- 21 7月, 2016 23 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Do it right after probe_machine() since it's about testing ppc_md, and put the test in the common code. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
It makes more sense to do it before intializing xmon() as xmon might use the info in there. We do want to register the console early though in case we want some functioning printk's in the cpu map setup. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
Matches 64-bit. Also move the call to the same spot as ppc64 Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
And kill setup_system(). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
Also remove the completely osbolete comment. We *do* look in the device-tree. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
It is now called right after platform probe, so the probe function can just do the job. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
This converts all the 32-bit platforms to use the expanded device-tree which is a pretty mechanical change. Unlike 64-bit, the 32-bit kernel didn't rely on platform initializations to setup the MMU since it sets it up entirely before probe_machine() so the move has comparatively less consequences though it's a bigger patch. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
We no long need the machine type that early, so we can move probe_machine() to after the device-tree has been expanded. This will allow further consolidation. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
Anything in there will be overwritten, so it helps catching nasty bugs if we check that it's indeed full of NULL's before we do so. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
Moving probe_machine() to after mmu init will cause the ppc_md fields relative to the hash table management to be overwritten. Since we have essentially disconnected the machine type from the hash backend ops, finish the job by moving them to a different structure. The only callback that didn't quite fix is update_partition_table since this is not specific to hash, so I moved it to a standalone variable for now. We can revisit later if needed. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fix ppc64e build failure in kexec] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
pmac_declare_of_platform_devices() is already a machine initcall, thus it won't be called on a non-powermac machine. Testing for chrp there is pointless. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
Instead, check for FW_FEATURE_SPLPAR. This should be roughtly equivalent as all pseries machiens that can have an HEA also support SPLPAR and no other machine type does. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
Use the device-tree instead as we'll be moving probe_machine() out of early_setup Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
These days, memblocks is available later, so we can just allocate it as part of iob_init. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
We move it into early_mmu_init() based on firmware features. For PS3, we have to move the setting of these into early_init_devtree(). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
The SMU command buffer needs to be allocated below 2G using memblock. In the past, this had to be done very early from the arch code as memblock wasn't available past that point. That is no longer the case though, smu_init() is called from setup_arch() when memblock is still functional these days. So move the allocation to the SMU driver itself. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
The various calls to establish exception endianness and AIL are now done from a single point using already established CPU and FW feature bits to decide what to do. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
We move the function itself to pseries/firmware.c and call it along with almost all other flat device-tree parsers from early_init_devtree() Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Move #ifdefs into the header by providing pseries_probe_fw_features()] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
Instead of punching a hole in the linear mapping, just use normal cachable memory, and apply the flush sequence documented in the CPC625 (aka U3) user manual. This allows us to remove quite a bit of code related to the early allocation of the DART and the hole in the linear mapping. We can also get rid of the copy of the DART for suspend/resume as the original memory can just be saved/restored now, as long as we properly sync the caches. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Integrate dart_init() fix to return ENODEV when DART disabled] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
There is really no need to do them that early, early_setup() runs before MMU is on, we should do the strict minimum there to get the MMU going. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
Make it part of early_setup() as we really want the feature fixups to be applied before we turn on the MMU since they can have an impact on the various assembly path related to MMU management and interrupts. This makes 64-bit match what 32-bit does. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
32 and 64-bit do a similar set of calls early on, we move it all to a single common function to make the boot code more readable. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 20 7月, 2016 2 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This provides an equivalent of of_fdt_match() for non-flat trees. This is more practical than matching an array of of_device_id structs when converting a bunch of existing users of of_fdt_match(). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Tyrel Datwyler 提交于
The underlying slot hotplug registration code assumed multiple slots, but the actual implementation is broken for multiple slots. This went unnoticed for years do to the fact that PowerVM seems to only ever provide a single hotplug slot per PHB. Under qemu/kvm the hotplug slot model aligns more with x86 where multiple slots are presented under a single PHB. As seen in the following each additional slot after the first fails to register due to each slot always being compared against the first child node of the PHB in the device tree. rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 rpaphp: Slot [Slot 0] registered rpaphp: pci_hp_register failed with error -16 rpaphp: pci_hp_register failed with error -16 rpaphp: pci_hp_register failed with error -16 rpaphp: pci_hp_register failed with error -16 The registration logic is fixed so that each slot is compared against the existing child devices of the PHB in the device tree to determine present slots vs empty slots. rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 rpaphp: Slot [C0] registered rpaphp: Slot [C1] registered rpaphp: Slot [C2] registered rpaphp: Slot [C3] registered rpaphp: Slot [C4] registered Signed-off-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> [mpe: Massage changelog] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 19 7月, 2016 10 次提交
