- 06 8月, 2018 40 次提交
-
-
由 Alexander Aring 提交于
This patch is necessary if case of AF_PACKET or other socket interface which I am aware of it and didn't allocated the necessary room. Reported-by: NDavid Palma <david.palma@ntnu.no> Reported-by: NRabi Narayan Sahoo <rabinarayans0828@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NAlexander Aring <aring@mojatatu.com> Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org>
-
由 Alexander Aring 提交于
This patch fixes patch add handling to take care tail and headroom for single 6lowpan frames. We need to be sure we have a skb with the right head and tailroom for single frames. This patch do it by using skb_copy_expand() if head and tailroom is not enough allocated by upper layer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195059Reported-by: NDavid Palma <david.palma@ntnu.no> Reported-by: NRabi Narayan Sahoo <rabinarayans0828@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NAlexander Aring <aring@mojatatu.com> Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org>
-
由 Stefan Schmidt 提交于
-
由 Vlad Buslov 提交于
Match patterns for some skbedit tests contain duplicate whitespace that is not present in actual tc output. This causes tests to fail because they can't match required action, even when it was successfully created. Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Match patterns for some connmark tests contain duplicate whitespace that is not present in actual tc output. This causes tests to fail because they can't match required action, even when it was successfully created. Fixes: 1dad0f9f ("tc-testing: add connmark action tests") Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Test 6fb4 creates one mirred and one pipe action, but only flushes mirred on teardown. Leaking pipe action causes failures in other tests. Add additional teardown command to also flush gact actions. Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Fix expected ip address to actually match configured ip address. Fix test to expect single matched filter. Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-next-for-davem-2018-08-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 This time a bigger pull request as we have two new Mediatek drivers MT76x2u (CONFIG_MT76x2U) and MT76x0U (CONFIG_MT76x0U). Also iwlwifi got support for the new IEEE 802.11ax standard, the successor for 802.11ac. And naturally smaller new features and bugfixes all over. Major changes: wcn36xx * fix WEP in client mode wil6210 * add support for Talyn-MB (Talyn ver 2.0) device * add support for enhanced DMA firmware feature iwlwifi * implement 802.11ax D2.0 * support for the new 22560 device family * new PCI IDs for 22000 and 22560 qtnfmac * implement cfg80211 power management callback * enable multiple SSIDs scan support * qtnfmac: implement basic WoWLAN support mt7601u * fall back to software encryption for hw unsupported ciphers * enable 802.11 Management Frame Protection (MFP) mt76 * support setting RTS threshold * add USB support * add support for MT76x2u devices * add support for MT76x0U devices mwifiex * allow user space to set all other IEs except WMM IE rsi * add firmware support for AP+BT dual mode ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-08-05 Here's the main bluetooth-next pull request for the 4.19 kernel. - Added support for Bluetooth Advertising Extensions - Added vendor driver support to hci_h5 HCI driver - Added serdev support to hci_h5 driver - Added support for Qualcomm wcn3990 controller - Added support for RTL8723BS and RTL8723DS controllers - btusb: Added new ID for Realtek 8723DE - Several other smaller fixes & cleanups Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Ido Schimmel says: ==================== mlxsw: Enable MC-aware mode for mlxsw ports Petr says: Due to an issue in Spectrum chips, when unicast traffic shares the same queue as BUM traffic, and there is a congestion, the BUM traffic is admitted to the queue anyway, thus pushing out all UC traffic. In order to give unicast traffic precedence over BUM traffic, configure multicast-aware mode on all ports. Under multicast-aware regime, when assigning traffic class to a packet, the switch doesn't merely take the value prescribed by the QTCT register. For BUM traffic, it instead assigns that value plus 8. That limits the number of available TCs, but since mlxsw currently only uses the lower eight anyway, it is no real loss. The two TCs (UC and MC one) are then mapped to the same subgroup and strictly prioritized so that UC traffic is preferred in case of congestion. In patch #1, introduce a new register, QTCTM, which enables the multicast-aware mode. In patch #2, fix a typo in related code. In patch #3, set up TCs and QTCTM to enable multicast-aware mode. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
