Skip to content

R
rt-thread

ihbai / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 554d5bd8 编写于 作者: B bernard 提交者： Gitee
浏览文件
操作

!327 增加bsp工程hc32l136 

Merge pull request !327 from ching/pjq_hc32l13x
上级 1e663b72 d0c0e4e6
展开全部 隐藏空白更改
内联 并排
Showing with 88578 addition and 0 deletion
bsp/hc32l136/.config 0 → 100644
浏览文件 @ 554d5bd8
#
# Automatically generated file; DO NOT EDIT.
# RT-Thread Project Configuration
#
#
# RT-Thread Kernel
#
CONFIG_RT_NAME_MAX=8
# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
# CONFIG_RT_USING_SMP is not set
CONFIG_RT_ALIGN_SIZE=4
# CONFIG_RT_THREAD_PRIORITY_8 is not set
CONFIG_RT_THREAD_PRIORITY_32=y
# CONFIG_RT_THREAD_PRIORITY_256 is not set
CONFIG_RT_THREAD_PRIORITY_MAX=32
CONFIG_RT_TICK_PER_SECOND=1000
CONFIG_RT_USING_OVERFLOW_CHECK=y
CONFIG_RT_USING_HOOK=y
CONFIG_RT_USING_IDLE_HOOK=y
CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
CONFIG_IDLE_THREAD_STACK_SIZE=256
CONFIG_RT_USING_TIMER_SOFT=y
CONFIG_RT_TIMER_THREAD_PRIO=4
CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
#
# kservice optimization
#
# CONFIG_RT_KSERVICE_USING_STDLIB is not set
# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
CONFIG_RT_DEBUG=y
# CONFIG_RT_DEBUG_COLOR is not set
# CONFIG_RT_DEBUG_INIT_CONFIG is not set
# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
# CONFIG_RT_DEBUG_IPC_CONFIG is not set
# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
# CONFIG_RT_DEBUG_MEM_CONFIG is not set
# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
#
# Inter-Thread communication
#
CONFIG_RT_USING_SEMAPHORE=y
CONFIG_RT_USING_MUTEX=y
CONFIG_RT_USING_EVENT=y
CONFIG_RT_USING_MAILBOX=y
CONFIG_RT_USING_MESSAGEQUEUE=y
# CONFIG_RT_USING_SIGNALS is not set
#
# Memory Management
#
CONFIG_RT_USING_MEMPOOL=y
# CONFIG_RT_USING_MEMHEAP is not set
# CONFIG_RT_USING_NOHEAP is not set
CONFIG_RT_USING_SMALL_MEM=y
# CONFIG_RT_USING_SLAB is not set
# CONFIG_RT_USING_USERHEAP is not set
# CONFIG_RT_USING_MEMTRACE is not set
CONFIG_RT_USING_HEAP=y
#
# Kernel Device Object
#
CONFIG_RT_USING_DEVICE=y
# CONFIG_RT_USING_DEVICE_OPS is not set
# CONFIG_RT_USING_INTERRUPT_INFO is not set
CONFIG_RT_USING_CONSOLE=y
CONFIG_RT_CONSOLEBUF_SIZE=128
CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
# CONFIG_RT_PRINTF_LONGLONG is not set
CONFIG_RT_VER_NUM=0x40003
CONFIG_ARCH_ARM=y
# CONFIG_RT_USING_CPU_FFS is not set
CONFIG_ARCH_ARM_CORTEX_M=y
CONFIG_ARCH_ARM_CORTEX_M0=y
# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
#
# RT-Thread Components
#
CONFIG_RT_USING_COMPONENTS_INIT=y
CONFIG_RT_USING_USER_MAIN=y
CONFIG_RT_MAIN_THREAD_STACK_SIZE=512
CONFIG_RT_MAIN_THREAD_PRIORITY=10
#
# C++ features
#
# CONFIG_RT_USING_CPLUSPLUS is not set
#
# Command shell
#
CONFIG_RT_USING_FINSH=y
CONFIG_FINSH_THREAD_NAME="tshell"
CONFIG_FINSH_USING_HISTORY=y
CONFIG_FINSH_HISTORY_LINES=5
CONFIG_FINSH_USING_SYMTAB=y
CONFIG_FINSH_USING_DESCRIPTION=y
# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
CONFIG_FINSH_THREAD_PRIORITY=20
CONFIG_FINSH_THREAD_STACK_SIZE=512
CONFIG_FINSH_CMD_SIZE=80
# CONFIG_FINSH_USING_AUTH is not set
CONFIG_FINSH_USING_MSH=y
CONFIG_FINSH_USING_MSH_DEFAULT=y
# CONFIG_FINSH_USING_MSH_ONLY is not set
CONFIG_FINSH_ARG_MAX=10
#
# Device virtual file system
#
# CONFIG_RT_USING_DFS is not set
#
# Device Drivers
#
CONFIG_RT_USING_DEVICE_IPC=y
CONFIG_RT_PIPE_BUFSZ=512
# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
CONFIG_RT_USING_SERIAL=y
# CONFIG_RT_SERIAL_USING_DMA is not set
CONFIG_RT_SERIAL_RB_BUFSZ=64
# CONFIG_RT_USING_CAN is not set
# CONFIG_RT_USING_HWTIMER is not set
# CONFIG_RT_USING_CPUTIME is not set
# CONFIG_RT_USING_I2C is not set
# CONFIG_RT_USING_PHY is not set
CONFIG_RT_USING_PIN=y
# CONFIG_RT_USING_ADC is not set
# CONFIG_RT_USING_DAC is not set
# CONFIG_RT_USING_PWM is not set
# CONFIG_RT_USING_MTD_NOR is not set
# CONFIG_RT_USING_MTD_NAND is not set
# CONFIG_RT_USING_PM is not set
# CONFIG_RT_USING_RTC is not set
# CONFIG_RT_USING_SDIO is not set
# CONFIG_RT_USING_SPI is not set
# CONFIG_RT_USING_WDT is not set
# CONFIG_RT_USING_AUDIO is not set
# CONFIG_RT_USING_SENSOR is not set
# CONFIG_RT_USING_TOUCH is not set
# CONFIG_RT_USING_HWCRYPTO is not set
# CONFIG_RT_USING_PULSE_ENCODER is not set
# CONFIG_RT_USING_INPUT_CAPTURE is not set
# CONFIG_RT_USING_WIFI is not set
#
# Using USB
#
# CONFIG_RT_USING_USB_HOST is not set
# CONFIG_RT_USING_USB_DEVICE is not set
#
# POSIX layer and C standard library
#
# CONFIG_RT_USING_LIBC is not set
# CONFIG_RT_USING_PTHREADS is not set
# CONFIG_RT_LIBC_USING_TIME is not set
#
# Network
#
#
# Socket abstraction layer
#
# CONFIG_RT_USING_SAL is not set
#
# Network interface device
#
# CONFIG_RT_USING_NETDEV is not set
#
# light weight TCP/IP stack
#
# CONFIG_RT_USING_LWIP is not set
#
# AT commands
#
# CONFIG_RT_USING_AT is not set
#
# VBUS(Virtual Software BUS)
#
# CONFIG_RT_USING_VBUS is not set
#
# Utilities
#
# CONFIG_RT_USING_RYM is not set
# CONFIG_RT_USING_ULOG is not set
# CONFIG_RT_USING_UTEST is not set
# CONFIG_RT_USING_LWP is not set
#
# RT-Thread online packages
#
#
# IoT - internet of things
#
# CONFIG_PKG_USING_LORAWAN_DRIVER is not set
# CONFIG_PKG_USING_PAHOMQTT is not set
# CONFIG_PKG_USING_UMQTT is not set
# CONFIG_PKG_USING_WEBCLIENT is not set
# CONFIG_PKG_USING_WEBNET is not set
# CONFIG_PKG_USING_MONGOOSE is not set
# CONFIG_PKG_USING_MYMQTT is not set
# CONFIG_PKG_USING_KAWAII_MQTT is not set
# CONFIG_PKG_USING_BC28_MQTT is not set
# CONFIG_PKG_USING_WEBTERMINAL is not set
# CONFIG_PKG_USING_CJSON is not set
# CONFIG_PKG_USING_JSMN is not set
# CONFIG_PKG_USING_LIBMODBUS is not set
# CONFIG_PKG_USING_FREEMODBUS is not set
# CONFIG_PKG_USING_LJSON is not set
# CONFIG_PKG_USING_EZXML is not set
# CONFIG_PKG_USING_NANOPB is not set
#
# Wi-Fi
#
#
# Marvell WiFi
#
# CONFIG_PKG_USING_WLANMARVELL is not set
#
# Wiced WiFi
#
# CONFIG_PKG_USING_WLAN_WICED is not set
# CONFIG_PKG_USING_RW007 is not set
# CONFIG_PKG_USING_COAP is not set
# CONFIG_PKG_USING_NOPOLL is not set
# CONFIG_PKG_USING_NETUTILS is not set
# CONFIG_PKG_USING_CMUX is not set
# CONFIG_PKG_USING_PPP_DEVICE is not set
# CONFIG_PKG_USING_AT_DEVICE is not set
# CONFIG_PKG_USING_ATSRV_SOCKET is not set
# CONFIG_PKG_USING_WIZNET is not set
# CONFIG_PKG_USING_ZB_COORDINATOR is not set
#
# IoT Cloud
#
# CONFIG_PKG_USING_ONENET is not set
# CONFIG_PKG_USING_GAGENT_CLOUD is not set
# CONFIG_PKG_USING_ALI_IOTKIT is not set
# CONFIG_PKG_USING_AZURE is not set
# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set
# CONFIG_PKG_USING_JIOT-C-SDK is not set
# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
