Sparse notices that declaration and implementation do not match:
arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17: warning: incorrect type in return expression (different address spaces)
arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17:    expected struct kvm_vcpu [noderef] <asn:3> **
arch/s390/kvm/../../../virt/kvm/kvm_main.c:4435:17:    got struct kvm_vcpu *[noderef] <asn:3> *
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Even if APICv is disabled at startup, the backing page and ir_list need
to be initialized in case they are needed later.  The only case in
which this can be skipped is for userspace irqchip, and that must be
done because avic_init_backing_page dereferences vcpu->arch.apic
(which is NULL for userspace irqchip).

Tested-by: rmuncrief@humanavance.com
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206579Reviewed-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We also need to rstify the new ioctls that we added in parallel to the
rstification of the kvm docs.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Consult the 'unconditional IO exiting' and 'use IO bitmaps' VM-execution
controls when checking instruction interception. If the 'use IO bitmaps'
VM-execution control is 1, check the instruction access against the IO
bitmaps to determine if the instruction causes a VM-exit.
Signed-off-by: NOliver Upton <oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Checks against the IO bitmap are useful for both instruction emulation
and VM-exit reflection. Refactor the IO bitmap checks into a helper
function.
Signed-off-by: NOliver Upton <oupton@google.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

vmx_check_intercept is not yet fully implemented. To avoid emulating
instructions disallowed by the L1 hypervisor, refuse to emulate
instructions by default.

Cc: stable@vger.kernel.org
[Made commit, added commit msg - Oliver]
Signed-off-by: NOliver Upton <oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since commit 5f3d45e7 ("kvm/x86: add support for
MONITOR_TRAP_FLAG"), KVM has allowed an L1 guest to use the monitor trap
flag processor-based execution control for its L2 guest. KVM simply
forwards any MTF VM-exits to the L1 guest, which works for normal
instruction execution.

However, when KVM needs to emulate an instruction on the behalf of an L2
guest, the monitor trap flag is not emulated. Add the necessary logic to
kvm_skip_emulated_instruction() to synthesize an MTF VM-exit to L1 upon
instruction emulation for L2.

Fixes: 5f3d45e7 ("kvm/x86: add support for MONITOR_TRAP_FLAG")
Signed-off-by: NOliver Upton <oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

rename svm_hardware_unsetup as svm_hardware_teardown, move
it before svm_hardware_setup, and call it to free all memory
if fail to setup in svm_hardware_setup, otherwise memory will
be leaked

remove __exit attribute for it since it is called in __init
function
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When kmalloc memory for sd->sev_vmcbs failed, we forget to free the page
held by sd->save_area. Also get rid of the var r as '-ENOMEM' is actually
the only possible outcome here.
Reviewed-by: NLiran Alon <liran.alon@oracle.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When pv_eoi_get_user() fails, 'val' may remain uninitialized and the return
value of pv_eoi_get_pending() becomes random. Fix the issue by initializing
the variable.
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled

When apicv is disabled on a vCPU (e.g. by enabling KVM_CAP_HYPERV_SYNIC*),
nothing happens to VMX MSRs on the already existing vCPUs, however, all new
ones are created with PIN_BASED_POSTED_INTR filtered out. This is very
confusing and results in the following picture inside the guest:

$ rdmsr -ax 0x48d
ff00000016
7f00000016
7f00000016
7f00000016

This is observed with QEMU and 4-vCPU guest: QEMU creates vCPU0, does
KVM_CAP_HYPERV_SYNIC2 and then creates the remaining three.

L1 hypervisor may only check CPU0's controls to find out what features
are available and it will be very confused later. Switch to setting
PIN_BASED_POSTED_INTR control based on global 'enable_apicv' setting.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Even when APICv is disabled for L1 it can (and, actually, is) still
available for L2, this means we need to always call
vmx_deliver_nested_posted_interrupt() when attempting an interrupt
delivery.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Launching VM w/ AVIC disabled together with pass-through device
results in NULL pointer dereference bug with the following call trace.

    RIP: 0010:svm_refresh_apicv_exec_ctrl+0x17e/0x1a0 [kvm_amd]

    Call Trace:
     kvm_vcpu_update_apicv+0x44/0x60 [kvm]
     kvm_arch_vcpu_ioctl_run+0x3f4/0x1c80 [kvm]
     kvm_vcpu_ioctl+0x3d8/0x650 [kvm]
     do_vfs_ioctl+0xaa/0x660
     ? tomoyo_file_ioctl+0x19/0x20
     ksys_ioctl+0x67/0x90
     __x64_sys_ioctl+0x1a/0x20
     do_syscall_64+0x57/0x190
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

Investigation shows that this is due to the uninitialized usage of
struct vapu_svm.ir_list in the svm_set_pi_irte_mode(), which is
called from svm_refresh_apicv_exec_ctrl().

The ir_list is initialized only if AVIC is enabled. So, fixes by
adding a check if AVIC is enabled in the svm_refresh_apicv_exec_ctrl().

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206579
Fixes: 8937d762 ("kvm: x86: svm: Add support to (de)activate posted interrupts.")
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 15934878 ("x86/vmx: Introduce VMX_FEATURES_*") missed
bit 26 (enable user wait and pause) of Secondary Processor-based
VM-Execution Controls.

Add VMX_FEATURE_USR_WAIT_PAUSE flag so that it shows up in /proc/cpuinfo,
and use it to define SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE to make them
uniform.
Signed-off-by: NXiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For the duration of mapping eVMCS, it derefences ->memslots without holding
->srcu or ->slots_lock when accessing hv assist page. This patch fixes it by
moving nested_sync_vmcs12_to_shadow to prepare_guest_switch, where the SRCU
is already taken.

