We can often deal with PCI resource issues by moving devices around.  In
that case, there's no point in alarming the user with messages like these.
There are many bug reports where the message itself is the only problem,
e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/413419 .
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix build breakage

In commit 0ac0c0d0
cpusets: randomize node rotor used in cpuset_mem_spread_node()

Jack Steiner fixed a problem with too many small tasks being
assigned to node 0. Copy his code to ia64 to avoid build error.

    arch/ia64/kernel/smpboot.c:641: error: ‘cpu_to_node_map’ undeclared (first use in this function)

In commit 3bccd996
numa: ia64: use generic percpu var numa_node_id() implementation

Lee Schermerhorn added some set_numa_node() calls - but these
only work on CONFIG_NUMA=y configurations. Surround the calls
with #ifdef CONFIG_NUMA
Signed-off-by: NTony Luck <tony.luck@intel.com>

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits)
  tracing: Add __used annotation to event variable
  perf, trace: Fix !x86 build bug
  perf report: Support multiple events on the TUI
  perf annotate: Fix up usage of the build id cache
  x86/mmiotrace: Remove redundant instruction prefix checks
  perf annotate: Add TUI interface
  perf tui: Remove annotate from popup menu after failure
  perf report: Don't start the TUI if -D is used
  perf: Fix getline undeclared
  perf: Optimize perf_tp_event_match()
  perf: Remove more code from the fastpath
  perf: Optimize the !vmalloc backed buffer
  perf: Optimize perf_output_copy()
  perf: Fix wakeup storm for RO mmap()s
  perf-record: Share per-cpu buffers
  perf-record: Remove -M
  perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers
  perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events
  perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction
  perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig
  ...

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  gta02: Use pcf50633 backlight driver instead of platform backlight driver.
  backlight: pcf50633: Register a pcf50633-backlight device in pcf50633 core driver.
  backlight: Add pcf50633 backlight driver
  backlight: 88pm860x_bl: fix error handling in pm860x_backlight_probe
  backlight: max8925_bl: Fix error handling path
  backlight: l4f00242t03: fix error handling in l4f00242t03_probe
  backlight: add S6E63M0 AMOLED LCD Panel driver
  backlight: adp8860: add support for ADP8861 & ADP8863
  backlight: mbp_nvidia_bl - Fix DMI_SYS_VENDOR for MacBook1,1
  backlight: Add Cirrus EP93xx backlight driver
  backlight: l4f00242t03: Fix regulators handling code in remove function
  backlight: fix adp8860_bl build errors
  backlight: new driver for the ADP8860 backlight parts
  backlight: 88pm860x_bl - potential memory leak
  backlight: mbp_nvidia_bl - add support for older MacBookPro and MacBook 6,1.
  backlight: Kconfig cleanup
  backlight: backlight_device_register() return ERR_PTR()

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Add mx31moboard MC13783 led support
  leds: Add mc13783 LED support
  leds: leds-ss4200: fix led_classdev_unregister twice in error handling
  leds: leds-lp3944: properly handle lp3944_configure fail in lp3944_probe
  leds: led-class: set permissions on max_brightness file to 0444
  leds: leds-gpio: Change blink_set callback to be able to turn off blinking
  leds: Add LED driver for the Soekris net5501 board
  leds: 88pm860x - fix checking in probe function

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits)
  hwmon: (lm75) Add support for the Texas Instruments TMP105
  hwmon: (ltc4245) Read only one GPIO pin
  hwmon: (dme1737) Add SCH5127 support
  hwmon: (tmp102) Don't always stop chip at exit
  hwmon: (tmp102) Fix suspend and resume functions
  hwmon: (tmp102) Various fixes
  hwmon: Driver for TI TMP102 temperature sensor
  hwmon: EMC1403 thermal sensor support
  hwmon: (applesmc) Add temperature sensor labels to sysfs interface
  hwmon: (applesmc) Add generic support for MacBook Pro 7
  hwmon: (applesmc) Add generic support for MacBook Pro 6
  hwmon: (applesmc) Add support for MacBook Pro 5,3 and 5,4
  hwmon: (tmp401) Reorganize code to get rid of static forward declarations
  hwmon: (tmp401) Use constants for sysfs file permissions
  hwmon: (adm1031) Allow setting update rate
  hwmon: Add description of the update_rate sysfs attribute
  hwmon: (lm90) Use programmed update rate
  hwmon: (f71882fg) Acquire I/O regions while we're working with them
  hwmon: (f71882fg) Code cleanup
  hwmon: (f71882fg) Use strict_stro(l|ul) instead of simple_strto$1
  ...