# CONFIG_PKG_USING_JOYLINK is not set
# CONFIG_PKG_USING_NIMBLE is not set
# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
# CONFIG_PKG_USING_IPMSG is not set
# CONFIG_PKG_USING_LSSDP is not set
# CONFIG_PKG_USING_AIRKISS_OPEN is not set
# CONFIG_PKG_USING_LIBRWS is not set
# CONFIG_PKG_USING_TCPSERVER is not set
# CONFIG_PKG_USING_PROTOBUF_C is not set
# CONFIG_PKG_USING_DLT645 is not set
# CONFIG_PKG_USING_QXWZ is not set
# CONFIG_PKG_USING_SMTP_CLIENT is not set
# CONFIG_PKG_USING_ABUP_FOTA is not set
# CONFIG_PKG_USING_LIBCURL2RTT is not set
# CONFIG_PKG_USING_CAPNP is not set
# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
# CONFIG_PKG_USING_AGILE_TELNET is not set
# CONFIG_PKG_USING_NMEALIB is not set
# CONFIG_PKG_USING_AGILE_JSMN is not set
# CONFIG_PKG_USING_PDULIB is not set
# CONFIG_PKG_USING_BTSTACK is not set
# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
# CONFIG_PKG_USING_MAVLINK is not set
# CONFIG_PKG_USING_RAPIDJSON is not set
# CONFIG_PKG_USING_BSAL is not set
# CONFIG_PKG_USING_AGILE_MODBUS is not set
# CONFIG_PKG_USING_AGILE_FTP is not set
# CONFIG_PKG_USING_EMBEDDEDPROTO is not set
# CONFIG_PKG_USING_RT_LINK_HW is not set
#
# security packages
#
# CONFIG_PKG_USING_MBEDTLS is not set
# CONFIG_PKG_USING_libsodium is not set
# CONFIG_PKG_USING_TINYCRYPT is not set
# CONFIG_PKG_USING_TFM is not set
# CONFIG_PKG_USING_YD_CRYPTO is not set
#
# language packages
#
# CONFIG_PKG_USING_LUA is not set
# CONFIG_PKG_USING_JERRYSCRIPT is not set
# CONFIG_PKG_USING_MICROPYTHON is not set
#
# multimedia packages
#
# CONFIG_PKG_USING_OPENMV is not set
# CONFIG_PKG_USING_MUPDF is not set
# CONFIG_PKG_USING_STEMWIN is not set
# CONFIG_PKG_USING_WAVPLAYER is not set
# CONFIG_PKG_USING_TJPGD is not set
# CONFIG_PKG_USING_PDFGEN is not set
# CONFIG_PKG_USING_HELIX is not set
# CONFIG_PKG_USING_AZUREGUIX is not set
# CONFIG_PKG_USING_TOUCHGFX2RTT is not set
# CONFIG_PKG_USING_NUEMWIN is not set
# CONFIG_PKG_USING_MP3PLAYER is not set
# CONFIG_PKG_USING_TINYJPEG is not set
#
# tools packages
#
# CONFIG_PKG_USING_CMBACKTRACE is not set
# CONFIG_PKG_USING_EASYFLASH is not set
# CONFIG_PKG_USING_EASYLOGGER is not set
# CONFIG_PKG_USING_SYSTEMVIEW is not set
# CONFIG_PKG_USING_SEGGER_RTT is not set
# CONFIG_PKG_USING_RDB is not set
# CONFIG_PKG_USING_QRCODE is not set
# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
# CONFIG_PKG_USING_ULOG_FILE is not set
# CONFIG_PKG_USING_LOGMGR is not set
# CONFIG_PKG_USING_ADBD is not set
# CONFIG_PKG_USING_COREMARK is not set
# CONFIG_PKG_USING_DHRYSTONE is not set
# CONFIG_PKG_USING_MEMORYPERF is not set
# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
# CONFIG_PKG_USING_BS8116A is not set
# CONFIG_PKG_USING_GPS_RMC is not set
# CONFIG_PKG_USING_URLENCODE is not set
# CONFIG_PKG_USING_UMCN is not set
# CONFIG_PKG_USING_LWRB2RTT is not set
# CONFIG_PKG_USING_CPU_USAGE is not set
# CONFIG_PKG_USING_GBK2UTF8 is not set
# CONFIG_PKG_USING_VCONSOLE is not set
# CONFIG_PKG_USING_KDB is not set
# CONFIG_PKG_USING_WAMR is not set
# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set
# CONFIG_PKG_USING_LWLOG is not set
# CONFIG_PKG_USING_ANV_TRACE is not set
# CONFIG_PKG_USING_ANV_MEMLEAK is not set
# CONFIG_PKG_USING_ANV_TESTSUIT is not set
# CONFIG_PKG_USING_ANV_BENCH is not set
# CONFIG_PKG_USING_DEVMEM is not set
# CONFIG_PKG_USING_REGEX is not set
# CONFIG_PKG_USING_MEM_SANDBOX is not set
# CONFIG_PKG_USING_SOLAR_TERMS is not set
# CONFIG_PKG_USING_GAN_ZHI is not set
#
# system packages
#
#
# acceleration: Assembly language or algorithmic acceleration packages
#
# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
# CONFIG_PKG_USING_QFPLIB_M3 is not set
#
# Micrium: Micrium software products porting for RT-Thread
#
# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
# CONFIG_PKG_USING_UC_CRC is not set
# CONFIG_PKG_USING_UC_CLK is not set
# CONFIG_PKG_USING_UC_COMMON is not set
# CONFIG_PKG_USING_UC_MODBUS is not set
# CONFIG_PKG_USING_GUIENGINE is not set
# CONFIG_PKG_USING_CAIRO is not set
# CONFIG_PKG_USING_PIXMAN is not set
# CONFIG_PKG_USING_PARTITION is not set
# CONFIG_PKG_USING_FAL is not set
# CONFIG_PKG_USING_FLASHDB is not set
# CONFIG_PKG_USING_SQLITE is not set
# CONFIG_PKG_USING_RTI is not set
# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
# CONFIG_PKG_USING_CMSIS is not set
# CONFIG_PKG_USING_DFS_YAFFS is not set
# CONFIG_PKG_USING_LITTLEFS is not set
# CONFIG_PKG_USING_DFS_JFFS2 is not set
# CONFIG_PKG_USING_DFS_UFFS is not set
# CONFIG_PKG_USING_LWEXT4 is not set
# CONFIG_PKG_USING_THREAD_POOL is not set
# CONFIG_PKG_USING_ROBOTS is not set
# CONFIG_PKG_USING_EV is not set
# CONFIG_PKG_USING_SYSWATCH is not set
# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
# CONFIG_PKG_USING_PLCCORE is not set
# CONFIG_PKG_USING_RAMDISK is not set
# CONFIG_PKG_USING_MININI is not set
# CONFIG_PKG_USING_QBOOT is not set
# CONFIG_PKG_USING_PPOOL is not set
# CONFIG_PKG_USING_OPENAMP is not set
# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
# CONFIG_PKG_USING_LPM is not set
# CONFIG_PKG_USING_TLSF is not set
# CONFIG_PKG_USING_EVENT_RECORDER is not set
#
# peripheral libraries and drivers
#
# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
# CONFIG_PKG_USING_REALTEK_AMEBA is not set
# CONFIG_PKG_USING_SHT2X is not set
# CONFIG_PKG_USING_SHT3X is not set
# CONFIG_PKG_USING_AS7341 is not set
# CONFIG_PKG_USING_STM32_SDIO is not set
# CONFIG_PKG_USING_ICM20608 is not set
# CONFIG_PKG_USING_U8G2 is not set
# CONFIG_PKG_USING_BUTTON is not set
# CONFIG_PKG_USING_PCF8574 is not set
# CONFIG_PKG_USING_SX12XX is not set
# CONFIG_PKG_USING_SIGNAL_LED is not set
# CONFIG_PKG_USING_LEDBLINK is not set
# CONFIG_PKG_USING_LITTLED is not set
# CONFIG_PKG_USING_LKDGUI is not set
# CONFIG_PKG_USING_NRF5X_SDK is not set
# CONFIG_PKG_USING_NRFX is not set
# CONFIG_PKG_USING_WM_LIBRARIES is not set
# CONFIG_PKG_USING_KENDRYTE_SDK is not set
# CONFIG_PKG_USING_INFRARED is not set
# CONFIG_PKG_USING_AGILE_BUTTON is not set
# CONFIG_PKG_USING_AGILE_LED is not set
# CONFIG_PKG_USING_AT24CXX is not set
# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
# CONFIG_PKG_USING_AD7746 is not set
# CONFIG_PKG_USING_PCA9685 is not set
# CONFIG_PKG_USING_I2C_TOOLS is not set
# CONFIG_PKG_USING_NRF24L01 is not set
# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
# CONFIG_PKG_USING_MAX17048 is not set
# CONFIG_PKG_USING_RPLIDAR is not set
# CONFIG_PKG_USING_AS608 is not set
# CONFIG_PKG_USING_RC522 is not set
# CONFIG_PKG_USING_WS2812B is not set
# CONFIG_PKG_USING_EMBARC_BSP is not set
# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
