- 26 3月, 2013 1 次提交
-
-
由 Stuart Yoder 提交于
For 32-bit, CONFIG_EPAPR_PARAVIRT pulls in both epapr_paravirt.c and epapr_hcalls.c which contains the 32-bit paravirt idle loop. For 64-bit, the paravirt idle loop is in idle_book3e.S and that source file is included only if CONFIG_PPC_BOOK3E_64 defined. This patch makes that dependency for 64-bit explicit. Fixes these build errors: arch/powerpc/kernel/built-in.o: In function `restore_pblist_ptr': ftrace.c:(.toc+0xdc0): undefined reference to `epapr_ev_idle_start' ftrace.c:(.toc+0xdd0): undefined reference to `epapr_ev_idle' Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
- 25 3月, 2013 3 次提交
-
-
由 Chen Gang 提交于
The FWNMI region is fixed at 0x7000 and the vector are now overflowing that with allmodconfig. Fix that by moving slb_miss_realmode code out of that region as it doesn't need to be that close to the call sites (it is a _GLOBAL function) Fixes this build error: arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:1304: Error: attempt to move .org backwards Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
由 Linus Torvalds 提交于
Merge tag 'pinctrl-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "Here are a few pinctrl fixes for the v3.9 rc series: - Usecount bounds checking so we do not go below zero on mux usecounts. - Loop range checking in GPIO ranges in the DT range parser. - Proper print in debugfs for pinconf state. - Fix compilation bug in generic pinconf code. - Minor bugfixes to abx500 and mvebu drivers." * tag 'pinctrl-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinmux: forbid mux_usecount to be set at UINT_MAX pinctrl: mvebu: fix checking for SoC specific controls pinctrl: generic: Fix compilation error pinctrl: Print the correct information in debugfs pinconf-state file pinctrl: abx500: Fix checking if pin use AlternateFunction register gpio: fix wrong checking condition for gpio range
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Peter Anvin: "A collection of minor fixes, more EFI variables paranoia (anti-bricking) plus the ability to disable the pstore either as a runtime default or completely, due to bricking concerns." * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efivars: Fix check for CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE x86, microcode_intel_early: Mark apply_microcode_early() as cpuinit efivars: Handle duplicate names from get_next_variable() efivars: explicitly calculate length of VariableName efivars: Add module parameter to disable use as a pstore backend efivars: Allow disabling use as a pstore backend x86-32, microcode_intel_early: Fix crash with CONFIG_DEBUG_VIRTUAL x86-64: Fix the failure case in copy_user_handle_tail()
-
- 24 3月, 2013 9 次提交
-
-
由 H. Peter Anvin 提交于
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "These are mostly minor fixes this time around. The iscsi-target CHAP big-endian bugfix and bump FD_MAX_SECTORS=2048 default patch to allow 1MB sized I/Os for FILEIO backends on >= v3.5 code are both CC'ed to stable. Also, there is a persistent reservations regression that has recently been reported for >= v3.8.x code, that is currently being tracked down for v3.9." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/pscsi: Reject cross page boundary case in pscsi_map_sg target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/Os tcm_vhost: Flush vhost_work in vhost_scsi_flush() tcm_vhost: Add missed lock in vhost_scsi_clear_endpoint() target: fix possible memory leak in core_tpg_register() target/iscsi: Fix mutual CHAP auth on big-endian arches target_core_sbc: use noop for SYNCHRONIZE_CACHE
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md fixes from NeilBrown: "A few bugfixes for md - recent regressions in raid5 - recent regressions in dmraid - a few instances of CONFIG_MULTICORE_RAID456 linger Several tagged for -stable" * tag 'md-3.9-fixes' of git://neil.brown.name/md: md: remove CONFIG_MULTICORE_RAID456 entirely md/raid5: ensure sync and DISCARD don't happen at the same time. MD: Prevent sysfs operations on uninitialized kobjects MD RAID5: Avoid accessing gendisk or queue structs when not available md/raid5: schedule_construction should abort if nothing to do.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
