- 10 7月, 2016 16 次提交
-
-
由 Jon Mason 提交于
The bcma portion of the driver has been split off into a bcma specific driver. This has been mirrored for the platform driver. The last references to the bcma core struct have been changed into a generic function call. These function calls are wrappers to either the original bcma code or new platform functions that access the same areas via MMIO. This necessitated adding function pointers for both platform and bcma to hide which backend is being used from the generic bgmac code. Signed-off-by: NJon Mason <jon.mason@broadcom.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Tested-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
The bgmac driver is using the bcma provides device ID and revision, as well as the SoC ID and package, to determine which features are necessary to enable, reset, etc in the driver. In anticipation of removing the bcma requirement for this driver, these must be changed to not reference that struct. In place of that, each "feature" has been given a flag, and the flags are enabled for their respective device and SoC. Signed-off-by: NJon Mason <jon.mason@broadcom.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Tested-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Move the BCMA MDIO phy into a separate file, as it is very tightly coupled with the BCMA bus. This will help with the upcoming BCMA removal from the bgmac driver. Optimally, this should be moved into phy drivers, but it is too tightly coupled with the bgmac driver to effectively move it without more changes to the driver. Note: the phy_reset was intentionally removed, as the mdio phy subsystem automatically resets the phy if a reset function pointer is present. In addition to the moving of the driver, this reset function is added. Signed-off-by: NJon Mason <jon.mason@broadcom.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Tested-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
The dma buffer allocation, etc references a dma_dev device pointer from the bcma core. In anticipation of removing the bcma requirement for this driver, these must be changed to not reference that struct. Add a dma_dev device pointer to the bgmac stuct and reference that instead. Signed-off-by: NJon Mason <jon.mason@broadcom.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Tested-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
The bgmac_* print wrappers call dev_* prints with the dev pointer from the bcma core. In anticipation of removing the bcma requirement for this driver, these must be changed to not reference that struct. So, simply change all of the bgmac_* prints to their dev_* counterparts. In some cases netdev_* prints are more appropriate, so change those as well. Signed-off-by: NJon Mason <jon.mason@broadcom.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Tested-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
An important information for the napi_poll tracepoint is knowing the work done (packets processed) by the napi_poll() call. Add both the work done and budget, as they are related. Handle trace_napi_poll() param change in dropwatch/drop_monitor and in python perf script netdev-times.py in backward compat way, as python fortunately supports optional parameter handling. Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Hayes Wang says: ==================== r8152: remove the redundant code Remove the unnacessary code. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
There is no conflict between the work_queue function and rtl8152_set_speed(), so we don't have to cancel the delayed work in rtl8152_set_speed(). Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
After commit 90186af4 ("r8152: fix lockup when runtime PM is enabled"), the autoresume wouldn't start the device before rtl8152_open() is finished. Therefore, we don't have to reset the linking status before and after autoresume. That is, one of netif_carrier_off() in rtl8152_open() could be removed. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