# CONFIG_PKG_USING_MULTI_RTIMER is not set
# CONFIG_PKG_USING_MAX7219 is not set
# CONFIG_PKG_USING_BEEP is not set
# CONFIG_PKG_USING_EASYBLINK is not set
# CONFIG_PKG_USING_PMS_SERIES is not set
# CONFIG_PKG_USING_CAN_YMODEM is not set
# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set
# CONFIG_PKG_USING_QLED is not set
# CONFIG_PKG_USING_PAJ7620 is not set
# CONFIG_PKG_USING_AGILE_CONSOLE is not set
# CONFIG_PKG_USING_LD3320 is not set
# CONFIG_PKG_USING_WK2124 is not set
# CONFIG_PKG_USING_LY68L6400 is not set
# CONFIG_PKG_USING_DM9051 is not set
# CONFIG_PKG_USING_SSD1306 is not set
# CONFIG_PKG_USING_QKEY is not set
# CONFIG_PKG_USING_RS485 is not set
# CONFIG_PKG_USING_NES is not set
# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
# CONFIG_PKG_USING_VDEVICE is not set
# CONFIG_PKG_USING_SGM706 is not set
# CONFIG_PKG_USING_STM32WB55_SDK is not set
# CONFIG_PKG_USING_RDA58XX is not set
# CONFIG_PKG_USING_LIBNFC is not set
# CONFIG_PKG_USING_MFOC is not set
# CONFIG_PKG_USING_TMC51XX is not set
# CONFIG_PKG_USING_TCA9534 is not set
# CONFIG_PKG_USING_KOBUKI is not set
# CONFIG_PKG_USING_ROSSERIAL is not set
# CONFIG_PKG_USING_MICRO_ROS is not set
# CONFIG_PKG_USING_MCP23008 is not set
#
# AI packages
#
# CONFIG_PKG_USING_LIBANN is not set
# CONFIG_PKG_USING_NNOM is not set
# CONFIG_PKG_USING_ONNX_BACKEND is not set
# CONFIG_PKG_USING_ONNX_PARSER is not set
# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
# CONFIG_PKG_USING_ELAPACK is not set
# CONFIG_PKG_USING_ULAPACK is not set
# CONFIG_PKG_USING_QUEST is not set
# CONFIG_PKG_USING_NAXOS is not set
#
# miscellaneous packages
#
# CONFIG_PKG_USING_LIBCSV is not set
# CONFIG_PKG_USING_OPTPARSE is not set
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_LZMA is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
# CONFIG_PKG_USING_CANFESTIVAL is not set
# CONFIG_PKG_USING_ZLIB is not set
# CONFIG_PKG_USING_MINIZIP is not set
# CONFIG_PKG_USING_DSTR is not set
# CONFIG_PKG_USING_TINYFRAME is not set
# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
# CONFIG_PKG_USING_DIGITALCTRL is not set
# CONFIG_PKG_USING_UPACKER is not set
# CONFIG_PKG_USING_UPARAM is not set
#
# samples: kernel and components samples
#
# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
# CONFIG_PKG_USING_HELLO is not set
# CONFIG_PKG_USING_VI is not set
# CONFIG_PKG_USING_KI is not set
# CONFIG_PKG_USING_ARMv7M_DWT is not set
# CONFIG_PKG_USING_VT100 is not set
# CONFIG_PKG_USING_UKAL is not set
# CONFIG_PKG_USING_CRCLIB is not set
#
# entertainment: terminal games and other interesting software packages
#
# CONFIG_PKG_USING_THREES is not set
# CONFIG_PKG_USING_2048 is not set
# CONFIG_PKG_USING_SNAKE is not set
# CONFIG_PKG_USING_TETRIS is not set
# CONFIG_PKG_USING_DONUT is not set
# CONFIG_PKG_USING_ACLOCK is not set
# CONFIG_PKG_USING_LWGPS is not set
# CONFIG_PKG_USING_STATE_MACHINE is not set
# CONFIG_PKG_USING_MCURSES is not set
# CONFIG_PKG_USING_COWSAY is not set
#
# Hardware Drivers Config
#
CONFIG_MCU_HC32L136=y
#
# Onboard Peripheral Drivers
#
#
# On-chip Peripheral Drivers
#
CONFIG_BSP_USING_GPIO=y
CONFIG_BSP_USING_UART=y
# CONFIG_BSP_USING_UART0 is not set
CONFIG_BSP_USING_UART1=y
# CONFIG_BSP_USING_I2C1 is not set
#
# Board extended module Drivers
#
bsp/hc32l136/.ignore_format.yml 0 → 100644
浏览文件 @ 554d5bd8
# files format check exclude path, please follow the instructions below to modify;
# If you need to exclude an entire folder, add the folder path in dir_path;
# If you need to exclude a file, add the path to the file in file_path.
file_path:
dir_path:
- libraries
\ No newline at end of file
bsp/hc32l136/Kconfig 0 → 100644
浏览文件 @ 554d5bd8
mainmenu "RT-Thread Project Configuration"
config BSP_DIR
string
option env="BSP_ROOT"
default "."
config RTT_DIR
string
option env="RTT_ROOT"
default "../.."
config PKGS_DIR
string
option env="PKGS_ROOT"
default "packages"
source "$RTT_DIR/Kconfig"
source "$PKGS_DIR/Kconfig"
source "board/Kconfig"
bsp/hc32l136/Libraries/CMSIS/Device/HDSC/HC32L136/Include/base_types.h 0 → 100644
浏览文件 @ 554d5bd8
/******************************************************************************
* Copyright (C) 2017, Huada Semiconductor Co.,Ltd All rights reserved.
*
* This software is owned and published by:
* Huada Semiconductor Co.,Ltd ("HDSC").
*
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
*
* This software contains source code for use with HDSC
* components. This software is licensed by HDSC to be adapted only
* for use in systems utilizing HDSC components. HDSC shall not be
* responsible for misuse or illegal use of this software for devices not
* supported herein. HDSC is providing this software "AS IS" and will
* not be responsible for issues arising from incorrect user implementation
* of the software.
*
* Disclaimer:
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
* WARRANTY OF NONINFRINGEMENT.
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
* SAVINGS OR PROFITS,
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
* FROM, THE SOFTWARE.
*
* This software may be replicated in part or whole for the licensed use,
* with the restriction that this Disclaimer and Copyright notice must be
* included with each copy of this software, whether used in part or whole,
* at all times.
*/
/******************************************************************************/
/** \file base_types.h
**
** base type common define.
** @link SampleGroup Some description @endlink
**
** - 2018-03-09 1.0 Lux First version.
**
******************************************************************************/
#ifndef __BASE_TYPES_H__
#define __BASE_TYPES_H__
/*****************************************************************************/
/* Include files */
/*****************************************************************************/
#include <stdio.h>
#include <string.h>
#include <stddef.h>
#include <stdint.h>
#include <assert.h>
/*****************************************************************************/
/* Global pre-processor symbols/macros ('#define') */
/*****************************************************************************/
#ifndef TRUE
/** Value is true (boolean_t type) */
#define TRUE ((boolean_t) 1u)
#endif
#ifndef FALSE
/** Value is false (boolean_t type) */
#define FALSE ((boolean_t) 0u)
#endif
#if defined (__ICCARM__)
#define __WEAKDEF __WEAK __ATTRIBUTES
#elif defined (__CC_ARM)
#define __WEAKDEF __weak
#else
#error "unsupported compiler!!"