Pull libata updates from Jeff Garzik: "Simple stuff. See one-line summaries." * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_samsung_cf: use module_platform_driver_probe() [libata] Avoid specialized TLA's in ZPODD's Kconfig libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resource sata_fsl: Remove redundant NULL check before kfree ahci: Add Device IDs for Intel Wellsburg PCH ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "One bugfix for the tegra driver. Two updates regarding email addresses and MAINTAINERS which I like to have up-to-date so people can be reached immediately. While we are here, there is on PCI_ID addition." * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: add maintainer entry for atmel i2c driver i2c: Fix my e-mail address in drivers and documentation i2c: iSMT: add Intel Avoton DeviceIDs i2c: tegra: check the clk_prepare_enable() return value
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fixes from Wim Van Sebroeck: "Fix a boot issues and correct the AcpiMmioSel bitmask in the sp5100_tco watchdog device driver" * git://www.linux-watchdog.org/linux-watchdog: watchdog: sp5100_tco: Set the AcpiMmioSel bitmask value to 1 instead of 2 watchdog: sp5100_tco: Remove code that may cause a boot failure
-
由 Torsten Duwe 提交于
When KMS has parsed an EDID "detailed timing", it leaves the frame rate zeroed. Consecutive (debug-) output of that mode thus yields 0 for vsync. This simple fix also speeds up future invocations of drm_mode_vrefresh(). While it is debatable whether this qualifies as a -stable fix I'd apply it for consistency's sake; drm_helper_probe_single_connector_modes() does the same thing already for all probed modes. Cc: stable@vger.kernel.org Signed-off-by: NTorsten Duwe <duwe@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Torsten Duwe 提交于
EDID spreads some values across multiple bytes; bit-fiddling is needed to retrieve these. The current code to parse "detailed timings" has a cut&paste error that results in a vsync offset of at most 15 lines instead of 63. See http://en.wikipedia.org/wiki/EDID and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why that needs to be a left shift. Cc: stable@vger.kernel.org Signed-off-by: NTorsten Duwe <duwe@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 3月, 2013 23 次提交
-
-
git://git.infradead.org/users/willy/linux-nvme由 Linus Torvalds 提交于
Pull NVMe driver update from Matthew Wilcox: "These patches have mostly been baking for a few months; sorry I didn't get them in during the merge window. They're all bug fixes, except for the addition of the SMART log and the addition to MAINTAINERS." * git://git.infradead.org/users/willy/linux-nvme: NVMe: Add namespaces with no LBA range feature MAINTAINERS: Add entry for the NVMe driver NVMe: Initialize iod nents to 0 NVMe: Define SMART log NVMe: Add result to nvme_get_features NVMe: Set result from user admin command NVMe: End queued bio requests when freeing queue NVMe: Free cmdid on nvme_submit_bio error
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mqueue: sys_mq_open: do not call mnt_drop_write() if read-only mm/hotplug: only free wait_table if it's allocated by vmalloc dma-debug: update DMA debug API to better handle multiple mappings of a buffer dma-debug: fix locking bug in check_unmap() drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR drivers/video/ep93xx-fb.c: include <linux/io.h> for devm_ioremap() drivers/rtc/rtc-da9052.c: fix for rtc device registration mm: zone_end_pfn is too small poweroff: change orderly_poweroff() to use schedule_work() mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting printk: Provide a wake_up_klogd() off-case irq_work.h: fix warning when CONFIG_IRQ_WORK=n
-
由 Vladimir Davydov 提交于
mnt_drop_write() must be called only if mnt_want_write() succeeded, otherwise the mnt_writers counter will diverge. mnt_writers counters are used to check if remounting FS as read-only is OK, so after an extra mnt_drop_write() call, it would be impossible to remount mqueue FS as read-only. Besides, on umount a warning would be printed like this one: ===================================== [ BUG: bad unlock balance detected! ] 3.9.0-rc3 #5 Not tainted ------------------------------------- a.out/12486 is trying to release lock (sb_writers) at: mnt_drop_write+0x1f/0x30 but there are no more locks to release! Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Cc: Doug Ledford <dledford@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jianguo Wu 提交于