In order to give unicast traffic precedence over BUM traffic, configure multicast-aware mode on all ports. Under multicast-aware regime, when assigning traffic class to a packet, the switch doesn't merely take the value prescribed by the QTCT register. For BUM traffic, it instead assigns that value plus 8. ETS elements for TCs 8..15 thus need to be configured as well. Extend mlxsw_sp_port_ets_init() so that it maps each of them to the same subgroup as their corresponding TC from the range 0..7, such that TCs X and X+8 map to the same subgroup. The existing code configures TCs with strict priority. So far this was immaterial, because each TC had its own subgroup. Now that two TCs share a subgroup it becomes important. TCs are prioritized in order of 7, 6, ..., 0, 15, 14, ..., 8: the higher TCs used for BUM traffic end up being deprioritized. Since that's what's needed, keep that configuration as it is, and configure the new TCs likewise. Finally in mlxsw_sp_port_create(), invoke configuration of QTCTM to enable MC-aware mode on each port. Signed-off-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Signed-off-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
This register configures if the Switch Priority to Traffic Class mapping is based on Multicast packet indication. If so, then multicast packets will get a Traffic Class that is plus (cap_max_tclass_data/2) the value configured by QTCT. Signed-off-by: NPetr Machata <petrm@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1402059 ("Missing break in switch") Addresses-Coverity-ID: 1402060 ("Missing break in switch") Addresses-Coverity-ID: 1402061 ("Missing break in switch") Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We forgot to set the error code on this path, so we return NULL instead of an error pointer. In the current code kzalloc() won't fail for small allocations so this doesn't really affect runtime. Fixes: b95ec7eb ("net: sched: cls_flower: implement chain templates") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
dev_set_mtu_ext is able to fail with a valid mtu value, at that condition, extack._msg is not set and random since it is in stack, then kernel will crash when print it. Fixes: 7a4c53be ("net: report invalid mtu value via netlink extack") Signed-off-by: NZhang Yu <zhangyu31@baidu.com> Signed-off-by: NLi RongQing <lirongqing@baidu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
don't bother with pathological cases, they only waste cycles. IPv6 requires a minimum MTU of 1280 so we should never see fragments smaller than this (except last frag). v3: don't use awkward "-offset + len" v2: drop IPv4 part, which added same check w. IPV4_MIN_MTU (68). There were concerns that there could be even smaller frags generated by intermediate nodes, e.g. on radio networks. Cc: Peter Oskolkov <posk@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Peter Oskolkov says: ==================== ip: Use rb trees for IP frag queue. This patchset * changes IPv4 defrag behavior to match that of IPv6: overlapping fragments now cause the whole IP datagram to be discarded (suggested by David Miller): there are no legitimate use cases for overlapping fragments; * changes IPv4 defrag queue from a list to a rb tree (suggested by Eric Dumazet): this change removes a potential attach vector. Upcoming patches will contain similar changes for IPv6 frag queue, as well as a comprehensive IP defrag self-test (temporarily delayed). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Oskolkov 提交于
Similar to TCP OOO RX queue, it makes sense to use rb trees to store IP fragments, so that OOO fragments are inserted faster. Tested: - a follow-up patch contains a rather comprehensive ip defrag self-test (functional) - ran neper `udp_stream -c -H <host> -F 100 -l 300 -T 20`: netstat --statistics Ip: 282078937 total packets received 0 forwarded 0 incoming packets discarded 946760 incoming packets delivered 18743456 requests sent out 101 fragments dropped after timeout 282077129 reassemblies required 944952 packets reassembled ok 262734239 packet reassembles failed (The numbers/stats above are somewhat better re: reassemblies vs a kernel without this patchset. More comprehensive performance testing TBD). Reported-by: NJann Horn <jannh@google.com> Reported-by: NJuha-Matti Tilli <juha-matti.tilli@iki.fi> Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Oskolkov 提交于
Tested: see the next patch is the series. Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Oskolkov 提交于
This behavior is required in IPv6, and there is little need to tolerate overlapping fragments in IPv4. This change simplifies the code and eliminates potential DDoS attack vectors. Tested: ran ip_defrag selftest (not yet available uptream). Suggested-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPeter Oskolkov <posk@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vakul Garg 提交于
Function zerocopy_from_iter() unmarks the 'end' in input sgtable while adding new entries in it. The last entry in sgtable remained unmarked. This results in KASAN error report on using apis like sg_nents(). Before returning, the function needs to mark the 'end' in the last entry it adds. Signed-off-by: NVakul Garg <vakul.garg@nxp.com> Acked-by: NDave Watson <davejwatson@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Georg Kohmann 提交于
When a ICMPV6_PKT_TOOBIG is received from a link local address the pmtu will be updated on a route with an arbitrary interface index. Subsequent packets sent back to the same link local address may therefore end up not considering the updated pmtu. Current behavior breaks TAHI v6LC4.1.4 Reduce PMTU On-link. Referring to RFC 1981: Section 3: "Note that Path MTU Discovery must be performed even in cases where a node "thinks" a destination is attached to the same link as itself. In a situation such as when a neighboring router acts as proxy [ND] for some destination, the destination can to appear to be directly connected but is in fact more than one hop away." Using the interface index from the incoming ICMPV6_PKT_TOOBIG when updating the pmtu. Signed-off-by: NGeorg Kohmann <geokohma@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yangbo Lu 提交于