#endif
/** Returns the minimum value out of two values */
#define MINIMUM( X, Y ) ((X) < (Y) ? (X) : (Y))
/** Returns the maximum value out of two values */
#define MAXIMUM( X, Y ) ((X) > (Y) ? (X) : (Y))
/** Returns the dimension of an array */
#define ARRAY_SZ( X ) (sizeof(X) / sizeof((X)[0]))
#ifdef __DEBUG_ASSERT
#define ASSERT(x) do{ assert((x)> 0u) ; }while(0);
#else
#define ASSERT(x) {}
#endif
/******************************************************************************
* Global type definitions
******************************************************************************/
/** logical datatype (only values are TRUE and FALSE) */
typedef uint8_t boolean_t;
/** single precision floating point number (4 byte) */
typedef float float32_t;
/** double precision floating point number (8 byte) */
typedef double float64_t;
/** ASCII character for string generation (8 bit) */
typedef char char_t;
/** function pointer type to void/void function */
typedef void (*func_ptr_t)(void);
/** function pointer type to void/uint8_t function */
typedef void (*func_ptr_arg1_t)(uint8_t u8Param);
/** generic error codes */
typedef enum en_result
{
Ok = 0u, ///< No error
Error = 1u, ///< Non-specific error code
ErrorAddressAlignment = 2u, ///< Address alignment does not match
ErrorAccessRights = 3u, ///< Wrong mode (e.g. user/system) mode is set
ErrorInvalidParameter = 4u, ///< Provided parameter is not valid
ErrorOperationInProgress = 5u, ///< A conflicting or requested operation is still in progress
ErrorInvalidMode = 6u, ///< Operation not allowed in current mode
ErrorUninitialized = 7u, ///< Module (or part of it) was not initialized properly
ErrorBufferFull = 8u, ///< Circular buffer can not be written because the buffer is full
ErrorTimeout = 9u, ///< Time Out error occurred (e.g. I2C arbitration lost, Flash time-out, etc.)
ErrorNotReady = 10u, ///< A requested final state is not reached
OperationInProgress = 11u ///< Indicator for operation in progress
} en_result_t;
/*****************************************************************************/
/* Global variable declarations ('extern', definition in C source) */
/*****************************************************************************/
/*****************************************************************************/
/* Global function prototypes ('extern', definition in C source) */
/*****************************************************************************/
#endif /* __BASE_TYPES_H__ */
/******************************************************************************/
/* EOF (not truncated) */
/******************************************************************************/
bsp/hc32l136/Libraries/CMSIS/Device/HDSC/HC32L136/Include/board_stkhc32l13x.h 0 → 100644
浏览文件 @ 554d5bd8
/******************************************************************************
* Copyright (C) 2017, Huada Semiconductor Co.,Ltd All rights reserved.
*
* This software is owned and published by:
* Huada Semiconductor Co.,Ltd ("HDSC").
*
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
*
* This software contains source code for use with HDSC
* components. This software is licensed by HDSC to be adapted only
* for use in systems utilizing HDSC components. HDSC shall not be
* responsible for misuse or illegal use of this software for devices not
* supported herein. HDSC is providing this software "AS IS" and will
* not be responsible for issues arising from incorrect user implementation
* of the software.
*
* Disclaimer:
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
* WARRANTY OF NONINFRINGEMENT.
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
* SAVINGS OR PROFITS,
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
* FROM, THE SOFTWARE.
*
* This software may be replicated in part or whole for the licensed use,
* with the restriction that this Disclaimer and Copyright notice must be
* included with each copy of this software, whether used in part or whole,
* at all times.
*/
/******************************************************************************/
/** \file stkhc32l13x.h
**
** stk board common define.
** @link SampleGroup Some description @endlink
**
** - 2018-03-09 1.0 Lux First version.
**
******************************************************************************/
#ifndef __BOARD_STKHC32L13X_H__
#define __BOARD_STKHC32L13X_H__
///< STK GPIO DEFINE
///< USER KEY
#define STK_USER_PORT GpioPortD
#define STK_USER_PIN GpioPin4
///< LED
#define STK_LED_PORT GpioPortD
#define STK_LED_PIN GpioPin5
///< XTH
#define SYSTEM_XTH (32*1000*1000u) ///< 32MHz
#define STK_XTHI_PORT GpioPortD
#define STK_XTHI_PIN GpioPin0
#define STK_XTHO_PORT GpioPortD
#define STK_XTHO_PIN GpioPin1
///< XTL
#define SYSTEM_XTL (32768u) ///< 32768Hz
#define STK_XTLI_PORT GpioPortC
#define STK_XTLI_PIN GpioPin14
#define STK_XTLO_PORT GpioPortC
#define STK_XTLO_PIN GpioPin15
///< LCD
#define STK_LCD_COM0_PORT GpioPortA
#define STK_LCD_COM0_PIN GpioPin9
#define STK_LCD_COM1_PORT GpioPortA
#define STK_LCD_COM1_PIN GpioPin10
#define STK_LCD_COM2_PORT GpioPortA
#define STK_LCD_COM2_PIN GpioPin11
#define STK_LCD_COM3_PORT GpioPortA
#define STK_LCD_COM3_PIN GpioPin12
#define STK_LCD_SEG0_PORT GpioPortA
#define STK_LCD_SEG0_PIN GpioPin8
#define STK_LCD_SEG1_PORT GpioPortC
#define STK_LCD_SEG1_PIN GpioPin9
#define STK_LCD_SEG2_PORT GpioPortC
#define STK_LCD_SEG2_PIN GpioPin8
#define STK_LCD_SEG3_PORT GpioPortC
#define STK_LCD_SEG3_PIN GpioPin7
#define STK_LCD_SEG4_PORT GpioPortC
#define STK_LCD_SEG4_PIN GpioPin6
#define STK_LCD_SEG5_PORT GpioPortB
#define STK_LCD_SEG5_PIN GpioPin15
#define STK_LCD_SEG6_PORT GpioPortB
#define STK_LCD_SEG6_PIN GpioPin14
#define STK_LCD_SEG7_PORT GpioPortB
#define STK_LCD_SEG7_PIN GpioPin13
///< I2C EEPROM
#define EVB_I2C0_EEPROM_SCL_PORT GpioPortB
#define EVB_I2C0_EEPROM_SCL_PIN GpioPin6
#define EVB_I2C0_EEPROM_SDA_PORT GpioPortB
#define EVB_I2C0_EEPROM_SDA_PIN GpioPin7
///< SPI0
#define EVB_SPI0_FLASH_CS_PORT GpioPortE
#define EVB_SPI0_FLASH_CS_PIN GpioPin12
#define EVB_SPI0_FLASH_SCK_PORT GpioPortE
#define EVB_SPI0_FLASH_SCK_PIN GpioPin13
#define EVB_SPI0_FLASH_MISO_PORT GpioPortE
#define EVB_SPI0_FLASH_MISO_PIN GpioPin14
#define EVB_SPI0_FLASH_MOSI_PORT GpioPortE
#define EVB_SPI0_FLASH_MOSI_PIN GpioPin15
#endif
bsp/hc32l136/Libraries/CMSIS/Device/HDSC/HC32L136/Include/ddl_device.h 0 → 100644
浏览文件 @ 554d5bd8
/*******************************************************************************
* Copyright (C) 2018, Huada Semiconductor Co.,Ltd All rights reserved.
*
* This software is owned and published by:
* Huada Semiconductor Co.,Ltd ("HDSC").
*
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
*
* This software contains source code for use with HDSC
* components. This software is licensed by HDSC to be adapted only
* for use in systems utilizing HDSC components. HDSC shall not be
* responsible for misuse or illegal use of this software for devices not
* supported herein. HDSC is providing this software "AS IS" and will
* not be responsible for issues arising from incorrect user implementation
* of the software.
*
* Disclaimer:
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
* WARRANTY OF NONINFRINGEMENT.
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
* SAVINGS OR PROFITS,
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
* FROM, THE SOFTWARE.
*
* This software may be replicated in part or whole for the licensed use,
* with the restriction that this Disclaimer and Copyright notice must be
* included with each copy of this software, whether used in part or whole,
* at all times.
*/
/******************************************************************************/
/** \file ddl_device.h
**
** Device define
** @link SampleGroup Some description @endlink
**
** - 2018-04-15
**
*****************************************************************************/
#ifndef __DDL_DEVICE_H__
#define __DDL_DEVICE_H__
/**
*******************************************************************************
** \brief Global device series definition
**
** \note
******************************************************************************/
#define DDL_MCU_SERIES DDL_DEVICE_SERIES_HC32L13X
/**
*******************************************************************************
** \brief Global package definition
**
** \note This definition is used for device package settings
******************************************************************************/
#define DDL_MCU_PACKAGE DDL_DEVICE_PACKAGE_HC_K
#endif /* __DDL_DEVICE_H__ */
/*******************************************************************************
* EOF (not truncated)
******************************************************************************/
bsp/hc32l136/Libraries/CMSIS/Device/HDSC/HC32L136/Include/system_hc32l136.h 0 → 100644
浏览文件 @ 554d5bd8
/*******************************************************************************
* Copyright (C) 2018, Huada Semiconductor Co.,Ltd All rights reserved.
