- 03 1月, 2009 40 次提交
-
-
由 Thomas Pfaff 提交于
The N_TTY ldisc layer does not send SIGIO POLL_OUTs correctly when output is possible due to flawed handling of the TTY_DO_WRITE_WAKEUP bit. It will either send no SIGIOs at all or on every tty wakeup. The fix is to set the bit when the tty driver write would block and test and clear it on write wakeup. [Merged with existing N_TTY patches and a small buglet fixed -- Alan] Signed-off-by: NThomas Pfaff <tpfaff@pcs.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
The underlying problem is that the device methods don't all correctly handle disconnected status and some keep reporting bytes pending which causes tcdrain to stall. When the cable is unplugged they are definitely gone, and as this is true for all USB cables we can fix it in the core usb serial code. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Niels de Vos 提交于
The PCI-card identified as "Oxford Semiconductor Ltd EXSYS EX-41092 Dual 16950 Serial adapter" is only usable with other devices (i.e. not the same card) after doing a "setserial /dev/ttyS<n> baud_base 115200". This baud_base should be default for this card. Signed-off-by: NNiels de Vos <niels.devos@wincor-nixdorf.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Again this is a lot of common code we can unify Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
If we have no speed set at some point then we should not raise DTR/RTS at that point when opening as the tty is not ready Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Mark it broken Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Start sucking more commonality out of the drivers into a single piece of core code. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Normalise them so we can use the common helpers later on Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Switch generic_serial to do port count locking via the tty_port structure ready for moving to a common port wait routine. Keep the old driver lock for internal calling so we don't risk messing up the drivers below until we are ready. Still needs kref conversions Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
This helps set the basis for moving block_til_ready into common code. We also introduce a tty_port_hangup helper as this will also be generally needed. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
This moves another per device special out of what should be shared open wait paths into private methods Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
This was an alloc/clear wrapper but makes even less sense now it uses kzalloc. Kill it off. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
This is the first step to generalising the various pieces of waiting logic duplicated in all sorts of serial drivers. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kevin Hao 提交于
Add device funtion for usb serial console, so we can open /dev/console when we use a usb serial device as console. (Typecast removed as noted by Sergei Shtylyov) Signed-off-by: NKevin Hao <kexin.hao@windriver.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
this happening again by making use of 'const'. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
scribble on its own reference structures. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
fs/devpts/inode.c:324: warning: 'compare_init_pts_sb' defined but not used Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
USB serial has always had races where the tty port usage count can hit zero during a receive event. The internal locking is a mutex so we can't use that in the IRQ handlers. With krefs we can tackle this differently but we still need to be careful. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Peterson 提交于
This patch causes "bell" (^G) characters (invoked when the input buffer is full) to be immediately output rather than filling the echo buffer. This is especially a problem when the tty is stopped and buffers fill, since the bells do not serve their purpose of immediate notification that the buffer cannot take further input, and they will flush all at once when the tty is restarted. Signed-off-by: NJoe Peterson <joe@skyrush.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Peterson 提交于
Fix the handling of input characters when the tty buffer is full or nearly full. This includes tests that are done in n_tty_receive_char() and handling of PARMRK. Problems with the buffer-full tests done in receive_char() caused characters to be lost at times when the buffer(s) filled. Also, these full conditions would often only be detected with echo on, and PARMRK was not accounted for properly in all cases. One symptom of these problems, in addition to lost characters, was early termination from unix commands like tr and cat when ^Q was used to break from a stopped tty with full buffers (note that breaking out was often previously not possible, due to the pty getting in "gridlock", which will be addressed in another patch). Note space is always reserved at the end of the buffer for a newline (or EOF/EOL) in canonical mode. Signed-off-by: NJoe Peterson <joe@skyrush.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Peterson 提交于
Fix process_output_block to detect continuation characters correctly and to handle control characters even when O_OLCUC is enabled. Make similar change to do_output_char(). Signed-off-by: NJoe Peterson <joe@skyrush.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
We have special case logic for resizing pty/tty pairs. We also have a per driver resize method so for the pty case we should use it. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jason Wessel 提交于
Fixed sparse warning: drivers/char/tty_io.c:1216:19: warning: symbol 'tty_driver_lookup_tty' was not declared. Should it be static? Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Andrew Morton wrote: in drivers/usb/serial/sierra.c: } else { if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); tty_buffer_request_room(tty, urb->actual_length); it's missing a tab. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Just nail the oddments now while this code is being touched Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sukadev Bhattiprolu 提交于