Add support for the Texas Instruments TMP105 temperature sensor
device.
Signed-off-by: NShubhrajyoti Datta <shubhrajyoti@ti.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Read only one of the GPIO pins as an analog voltage. The ADC can be
switched to a different GPIO pin at runtime, but this is not supported.

Previously, this driver would report the analog voltage of the currently
selected GPIO pin as all three GPIO voltages: in9_input, in10_input and
in11_input.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org

Add support for the hardware monitoring capabilities of the SCH5127
chip to the dme1737 driver.
Signed-off-by: NJuerg Haefliger <juergh@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NJeff Rickman <jrickman@myamigos.us>

Only stop the chip at driver exit if it was stopped when driver was
loaded. Leave it running otherwise.

Also restore the device configuration if probe failed, to not leave
the system in a dangling state.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Steven King <sfking@fdwdc.com>

Suspend and resume functions shouldn't overwrite the configuration
register. They should only alter the one bit they have to touch.

Also don't assume that register reads and writes always succeed.
Handle errors properly, shall they happen.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Steven King <sfking@fdwdc.com>

Fixes from my driver review:
http://lists.lm-sensors.org/pipermail/lm-sensors/2010-March/028051.html

Only the small changes are in there, more important changes will come
later separately as time permits.

* Drop the remnants of the now gone detect function
* The TMP102 has no known compatible chip
* Include the right header files
* Clarify why byte swapping of register values is needed
* Strip resolution info bit from temperature register value
* Set cache lifetime to 1/3 second
* Don't arbitrarily reject limit values; clamp as needed
* Make limit writing unconditional
* Don't check for transaction types the driver doesn't use
* Properly check for error when setting configuration
* Report error on failed probe
* Make the driver load automatically where needed
* Various other minor fixes
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Steven King <sfking@fdwdc.com>

Driver for the TI TMP102.

The TI TMP102 is similar to the LM75.  It differs from the LM75 by
having a 16-bit conf register and the temp registers have a minimum
resolution of 12 bits; the extended conf register can select 13-bit
resolution (which this driver does) and also change the update rate
(which this driver currently doesn't use).

[JD: Fix tmp102_exit tag, must be __exit, not __init.]
Signed-off-by: NSteven King <sfking@fdwdc.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Provides support for the EMC1403 thermal sensor. Only reporting of values
is supported. The various Moorestown specific extras to do with thermal
alerts and the like are not in this version of the driver.

Considerably edited and tidied up by Alan Cox, plus fixes and detection
bits from Jean Delvare.
Signed-off-by: NKalhan Trisal <kalhan.trisal@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The Apple SMC uses a systematic labeling scheme for the hardware
temperature sensors. This scheme is currently hidden from
userland. Since the sensor set, and consequently the numbering,
differs between models, an extensive database of configurations is
required for an application such as fan control. This patch adds the
SMC labels to the hwmon sysfs interface, allowing applications to use
the sensors more intelligibly.

[rydberg@euromail.se: fixed error handling]
Signed-off-by: NAlex Murray <murray.alex@gmail.com>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This patch adds generic support for the MacBook Pro 7 family
based on the 7,1 model.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This patch adds generic support for the MacBook Pro 6 family
based on the 6,2 model.

[rydberg@euromail.se: patch cleanup]
Signed-off-by: NBernhard Froemel <froemel@vmars.tuwien.ac.at>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The MacBookPro 5,3 model has two fans, whereas the 5,4 model has
only one. This patch adds explicit support for the 5,3 and 5,4 models.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Signed-off-by: NAndre Prendel <andre.prendel@gmx.de>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Replace octal representation of file permissions by the corresponding
constants.
Signed-off-by: NAndre Prendel <andre.prendel@gmx.de>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Based on earlier work by Ira W. Snyder.