*
* This software is owned and published by:
* Huada Semiconductor Co.,Ltd ("HDSC").
*
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
*
* This software contains source code for use with HDSC
* components. This software is licensed by HDSC to be adapted only
* for use in systems utilizing HDSC components. HDSC shall not be
* responsible for misuse or illegal use of this software for devices not
* supported herein. HDSC is providing this software "AS IS" and will
* not be responsible for issues arising from incorrect user implementation
* of the software.
*
* Disclaimer:
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
* WARRANTY OF NONINFRINGEMENT.
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
* SAVINGS OR PROFITS,
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
* FROM, THE SOFTWARE.
*
* This software may be replicated in part or whole for the licensed use,
* with the restriction that this Disclaimer and Copyright notice must be
* included with each copy of this software, whether used in part or whole,
* at all times.
*/
/******************************************************************************/
/** \file system_hc32l136.h
**
** A detailed description is available at
** @link SampleGroup Some description @endlink
**
** - 2018-03-09 1.0 Lux First version.
**
******************************************************************************/
#ifndef __SYSTEM_HC32L136_H__
#define __SYSTEM_HC32L136_H__
/******************************************************************************/
/* Include files */
/******************************************************************************/
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/******************************************************************************/
/* Global pre-processor symbols/macros ('define') */
/******************************************************************************/
#define HWWD_DISABLE (1)
/**
******************************************************************************
** \brief Clock Setup macro definition
**
** - 0: CLOCK_SETTING_NONE - User provides own clock setting in application
** - 1: CLOCK_SETTING_CMSIS -
******************************************************************************/
#define CLOCK_SETTING_NONE 0u
#define CLOCK_SETTING_CMSIS 1u
/******************************************************************************/
/* */
/* START OF USER SETTINGS HERE */
/* =========================== */
/* */
/* All lines with '<<<' can be set by user. */
/* */
/******************************************************************************/
/******************************************************************************/
/* Global function prototypes ('extern', definition in C source) */
/******************************************************************************/
extern uint32_t SystemCoreClock; // System Clock Frequency (Core Clock)
extern void SystemInit (void); // Initialize the system
extern void SystemCoreClockUpdate (void); // Update SystemCoreClock variable
#ifdef __cplusplus
}
#endif
#endif /* __SYSTEM_HC32L136_H__ */
bsp/hc32l136/Libraries/CMSIS/Device/HDSC/HC32L136/Include/system_hc32l13x.h 0 → 100644
浏览文件 @ 554d5bd8
/*******************************************************************************
* Copyright (C) 2019, Huada Semiconductor Co.,Ltd All rights reserved.
*
* This software is owned and published by:
* Huada Semiconductor Co.,Ltd ("HDSC").
*
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
*
* This software contains source code for use with HDSC
* components. This software is licensed by HDSC to be adapted only
* for use in systems utilizing HDSC components. HDSC shall not be
* responsible for misuse or illegal use of this software for devices not
* supported herein. HDSC is providing this software "AS IS" and will
* not be responsible for issues arising from incorrect user implementation
* of the software.
*
* Disclaimer:
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
* WARRANTY OF NONINFRINGEMENT.
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
* SAVINGS OR PROFITS,
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
* FROM, THE SOFTWARE.
*
* This software may be replicated in part or whole for the licensed use,
* with the restriction that this Disclaimer and Copyright notice must be
* included with each copy of this software, whether used in part or whole,
* at all times.
*/
/******************************************************************************/
/** \file system_hc32l13x.h
**
** A detailed description is available at
** @link SampleGroup Some description @endlink
**
** - 2019-03-01 1.0 Lux First version.
**
******************************************************************************/
#ifndef __SYSTEM_HC32L13X_H__
#define __SYSTEM_HC32L13X_H__
/******************************************************************************/
/* Include files */
/******************************************************************************/
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/******************************************************************************/
/* Global pre-processor symbols/macros ('define') */
/******************************************************************************/
#define HWWD_DISABLE (1)
/**
******************************************************************************
** \brief Clock Setup macro definition
**
** - 0: CLOCK_SETTING_NONE - User provides own clock setting in application
** - 1: CLOCK_SETTING_CMSIS -
******************************************************************************/
#define CLOCK_SETTING_NONE 0u
#define CLOCK_SETTING_CMSIS 1u
/******************************************************************************/
/* */
/* START OF USER SETTINGS HERE */
/* =========================== */
/* */
/* All lines with '<<<' can be set by user. */
/* */
/******************************************************************************/
/******************************************************************************/
/* Global function prototypes ('extern', definition in C source) */
/******************************************************************************/
extern uint32_t SystemCoreClock; // System Clock Frequency (Core Clock)
extern void SystemInit (void); // Initialize the system
extern void SystemCoreClockUpdate (void); // Update SystemCoreClock variable
#ifdef __cplusplus
}
#endif
#endif /* __SYSTEM_HC32L13X_H__ */
bsp/hc32l136/Libraries/CMSIS/Device/HDSC/HC32L136/Source/ARM/startup_hc32l136.s 0 → 100644
浏览文件 @ 554d5bd8
;/******************************************************************************
;* Copyright (C) 2018, Huada Semiconductor Co.,Ltd All rights reserved.
;*
;* This software is owned and published by:
;* Huada Semiconductor Co.,Ltd ("HDSC").
;*
;* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
;* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
;*
;* This software contains source code for use with HDSC
;* components. This software is licensed by HDSC to be adapted only
;* for use in systems utilizing HDSC components. HDSC shall not be
;* responsible for misuse or illegal use of this software for devices not
;* supported herein. HDSC is providing this software "AS IS" and will
;* not be responsible for issues arising from incorrect user implementation
;* of the software.
;*
;* Disclaimer:
;* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
;* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
;* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
;* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
;* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
;* WARRANTY OF NONINFRINGEMENT.
;* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
;* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
;* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
;* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
;* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
;* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
;* SAVINGS OR PROFITS,
;* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
;* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
;* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
;* FROM, THE SOFTWARE.
;*
;* This software may be replicated in part or whole for the licensed use,
;* with the restriction that this Disclaimer and Copyright notice must be
;* included with each copy of this software, whether used in part or whole,
;* at all times.
;*/
;/*****************************************************************************/
;/*****************************************************************************/
;/* Startup for ARM */
;/* Version V1.0 */
;/* Date 2018-04-15 */
;/* Target-mcu {HC32L136} */
;/*****************************************************************************/
; Stack Configuration
; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
Stack_Size EQU 0x00000200
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; Heap Configuration
; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset
DCD NMI_Handler ; NMI
DCD HardFault_Handler ; Hard Fault
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV
DCD SysTick_Handler ; SysTick
DCD IRQ000_Handler ;
DCD IRQ001_Handler ;
DCD IRQ002_Handler ;
DCD IRQ003_Handler ;
DCD IRQ004_Handler ;
DCD IRQ005_Handler ;
DCD IRQ006_Handler ;
DCD IRQ007_Handler ;
DCD IRQ008_Handler ;
DCD IRQ009_Handler ;
DCD IRQ010_Handler ;
DCD IRQ011_Handler ;
DCD IRQ012_Handler ;
DCD IRQ013_Handler ;
DCD IRQ014_Handler ;
DCD IRQ015_Handler ;
DCD IRQ016_Handler ;
DCD IRQ017_Handler ;
DCD IRQ018_Handler ;
DCD IRQ019_Handler ;
DCD IRQ020_Handler ;
DCD IRQ021_Handler ;
DCD IRQ022_Handler ;
DCD IRQ023_Handler ;
DCD IRQ024_Handler ;
DCD IRQ025_Handler ;
DCD IRQ026_Handler ;
DCD IRQ027_Handler ;
DCD IRQ028_Handler ;
DCD IRQ029_Handler ;
DCD IRQ030_Handler ;
DCD IRQ031_Handler ;
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
;reset NVIC if in rom debug
LDR R0, =0x20000000
LDR R2, =0x0
MOVS R1, #0 ; for warning,
ADD R1, PC,#0 ; for A1609W,
CMP R1, R0
BLS RAMCODE
; ram code base address.
ADD R2, R0,R2
RAMCODE
; reset Vector table address.
