memtable_prefix_bloom_size_ratio=0.001 --memtable_protection_bytes_per_key=1 --memtable_whole_key_filtering=1 --mmap_read=1 --nooverwritepercent=1 --open_metadata_write_fault_one_in=0 --open_read_fault_one_in=0 --open_write_fault_one_in=0 --ops_per_thread=100000000 --optimize_filters_for_memory=1 --paranoid_file_checks=1 --partition_pinning=2 --pause_background_one_in=1000000 --periodic_compaction_seconds=0 --prefix_size=5 --prefixpercent=5 --prepopulate_block_cache=1 --progress_reports=0 --read_fault_one_in=1000 --readpercent=45 --recycle_log_file_num=0 --reopen=0 --ribbon_starting_level=999 --secondary_cache_fault_one_in=32 --secondary_cache_uri=compressed_secondary_cache://capacity=8388608 --set_options_one_in=10000 --snapshot_hold_ops=100000 --sst_file_manager_bytes_per_sec=0 --sst_file_manager_bytes_per_truncate=0 --subcompactions=3 --sync_fault_injection=1 --target_file_size_base=2097 --target_file_size_multiplier=2 --test_batches_snapshots=1 --top_level_index_pinning=1 --use_full_merge_v1=1 --use_merge=1 --value_size_mult=32 --verify_checksum=1 --verify_checksum_one_in=1000000 --verify_db_one_in=100000 --verify_sst_unique_id_in_manifest=1 --wal_bytes_per_sync=524288 --write_buffer_size=4194 --writepercent=35 ``` ``` stderr: WARNING: prefix_size is non-zero but memtablerep != prefix_hash db_stress: utilities/fault_injection_fs.cc:748: virtual rocksdb::IOStatus rocksdb::FaultInjectionTestFS::RenameFile(const std::string &, const std::string &, const rocksdb::IOOptions &, rocksdb::IODebugContext *): Assertion `tlist.find(tdn.second) == tlist.end()' failed.` ``` **Summary:** The PR ensured the non-test path pass down a non-null dir containing CURRENT (which is by current RocksDB assumption just db_dir) by doing the following: - Renamed `directory_to_fsync` as `dir_contains_current_file` in `SetCurrentFile()` to tighten the association between this directory and CURRENT file - Changed `SetCurrentFile()` API to require `dir_contains_current_file` being passed-in, instead of making it by default nullptr. - Because `SetCurrentFile()`'s `dir_contains_current_file` is passed down from `VersionSet::LogAndApply()` then `VersionSet::ProcessManifestWrites()` (i.e, think about this as a chain of 3 functions related to MANIFEST update), these 2 functions also got refactored to require `dir_contains_current_file` - Updated the non-test-path callers of these 3 functions to obtain and pass in non-nullptr `dir_contains_current_file`, which by current assumption of RocksDB, is the `FSDirectory* db_dir`. - `db_impl` path will obtain `DBImpl::directories_.getDbDir()` while others with no access to such `directories_` are obtained on the fly by creating such object `FileSystem::NewDirectory(..)` and manage it by unique pointers to ensure short life time. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10573 Test Plan: - `make check` - Passed the repro db_stress command - For future improvement, since we currently don't assert dir containing CURRENT to be non-nullptr due to https://github.com/facebook/rocksdb/pull/10573#pullrequestreview-1087698899, there is still chances that future developers mistakenly pass down nullptr dir containing CURRENT thus resulting skipped sync dir and cause the bug again. Therefore a smarter test (e.g, such as quoted from ajkr "(make) unsynced data loss to be dropping files corresponding to unsynced directory entries") is still needed. Reviewed By: ajkr Differential Revision: D39005886 Pulled By: hx235 fbshipit-source-id: 336fb9090d0cfa6ca3dd580db86268007dde7f5a
-
由 Levi Tamasi 提交于
Summary: The patch adds a dedicated cache entry role for blob values and switches to a registered deleter so that blobs show up as a separate bucket (as opposed to "Misc") in the cache occupancy statistics, e.g. ``` Block cache entry stats(count,size,portion): DataBlock(133515,531.73 MB,13.6866%) BlobValue(1824855,3.10 GB,81.7071%) Misc(1,0.00 KB,0%) ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10601 Test Plan: Ran `make check` and tested the cache occupancy statistics using `db_bench`. Reviewed By: riversand963 Differential Revision: D39107915 Pulled By: ltamasi fbshipit-source-id: 8446c3b190a41a144030df73f318eeda4398c125