The adm1031 chip is capable of using a runtime configurable sampling rate,
using the fan filter register. Add support for reading and setting the
update rate via sysfs.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NIra W. Snyder <iws@ovro.caltech.edu>

The update_rate attribute can be used by drivers to let userspace choose
the update rate of the chip, if it is configurable.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The lm90 driver programs the sensor chip to update its readings at 2 Hz
(500 ms between readings). However, the driver only does reads from the
chip at intervals of 2 * HZ (2000 ms between readings). Change the driver
update rate to the programmed update rate.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Acquire the I/O region for the Super I/O chip while we're working on it.
Signed-off-by: NGiel van Schijndel <me@mortis.eu>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Some code cleanup: properly use previously defined functions, rather
than duplicating their code.
Signed-off-by: NGiel van Schijndel <me@mortis.eu>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Use the strict_strol and strict_stroul functions instead of simple_strol
and simple_stroul respectively in sysfs functions.
Signed-off-by: NGiel van Schijndel <me@mortis.eu>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Fixed several coding style issues.
Signed-off-by: NGiel van Schijndel <me@mortis.eu>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The LM64 appears to be an LM63 with added GPIO lines. Add support for the
hwmon functionality - GPIO can be added at some later stage if someone
has a need for them.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

When the user passes the kernel parameter acpi_enforce_resources=lax,
the ACPI resources are no longer protected, so a native driver can
make use of them. In that case, we do not want the asus_atk0110 to be
loaded. Unfortunately, this driver loads automatically due to its
MODULE_DEVICE_TABLE, so the user ends up with two drivers loaded for
the same device - this is bad.

So I suggest that we prevent the asus_atk0110 driver from loading if
acpi_enforce_resources=lax.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NLuca Tettamanti <kronos.it@gmail.com>
Cc: Len Brown <lenb@kernel.org>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] fill out file list in s390 MAINTAINERS entry
  [S390] Add support for LZO-compressed kernels.
  [S390] cmm: get rid of CMM_PROC config option
  [S390] cmm: remove superfluous EXPORT_SYMBOLs plus cleanups
  [S390] dasd: unit check handling during internal cio I/O
  [S390] cio: unit check handling during internal I/O
  [S390] ccwgroup: add locking around drvdata access
  [S390] cio: remove stsch
  [S390] spp: remove KVM_AWARE_CMF config option
  [S390] kprobes: forbid probing of stnsm/stosm/epsw
  [S390] spp: fix compilation for CONFIG_32BIT
  [S390] atomic: implement atomic64_dec_if_positive
  [S390] cmm: fix crash on module unload

* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6:
  SFI: add sysfs interface for SFI tables.
  SFI: add support for v0.81 spec

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (27 commits)
  Btrfs: add more error checking to btrfs_dirty_inode
  Btrfs: allow unaligned DIO
  Btrfs: drop verbose enospc printk
  Btrfs: Fix block generation verification race
  Btrfs: fix preallocation and nodatacow checks in O_DIRECT
  Btrfs: avoid ENOSPC errors in btrfs_dirty_inode
  Btrfs: move O_DIRECT space reservation to btrfs_direct_IO
  Btrfs: rework O_DIRECT enospc handling
  Btrfs: use async helpers for DIO write checksumming
  Btrfs: don't walk around with task->state != TASK_RUNNING
  Btrfs: do aio_write instead of write
  Btrfs: add basic DIO read/write support
  direct-io: do not merge logically non-contiguous requests
  direct-io: add a hook for the fs to provide its own submit_bio function
  fs: allow short direct-io reads to be completed via buffered IO
  Btrfs: Metadata ENOSPC handling for balance
  Btrfs: Pre-allocate space for data relocation
  Btrfs: Metadata ENOSPC handling for tree log
  Btrfs: Metadata reservation for orphan inodes
  Btrfs: Introduce global metadata reservation
  ...

Commit e9fb7631 ("cpu-hotplug: introduce cpu_notify(),
__cpu_notify(), cpu_notify_nofail()") also introduced this annoying
warning:

  kernel/cpu.c:157: warning: 'cpu_notify_nofail' defined but not used

when CONFIG_HOTPLUG_CPU wasn't set.

So move that helper inside the #ifdef CONFIG_HOTPLUG_CPU region, and
simplify it while at it.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
  [SCSI] fix race in scsi_target_reap
  [SCSI] aacraid: Eliminate use after free
  [SCSI] arcmsr: Support HW reset for EH and polling scheme for scsi device
  [SCSI] bfa: fix system crash when reading sysfs fc_host statistics
  [SCSI] iscsi_tcp: remove sk_sleep check
  [SCSI] ipr: improve interrupt service routine performance
  [SCSI] ipr: set the data list length in the request control block
  [SCSI] ipr: fix a register read to use the correct address for 64 bit adapters
  [SCSI] ipr: include the resource path in the IOA status area structure
  [SCSI] ipr: implement fixes for 64 bit adapter support
  [SCSI] be2iscsi: correct return value in mgmt_invalidate_icds()