LDR R0, =0xE000ED08
STR R2, [R0]
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT IRQ000_Handler [WEAK]
EXPORT IRQ001_Handler [WEAK]
EXPORT IRQ002_Handler [WEAK]
EXPORT IRQ003_Handler [WEAK]
EXPORT IRQ004_Handler [WEAK]
EXPORT IRQ005_Handler [WEAK]
EXPORT IRQ006_Handler [WEAK]
EXPORT IRQ007_Handler [WEAK]
EXPORT IRQ008_Handler [WEAK]
EXPORT IRQ009_Handler [WEAK]
EXPORT IRQ010_Handler [WEAK]
EXPORT IRQ011_Handler [WEAK]
EXPORT IRQ012_Handler [WEAK]
EXPORT IRQ013_Handler [WEAK]
EXPORT IRQ014_Handler [WEAK]
EXPORT IRQ015_Handler [WEAK]
EXPORT IRQ016_Handler [WEAK]
EXPORT IRQ017_Handler [WEAK]
EXPORT IRQ018_Handler [WEAK]
EXPORT IRQ019_Handler [WEAK]
EXPORT IRQ020_Handler [WEAK]
EXPORT IRQ021_Handler [WEAK]
EXPORT IRQ022_Handler [WEAK]
EXPORT IRQ023_Handler [WEAK]
EXPORT IRQ024_Handler [WEAK]
EXPORT IRQ025_Handler [WEAK]
EXPORT IRQ026_Handler [WEAK]
EXPORT IRQ027_Handler [WEAK]
EXPORT IRQ028_Handler [WEAK]
EXPORT IRQ029_Handler [WEAK]
EXPORT IRQ030_Handler [WEAK]
EXPORT IRQ031_Handler [WEAK]
IRQ000_Handler
IRQ001_Handler
IRQ002_Handler
IRQ003_Handler
IRQ004_Handler
IRQ005_Handler
IRQ006_Handler
IRQ007_Handler
IRQ008_Handler
IRQ009_Handler
IRQ010_Handler
IRQ011_Handler
IRQ012_Handler
IRQ013_Handler
IRQ014_Handler
IRQ015_Handler
IRQ016_Handler
IRQ017_Handler
IRQ018_Handler
IRQ019_Handler
IRQ020_Handler
IRQ021_Handler
IRQ022_Handler
IRQ023_Handler
IRQ024_Handler
IRQ025_Handler
IRQ026_Handler
IRQ027_Handler
IRQ028_Handler
IRQ029_Handler
IRQ030_Handler
IRQ031_Handler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
bsp/hc32l136/Libraries/CMSIS/Device/HDSC/HC32L136/Source/IAR/startup_hc32l136.s 0 → 100644
浏览文件 @ 554d5bd8
;*******************************************************************************
; Copyright (C) 2018, Huada Semiconductor Co.,Ltd All rights reserved.
;
; This software is owned and published by:
; Huada Semiconductor Co.,Ltd ("HDSC").
;
; BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
; BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
;
; This software contains source code for use with HDSC
; components. This software is licensed by HDSC to be adapted only
; for use in systems utilizing HDSC components. HDSC shall not be
; responsible for misuse or illegal use of this software for devices not
; supported herein. HDSC is providing this software "AS IS" and will
; not be responsible for issues arising from incorrect user implementation
; of the software.
;
; Disclaimer:
; HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
; REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
; ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
; WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
; WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
; WARRANTY OF NONINFRINGEMENT.
; HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
; NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
; LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
; LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
; INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
; INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
; SAVINGS OR PROFITS,
; EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
; YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
; INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
; FROM, THE SOFTWARE.
;
; This software may be replicated in part or whole for the licensed use,
; with the restriction that this Disclaimer and Copyright notice must be
; included with each copy of this software, whether used in part or whole,
; at all times.
;/
;/*****************************************************************************/
;/* Startup for IAR */
;/* Version V1.0 */
;/* Date 2018-04-15 */
;/* Target-mcu M0+ Device */
;/*****************************************************************************/
MODULE ?cstartup
;; Forward declaration of sections.
SECTION CSTACK:DATA:NOROOT(3)
EXTERN __iar_program_start
EXTERN SystemInit
PUBLIC __vector_table
SECTION .intvec:CODE:ROOT(8)
DATA
__vector_table DCD sfe(CSTACK)
DCD Reset_Handler
DCD NMI_Handler ; NMI
DCD HardFault_Handler ; Hard Fault
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall
DCD 0 ; Debug Monitor
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV
DCD SysTick_Handler ; SysTick
; Numbered IRQ handler vectors
; Note: renaming to device dependent ISR function names are done in
DCD IRQ000_Handler
DCD IRQ001_Handler
DCD IRQ002_Handler
DCD IRQ003_Handler
DCD IRQ004_Handler
DCD IRQ005_Handler
DCD IRQ006_Handler
DCD IRQ007_Handler
DCD IRQ008_Handler
DCD IRQ009_Handler
DCD IRQ010_Handler
DCD IRQ011_Handler
DCD IRQ012_Handler
DCD IRQ013_Handler
DCD IRQ014_Handler
DCD IRQ015_Handler
DCD IRQ016_Handler
DCD IRQ017_Handler
DCD IRQ018_Handler
DCD IRQ019_Handler
DCD IRQ020_Handler
DCD IRQ021_Handler
DCD IRQ022_Handler
DCD IRQ023_Handler
DCD IRQ024_Handler
DCD IRQ025_Handler
DCD IRQ026_Handler
DCD IRQ027_Handler
DCD IRQ028_Handler
DCD IRQ029_Handler
DCD IRQ030_Handler
DCD IRQ031_Handler
THUMB
PUBWEAK Reset_Handler
SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
;reset NVIC if in rom debug
LDR R0, =0x20000000
LDR R2, =0x0 ; vector offset
cmp PC, R0
bls ROMCODE
; ram code base address.
ADD R2, R0,R2
ROMCODE
; reset Vector table address.
LDR R0, =0xE000ED08
STR R2, [R0]
LDR R0, =SystemInit
BLX R0
LDR R0, =__iar_program_start
BX R0
PUBWEAK NMI_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK HardFault_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
HardFault_Handler
B HardFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK PendSV_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
PendSV_Handler
B PendSV_Handler
PUBWEAK SysTick_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
SysTick_Handler
B SysTick_Handler
PUBWEAK IRQ000_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ000_Handler
B IRQ000_Handler
PUBWEAK IRQ001_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ001_Handler
B IRQ001_Handler
PUBWEAK IRQ002_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ002_Handler
B IRQ002_Handler
PUBWEAK IRQ003_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ003_Handler
B IRQ003_Handler
PUBWEAK IRQ004_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ004_Handler
B IRQ004_Handler
PUBWEAK IRQ005_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ005_Handler
B IRQ005_Handler
PUBWEAK IRQ006_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ006_Handler
B IRQ006_Handler
PUBWEAK IRQ007_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ007_Handler
B IRQ007_Handler
PUBWEAK IRQ008_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ008_Handler
B IRQ008_Handler
PUBWEAK IRQ009_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ009_Handler
B IRQ009_Handler
PUBWEAK IRQ010_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ010_Handler
B IRQ010_Handler
PUBWEAK IRQ011_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ011_Handler
B IRQ011_Handler
PUBWEAK IRQ012_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ012_Handler
B IRQ012_Handler
PUBWEAK IRQ013_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ013_Handler
B IRQ013_Handler
PUBWEAK IRQ014_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ014_Handler
B IRQ014_Handler
PUBWEAK IRQ015_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ015_Handler
B IRQ015_Handler
PUBWEAK IRQ016_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ016_Handler
B IRQ016_Handler
PUBWEAK IRQ017_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ017_Handler
B IRQ017_Handler
PUBWEAK IRQ018_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ018_Handler
B IRQ018_Handler
PUBWEAK IRQ019_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ019_Handler
B IRQ019_Handler
PUBWEAK IRQ020_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ020_Handler
B IRQ020_Handler
PUBWEAK IRQ021_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ021_Handler
B IRQ021_Handler
PUBWEAK IRQ022_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ022_Handler
B IRQ022_Handler
PUBWEAK IRQ023_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ023_Handler
B IRQ023_Handler
PUBWEAK IRQ024_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ024_Handler
B IRQ024_Handler
PUBWEAK IRQ025_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ025_Handler
B IRQ025_Handler
PUBWEAK IRQ026_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ026_Handler
B IRQ026_Handler
PUBWEAK IRQ027_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ027_Handler
B IRQ027_Handler
PUBWEAK IRQ028_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ028_Handler
B IRQ028_Handler
PUBWEAK IRQ029_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ029_Handler
B IRQ029_Handler
PUBWEAK IRQ030_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ030_Handler
B IRQ030_Handler
PUBWEAK IRQ031_Handler
SECTION .text:CODE:NOROOT:REORDER(1)
IRQ031_Handler
B IRQ031_Handler
END
bsp/hc32l136/Libraries/CMSIS/Device/HDSC/HC32L136/Source/interrupts_hc32l136.c 0 → 100644
浏览文件 @ 554d5bd8
/******************************************************************************
* Copyright (C) 2018, Huada Semiconductor Co.,Ltd All rights reserved.
*
* This software is owned and published by:
* Huada Semiconductor Co.,Ltd ("HDSC").
*
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
*
* This software contains source code for use with HDSC
* components. This software is licensed by HDSC to be adapted only
* for use in systems utilizing HDSC components. HDSC shall not be
* responsible for misuse or illegal use of this software for devices not
* supported herein. HDSC is providing this software "AS IS" and will
* not be responsible for issues arising from incorrect user implementation
* of the software.