zone->wait_table may be allocated from bootmem, it can not be freed. Signed-off-by: NJianguo Wu <wujianguo@huawei.com> Reviewed-by: NTang Chen <tangchen@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexander Duyck 提交于
There were reports of the igb driver unmapping buffers without calling dma_mapping_error. On closer inspection issues were found in the DMA debug API and how it handled multiple mappings of the same buffer. The issue I found is the fact that the debug_dma_mapping_error would only set the map_err_type to MAP_ERR_CHECKED in the case that the was only one match for device and device address. However in the case of non-IOMMU, multiple addresses existed and as a result it was not setting this field once a second mapping was instantiated. I have resolved this by changing the search so that it instead will now set MAP_ERR_CHECKED on the first buffer that matches the device and DMA address that is currently in the state MAP_ERR_NOT_CHECKED. A secondary side effect of this patch is that in the case of multiple buffers using the same address only the last mapping will have a valid map_err_type. The previous mappings will all end up with map_err_type set to MAP_ERR_CHECKED because of the dma_mapping_error call in debug_dma_map_page. However this behavior may be preferable as it means you will likely only see one real error per multi-mapped buffer, versus the current behavior of multiple false errors mer multi-mapped buffer. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Reviewed-by: NShuah Khan <shuah.khan@hp.com> Tested-by: NShuah Khan <shuah.khan@hp.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexander Duyck 提交于
In check_unmap() it is possible to get into a dead-locked state if dma_mapping_error is called. The problem is that the bucket is locked in check_unmap, and locked again by debug_dma_mapping_error which is called by dma_mapping_error. To resolve that we must release the lock on the bucket before making the call to dma_mapping_error. [akpm@linux-foundation.org: restore 80-col trickery to be consistent with the rest of the file] Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Reviewed-by: NShuah Khan <shuah.khan@hp.com> Tested-by: NShuah Khan <shuah.khan@hp.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicolas Ferre 提交于
On some revisions of AT91 SoCs, the RTC IMR register is not working. Instead of elaborating a workaround for that specific SoC or IP version, we simply use a software variable to store the Interrupt Mask Register and modify it for each enabling/disabling of an interrupt. The overhead of this is negligible anyway. The interrupt mask register (IMR) for the RTC is broken on the AT91SAM9x5 sub-family of SoCs (good overview of the members here: http://www.eewiki.net/display/linuxonarm/AT91SAM9x5 ). The "user visible effect" is the RTC doesn't work. That sub-family is less than two years old and only has devicetree (DT) support and came online circa lk 3.7 . The dust is yet to settle on the DT stuff at least for AT91 SoCs (translation: lots of stuff is still broken, so much that it is hard to know where to start). The fix in the patch is pretty simple: just shadow the silicon IMR register with a variable in the driver. Some older SoCs (pre-DT) use the the rtc-at91rm9200 driver (e.g. obviously the AT91RM9200) and they should not be impacted by the change. There shouldn't be a large volume of interrupts associated with a RTC. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Reported-by: NDouglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 H Hartley Sweeten 提交于
Commit be867814 ("drivers/video/ep93xx-fb.c: use devm_ functions") introduced a build error: drivers/video/ep93xx-fb.c: In function 'ep93xxfb_probe': drivers/video/ep93xx-fb.c:532: error: implicit declaration of function 'devm_ioremap' drivers/video/ep93xx-fb.c:533: warning: assignment makes pointer from integer without a cast Include <linux/io.h> to pickup the declaration of 'devm_ioremap'. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: NRyan Mallon <rmallon@gmail.com> Cc: Damien Cassou <damien.cassou@lifl.fr> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ashish Jangam 提交于