In rtl_hw_phy_work_func_t(), the flag of PHY_RESET is set in rtl_ops.hw_phy_cfg() and cleared in rtl8152_set_speed(). Therefore, the rtl_phy_reset() is never run and is unnecessary. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Simon Horman says: ==================== net: support MPLS in IPv4 and UDP This short series provides support for MPLS in IPv4 (RFC4023), and by virtue of FOU, MPLS in UDP (RFC7510). The changes are as follows: 1. Teach tunnel4.c about AF_MPLS, it already understands AF_INET and AF_INET6 2. Enhance IPIP and SIT to handle MPLS. Both already handle IPv4. SIT also already handles IPv6. 3. Trivially enhance MPLS to allow routes over SIT and IPIP tunnels. A corresponding patch set for iproute2 has also been provided. Changes since v1 * Correct inverted IPIP protocol logic in SIT patch * Provide usage example below Sample configuration follows: * The following creates a tunnel and routes MPLS packets whose outermost label is 100 over it. The forwarded packets will have the outermost label stack entry, 100, removed and two label stack entries added, the outermost having label 200 and the next having label 300. The local end-point for the tunnel is 10.0.99.192 and the remote endpoint is 10.0.99.193. The local address for encapsulated packets is 10.0.98.192 and the remote address is 10.0.98.193. # Create an MPLS over IPv4 tunnel using the IPIP driver ip link add name tun1 type ipip remote 10.0.99.193 local 10.0.99.192 \ ttl 225 mode mplsip # Bring the tunnel up and an add an IPv4 address and route ip link set up dev tun1 ip addr add 10.0.98.192/24 dev tun1 # Set MPLS route # Allow MPLS forwarding of packets recieved on eth0 echo 1 > /proc/sys/net/mpls/conf/eth0/input # Larger than label to be routed (100) echo 101 > /proc/sys/net/mpls/platform_labels ip -f mpls route add 100 as 200/300 via inet 10.0.98.193 * For FOU (in this case MPLS over UDP) a tunnel may created using: # Packets recieved on UDP port 6635 are MPLS over UDP (IP proto 137) ip fou add port 6635 ipproto 137 # Create the tunnel netdev ip link add name tun1 type ipip remote 10.0.99.193 local 10.0.99.192 \ ttl 225 mode mplsip encap fou encap-sport auto encap-dport 6635 IPv4 address, link and route, and MPLS routing commands are as per the MPLS over IPv4 example * To use the SIT driver instead of the IPIP driver "ipip" may be substituted for "sit" in the above examples. * To create a tunnel that forwards and receives all supported inner-protocols "mplsip" may be substituted for "any" in the above examples. For the IPIP driver this configures both IPv4 and MPLS over IPv4. For the SIT driver this configures IPv6, IPv4 and MPLS over IPv4. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Allow MPLS routes on IPIP and SIT devices now that they support forwarding MPLS packets. Signed-off-by: NSimon Horman <simon.horman@netronome.com> Reviewed-by: NDinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Extend the IPIP driver to support MPLS over IPv4. The implementation is an extension of existing support for IPv4 over IPv4 and is based of multiple inner-protocol support for the SIT driver. Signed-off-by: NSimon Horman <simon.horman@netronome.com> Reviewed-by: NDinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Extend the SIT driver to support MPLS over IPv4. This implementation extends existing support for IPv6 over IPv4 and IPv4 over IPv4. Signed-off-by: NSimon Horman <simon.horman@netronome.com> Reviewed-by: NDinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Extend tunnel support to MPLS over IPv4. The implementation extends the existing differentiation between IPIP and IPv6 over IPv4 to also cover MPLS over IPv4. Signed-off-by: NSimon Horman <simon.horman@netronome.com> Reviewed-by: NDinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
As was suggested this patch adds support for the different versions of MLD and IGMP query types. Since the user visible structure is still in net-next we can augment it instead of adding netlink attributes. The distinction between the different IGMP/MLD query types is done as suggested in Section 7.1, RFC 3376 [1] and Section 8.1, RFC 3810 [2] based on query payload size and code for IGMP. Since all IGMP packets go through multicast_rcv() and it uses ip_mc_check_igmp/ipv6_mc_check_mld we can be sure that at least the ip/ipv6 header can be directly used. [1] https://tools.ietf.org/html/rfc3376#section-7 [2] https://tools.ietf.org/html/rfc3810#section-8.1Suggested-by: NLinus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 7月, 2016 8 次提交
-
-
由 Marcelo Ricardo Leitner 提交于
When we introduced GSO support, if using auth the auth chunk was being left queued on the packet even after the final segment was generated. Later on sctp_transmit_packet it calls sctp_packet_reset, which zeroed the packet len while not accounting for this left-over. This caused more space to be used the next packet due to the chunk still being queued, but space which wasn't allocated as its size wasn't accounted. The fix is to only queue it back when we know that we are going to generate another segment. Fixes: 90017acc ("sctp: Add GSO support") Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