*
* Disclaimer:
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
* WARRANTY OF NONINFRINGEMENT.
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
* SAVINGS OR PROFITS,
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
* FROM, THE SOFTWARE.
*
* This software may be replicated in part or whole for the licensed use,
* with the restriction that this Disclaimer and Copyright notice must be
* included with each copy of this software, whether used in part or whole,
* at all times.
*/
/******************************************************************************/
/** \file interrupts_hc32l136.c
**
** Interrupt management
** @link Driver Group Some description @endlink
**
** - 2018-04-15 1.0 Lux First version.
**
**
******************************************************************************/
/*******************************************************************************
* Include files
******************************************************************************/
#include "ddl.h"
#include "interrupts_hc32l136.h"
void Gpio_IRQHandler(uint8_t u8Param);
__WEAKDEF void Dma_IRQHandler(uint8_t u8Param);
void Uart_IRQHandler(uint8_t u8Param);
__WEAKDEF void LpUart_IRQHandler(uint8_t u8Param);
__WEAKDEF void Spi_IRQHandler(uint8_t u8Param);
__WEAKDEF void I2c_IRQHandler(uint8_t u8Param);
__WEAKDEF void Tim_IRQHandler(uint8_t u8Param);
__WEAKDEF void Tim3_IRQHandler(uint8_t u8Param);
__WEAKDEF void Adt_IRQHandler(uint8_t u8Param);
__WEAKDEF void LpTim_IRQHandler(uint8_t u8Param);
__WEAKDEF void Pca_IRQHandler(uint8_t u8Param);
__WEAKDEF void Wdt_IRQHandler(uint8_t u8Param);
__WEAKDEF void Vc_IRQHandler(uint8_t u8Param);
__WEAKDEF void Rtc_IRQHandler(uint8_t u8Param);
__WEAKDEF void Adc_IRQHandler(uint8_t u8Param);
__WEAKDEF void Pcnt_IRQHandler(uint8_t u8Param);
__WEAKDEF void Lvd_IRQHandler(uint8_t u8Param);
__WEAKDEF void Lcd_IRQHandler(uint8_t u8Param);
__WEAKDEF void EfRam_IRQHandler(uint8_t u8Param);
__WEAKDEF void ClkTrim_IRQHandler(uint8_t u8Param);
/**
*******************************************************************************
** \brief NVIC 中断使能
**
** \param [in] enIrq 中断号枚举类型
** \param [in] enLevel 中断优先级枚举类型
** \param [in] bEn 中断开关
** \retval Ok 设置成功
** 其他值 设置失败
******************************************************************************/
void EnableNvic(IRQn_Type enIrq, en_irq_level_t enLevel, boolean_t bEn)
{
NVIC_ClearPendingIRQ(enIrq);
NVIC_SetPriority(enIrq, enLevel);
if (TRUE == bEn)
{
NVIC_EnableIRQ(enIrq);
}
else
{
NVIC_DisableIRQ(enIrq);
}
}
/**
*******************************************************************************
** \brief NVIC hardware fault 中断实现
** 用于单步调试功能
**
** \retval
******************************************************************************/
//void HardFault_Handler(void)
//{
// volatile int a = 0;
// while( 0 == a)
// {
// ;
// }
//}
/**
*******************************************************************************
** \brief GPIO PortA 中断处理函数
**
** \retval
******************************************************************************/
void PORTA_IRQHandler(void)
{
Gpio_IRQHandler(0);
}
/**
*******************************************************************************
** \brief GPIO PortB 中断处理函数
**
** \retval
******************************************************************************/
void PORTB_IRQHandler(void)
{
Gpio_IRQHandler(1);
}
/**
*******************************************************************************
** \brief GPIO PortC 中断处理函数
**
** \retval
******************************************************************************/
void PORTC_IRQHandler(void)
{
Gpio_IRQHandler(2);
}
/**
*******************************************************************************
** \brief GPIO PortD 中断处理函数
**
** \retval
******************************************************************************/
void PORTD_IRQHandler(void)
{
Gpio_IRQHandler(3);
}
/**
*******************************************************************************
** \brief DMAC 中断处理函数
**
** \retval
******************************************************************************/
void DMAC_IRQHandler(void)
{
Dma_IRQHandler(0);
}
/**
*******************************************************************************
** \brief UART0 串口0 中断处理函数
**
** \retval
******************************************************************************/
void UART0_IRQHandler(void)
{
Uart_IRQHandler(0);
}
/**
*******************************************************************************
** \brief UART1 串口1 中断处理函数
**
** \retval
******************************************************************************/
void UART1_IRQHandler(void)
{
Uart_IRQHandler(1);
}
/**
*******************************************************************************
** \brief LPUART0 低功耗串口0 中断处理函数
**
** \retval
******************************************************************************/
void LPUART0_IRQHandler(void)
{
LpUart_IRQHandler(0);
}
/**
*******************************************************************************
** \brief LPUART1 低功耗串口1 中断处理函数
**
** \retval
******************************************************************************/
void LPUART1_IRQHandler(void)
{
LpUart_IRQHandler(1);
}
/**
*******************************************************************************
** \brief SPI0 中断处理函数
**
** \retval
******************************************************************************/
void SPI0_IRQHandler(void)
{
Spi_IRQHandler(0);
}
/**
*******************************************************************************
** \brief SPI1 中断处理函数
**
** \retval
******************************************************************************/
void SPI1_IRQHandler(void)
{
Spi_IRQHandler(1);
}
/**
*******************************************************************************
** \brief I2C0 中断处理函数
**
** \retval
******************************************************************************/
void I2C0_IRQHandler(void)
{
I2c_IRQHandler(0);
}
/**
*******************************************************************************
** \brief I2C1 中断处理函数
**
** \retval
******************************************************************************/
void I2C1_IRQHandler(void)
{
I2c_IRQHandler(1);
}
/**
*******************************************************************************
** \brief TIM0 基础时钟0 中断处理函数
**
** \retval
******************************************************************************/
void TIM0_IRQHandler(void)
{
Tim_IRQHandler(0);
}
/**
*******************************************************************************
** \brief TIM1 基础时钟1 中断处理函数
**
** \retval
******************************************************************************/
void TIM1_IRQHandler(void)
{
Tim_IRQHandler(1);
}
/**
*******************************************************************************
** \brief TIM2 基础时钟2 中断处理函数
**
** \retval
******************************************************************************/
void TIM2_IRQHandler(void)
{
Tim_IRQHandler(2);
}
/**
*******************************************************************************
** \brief TIM3 基础时钟3 中断处理函数
**
** \retval
******************************************************************************/
void TIM3_IRQHandler(void)
{
Tim3_IRQHandler(0);
}
/**
*******************************************************************************
** \brief LPTIM 低功耗时钟 中断处理函数
**
** \retval
******************************************************************************/
void LPTIM_IRQHandler(void)
{
LpTim_IRQHandler(0);
}
/**
*******************************************************************************
** \brief TIM4 高级时钟4 中断处理函数
**
** \retval
******************************************************************************/
void TIM4_IRQHandler(void)
{
Adt_IRQHandler(4);
}
/**
*******************************************************************************
** \brief TIM5 高级时钟5 中断处理函数
**
** \retval
******************************************************************************/
void TIM5_IRQHandler(void)
{
Adt_IRQHandler(5);
}
/**
*******************************************************************************
** \brief TIM6 高级时钟6 中断处理函数
**
** \retval
******************************************************************************/
void TIM6_IRQHandler(void)
{
Adt_IRQHandler(6);
}
/**
*******************************************************************************
** \brief PCA 中断处理函数
**
** \retval
******************************************************************************/
void PCA_IRQHandler(void)
{
Pca_IRQHandler(0);
}
/**
*******************************************************************************
** \brief WDT 中断处理函数
**
** \retval
******************************************************************************/
void WDT_IRQHandler(void)
{
Wdt_IRQHandler(0);
}
/**
*******************************************************************************
** \brief RTC 中断处理函数
**
** \retval
******************************************************************************/
void RTC_IRQHandler(void)
{
Rtc_IRQHandler(0);
}
/**
*******************************************************************************
** \brief ADC 中断处理函数
**
** \retval
******************************************************************************/
void ADC_IRQHandler(void)
{
Adc_IRQHandler(0);
}
/**
*******************************************************************************
** \brief PCNT 中断处理函数
**
** \retval
******************************************************************************/
void PCNT_IRQHandler(void)
{
Pcnt_IRQHandler(0);
}
/**
*******************************************************************************
** \brief 电压比较0 中断处理函数
**
** \retval
******************************************************************************/
void VC0_IRQHandler(void)
{
Vc_IRQHandler(0);
}
/**
*******************************************************************************
** \brief 电压比较1 中断处理函数
**
** \retval
******************************************************************************/
void VC1_IRQHandler(void)
{
Vc_IRQHandler(1);
}
/**
*******************************************************************************
** \brief 低电压检测 中断处理函数
**
** \retval
******************************************************************************/
void LVD_IRQHandler(void)
{
Lvd_IRQHandler(0);
}
/**
*******************************************************************************
** \brief LCD 中断处理函数
**
** \retval
******************************************************************************/
void LCD_IRQHandler(void)
{
Lcd_IRQHandler(0);
}
/**
*******************************************************************************
** \brief RAM 中断处理函数
**
** \retval
******************************************************************************/
void EF_RAM_IRQHandler(void)
{
EfRam_IRQHandler(0);
}
/**
*******************************************************************************
** \brief 时钟校准 中断处理函数
**
** \retval
******************************************************************************/
void CLKTRIM_IRQHandler(void)
{
ClkTrim_IRQHandler(0);
}
/******************************************************************************/
/* EOF (not truncated) */
/******************************************************************************/
bsp/hc32l136/Libraries/CMSIS/Device/HDSC/HC32L136/Source/system_hc32l136.h 0 → 100644
浏览文件 @ 554d5bd8
/*******************************************************************************
* Copyright (C) 2018, Huada Semiconductor Co.,Ltd All rights reserved.