Add support for the virtual irq since now MFD only handles virtual irq Without this patch rtc device will fail in registration. (akpm: Ashish has a different version whcih will be needed for 3.8.x and earlier kernels) Signed-off-by: NAshish <ashish.jangam@kpitcummins.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russ Anderson 提交于
Booting with 32 TBytes memory hits BUG at mm/page_alloc.c:552! (output below). The key hint is "page 4294967296 outside zone". 4294967296 = 0x100000000 (bit 32 is set). The problem is in include/linux/mmzone.h: 530 static inline unsigned zone_end_pfn(const struct zone *zone) 531 { 532 return zone->zone_start_pfn + zone->spanned_pages; 533 } zone_end_pfn is "unsigned" (32 bits). Changing it to "unsigned long" (64 bits) fixes the problem. zone_end_pfn() was added recently in commit 108bcc96 ("mm: add & use zone_end_pfn() and zone_spans_pfn()") Output from the failure. No AGP bridge found page 4294967296 outside zone [ 4294967296 - 4327469056 ] ------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:552! invalid opcode: 0000 [#1] SMP Modules linked in: CPU 0 Pid: 0, comm: swapper Not tainted 3.9.0-rc2.dtp+ #10 RIP: free_one_page+0x382/0x430 Process swapper (pid: 0, threadinfo ffffffff81942000, task ffffffff81955420) Call Trace: __free_pages_ok+0x96/0xb0 __free_pages+0x25/0x50 __free_pages_bootmem+0x8a/0x8c __free_memory_core+0xea/0x131 free_low_memory_core_early+0x4a/0x98 free_all_bootmem+0x45/0x47 mem_init+0x7b/0x14c start_kernel+0x216/0x433 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x144/0x153 Code: 89 f1 ba 01 00 00 00 31 f6 d3 e2 4c 89 ef e8 66 a4 01 00 e9 2c fe ff ff 0f 0b eb fe 0f 0b 66 66 2e 0f 1f 84 00 00 00 00 00 eb f3 <0f> 0b eb fe 0f 0b 0f 1f 84 00 00 00 00 00 eb f6 0f 0b eb fe 49 Signed-off-by: NRuss Anderson <rja@sgi.com> Reported-by: NGeorge Beshers <gbeshers@sgi.com> Acked-by: NHedi Berriche <hedi@sgi.com> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
David said: Commit 6c0c0d4d ("poweroff: fix bug in orderly_poweroff()") apparently fixes one bug in orderly_poweroff(), but introduces another. The comments on orderly_poweroff() claim it can be called from any context - and indeed we call it from interrupt context in arch/powerpc/platforms/pseries/ras.c for example. But since that commit this is no longer safe, since call_usermodehelper_fns() is not safe in interrupt context without the UMH_NO_WAIT option. orderly_poweroff() can be used from any context but UMH_WAIT_EXEC is sleepable. Move the "force" logic into __orderly_poweroff() and change orderly_poweroff() to use the global poweroff_work which simply calls __orderly_poweroff(). While at it, remove the unneeded "int argc" and change argv_split() to use GFP_KERNEL. We use the global "bool poweroff_force" to pass the argument, this can obviously affect the previous request if it is pending/running. So we only allow the "false => true" transition assuming that the pending "true" should succeed anyway. If schedule_work() fails after that we know that work->func() was not called yet, it must see the new value. This means that orderly_poweroff() becomes async even if we do not run the command and always succeeds, schedule_work() can only fail if the work is already pending. We can export __orderly_poweroff() and change the non-atomic callers which want the old semantics. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: NDavid Gibson <david@gibson.dropbear.id.au> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Feng Hong <hongfeng@marvell.com> Cc: Kees Cook <keescook@chromium.org> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanpeng Li 提交于
hugetlb_total_pages is used for overcommit calculations but the current implementation considers only the default hugetlb page size (which is either the first defined hugepage size or the one specified by default_hugepagesz kernel boot parameter). If the system is configured for more than one hugepage size, which is possible since commit a137e1cc ("hugetlbfs: per mount huge page sizes") then the overcommit estimation done by __vm_enough_memory() (resp. shown by meminfo_proc_show) is not precise - there is an impression of more available/allowed memory. This can lead to an unexpected ENOMEM/EFAULT resp. SIGSEGV when memory is accounted. Testcase: boot: hugepagesz=1G hugepages=1 the default overcommit ratio is 50 before patch: egrep 'CommitLimit' /proc/meminfo CommitLimit: 55434168 kB after patch: egrep 'CommitLimit' /proc/meminfo CommitLimit: 54909880 kB [akpm@linux-foundation.org: coding-style tweak] Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: NMichal Hocko <mhocko@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: <stable@vger.kernel.org> [3.0+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Frederic Weisbecker 提交于
