- 15 4月, 2015 3 次提交
-
-
由 sdong 提交于
Summary: Recent change of DBTest.DynamicLevelCompressionPerLevel2 has a bug that the second sync point is not enabled. Fix it. Also add an assert for that. Also, flush compression is not tracked in the test. Add it. Test Plan: Build everything Subscribers: leveldb, dhruba Differential Revision: https://reviews.facebook.net/D37101
-
由 sdong 提交于
Summary: When commiting the sync point interface change, didn't resolve the new occurance of the old interface in rebase. Fix it. Test Plan: Build and see it pass Reviewers: igor, yhchiang, rven, anthony, kradhakrishnan Subscribers: leveldb, dhruba Differential Revision: https://reviews.facebook.net/D37095
-
由 sdong 提交于
SyncPoint to allow a callback with an argument and use it to get DBTest.DynamicLevelCompressionPerLevel2 more straight-forward Summary: Allow users to give a callback function with parameter using sync point, so more complicated verification can be done in tests. Use it in DBTest.DynamicLevelCompressionPerLevel2 so that failures will be more easy to debug. Test Plan: Run all tests. Run DBTest.DynamicLevelCompressionPerLevel2 with valgrind check. Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor Reviewed By: igor Subscribers: leveldb, dhruba Differential Revision: https://reviews.facebook.net/D36999
-
- 14 4月, 2015 9 次提交
-
-
由 Igor Canadi 提交于
Summary: https://reviews.facebook.net/D36963 made the debug build much faster and that triggered failures of CompactFilesOnLevelCompaction test. 3 out of 4 last tests on Jenkins failed. I'm disabling this test temporarily, since we likely know the reason why it's failing and there's already work in progress to address it -- https://reviews.facebook.net/D36225 Test Plan: none Reviewers: sdong, rven, yhchiang, meyering Reviewed By: meyering Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36993
-
由 Igor Canadi 提交于
Summary: based on discussion on https://reviews.facebook.net/D36969 Test Plan: will let jenkins do its job Reviewers: sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36975
-
由 Mark Callaghan 提交于
Summary: This changes loads to use vector memtable and disable the WAL. This also increases the chance we will see IO bottlenecks during loads which is good to stress test HW. But I also think it is a good way to load data quickly as this is a bulk operation and the WAL isn't needed. The two numbers below are the MB/sec rates for fillseq, bulkload using a skiplist or vector memtable and the WAL enabled or disabled. There is a big benefit from using the vector memtable and WAL disabled. Alas there is also a perf bug in the use of std::sort for ordered input when the vector is flushed. Task is open for that. 112, 66 - skiplist with wal 250, 116 - skiplist without wal 110, 108 - vector with wal 232, 370 - vector without wal Task ID: # Blame Rev: Test Plan: Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D36957
-
由 Igor Canadi 提交于
Summary: We should use mocked-out env for these tests to make it more realiable. Added benefit is that instead of actually sleeping for 3 seconds, we can instead pretend to sleep and just increase time counters. Test Plan: for i in `seq 100`; do ./wal_manager_test --gtest_filter=WalManagerTest.WALArchivalTtl ;done Reviewers: rven, meyering Reviewed By: meyering Subscribers: meyering, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36951
-
由 Igor Canadi 提交于
Summary: As title. For every operation we're asserting Valid(), which sorts the data. That's pretty terrible. We have to be careful to have decent performance even with DEBUG builds. Test Plan: make check Reviewers: sdong, rven, yhchiang, MarkCallaghan Reviewed By: MarkCallaghan Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36969
-
由 Igor Canadi 提交于