Changelog [v2]: - Add note indicating strict isolation is not possible unless all mounts of devpts use the 'newinstance' mount option. Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sukadev Bhattiprolu 提交于
To support containers, allow multiple instances of devpts filesystem, such that indices of ptys allocated in one instance are independent of ptys allocated in other instances of devpts. But to preserve backward compatibility, enable this support for multiple instances only if: - CONFIG_DEVPTS_MULTIPLE_INSTANCES is set to Y, and - '-o newinstance' mount option is specified while mounting devpts To use multi-instance mount, a container startup script could: $ ns_exec -cm /bin/bash $ umount /dev/pts $ mount -t devpts -o newinstance lxcpts /dev/pts $ mount -o bind /dev/pts/ptmx /dev/ptmx $ /usr/sbin/sshd -p 1234 where 'ns_exec -cm /bin/bash' is calls clone() with CLONE_NEWNS flag and execs /bin/bash in the child process. A pty created by the sshd is not visible in the original mount of /dev/pts. USER-SPACE-IMPACT: - See Documentation/fs/devpts.txt (included in next patch) for user- space impact in multi-instance and mixed-mode operation. TODO: - Update mount(8), pts(4) man pages. Highlight impact of not redirecting /dev/ptmx to /dev/pts/ptmx after a multi-instance mount. Changelog[v6]: - [Dave Hansen] Use new get_init_pts_sb() interface - [Serge Hallyn] Don't bother displaying 'newinstance' in show_options - [Serge Hallyn] Use macros (PARSE_REMOUNT/PARSE_MOUNT) instead of 0/1. - [Serge Hallyn] Check error return from get_sb_single() (now get_init_pts_sb()) - devpts_pty_kill(): don't dput error dentries Changelog[v5]: - Move get_sb_ref() definition to earlier patch - Move usage info to Documentation/filesystems/devpts.txt (next patch) - Make ptmx node even in init_pts_ns, now that default mode is 0000 (defined in earlier patch, enabled here). - Cache ptmx dentry and use to update mode during remount (defined in earlier patch, enabled here). - Bugfix: explicitly ignore newinstance on remount (if newinstance was specified on remount of initial mount, it would be ignored but /proc/mounts would imply that the option was set) Changelog[v4]: - Update patch description to address H. Peter Anvin's comments - Consolidate multi-instance mode code under new config token, CONFIG_DEVPTS_MULTIPLE_INSTANCE. - Move usage-details from patch description to Documentation/fs/devpts.txt Changelog[v3]: - Rename new mount option to 'newinstance' - Create ptmx nodes only in 'newinstance' mounts - Bugfix: parse_mount_options() modifies @data but since we need to parse the @data twice (once in devpts_get_sb() and once during do_remount_sb()), parse a local copy of @data in devpts_get_sb(). (restructured code in devpts_get_sb() to fix this) Changelog[v2]: - Support both single-mount and multiple-mount semantics and provide '-onewmnt' option to select the semantics. Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sukadev Bhattiprolu 提交于
See comments in the function header for details. The new interface will be used in a follow-on patch. Changelog [v2]: [Dave Hansen] Replace get_sb_ref() in fs/super.c with get_init_pts_sb() and make the new interface private to devpts Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sukadev Bhattiprolu 提交于
/dev/ptmx is closely tied to the devpts filesystem. An open of /dev/ptmx, allocates the next pty index and the associated device shows up in the devpts fs as /dev/pts/n. Wih multiple instancs of devpts filesystem, during an open of /dev/ptmx we would be unable to determine which instance of the devpts is being accessed. So we move the 'ptmx' node into /dev/pts and use the inode of the 'ptmx' node to identify the superblock and hence the devpts instance. This patch adds ability for the kernel to internally create the [ptmx, c, 5:2] device when mounting devpts filesystem. Since the ptmx node in devpts is new and may surprise some userspace scripts, the default permissions for the new node is 0000. These permissions can be changed either using chmod or by remounting with the new '-o ptmxmode=0666' mount option. Changelog[v5]: - [Serge Hallyn bugfix]: Letting new_inode() assign inode number to ptmx can collide with hand-assigning inode numbers to ptys. So, hand-assign specific inode number to ptmx node also. - [Serge Hallyn]: Maybe safer to grab root dentry mutex while creating ptmx node - [Bugfix with Serge Hallyn] Replace lookup_one_len() in mknod_ptmx() wih d_alloc_name() (lookup during ->get_sb() locks up system). To simplify patchset, fold the ptmx_dentry patch into this. Changelog[v4]: - Change default permissions of pts/ptmx node to 0000. - Move code for ptmxmode under #ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES. Changelog[v3]: - Rename ptmx_mode to ptmxmode (for consistency with 'newinstance') Changelog[v2]: - [H. Peter Anvin] Remove mknod() system call support and create the ptmx node internally. Changelog[v1]: - Earlier version of this patch enabled creating /dev/pts/tty as well. As pointed out by Al Viro and H. Peter Anvin, that is not really necessary. Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sukadev Bhattiprolu 提交于
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sukadev Bhattiprolu 提交于
Move code to parse mount options into a separate function so it can (later) be shared between mount and remount operations. Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sukadev Bhattiprolu 提交于
With support for multiple mounts of devpts, the 'config' structure really represents per-mount options rather than config parameters. Rename 'config' structure to 'pts_mount_opts' and store it in the super-block. Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sukadev Bhattiprolu 提交于
To enable multiple mounts of devpts, 'allocated_ptys' must be a per-mount variable rather than a global variable. Move 'allocated_ptys' into the super_block's s_fs_info. Changelog[v2]: Define and use DEVPTS_SB() wrapper. Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sukadev Bhattiprolu 提交于
Remove the 'devpts_root' global variable and find the root dentry using the super_block. The super-block can be found from the device inode, using the new wrapper, pts_sb_from_inode(). Changelog: This patch is based on an earlier patchset from Serge Hallyn and Matt Helsley. Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-