- 24 7月, 2014 40 次提交
-
-
由 Alex Crichton 提交于
Closes #15807 (Deprecate some unsafe functions in `str::raw` and remove `OwnedStr` trait) Closes #15859 (Implement `Show` for `CString` and fix warning compiling tests for libcollections) Closes #15911 (Updated LLVM for iOS) Closes #15925 (libsyntax: Remove `~self` and `mut ~self` from the language.) Closes #15930 (Add examples for Checked[Add|Sub|Mul|Div]) Closes #15933 (rustdoc: make table of contents optional) Closes #15937 (librustc: Make bare functions implement the `FnMut` trait.) Closes #15938 (librustc: Check structure constructors against their types.) Closes #15939 (rustdoc: Add a --crate-name option) Closes #15942 (Document trie collections) Closes #15943 (Document SmallIntMap)
-
由 Jonas Hietala 提交于
-
由 Jonas Hietala 提交于
-
由 Jonas Hietala 提交于
-
由 Jonas Hietala 提交于
-
由 Alex Crichton 提交于
Like rustc, this is required by cargo to build documentation.
-
由 Patrick Walton 提交于
This breaks code like: struct Point<T> { x: T, y: T, } let pt = Point::<bool> { x: 1, y: 2, }; Change this code to not contain a type error. For example: let pt = Point::<int> { x: 1, y: 2, }; Closes #9620. Closes #15875. [breaking-change]
-
由 Patrick Walton 提交于
This is done entirely in the libraries for functions up to 16 arguments. A macro is used so that more arguments can be easily added if we need. Note that I had to adjust the overloaded call algorithm to not try calling the overloaded call operator if the callee is a built-in function type, to prevent loops. Closes #15448.
-
由 Aaron Turon 提交于
rustdoc currently determines whether to produce a table of contents (along with numbered sections) from the input type: yes for markdown input, no for Rust input. This commit adds a flag to disable the table of contents for markdown input, which is useful for embedding the output in a larger context.
-
由 nham 提交于
-
由 Patrick Walton 提交于
This eliminates the last vestige of the `~` syntax. Instead of `~self`, write `self: Box<TypeOfSelf>`; instead of `mut ~self`, write `mut self: Box<TypeOfSelf>`, replacing `TypeOfSelf` with the self-type parameter as specified in the implementation. Closes #13885. [breaking-change]
-
由 Valerii Hiora 提交于
There should be no more problems during SjLj pass
-
由 Adolfo Ochagavía 提交于
This also removes checks in other methods of `CString` Breaking changes: * `CString::new` now fails if `buf` is null. To avoid this add a check before creatng a new `CString` . * The `is_null` and `is_not_null` methods are deprecated, because a `CString` cannot be null. * Other methods which used to fail if the `CString` was null do not fail anymore [breaking-change]
-
由 Adolfo Ochagavía 提交于
We use use `from_utf8_lossy` to convert it to a MaybeOwned string, to avoid failing in case the CString contains invalid UTF-8
-
由 Adolfo Ochagavía 提交于
-
由 Adolfo Ochagavía 提交于
-
由 Adolfo Ochagavía 提交于
-
由 Adolfo Ochagavía 提交于
Replaced by `string::raw::from_parts` [breaking-change]
-
由 Adolfo Ochagavía 提交于
Replaced by `string::raw::from_buf_len` [breaking-change]
-
由 Adolfo Ochagavía 提交于
Use `string:raw::from_utf8` instead [breaking-change]
-
由 Adolfo Ochagavía 提交于
Replaced by `string::raw::from_utf8` [breaking-change]
-
由 Adolfo Ochagavía 提交于
Use `string::raw::from_buf` instead [breaking-change]
-
由 Adolfo Ochagavía 提交于
This trait was only implemented by `String`. It provided the methods `into_bytes` and `append`, both of which **are already implemented as normal methods** of `String` (not as trait methods). This change improves the consistency of strings. This shouldn't break any code, except if somebody has implemented `OwnedStr` for a user-defined type.