wake_up_klogd() is useless when CONFIG_PRINTK=n because neither printk() nor printk_sched() are in use and there are actually no waiter on log_wait waitqueue. It should be a stub in this case for users like bust_spinlocks(). Otherwise this results in this warning when CONFIG_PRINTK=n and CONFIG_IRQ_WORK=n: kernel/built-in.o In function `wake_up_klogd': (.text.wake_up_klogd+0xb4): undefined reference to `irq_work_queue' To fix this, provide an off-case for wake_up_klogd() when CONFIG_PRINTK=n. There is much more from console_unlock() and other console related code in printk.c that should be moved under CONFIG_PRINTK. But for now, focus on a minimal fix as we passed the merged window already. [akpm@linux-foundation.org: include printk.h in bust_spinlocks.c] Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Reported-by: NJames Hogan <james.hogan@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 James Hogan 提交于
A randconfig caught repeated compiler warnings when CONFIG_IRQ_WORK=n due to the definition of a non-inline static function in <linux/irq_work.h>: include/linux/irq_work.h +40 : warning: 'irq_work_needs_cpu' defined but not used Make it inline to supress the warning. This is caused commit 00b42959 ("irq_work: Don't stop the tick with pending works") merged in v3.9-rc1. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Takahisa Tanaka 提交于
The AcpiMmioSel bit is bit 1 in the AcpiMmioEn register, but the current sp5100_tco driver is using bit 2. See 2.3.3 Power Management (PM) Registers page 150 of the AMD SB800-Series Southbridges Register Reference Guide [1]. AcpiMmioEn - RW – 8/16/32 bits - [PM_Reg: 24h] Field Name Bits Default Description AcpiMMioDecodeEn 0 0b Set to 1 to enable AcpiMMio space. AcpiMMIoSel 1 0b Set AcpiMMio registers to be memory-mapped or IO-mapped space. 0: Memory-mapped space 1: I/O-mapped space The sp5100_tco driver expects zero as a value of AcpiMmioSel (bit 1). Fortunately, no problems were caused by this typo, because the default value of the undocumented misused bit 2 seems to be zero. However, the sp5100_tco driver should use the correct bitmask value. [1] http://support.amd.com/us/Embedded_TechDocs/45482.pdfSigned-off-by: NTakahisa Tanaka <mc74hc00@gmail.com> Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
-
由 Takahisa Tanaka 提交于
A problem was found on PC's with the SB700 chipset: The PC fails to load BIOS after running the 3.8.x kernel until the power is completely cut off. It occurs in all 3.8.x versions and the mainline version as of 2/4. The issue does not occur with the 3.7.x builds. There are two methods for accessing the watchdog registers. 1. Re-programming a resource address obtained by allocate_resource() to chipset. 2. Use the direct memory-mapped IO access. The method 1 can be used by all the chipsets (SP5100, SB7x0, SB8x0 or later). However, experience shows that only PC with the SB8x0 (or later) chipsets can use the method 2. This patch removes the method 1, because the critical problem was found. That's why the watchdog timer was able to be used on SP5100 and SB7x0 chipsets until now. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1116835 Link: https://lkml.org/lkml/2013/2/14/271Signed-off-by: NTakahisa Tanaka <mc74hc00@gmail.com> Signed-off-by: NWim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
-
由 Ben Hutchings 提交于
The 'CONFIG_' prefix is not implicit in IS_ENABLED(). Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fix from Marcelo Tosatti: "Fix compilation on PPC with !CONFIG_KVM" * git://git.kernel.org/pub/scm/virt/kvm/kvm: Revert "KVM: allow host header to be included even for !CONFIG_KVM"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg Kroah-Hartman: "Here are a number of USB fixes that resolve issues that have been reported against 3.9-rc3." * tag 'usb-3.