It can be reproduced by running kvm's evmcs_test selftest.

  =============================
  warning: suspicious rcu usage
  5.6.0-rc1+ #53 tainted: g        w ioe
  -----------------------------
  ./include/linux/kvm_host.h:623 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

   rcu_scheduler_active = 2, debug_locks = 1
  1 lock held by evmcs_test/8507:
   #0: ffff9ddd156d00d0 (&vcpu->mutex){+.+.}, at:
kvm_vcpu_ioctl+0x85/0x680 [kvm]

  stack backtrace:
  cpu: 6 pid: 8507 comm: evmcs_test tainted: g        w ioe     5.6.0-rc1+ #53
  hardware name: dell inc. optiplex 7040/0jctf8, bios 1.4.9 09/12/2016
  call trace:
   dump_stack+0x68/0x9b
   kvm_read_guest_cached+0x11d/0x150 [kvm]
   kvm_hv_get_assist_page+0x33/0x40 [kvm]
   nested_enlightened_vmentry+0x2c/0x60 [kvm_intel]
   nested_vmx_handle_enlightened_vmptrld.part.52+0x32/0x1c0 [kvm_intel]
   nested_sync_vmcs12_to_shadow+0x439/0x680 [kvm_intel]
   vmx_vcpu_run+0x67a/0xe60 [kvm_intel]
   vcpu_enter_guest+0x35e/0x1bc0 [kvm]
   kvm_arch_vcpu_ioctl_run+0x40b/0x670 [kvm]
   kvm_vcpu_ioctl+0x370/0x680 [kvm]
   ksys_ioctl+0x235/0x850
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x77/0x780
   entry_syscall_64_after_hwframe+0x49/0xbe
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 13db7734 ("KVM: x86: don't notify userspace IOAPIC on edge
EOI") said, edge-triggered interrupts don't set a bit in TMR, which means
that IOAPIC isn't notified on EOI. And var level indicates level-triggered
interrupt.
But commit 3159d36a ("KVM: x86: use generic function for MSI parsing")
replace var level with irq.level by mistake. Fix it by changing irq.level
to irq.trig_mode.

Cc: stable@vger.kernel.org
Fixes: 3159d36a ("KVM: x86: use generic function for MSI parsing")
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

arch/x86/kvm/emulate.c: In function 'x86_emulate_insn':
arch/x86/kvm/emulate.c:5686:22: error: cast between incompatible
function types from 'int (*)(struct x86_emulate_ctxt *)' to 'void
(*)(struct fastop *)' [-Werror=cast-function-type]
    rc = fastop(ctxt, (fastop_t)ctxt->execute);

Fix it by using an unnamed union of a (*execute) function pointer and a
(*fastop) function pointer.

Fixes: 3009afc6 ("KVM: x86: Use a typedef for fastop functions")
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NQian Cai <cai@lca.pw>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The "u" field in the event has three states, -1/0/1.  Using u8 however means that
comparison with -1 will always fail, so change to signed char.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fix wrong variable names and grammar error in comment.
Signed-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reported with "make W=1" due to -Wmissing-prototypes.
Reported-by: NQian Cai <cai@lca.pw>
Reviewed-by: NMiaohe Lin <linmiaohe@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Avoid more embarrassing mistakes.  At least those that the compiler
can catch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Due to some merge conflict, this file ended being alone under
Documentation/virtual.

The file itself is almost at ReST format. Just minor
adjustments are needed:

- Adjust title markup;
- Adjust a list identation;
- add a literal block markup;
- Add some blank lines.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This file is already in ReST compatible format.
So, rename it and add to the kvm's index.rst.

While here, use the standard conversion for document titles.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Use document title and chapter markups;
- Add markups for literal blocks;
- Add markups for tables;
- use :field: for field descriptions;
- Add blank lines and adjust indentation.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This file is almost in ReST format. Just one change was
needed:

    - Add markups for a literal block and change its indentation.

While here, use the standard markup for the document title.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Use document title and chapter markups;
- Add markups for tables;
- Use list markups;
- Add markups for literal blocks;
- Add blank lines.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This file is almost in ReST format. Just a small set of
changes were needed:

    - Add markups for lists;
    - Add markups for a literal block;
    - Adjust whitespaces.

While here, use the standard markup for the document title.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Use document title and chapter markups;
- Add markups for tables;
- Add markups for literal blocks;
- Add blank lines and adjust indentation.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Use document title and chapter markups;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Use document title and chapter markups;
- Convert tables;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Add a title for the document;
- Adjust whitespaces for it to be properly formatted after
  parsed.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Add proper markups for titles;
- Adjust whitespaces and blank lines to match ReST
  needs;
- Mark literal blocks as such.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

convert api.txt document to ReST format while trying to keep
its format as close as possible with the authors intent, and
avoid adding uneeded markups.

- Use document title and chapter markups;
- Convert tables;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- mark code blocks as such.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- use :field: markups.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Use title markups;
- adjust indentation and add blank lines as needed;
- use :field: markups;
- Use cross-references;
- mark code blocks as such.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Use standard title markup;
- adjust lists;
- mark code blocks as such.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- use :field: markups;
- mark code blocks as such.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

- Use standard markup for document title;
- Adjust indentation and add blank lines as needed;
- use the notes markup;
- mark code blocks as such.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This document is almost in ReST format. The only thing
needed is to mark a list as such and to add an extra
whitespace.

Yet, let's also use the standard document title markup,
as it makes easier if anyone wants later to add sessions
to it.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>