Summary: See github issue 574: https://github.com/facebook/rocksdb/issues/574 Basically when we're running in DEBUG mode we're calling `usleep(0)` on every mutex lock. I bisected the issue to https://reviews.facebook.net/D36963. Instead of calling sleep(0), this diff just avoids calling SleepForMicroseconds() when delay is not set. Test Plan: bpl=10485760;overlap=10;mcz=2;del=300000000;levels=2;ctrig=10000000; delay=10000000; stop=10000000; wbn=30; mbc=20; mb=1073741824;wbs=268435456; dds=1; sync=0; r=100000; t=1; vs=800; bs=65536; cs=1048576; of=500000; si=1000000; ./db_bench --benchmarks=fillrandom --disable_seek_compaction=1 --mmap_read=0 --statistics=1 --histogram=1 --num=$r --threads=$t --value_size=$vs --block_size=$bs --cache_size=$cs --bloom_bits=10 --cache_numshardbits=4 --open_files=$of --verify_checksum=1 --db=/tmp/rdb10test --sync=$sync --disable_wal=1 --compression_type=snappy --stats_interval=$si --compression_ratio=0.5 --disable_data_sync=$dds --write_buffer_size=$wbs --target_file_size_base=$mb --max_write_buffer_number=$wbn --max_background_compactions=$mbc --level0_file_num_compaction_trigger=$ctrig --level0_slowdown_writes_trigger=$delay --level0_stop_writes_trigger=$stop --num_levels=$levels --delete_obsolete_files_period_micros=$del --min_level_to_compress=$mcz --max_grandparent_overlap_factor=$overlap --stats_per_interval=1 --max_bytes_for_level_base=$bpl --memtablerep=vector --use_existing_db=0 --disable_auto_compactions=1 --source_compaction_factor=10000000 | grep ops Before: fillrandom : 117.525 micros/op 8508 ops/sec; 6.6 MB/s After: fillrandom : 1.283 micros/op 779502 ops/sec; 606.6 MB/s Reviewers: rven, yhchiang, sdong Reviewed By: sdong Subscribers: meyering, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36963
-
由 Venkatesh Radhakrishnan 提交于
Summary: Make target for running all xfunc tests Test Plan: make xfunc Reviewers: igor, sdong, meyering Reviewed By: meyering Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36873
-
由 Igor Canadi 提交于
Summary: The problem is that sometimes two memtables will be compacted together into a single file. In that case, our assertion ASSERT_EQ(NumTableFilesAtLevel(0), 5); fails because same amount of data is in 4 files instead of 5. We should wait for flush so that we prevent two memtables merging into a single file. Test Plan: `for i in `seq 20`; do mrtest FIFOCompactionTest; done` -- fails at least once before. fails zero times after. Reviewers: rven Reviewed By: rven Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36939
-
由 Igor Canadi 提交于
Summary: 1. it doesn't work 2. we're not using it In the future, if we need general benchmark framework, we should probably use https://github.com/google/benchmark Test Plan: make all Reviewers: yhchiang, rven, anthony, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36777
-
- 13 4月, 2015 1 次提交
-
-
由 Dhruba Borthakur 提交于
Summary: https://code.facebook.com/posts/1639473982937255/updating-our-open-source-patent-grant/ This has been done by other FB's open source projects already: https://github.com/facebook/react/commit/b8ba8c83f318b84e42933f6928f231dc0918f864 https://github.com/facebook/osquery/blob/master/PATENTS Test Plan: make check Reviewers: igor, sdong Reviewed By: sdong Subscribers: jamesgpearce, leveldb, dhruba Differential Revision: https://reviews.facebook.net/D36879
-
- 11 4月, 2015 5 次提交
-
-
由 Igor Canadi 提交于
Summary: oops Test Plan: compiles now Reviewers: sdong, yhchiang Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36867
-
由 Igor Canadi 提交于
Summary: The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong). Here are couple of things demonstrating that Compaction class is hard to use: 1. we have two constructors of Compaction class 2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles 3. it's easy to introduce a subtle and dangerous bug like this: D36225 4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction.cc#L236-L241. It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: https://github.com/facebook/rocksdb/blob/afbafeaeaebfd27a0f3e992fee8e0c57d07658fa/db/compaction_picker.cc#L204-L210 The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup. My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object. This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes: * have one Compaction constructor instead of two. * inputs_ is constant after construction * MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction. * SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input. * CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need. Test Plan: make check make asan_check make valgrind_check Reviewers: rven, anthony, sdong, yhchiang Reviewed By: yhchiang Subscribers: sdong, yhchiang, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36687