This patch is to support automatic configuration for ptp timer. If required ptp dts properties are not provided, driver could try to calculate a set of default configurations to initialize the ptp timer. This makes the driver work for many boards which don't have the required ptp dts properties in current kernel. Also the users could set dts properties by themselves according to their requirement. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yangbo Lu 提交于
This patch is to add clocks property for fman ptp timer node. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yangbo Lu 提交于
This patch is to add clocks property for fman ptp timer node. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michael Chan says: ==================== bnxt_en: Updates for net-next. This series includes the usual firmware spec update. The driver has added external phy loopback test and phy setup retry logic that is needed during hotplug. In the SRIOV space, the driver has added a new VF resource allocation mode that requires the VF driver to reserve resources during IFUP. IF state changes are now propagated to firmware so that firmware can release some resources during IFDOWN. ethtool method to get firmware core dump and hwmon temperature reading have been added. DSCP to user priority support has been added to the driver's DCBNL interface, and the CoS queue logic has been refined to make sure that the special RDMA Congestion Notification hardware CoS queue will not be used for networking traffic. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The CNP CoS queue is reserved for internal RDMA Congestion Notification Packets (CNP) and should not be used for a TC. Modify the CoS queue discovery code to skip over the CNP CoS queue and to reduce bp->max_tc accordingly. However, if RDMA is disabled in NVRAM, the the CNP CoS queue can be used for a TC. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Expand the .ieee_setapp() and ieee_delapp() DCBNL methods to support DSCP. This allows DSCP values to user priority mappings instead of using VLAN priorities. Each DSCP mapping is added or deleted one entry at a time using the firmware API. The firmware call can only be made from a PF. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
Export temperature sensor reading via hwmon sysfs. Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Use latest firmware API to notify firmware about IF state changes. Firmware has the option to clean up resources during IF down and to require the driver to reserve resources again during IF up. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The flags field is almost getting full. Move firmware capability flags to a new fw_cap field to better organize these firmware flags. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The BNXT_FLAG_NEW_RM flag is checked a lot in the code to determine if the new resource manager is in effect. Define a macro to perform this check. Signed-off-by: NMichael Chan <michael.chan@broadocm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasundhara Volam 提交于
Add support to collect live firmware coredump via ethtool. Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Set the default hash mode flag in HWRM_VNIC_RSS_CFG to signal to the firmware that the driver is compliant with the latest spec. With that, the firmware can return expanded RSS profile IDs that the driver checks to setup the proper gso_type for GRO-HW packets. But instead of checking for the new profile IDs, we check the IP_TYPE flag in TPA_START which is more straight forward than checking a list of profile IDs. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The new mode is "minimal-static" to be used when resources are more limited to support a large number of VFs, for example The PF driver will provision guaranteed minimum resources of 0. Each VF has no guranteed resources until it tries to reserve resources during device open. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
During hotplug, the driver's open function can be called almost immediately after power on reset. The PHY may not be ready and the firmware may return failure when the driver tries to update PHY settings. Add retry logic fired from the driver's timer to retry the operation for 5 seconds. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add code to detect firmware support for external loopback and the extra test entry for external loopback. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The driver gathers statistics using 2 mechanisms. Some stats are DMA'ed directly from hardware and others are polled from the driver's timer. Currently, we only adjust the DMA frequency based on the ethtool stats-block-usecs setting. This patch adjusts the driver's timer frequency as well to make everything consistent. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
New interface has firmware core dump support, new extended port statistics, and IF state change notifications to the firmware. Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-