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (37 commits) USB: ti_usb_3410_5052: fix use-after-free in TIOCMIWAIT USB: ssu100: fix use-after-free in TIOCMIWAIT USB: spcp8x5: fix use-after-free in TIOCMIWAIT USB: quatech2: fix use-after-free in TIOCMIWAIT USB: pl2303: fix use-after-free in TIOCMIWAIT USB: oti6858: fix use-after-free in TIOCMIWAIT USB: mos7840: fix use-after-free in TIOCMIWAIT USB: mos7840: fix broken TIOCMIWAIT USB: mct_u232: fix use-after-free in TIOCMIWAIT USB: io_ti: fix use-after-free in TIOCMIWAIT USB: io_edgeport: fix use-after-free in TIOCMIWAIT USB: ftdi_sio: fix use-after-free in TIOCMIWAIT USB: f81232: fix use-after-free in TIOCMIWAIT USB: cypress_m8: fix use-after-free in TIOCMIWAIT USB: ch341: fix use-after-free in TIOCMIWAIT USB: ark3116: fix use-after-free in TIOCMIWAIT USB: serial: add modem-status-change wait queue USB: serial: fix interface refcounting USB: io_ti: fix get_icount for two port adapters USB: garmin_gps: fix memory leak on disconnect ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Mostly HD-audio and USB-audio regression fixes: - Oops fix at unloading of snd-hda-codec-conexant module - A few trivial regression fixes for Cirrus and Conexant HD-audio codecs - Relax the USB-audio descriptor parse errors as non-fatal - Fix locking of HD-audio CA0132 DSP loader - Fix the generic HD-audio parser for VIA codecs" * tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix DAC assignment for independent HP ALSA: hda - Fix abuse of snd_hda_lock_devices() for DSP loader ALSA: hda - Fix typo in checking IEC958 emphasis bit ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls() ALSA: snd-usb: mixer: propagate errors up the call chain ALSA: usb: Parse UAC2 extension unit like for UAC1 ALSA: hda - Fix yet missing GPIO/EAPD setup in cirrus driver ALSA: hda/cirrus - Fix the digital beep registration ALSA: hda - Fix missing beep detach in patch_conexant.c ALSA: documentation: Fix typo in Documentation/sound
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
Pull EDAC fixes from Borislav Petkov: "A fix from Mauro to correct csrow size accounting in sysfs and a sparse fix from Stephen Hemminger." * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Merge mci.mem_is_per_rank with mci.csbased amd64_edac: Correct DIMM sizes EDAC: Make sysfs functions static
-
由 Keith Busch 提交于
The LBA Range Type feature is optional in the NVMe specification, so we should continue with adding namespaces for controllers that do not implement this feature. Signed-off-by: NKeith Busch <keith.busch@intel.com> Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
-
由 Linus Torvalds 提交于
Dave Jones found another /proc issue with his Trinity tool: thanks to the namespace model, we can have multiple /proc dentries that point to the same inode, aliasing directories in /proc/<pid>/net/ for example. This ends up being a total disaster, because it acts like hardlinked directories, and causes locking problems. We rely on the topological sort of the inodes pointed to by dentries, and if we have aliased directories, that odering becomes unreliable. In short: don't do this. Multiple dentries with the same (directory) inode is just a bad idea, and the namespace code should never have exposed things this way. But we're kind of stuck with it. This solves things by just always allocating a new inode during /proc dentry lookup, instead of using "iget_locked()" to look up existing inodes by superblock and number. That actually simplies the code a bit, at the cost of potentially doing more inode [de]allocations. That said, the inode lookup wasn't free either (and did a lot of locking of inodes), so it is probably not that noticeable. We could easily keep the old lookup model for non-directory entries, but rather than try to be excessively clever this just implements the minimal and simplest workaround for the problem. Reported-and-tested-by: NDave Jones <davej@redhat.com> Analyzed-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 3月, 2013 4 次提交
-
-
由 Marcelo Tosatti 提交于
This reverts commit f445f11e as it breaks PPC with CONFIG_KVM=n. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Ludovic Desroches 提交于
Create an entry for atmel i2c driver: i2c-at91.c Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
由 Guenter Roeck 提交于
My old e-mail address is no longer working. Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
由 Seth Heasley 提交于
This patch adds the iSMT SMBus Controller DeviceIDs for the Intel Avoton SOC. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-