-
由 agiardullo 提交于
Summary: Need to remember to unref MemTableList->current() before deleting. Test Plan: ran test with valgrind Reviewers: igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36855
-
由 krad 提交于
Summary: Adding verbosity to existing comments. Test Plan: None Reviewers: sdong CC: leveldb Task ID: #6718960 Blame Rev:
-
由 Igor Canadi 提交于
Summary: Thanks Ankit! Test Plan: none Reviewers: ankgup87 Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D36837
-
- 10 4月, 2015 9 次提交
-
-
由 agiardullo 提交于
Summary: Test failing due to a missing directory caused by a simple bug (did not run into this on my dev box since the path already existed). We should look into deleting test::TmpDir() before each test run. Test Plan: ran test Reviewers: igor, yhchiang, meyering, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36831
-
由 Yueh-Hsuan Chiang 提交于
Summary: Fixed xfunc related compile errors in ROCKSDB_LITE Now make OPT=-DROCKSDB_LITE shared_lib -j32 would work Test Plan: make clean make OPT=-DROCKSDB_LITE shared_lib -j32 make clean make OPT=-DROCKSDB_LITE static_lib -j32 Reviewers: sdong, igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36825
-
由 agiardullo 提交于
Summary: Add tests for MemTableList Test Plan: run test Reviewers: yhchiang, kradhakrishnan, sdong, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36735
-
由 Yueh-Hsuan Chiang 提交于
Summary: Fix a compile error in ROCKSDB_LITE in db/db_impl.cc related to internal_stats. Test Plan: make OPT=-DROCKSDB_LITE shared_lib Reviewers: sdong, igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36819
-
由 sdong 提交于
Summary: "make commit-prereq" uses "make release" which overrides OPT, so ROCKSDB_LITE is not covered. Fix it by using "make static_lib" Test Plan: Run it and see it fail (which is expected) Reviewers: yhchiang, meyering, rven, anthony, kradhakrishnan, igor Reviewed By: igor Subscribers: leveldb, dhruba Differential Revision: https://reviews.facebook.net/D36813
-
由 Yueh-Hsuan Chiang 提交于
Summary: Fix a compilation error in ROCKSDB_LITE in db/internal_stats.h Other compilation errors will be fixed in a separate diff. Test Plan: make OPT=-DROCKSDB_LITE Reviewers: sdong, igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36807
-
由 sdong 提交于
Summary: Add a test case: Write some keys without sync, flush, write other keys and do sync. Before flush finishes, host crashes and unsync data is dropped. Tag the new test as disabled since it is not passing. Test Plan: Run the test Reviewers: MarkCallaghan, rven, anthony, igor, kradhakrishnan Reviewed By: igor Subscribers: leveldb, dhruba Differential Revision: https://reviews.facebook.net/D36741
-
由 Mark Callaghan 提交于
Summary: This fixes two problems: 1) the env should not be created twice when use_existing_db is false 2) the env dtor should run before cachedev_fd_ is closed. Task ID: # Blame Rev: Test Plan: Revert Plan: Database Impact: Memcache Impact: Other Notes: EImportant: - begin *PUBLIC* platform impact section - Bugzilla: # - end platform impact - Reviewers: igor Reviewed By: igor Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D36795
-
由 Igor Canadi 提交于
Summary: I don't think we need to use whole-archive to include jemalloc. This change only affects our development builds -- it does not affect our open source builds (which don't support jemalloc) or our fbcode third-party2 builds (which use open-source build codepaths). Test Plan: make verify that jemalloc is running by running `MALLOC_CONF="prof:true" ./cache_test` and observing that file was created Reviewers: MarkCallaghan Reviewed By: MarkCallaghan Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36783
-
- 09 4月, 2015 7 次提交
-
-
由 agiardullo 提交于
Summary: Other than making some class members private, this is a documentation-only change Test Plan: unit tests Reviewers: sdong, yhchiang, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36567
-
由 sdong 提交于