-
-
由 Kevin Hao 提交于
It is seldom used in the kernel code and can be easily replaced by either RELOCATABLE or PPC32. So there is no reason to keep a separate kernel option for this. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Kevin Hao 提交于
It makes no sense to keep two separate RELOCATABLE config entries for ppc32 and ppc64 respectively. Merge them into one and move it to a common place. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Kevin Hao 提交于
In the current code, the RELOCATABLE will be forcedly enabled when enabling CRASH_DUMP. But for ppc32, the RELOCABLE also depend on ADVANCED_OPTIONS and select NONSTATIC_KERNEL. This will cause the following build error when CRASH_DUMP=y && ADVANCED_OPTIONS=n because the select of NONSTATIC_KERNEL doesn't take effect. arch/powerpc/include/asm/io.h: In function 'virt_to_phys': arch/powerpc/include/asm/page.h:113:26: error: 'virt_phys_offset' undeclared (first use in this function) #define VIRT_PHYS_OFFSET virt_phys_offset ^ It doesn't have any strong reasons to make the RELOCATABLE depend on ADVANCED_OPTIONS. So remove this dependency to fix this issue. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 John Allen 提交于
The sysfs interface used to handle PowerVM hotplug events should use the hotplug queue as well. PRRN events will soon be placing many hotplug events on the queue at once and we will need ordinary hotplug events to use the queue as well in order to ensure these events will still be handled and that proper serialization is maintained during the PRRN event. Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com> Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 John Allen 提交于
Add handler for new hotplug interrupt. For memory and CPU hotplug events, we will add the hotplug errorlog to the hotplug workqueue. Since PCI hotplug is not currently supported in the kernel, PCI hotplug events are written to the rtas_log_bug and are handled by rtas_errd. Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com> Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 John Allen 提交于
In support of PAPR changes to add a new hotplug interrupt, introduce a hotplug workqueue to avoid processing hotplug events in interrupt context. We will also take advantage of the queue on PowerVM to ensure hotplug events initiated from different sources (HMC and PRRN events) are handled and serialized properly. Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com> Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Andrew Donnellan 提交于
If kzalloc() fails when allocating adapter->guest in cxl_guest_init_adapter(), we call free_adapter() before erroring out. free_adapter() in turn attempts to dereference adapter->guest, which in this case is NULL. In free_adapter(), skip the adapter->guest cleanup if adapter->guest is NULL. Fixes: 14baf4d9 ("cxl: Add guest-specific code") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Andrew Donnellan 提交于
Remove the CXL_KERNEL_API and CXL_EEH Kconfig options, as they were only needed to coordinate the merging of the cxlflash driver. Also remove the stub implementation of cxl_perst_reloads_same_image() in cxlflash which is only used if CXL_EEH isn't defined (i.e. never). Suggested-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Acked-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Ian Munsie 提交于
pnv_cxl_enable_phb_kernel_api() grabs a reference to the cxl module to prevent it from being unloaded after the PHB has been switched to CX4 mode. This breaks the build when CONFIG_MODULES=n as module_mutex doesn't exist. However, if we don't have modules, we don't need to protect against the case of the cxl module being unloaded. As such, split the relevant code out into a function surrounded with #if IS_MODULE(CXL) so we don't try to compile it if cxl isn't being compiled as a module. Fixes: 5918dbc9b4ec ("powerpc/powernv: Add support for the cxl kernel api on the real phb") Reported-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
This makes it easy to verify we are not overloading the bits. No functionality change by this patch. mpe: Cleanup more. Completely fixup whitespace, convert all UL values to ASM_CONST(), and replace all occurrences of 63-x with the actual shift. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 17 7月, 2016 5 次提交
-
-
由 Aneesh Kumar K.V 提交于
This patch adds the kernel command line disable_radix which disable the radix MMU mode even if firmware indicates radix support via ibm,pa-features device tree node. This helps in testing different MMU mode easily. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We add a tlb flush variant, to flush LPID mappings. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
This update the machine dep callback such that we can use the same callback to register process table. The interface is updated such that we can easily call H_REGISTER_PROC_TBL hcall. The HCALL itself is introduced in a later patch. No functionality change introduced by this patch. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
Update the PID switch as per ISA doc. slbia is needed in radix to invalidate any implementation specific lookaside information. We use the .long format due to build errors with the below compiler version. gcc (Ubuntu 5.3.1-14ubuntu2.1) 5.3.1 20160413 GNU assembler (GNU Binutils for Ubuntu) 2.26 CC arch/powerpc/mm//mmu_context_book3s64.o {standard input}: Assembler messages: {standard input}:506: Error: junk at end of line: `0x7' scripts/Makefile.build:291: recipe for target 'arch/powerpc/mm//mmu_context_book3s64.o' failed make[1]: *** [arch/powerpc/mm//mmu_context_book3s64.o] Error 1 Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
ISA 3.0 document hash table size in bytes = 2^(HTABSIZE + 18) No functionality change by this patch. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-