-
由 anand76 提交于
Summary: Imported a fix to "rocksdb.prefetched.bytes.discarded" stat from https://github.com/facebook/rocksdb/issues/10561, and added a new stat "rocksdb.async.prefetch.abort.micros" to measure time spent waiting for async reads to abort. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10585 Reviewed By: akankshamahajan15 Differential Revision: D39067000 Pulled By: anand1976 fbshipit-source-id: d7cda71abb48017239bd5fd832345a16c7024faf
-
由 Yanqin Jin 提交于
Summary: When verification fails for db_stress, print more information about value read from the db and expected state. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10587 Test Plan: make check ./db_stress Reviewed By: akankshamahajan15, hx235 Differential Revision: D39078511 Pulled By: riversand963 fbshipit-source-id: 77ac8ffae01fc3a9b58a02c2e7bbe141e1a18f0b
-
由 Peter Dillinger 提交于
Summary: Some APIs for getting live files, which are used by Checkpoint and BackupEngine, can optionally trigger and wait for a flush. These would deadlock when used on a read-only DB. Here we fix that by assuming the user wants the overall operation to succeed and is OK without flushing (because the DB is read-only). Follow-up work: the same or other issues can be hit by directly invoking some DB functions that are clearly not appropriate for read-only instance, but are not covered by overrides in DBImplReadOnly and CompactedDBImpl. These should be fixed to avoid similar problems on accidental misuse. (Long term, it would be nice to have a DBReadOnly class without those members, like BackupEngineReadOnly.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10569 Test Plan: tests updated to catch regression (hang before the fix) Reviewed By: riversand963 Differential Revision: D38995759 Pulled By: pdillinger fbshipit-source-id: f5f8bc7123e13cb45bd393dd974d7d6eda20bc68
-
由 Changyu Bi 提交于
Summary: https://github.com/facebook/rocksdb/issues/10538 added `TestIterateAgainstExpected()` in `no_batched_ops_test` to verify iterator correctness against the in memory expected state. It is not compatible when run after some other stress tests, e.g. `TestPut()` in `batched_op_stress`, that either do not set expected state when writing to DB or use keys that cannot be parsed by `GetIntVal()`. The assert [here](https://github.com/facebook/rocksdb/blob/d17be55aab80b856f96f4af89f8d18fef96646b4/db_stress_tool/db_stress_common.h#L520) could fail. This PR fixed this issue by setting iterator upperbound to `max_key` when `destroy_db_initially=0` to avoid the key space that `batched_op_stress` touches. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10590 Test Plan: ``` # set up DB with batched_op_stress ./db_stress --test_batches_snapshots=1 --verify_iterator_with_expected_state_one_in=1 --max_key_len=3 --max_key=100000000 --skip_verifydb=1 --continuous_verification_interval=0 --writepercent=85 --delpercent=3 --delrangepercent=0 --iterpercent=10 --nooverwritepercent=1 --prefixpercent=0 --readpercent=2 --key_len_percent_dist=1,30,69 # Before this PR, the following test will fail the asserts with error msg like the following # Assertion failed: (size_key <= key_gen_ctx.weights.size() * sizeof(uint64_t)), function GetIntVal, file db_stress_common.h, line 524. ./db_stress --verify_iterator_with_expected_state_one_in=1 --max_key_len=3 --max_key=100000000 --skip_verifydb=1 --continuous_verification_interval=0 --writepercent=0 --delpercent=3 --delrangepercent=0 --iterpercent=95 --nooverwritepercent=1 --prefixpercent=0 --readpercent=2 --key_len_percent_dist=1,30,69 --destroy_db_initially=0 ``` Reviewed By: ajkr Differential Revision: D39085243 Pulled By: cbi42 fbshipit-source-id: a7dfee2320c330773b623b442d730fd014ec7056