Summary: Add a script, which checks out changes from a list of tags, build them and load the same data into it. In the last, checkout the target build and make sure it can successfully open DB and read all the data. It is implemented through ldb tool, because ldb tool is available from all previous builds so that we don't have to cross build anything. Test Plan: Run the script. Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor Reviewed By: igor Subscribers: leveldb, dhruba Differential Revision: https://reviews.facebook.net/D36639
-
由 krad 提交于
Summary: I think the checksum was turned off by mistake. Test Plan: Run make check Reviewers: igor sdong chip CC: Task ID: Blame Rev:
-
由 sdong 提交于
Summary: Now EnvOptions uses unsanitized DB options. bytes_per_sync is tuned off when rate_limiter is used, but this change doesn't take effort. Test Plan: See different I/O pattern in db_bench running fillseq. Reviewers: yhchiang, kradhakrishnan, rven, anthony, igor Reviewed By: igor Subscribers: leveldb, dhruba Differential Revision: https://reviews.facebook.net/D36723
-
由 Igor Canadi 提交于
Summary: These two files are test binaries and are not included in TESTS in Makefile. Test Plan: `make clean` now deletes those files, too Reviewers: sdong, kradhakrishnan, meyering Reviewed By: kradhakrishnan, meyering Subscribers: kradhakrishnan, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36705
-
由 Jim Meyering 提交于
Summary: When building rocksdbjava and rocksdbjavastatic, create -fPIC-enabled binaries in a temporary subdirectory, jl/. * Makefile (java_libobjects): New variable. (java_libobjects): New rule. (CLEAN_FILES): Arrange for "make clean" to remove that temporary dir. (rocksdbjavastatic): Depend on the new variable. Remove useless OPT=... line. (rocksdbjava): Likewise. Test Plan: JAVA_HOME=/usr/local/jdk-7u67-64 PATH=$JAVA_HOME/bin:$PATH \ make rocksdbjavastatic Reviewers: yhchiang Reviewed By: yhchiang Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D36645
-
由 sdong 提交于
Summary: Now trivial move is only triggered when moving from level n to n+1. With dynamic level base, it is possible that file is moved from level 0 to level n, while levels from 1 to n-1 are empty. Extend trivial move to this case. Test Plan: Add a more unit test of sequential loading. Non-trivial compaction happened without the patch and now doesn't happen. Reviewers: rven, yhchiang, MarkCallaghan, igor Reviewed By: igor Subscribers: leveldb, dhruba, IslamAbdelRahman Differential Revision: https://reviews.facebook.net/D36669
-
- 08 4月, 2015 6 次提交
-
-
由 Igor Canadi 提交于
-
由 Igor Canadi 提交于
Summary: See the file. Test Plan: none Reviewers: lgalanis, meyering, MarkCallaghan, yhchiang, rven, anthony, kradhakrishnan, jayadev, sdong Reviewed By: jayadev Subscribers: jayadev, rdallman, andybons, dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36621
-
由 krad 提交于
Summary: Added a ASCII doodle to represent the log writer format. Test Plan: None Reviewers: sdong CC: leveldb Task ID: 6179896 Blame Rev:
-
由 Yueh-Hsuan Chiang 提交于
Summary: Fix the following compilation error in flashcache.cc on Mac Undefined symbols for architecture x86_64: "rocksdb::NewFlashcacheAwareEnv(rocksdb::Env*, int)", referenced from: rocksdb::Benchmark::Open(rocksdb::Options*) in db_bench.o Test Plan: make db_bench Reviewers: sdong, igor, rven Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36657
-
由 Jim Meyering 提交于
Summary: * src.mk (JNI_NATIVE_SOURCES): New variable, so we don't have to use a glob in Makefile * Makefile (JNI_NATIVE_SOURCES): Remove glob-using definition, now that the explicit list of sources is in src.mk. Test Plan: Run this: JAVA_HOME=/usr/local/jdk-7u67-64 PATH=$JAVA_HOME/bin:$PATH \ make rocksdbjava Reviewers: yhchiang Reviewed By: yhchiang Subscribers: dhruba Differential Revision: https://reviews.facebook.net/D36633
-
由 Igor Canadi 提交于
Summary: As described in https://github.com/facebook/rocksdb/issues/563, we should add minor version to SONAME, since we break ABI with minor releases. I also turned PLATFORM_SHARED_VERSIONED to true by default. This is true in LevelDB and it was switched to false by D15117 for no apparent reason. It should only be false for iOS. Test Plan: `make shared_lib` produced librocksdb.dylib.3.10.0 Reviewers: sdong, yhchiang, meyering Reviewed By: meyering Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D36573
-