This code generates as static checker warning because htons(ETH_P_IPV6) is always true. From the context it looks like the && was intended to be !=. Fixes: 94758f8d ('bnxt_en: Add GRO logic for BCM5731X chips.') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexei Starovoitov 提交于
over time there were multiple requests to access different data structures and fields of task_struct current, so finally add the helper to access 'current' as-is. Tracing bpf programs will do the rest of walking the pointers via bpf_probe_read(). Note that current can be null and bpf program has to deal it with, but even dumb passing null into bpf_probe_read() is still safe. Suggested-by: NBrendan Gregg <brendan.d.gregg@gmail.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The routing table of every switch in a tree is currently initialized to all zeros. This is an issue since 0 is a valid port number. Add a DSA_RTABLE_NONE=-1 constant to initialize the signed values of the routing table pointing to other switches. This fixes the device mapping of the mv88e6xxx driver where the port pointing to the switch itself and to non-existent switches was wrongly configured to be 0. It is now set to the expected 0xf value. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Craig Gallek 提交于
The referenced change added a netlink notifier for processing device queue size events. These events are fired for all devices but the registered callback assumed they only occurred for tun devices. This fix adds a check (borrowed from macvtap.c) to discard non-tun device events. For reference, this fixes the following splat: [ 71.505935] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 71.513870] IP: [<ffffffff8153c1a0>] tun_device_event+0x110/0x340 [ 71.519906] PGD 3f41f56067 PUD 3f264b7067 PMD 0 [ 71.524497] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 71.529374] gsmi: Log Shutdown Reason 0x03 [ 71.533417] Modules linked in:[ 71.533826] mlx4_en: eth1: Link Up [ 71.539616] bonding w1_therm wire cdc_acm ehci_pci ehci_hcd mlx4_en ib_uverbs mlx4_ib ib_core mlx4_core [ 71.549282] CPU: 12 PID: 7915 Comm: set.ixion-haswe Not tainted 4.7.0-dbx-DEV #8 [ 71.556586] Hardware name: Intel Grantley,Wellsburg/Ixion_IT_15, BIOS 2.58.0 05/03/2016 [ 71.564495] task: ffff887f00bb20c0 ti: ffff887f00798000 task.ti: ffff887f00798000 [ 71.571894] RIP: 0010:[<ffffffff8153c1a0>] [<ffffffff8153c1a0>] tun_device_event+0x110/0x340 [ 71.580327] RSP: 0018:ffff887f0079bbd8 EFLAGS: 00010202 [ 71.585576] RAX: fffffffffffffae8 RBX: ffff887ef6d03378 RCX: 0000000000000000 [ 71.592624] RDX: 0000000000000000 RSI: 0000000000000028 RDI: 0000000000000000 [ 71.599675] RBP: ffff887f0079bc48 R08: 0000000000000000 R09: 0000000000000001 [ 71.606730] R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000010 [ 71.613780] R13: 0000000000000000 R14: 0000000000000001 R15: ffff887f0079bd00 [ 71.620832] FS: 00007f5cdc581700(0000) GS:ffff883f7f700000(0000) knlGS:0000000000000000 [ 71.628826] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.634500] CR2: 0000000000000010 CR3: 0000003f3eb62000 CR4: 00000000001406e0 [ 71.641549] Stack: [ 71.643533] ffff887f0079bc08 0000000000000246 000000000000001e ffff887ef6d00000 [ 71.650871] ffff887f0079bd00 0000000000000000 0000000000000000 ffffffff00000000 [ 71.658210] ffff887f0079bc48 ffffffff81d24070 00000000fffffff9 ffffffff81cec7a0 [ 71.665549] Call Trace: [ 71.667975] [<ffffffff810eeb0d>] notifier_call_chain+0x5d/0x80 [ 71.673823] [<ffffffff816365d0>] ? show_tx_maxrate+0x30/0x30 [ 71.679502] [<ffffffff810eeb3e>] __raw_notifier_call_chain+0xe/0x10 [ 71.685778] [<ffffffff810eeb56>] raw_notifier_call_chain+0x16/0x20 [ 71.691976] [<ffffffff8160eb30>] call_netdevice_notifiers_info+0x40/0x70 [ 71.698681] [<ffffffff8160ec36>] call_netdevice_notifiers+0x16/0x20 [ 71.704956] [<ffffffff81636636>] change_tx_queue_len+0x66/0x90 [ 71.710807] [<ffffffff816381ef>] netdev_store.isra.5+0xbf/0xd0 [ 71.716658] [<ffffffff81638350>] tx_queue_len_store+0x50/0x60 [ 71.722431] [<ffffffff814a6798>] dev_attr_store+0x18/0x30 [ 71.727857] [<ffffffff812ea3ff>] sysfs_kf_write+0x4f/0x70 [ 71.733274] [<ffffffff812e9507>] kernfs_fop_write+0x147/0x1d0 [ 71.739045] [<ffffffff81134a4f>] ? rcu_read_lock_sched_held+0x8f/0xa0 [ 71.745499] [<ffffffff8125a108>] __vfs_write+0x28/0x120 [ 71.750748] [<ffffffff8111b137>] ? percpu_down_read+0x57/0x90 [ 71.756516] [<ffffffff8125d7d8>] ? __sb_start_write+0xc8/0xe0 [ 71.762278] [<ffffffff8125d7d8>] ? __sb_start_write+0xc8/0xe0 [ 71.768038] [<ffffffff8125bd5e>] vfs_write+0xbe/0x1b0 [ 71.773113] [<ffffffff8125c092>] SyS_write+0x52/0xa0 [ 71.778110] [<ffffffff817528e5>] entry_SYSCALL_64_fastpath+0x18/0xa8 [ 71.784472] Code: 45 31 f6 48 8b 93 78 33 00 00 48 81 c3 78 33 00 00 48 39 d3 48 8d 82 e8 fa ff ff 74 25 48 8d b0 40 05 00 00 49 63 d6 41 83 c6 01 <49> 89 34 d4 48 8b 90 18 05 00 00 48 39 d3 48 8d 82 e8 fa ff ff [ 71.803655] RIP [<ffffffff8153c1a0>] tun_device_event+0x110/0x340 [ 71.809769] RSP <ffff887f0079bbd8> [ 71.813213] CR2: 0000000000000010 [ 71.816512] ---[ end trace 4db6449606319f73 ]--- Fixes: 1576d986 ("tun: switch to use skb array for tx") Signed-off-by: NCraig Gallek <kraig@google.com> Acked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'rxrpc-rewrite-20160706' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Improve conn/call lookup and fix call number generation [ver #3] I've fixed a couple of patch descriptions and excised the patch that duplicated the connections list for reconsideration at a later date. For reference, the excised patch is sitting on the rxrpc-experimental branch of my git tree, based on top of the rxrpc-rewrite branch. Diffing it against yesterday's tag shows no differences. Would you prefer the patch set to be emailed afresh instead of a git-pull request? David --- Here's the next part of the AF_RXRPC rewrite. The two main purposes of this set are to fix the call number handling and to make use of RCU when looking up the connection or call to pass a received packet to. Important changes in this set include: (1) Avoidance of placing stack data into SG lists in rxkad so that kernel stacks can become vmalloc'd (Herbert Xu). (2) Calls cease pinning the connection they used as soon as possible, which allows the connection to be discarded sooner and allows the call channel on that connection to be reused earlier. (3) Make each call channel on a connection have a separate and independent call number space rather than having a shared number space for the connection. Call numbers should increment monotonically per channel on the client, and the server should ignore a call with a lower call number for that channel than the latest it has seen. The RESPONSE packet sets the minimum values of each call ID counter on a connection. (4) Look up calls by indexing the channel array on a connection rather than by keeping calls in an rbtree on that connection. Also look up calls using the channel array rather than using a hashtable. The call hashtable can then be removed. (5) Call terminal statuses are cached in the channel array for the last call. It is assumed that if we the server have seen call N, then the client no longer cares about call N-1 on the same channel. This will allow retransmission of the terminal status in future without the need to keep the rxrpc_call struct around. (6) Peer lookups are moved out of common connection handling code and into service connection handling code as client connections (a) must point to a peer before they can be used and (b) are looked up by a machine-unique connection ID directly, so we only need to look up the peer first if we're going to deal with a service call. (7) The reference count on a connection is held elevated by 1 whilst it is alive (ie. idle unused connections have a refcount of 1). The reaper will attempt to change the refcount from 1->0 and skip if this cannot be done, whilst look ups only increment the refcount if it's non-zero. This makes the implementation of RCU lookups easier as we don't have to get a ref on the connection or a lock on the connection list to prevent a connection being reaped whilst we're contemplating queueing a packet that initiates a new service call upon it. If we need to get a connection, but there's a dead connection in the tree, we use rb_replace_node() to replace the dead one with a new one. (8) Use a seqlock to validate the walk over the service connection rbtree attached to a peer when it's being walked in RCU mode. (9) Make the incoming call/connection packet handling code use RCU mode and locks and make it only take a reference if the call/connection gets queued on a workqueue. The intention is that the next set will introduce the connection lifetime management and capacity limits to prevent clients from overloading the server. There are some fixes too: (1) Verifying that a packet coming in to a client connection came from the expected source. (2) Fix handling of connection failure in client call creation