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: Make fsync sync new parent directories in no-journal mode
  ext4: Drop whitespace at end of lines
  ext4: Fix compat EXT4_IOC_ADD_GROUP
  ext4: Conditionally define compat ioctl numbers
  tracing: Convert more ext4 events to DEFINE_EVENT
  ext4: Add new tracepoints to track mballoc's buddy bitmap loads
  ext4: Add a missing trace hook
  ext4: restart ext4_ext_remove_space() after transaction restart
  ext4: Clear the EXT4_EOFBLOCKS_FL flag only when warranted
  ext4: Avoid crashing on NULL ptr dereference on a filesystem error
  ext4: Use bitops to read/modify i_flags in struct ext4_inode_info
  ext4: Convert calls of ext4_error() to EXT4_ERROR_INODE()
  ext4: Convert callers of ext4_get_blocks() to use ext4_map_blocks()
  ext4: Add new abstraction ext4_map_blocks() underneath ext4_get_blocks()
  ext4: Use our own write_cache_pages()
  ext4: Show journal_checksum option
  ext4: Fix for ext4_mb_collect_stats()
  ext4: check for a good block group before loading buddy pages
  ext4: Prevent creation of files larger than RLIMIT_FSIZE using fallocate
  ext4: Remove extraneous newlines in ext4_msg() calls
  ...

Fixed up trivial conflict in fs/ext4/fsync.c

* 'for-linus/2634-git-updates' of git://git.fluff.org/bjdooks/linux:
  ARM: S5PC100: Fixup cross tree merge problems
  ARM: S5P: Fix the platform external interrupt issues.
  ARM: s5pv210_defconfig: Update s5pv210_defconfig to v2.6.34-git
  ARM: s5pc110_defconfig: Update s5pc110_defconfig to v2.6.34-git
  ARM: s5pc100_defconfig: Update s5pc100_defconfig to v2.6.34-git
  ARM: s5p6442_defconfig: Update s5p6442_defconfig to v2.6.34-git
  ARM: s5p6440_defconfig: Update s5p6440_defconfig to v2.6.34-git
  ARM: s3c6400_defconfig: Update s3c6400_defconfig to v2.6.34-git
  ARM: s3c2410_defconfig: Update s3c2410_defconfig to v2.6.34-git

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: schedule for removal
  firewire: core: use separate timeout for each transaction
  firewire: core: Fix tlabel exhaustion problem
  firewire: core: make transaction label allocation more robust
  firewire: core: clean up config ROM related defined constants
  ieee1394: mark char device files as not seekable
  firewire: cdev: mark char device files as not seekable
  firewire: ohci: cleanups and fix for nonstandard build without debug facility
  firewire: ohci: wait for PHY register accesses to complete
  firewire: ohci: fix up configuration of TI chips
  firewire: ohci: enable 1394a enhancements
  firewire: ohci: do not clear PHY interrupt status inadvertently
  firewire: ohci: add a function for reading PHY registers

Trivial conflicts in Documentation/feature-removal-schedule.txt

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (24 commits)
  m68k: amiga - RTC platform device conversion
  m68k: amiga - Parallel port platform device conversion
  m68k: amiga - Serial port platform device conversion
  m68k: amiga - Mouse platform device conversion
  m68k: amiga - Keyboard platform device conversion
  m68k: amiga - Amiga Gayle IDE platform device conversion
  m68k: amiga - A4000T SCSI platform device conversion
  m68k/scsi: a3000 - Do not use legacy Scsi_Host.base
  m68k: amiga - A3000 SCSI platform device conversion
  m68k/scsi: gvp11 - Do not use legacy Scsi_Host.base
  m68k: amiga - GVP Series II SCSI zorro_driver conversion
  m68k/scsi: a2091 - Do not use legacy Scsi_Host.base
  m68k: amiga - A2091/A590 SCSI zorro_driver conversion
  m68k/scsi: mvme147 - Kill obsolete HOSTS_C logic
  m68k/scsi: a3000 - Kill a3000_scsiregs typedef
  m68k/scsi: gvp11 - Kill gvp11_scsiregs typedef
  m68k/scsi: a2091 - Kill a2091_scsiregs typedef
  m68k/scsi: gvp11 - Extract check_wd33c93()
  m68k/scsi: a3000 - Kill static global a3000_host
  m68k/scsi: mvme147 - Kill static global mvme147_host
  ...

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix another nfs_wb_page() deadlock
  NFS: Ensure that we mark the inode as dirty if we exit early from commit
  NFS: Fix a lock imbalance typo in nfs_access_cache_shrinker
  sunrpc: fix leak on error on socket xprt setup