*
* This software is owned and published by:
* Huada Semiconductor Co.,Ltd ("HDSC").
*
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
*
* This software contains source code for use with HDSC
* components. This software is licensed by HDSC to be adapted only
* for use in systems utilizing HDSC components. HDSC shall not be
* responsible for misuse or illegal use of this software for devices not
* supported herein. HDSC is providing this software "AS IS" and will
* not be responsible for issues arising from incorrect user implementation
* of the software.
*
* Disclaimer:
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
* WARRANTY OF NONINFRINGEMENT.
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
* SAVINGS OR PROFITS,
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
* FROM, THE SOFTWARE.
*
* This software may be replicated in part or whole for the licensed use,
* with the restriction that this Disclaimer and Copyright notice must be
* included with each copy of this software, whether used in part or whole,
* at all times.
*/
/******************************************************************************/
/** \file system_hc32l136.h
**
** A detailed description is available at
** @link SampleGroup Some description @endlink
**
** - 2018-03-09 1.0 Lux First version.
**
******************************************************************************/
#ifndef __SYSTEM_HC32L136_H__
#define __SYSTEM_HC32L136_H__
/******************************************************************************/
/* Include files */
/******************************************************************************/
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/******************************************************************************/
/* Global pre-processor symbols/macros ('define') */
/******************************************************************************/
#define HWWD_DISABLE (1)
/**
******************************************************************************
** \brief Clock Setup macro definition
**
** - 0: CLOCK_SETTING_NONE - User provides own clock setting in application
** - 1: CLOCK_SETTING_CMSIS -
******************************************************************************/
#define CLOCK_SETTING_NONE 0u
#define CLOCK_SETTING_CMSIS 1u
/******************************************************************************/
/* */
/* START OF USER SETTINGS HERE */
/* =========================== */
/* */
/* All lines with '<<<' can be set by user. */
/* */
/******************************************************************************/
/******************************************************************************/
/* Global function prototypes ('extern', definition in C source) */
/******************************************************************************/
extern uint32_t SystemCoreClock; // System Clock Frequency (Core Clock)
extern void SystemInit (void); // Initialize the system
extern void SystemCoreClockUpdate (void); // Update SystemCoreClock variable
#ifdef __cplusplus
}
#endif
#endif /* __SYSTEM_HC32L136_H__ */
bsp/hc32l136/Libraries/CMSIS/Device/HDSC/HC32L136/Source/system_hc32l13x.c 0 → 100644
浏览文件 @ 554d5bd8
/*******************************************************************************
* Copyright (C) 2019, Huada Semiconductor Co.,Ltd All rights reserved.
*
* This software is owned and published by:
* Huada Semiconductor Co.,Ltd ("HDSC").
*
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
*
* This software contains source code for use with HDSC
* components. This software is licensed by HDSC to be adapted only
* for use in systems utilizing HDSC components. HDSC shall not be
* responsible for misuse or illegal use of this software for devices not
* supported herein. HDSC is providing this software "AS IS" and will
* not be responsible for issues arising from incorrect user implementation
* of the software.
*
* Disclaimer:
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
* WARRANTY OF NONINFRINGEMENT.
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
* SAVINGS OR PROFITS,
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
* FROM, THE SOFTWARE.
*
* This software may be replicated in part or whole for the licensed use,
* with the restriction that this Disclaimer and Copyright notice must be
* included with each copy of this software, whether used in part or whole,
* at all times.
*/
/******************************************************************************/
/** \file system_hc32l13x.c
**
** System clock initialization.
** @link SampleGroup Some description @endlink
**
** - 2019-03-01 1.0 Lux First version.
**
******************************************************************************/
/******************************************************************************/
/* Include files */
/******************************************************************************/
#include "base_types.h"
#include "hc32l136.h"
#include "system_hc32l13x.h"
#include "sysctrl.h"
/**
******************************************************************************
** System Clock Frequency (Core Clock) Variable according CMSIS
******************************************************************************/
uint32_t SystemCoreClock = 4000000;
//add clock source.
void SystemCoreClockUpdate (void) // Update SystemCoreClock variable
{
SystemCoreClock = Sysctrl_GetHClkFreq();
}
/**
******************************************************************************
** \brief Setup the microcontroller system. Initialize the System and update
** the SystemCoreClock variable.
**
** \param none
** \return none
******************************************************************************/
void SystemInit(void)
{
SystemCoreClockUpdate();
}
bsp/hc32l136/Libraries/CMSIS/Include/cmsis_armcc.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/cmsis_armclang.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/cmsis_compiler.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/cmsis_gcc.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/cmsis_iccarm.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/cmsis_version.h 0 → 100644
浏览文件 @ 554d5bd8
/**************************************************************************//**
* @file cmsis_version.h
* @brief CMSIS Core(M) Version definitions
* @version V5.0.3
* @date 24. June 2019
******************************************************************************/
/*
* Copyright (c) 2009-2019 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef __CMSIS_VERSION_H
#define __CMSIS_VERSION_H
/* CMSIS Version definitions */
#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */
#define __CM_CMSIS_VERSION_SUB ( 3U) /*!< [15:0] CMSIS Core(M) sub version */
#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \
__CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */
#endif
bsp/hc32l136/Libraries/CMSIS/Include/core_armv81mml.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_armv8mbl.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_armv8mml.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_cm0.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_cm0plus.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_cm1.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_cm23.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_cm3.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_cm33.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_cm35p.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_cm4.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_cm7.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_sc000.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/core_sc300.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/mpu_armv7.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/mpu_armv8.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/CMSIS/Include/tz_context.h 0 → 100644
浏览文件 @ 554d5bd8
/******************************************************************************
* @file tz_context.h
* @brief Context Management for Armv8-M TrustZone
* @version V1.0.1
* @date 10. January 2018
******************************************************************************/
/*
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef TZ_CONTEXT_H
#define TZ_CONTEXT_H
#include <stdint.h>
#ifndef TZ_MODULEID_T
#define TZ_MODULEID_T
/// \details Data type that identifies secure software modules called by a process.
typedef uint32_t TZ_ModuleId_t;
#endif
/// \details TZ Memory ID identifies an allocated memory slot.
typedef uint32_t TZ_MemoryId_t;
/// Initialize secure context memory system
/// \return execution status (1: success, 0: error)
uint32_t TZ_InitContextSystem_S (void);
/// Allocate context memory for calling secure software modules in TrustZone
/// \param[in] module identifies software modules called from non-secure mode
/// \return value != 0 id TrustZone memory slot identifier
/// \return value 0 no memory available or internal error
TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module);
/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id);
/// Load secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_LoadContext_S (TZ_MemoryId_t id);
/// Store secure context (called on RTOS thread context switch)
/// \param[in] id TrustZone memory slot identifier
/// \return execution status (1: success, 0: error)
uint32_t TZ_StoreContext_S (TZ_MemoryId_t id);
#endif // TZ_CONTEXT_H
bsp/hc32l136/Libraries/LICENSE 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/Libraries/SConscript 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/README.md 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/SConscript 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/SConstruct 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/applications/SConscript 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/applications/main.c 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/board/Kconfig 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/board/SConscript 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/board/board.c 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/board/board.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/board/linker_scripts/link.icf 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/board/linker_scripts/link.lds 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/board/linker_scripts/link.sct 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/drivers/SConscript 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/drivers/drv_gpio.c 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/drivers/drv_gpio.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/drivers/drv_usart.c 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/drivers/drv_usart.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/figures/board.png 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/project.ewp 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/project.eww 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/project.uvoptx 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/project.uvprojx 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/rtconfig.h 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/rtconfig.py 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/template.ewp 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/template.eww 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/template.uvoptx 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
bsp/hc32l136/template.uvprojx 0 → 100644
浏览文件 @ 554d5bd8
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或