-
由 Levi Tamasi 提交于
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/10577 Reviewed By: akankshamahajan15 Differential Revision: D39035884 Pulled By: ltamasi fbshipit-source-id: 48f116f8ca172b7eb5eb3651f39ddb891a7ffade
-
- 28 8月, 2022 1 次提交
-
-
由 Andrew Hutchings 提交于
Summary: FreeBSD doesn't have `JEMALLOC_USABLE_SIZE_CONST` so we need to define it. This fixes MariaDB MDEV-20248. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10575 Reviewed By: jay-zhuang Differential Revision: D39057665 Pulled By: ajkr fbshipit-source-id: 3874779d12a1dd5036324947f6372e6ad57a7b08
-
- 27 8月, 2022 2 次提交
-
-
由 zhangenming 提交于
Summary: Fixed #10381 for blog's navigation bar UI. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10580 Reviewed By: hx235 Differential Revision: D39079045 Pulled By: cbi42 fbshipit-source-id: 922cf2624f201c0af42815b23d97361fc0151d93
-
由 Levi Tamasi 提交于
Summary: The patch improves the bookkeeping around the memory usage of cached blobs in two ways: 1) it uses `malloc_usable_size`, which accounts for allocator bin sizes etc., and 2) it also considers the memory usage of the `BlobContents` object in addition to the blob itself. Note: some unit tests had been relying on the cache charge being equal to the size of the cached blob; these were updated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10583 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D39060680 Pulled By: ltamasi fbshipit-source-id: 3583adce2b4ce6e84861f3fadccbfd2e5a3cc482
-
- 26 8月, 2022 3 次提交
-
-
由 bilyz 提交于
Summary: The column meaning explanation is not correct according to the parsed human-readable trace file. Following are the results data from parsed trace human-readable file format. The key is in the first column. ``` 0x00000005 6 1 0 1661317998095439 0x00000007 0 1 0 1661317998095479 0x00000008 6 1 0 1661317998095493 0x0000000300000001 1 1 6 1661317998101508 0x0000000300000000 1 1 6 1661317998101508 0x0000000300000001 0 1 0 1661317998106486 0x0000000300000000 0 1 0 1661317998106498 0x0000000A 6 1 0 1661317998106515 0x00000007 0 1 0 1661317998111887 0x00000001 6 1 0 1661317998111923 ``` Pull Request resolved: https://github.com/facebook/rocksdb/pull/10576 Reviewed By: ajkr Differential Revision: D39039110 Pulled By: jay-zhuang fbshipit-source-id: eade6394c7870005b717846af09a848be6f677ce
-
由 Jay Zhuang 提交于
Summary: Timer has a limitation that it cannot re-register a task with the same name, because the cancel only mark the task as invalid and wait for the Timer thread to clean it up later, before the task is cleaned up, the same task name cannot be added. Which makes the task option update likely to fail, which basically cancel and re-register the same task name. Change the periodic task name to a random unique id and store it in periodic_task_scheduler. Also refactor the `periodic_work` to `periodic_task` to make each job function as a `task`. Pull Request resolved: https://github.com/facebook/rocksdb/pull/10379 Test Plan: unittests Reviewed By: ajkr Differential Revision: D38000615 Pulled By: jay-zhuang fbshipit-source-id: e4135f9422e3b53aaec8eda54f4e18ce633a279e
-
由 Levi Tamasi 提交于
Summary: The patch introduces a new class called `BlobContents`, which represents a single uncompressed blob value. We currently use `std::string` for this purpose; `BlobContents` is somewhat smaller but the primary reason for a dedicated class is that it enables certain improvements and optimizations like eliding a copy when inserting a blob into the cache, using custom allocators, or more control over and better accounting of the memory usage of cached blobs (see https://github.com/facebook/rocksdb/issues/10484). (We plan to implement these in subsequent PRs.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/10571 Test Plan: `make check` Reviewed By: riversand963 Differential Revision: D39000965 Pulled By: ltamasi fbshipit-source-id: f296eddf9dec4fc3e11cad525b462bdf63c78f96
-