-
由 bors 提交于
Add examples to methods.
-
由 bors 提交于
The allocas used in match expression currently don't get good lifetime markers, in fact they only get lifetime start markers, because their lifetimes don't match to cleanup scopes. While the bindings themselves are bog standard and just need a matching pair of start and end markers, they might need them twice, once for a guard clause and once for the match body. The __llmatch alloca OTOH needs a single lifetime start marker, but when there's a guard clause, it needs two end markers, because its lifetime ends either when the guard doesn't match or after the match body. With these intrinsics in place, LLVM can now, for example, optimize code like this: ````rust enum E { A1(int), A2(int), A3(int), A4(int), } pub fn variants(x: E) { match x { A1(m) => bar(&m), A2(m) => bar(&m), A3(m) => bar(&m), A4(m) => bar(&m), } } ```` To a single call to bar, using only a single stack slot. It still fails to eliminate some of checks. ````gas .Ltmp5: .cfi_def_cfa_offset 16 movb (%rdi), %al testb %al, %al je .LBB3_5 movzbl %al, %eax cmpl $1, %eax je .LBB3_5 cmpl $2, %eax .LBB3_5: movq 8(%rdi), %rax movq %rax, (%rsp) leaq (%rsp), %rdi callq _ZN3bar20hcb7a0d8be8e17e37daaE@PLT popq %rax retq ```` Refs #15665
-
由 Jonas Hietala 提交于
-
由 Jonas Hietala 提交于
-
由 bors 提交于
Tested this on the playground, the range specifies range(0u, 3), so it should be okay to remove this cast.
-
由 bors 提交于
Fixed #15774.
-
由 bors 提交于
Semaphores are not currently designed to handle this case correctly, leading to very strange behavior. Semaphores as written are intended to count *resources* and it's not possible to have a negative number of resources. This alters the behavior and documentation to note that the task will be failed if the initial count is 0. Closes #15758
-
由 bors 提交于
At the moment, writing generic functions for integer types that involve shifting is rather verbose. For example, a function at shifts an integer left by 1 currently requires use std::num::One; fn f<T: Int>(x : T) -> T { x << One::one() } If the shift amount is not 1, it's even worse: use std::num::FromPrimitive; fn f<T: Int + FromPrimitive>(x: T) -> T { x << FromPrimitive::from_int(2).unwrap() } This patch allows the much simpler implementation fn f<T: Int>(x: T) -> T { x << 2 } It accomplishes this by changing the built-in integer types (and the `Int` trait) to implement `Shl<uint, T>` instead of `Shl<T, T>` as it currently is defined. Note that the internal implementations of `shl` already cast the right-hand side to `uint`. `BigInt` also implements `Shl<uint, BigInt>`, so this increases consistency. All of the above applies similarly to right shifts, i.e., `Shr<uint, T>`.
-
由 bors 提交于
This fixes naming conventions for `push`/`pop` from either end of a structure by partially implementing @erickt's suggestion from https://github.com/rust-lang/rust/issues/10852#issuecomment-30823343, namely: * push/pop from the 'back' are called `push` and `pop`. * push/pop from the 'front' are called `push_front` and `pop_front`. * `push`/`pop` are declared on the `MutableSeq` trait. * Implement `MutableSeq` for `Vec`, `DList`, and `RingBuf`. * Add `MutableSeq` to the prelude. I did not make any further refactorings because there is some more extensive thought that needs to be put into the collections traits. This is an easy first step that should close https://github.com/rust-lang/rust/issues/10852. I left the `push_back` and `pop_back` methods on `DList` and `RingBuf` deprecated. Because `MutableSeq` is in the prelude it shouldn't break many, but it is a breaking change.
-
由 Brian Anderson 提交于
-
由 Brian Anderson 提交于
-
由 Brian Anderson 提交于
-
由 Brian Anderson 提交于
-
由 Brian Anderson 提交于
Use insert/remove instead.
-
由 Brian Anderson 提交于
-
由 Brian Anderson 提交于
-
由 Brian Anderson 提交于
-