where we don't reinitialise the list linkage block and a second attempt to unlink the failed connection oopses and also we don't set the state correctly, which causes an assertion failure. (3) New service calls were being added to the socket's accept queue under the wrong lock. Changes: (V2) In rxrpc_find_service_conn_rcu() initialised the sequence number to 0. Fixed the RCU handling in conn_service.c by introducing and using rb_replace_node_rcu() as an RCU-safe alternative in rxrpc_publish_service_conn(). Modified and used rcu_dereference_raw() to avoid RCU sparse warnings in rxrpc_find_service_conn_rcu(). Added in some missing RCU dereference wrappers. It seems to be necessary to turn on CONFIG_PROVE_RCU_REPEATEDLY as well as CONFIG_SPARSE_RCU_POINTER to get the static __rcu annotation checking to happen. Fixed some other sparse warnings, including a missing ntohs() in jumbo packet processing. (V3) Fixed some commit descriptions. Excised the patch that duplicated the connection list to separate out the procfs list for reconsideration at a later date. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 K. Y. Srinivasan 提交于
Use the new APIs for eliminating a copy on the receive path. These new APIs also help in minimizing the number of memory barriers we end up issuing (in the ringbuffer code) since we can better control when we want to expose the ring state to the host. The patch is being resent to address earlier email issues. Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
hfsc_sched is huge (size: 920, cachelines: 15), but we can get it to 14 cachelines by placing level after filter_cnt (covering 4 byte hole) and reducing period/nactive/flags to u32 (period is just a counter, incremented when class becomes active -- 2**32 is plenty for this purpose, also, long is only 32bit wide on 32bit platforms anyway). cl_vtperiod is exported to userspace via tc_hfsc_stats, but its period member is already u32, so no precision is lost there either. Cc: Michal Soltys <soltys@ziu.info> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 7月, 2016 7 次提交
-
-
由 David S. Miller 提交于
Merge tag 'mac80211-next-for-davem-2016-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== One more set of new features: * beacon report (for radio measurement) support in cfg80211/mac80211 * hwsim: allow wmediumd in namespaces * mac80211: extend 160MHz workaround to CSA IEs * mesh: properly encrypt group-addressed privacy action frames * mesh: allow setting peer AID * first steps for MU-MIMO monitor mode * along with various other cleanups and improvements ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Remove .owner field since calls to module_platform_driver() will set it automatically. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en.h drivers/net/ethernet/mellanox/mlx5/core/en_main.c drivers/net/usb/r8152.c All three conflicts were overlapping changes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) All users of AF_PACKET's fanout feature want a symmetric packet header hash for load balancing purposes, so give it to them. 2) Fix vlan state synchronization in e1000e, from Jarod Wilson. 3) Use correct socket pointer in ip_skb_dst_mtu(), from Shmulik Ladkani. 4) mlx5 bug fixes from Mohamad Haj Yahia, Daniel Jurgens, Matthew Finlay, Rana Shahout, and Shaker Daibes. Mostly to do with operation timeouts and PCI error handling. 5) Fix checksum handling in mirred packet action, from WANG Cong. 6) Set skb->dev correctly when transmitting in !protect_frames case of macsec driver, from Daniel Borkmann. 7) Fix MTU calculation in geneve driver, from Haishuang Yan. 8) Missing netif_napi_del() in unregister path of qeth driver, from Ursula Braun. 9) Handle malformed route netlink messages in decnet properly, from Vergard Nossum. 10) Memory leak of percpu data in ipv6 routing code, from Martin KaFai Lau. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) ipv6: Fix mem leak in rt6i_pcpu net: fix decnet rtnexthop parsing cxgb4: update latest firmware version supported net/mlx5: Avoid setting unused var when modifying vport node GUID bonding: fix enslavement slave link notifications r8152: fix runtime function for RTL8152 qeth: delete napi struct when removing a qeth device Revert "fsl/fman: fix error handling" fsl/fman: fix error handling cdc_ncm: workaround for EM7455 "silent" data interface RDS: fix rds_tcp_init() error path geneve: fix max_mtu setting net: phy: dp83867: Fix initialization of PHYCR register enc28j60: Fix race condition in enc28j60 driver net: stmmac: Fix null-function call in ISR on stmmac1000 tipc: fix nl compat regression for link statistics net: bcmsysport: Device stats are unsigned long macsec: set actual real device for xmit when !protect_frames net_sched: fix mirrored packets checksum packet: Use symmetric hash for PACKET_FANOUT_HASH. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next, they are: 1) Don't use userspace datatypes in bridge netfilter code, from Tobin Harding. 2) Iterate only once over the expectation table when removing the helper module, instead of once per-netns, from Florian Westphal. 3) Extra sanitization in xt_hook_ops_alloc() to return error in case we ever pass zero hooks, xt_hook_ops_alloc(): 4) Handle NFPROTO_INET from the logging core infrastructure, from Liping Zhang. 5) Autoload loggers when TRACE target is used from rules, this doesn't change the behaviour in case the user already selected nfnetlink_log as preferred way to print tracing logs, also from Liping Zhang. 6) Conntrack slabs with SLAB_HWCACHE_ALIGN to allow rearranging fields by cache lines, increases the size of entries in 11% per entry. From Florian Westphal. 7) Skip zone comparison if CONFIG_NF_CONNTRACK_ZONES=n, from Florian. 8) Remove useless defensive check in nf_logger_find_get() from Shivani Bhardwaj. 9) Remove zone extension as place it in the conntrack object, this is always include in the hashing and we expect more intensive use of zones since containers are in place. Also from Florian Westphal. 10) Owner match now works from any namespace, from Eric Bierdeman. 11) Make sure we only reply with TCP reset to TCP traffic from nf_reject_ipv4, patch from Liping Zhang. 12) Introduce --nflog-size to indicate amount of network packet bytes that are copied to userspace via log message, from Vishwanath Pai. This obsoletes --nflog-range that has never worked, it was designed to achieve this but it has never worked. 13) Introduce generic macros for nf_tables object generation masks. 14) Use generation mask in table, chain and set objects in nf_tables. This allows fixes interferences with ongoing preparation phase of the commit protocol and object listings going on at the same time. This update is introduced in three patches, one per object. 15) Check if the object is active in the next generation for element deactivation in the rbtree implementation, given that deactivation happens from the commit phase path we have to observe the future status of the object. 16) Support for deletion of just added elements in the hash set type. 17) Allow to resize hashtable from /proc entry, not only from the obscure /sys entry that maps to the module parameter, from Florian Westphal. 18) Get rid of NFT_BASECHAIN_DISABLED, this code is not exercised anymore since we tear down the ruleset whenever the netdevice goes away. 19) Support for matching inverted set lookups, from Arturo Borrero. 20) Simplify the iptables_mangle_hook() by removing a superfluous extra branch. 21) Introduce ether_addr_equal_masked() and use it from the netfilter codebase, from Joe Perches. 22) Remove references to "Use netfilter MARK value as routing key" from the Netfilter Kconfig description given that this toggle doesn't exists already for 10 years, from Moritz Sichert. 23) Introduce generic NF_INVF() and use it from the xtables codebase, from Joe Perches. 24) Setting logger to NONE via /proc was not working unless explicit nul-termination was included in the string. This fixes seems to leave the former behaviour there, so we don't break backward. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Here are a collection of small fixes: at this time, we've got a slightly high amount, but all small and trivial fixes, and nothing scary can be seen there" * tag 'sound-4.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ALSA: hda/realtek: Add Lenovo L460 to docking unit fixup ALSA: timer: Fix negative queue usage by racy accesses ASoC: rt5645: fix reg-2f default value. ASoC: fsl_ssi: Fix number of words per frame for I2S-slave mode ALSA: au88x0: Fix calculation in vortex_wtdma_bufshift() ALSA: hda - Add PCI ID for Kabylake-H ALSA: echoaudio: Fix memory allocation ASoC: Intel: atom: fix missing breaks that would cause the wrong operation to execute ALSA: hda - fix read before array start ASoC: cx20442: set tty->receiver_room in v253_open ASoC: ak4613: Enable cache usage to fix crashes on resume ASoC: wm8940: Enable cache usage to fix crashes on resume ASoC: Intel: Skylake: Initialize module list for Broxton ASoC: wm5102: Correct supported channels on trace compressed DAI ASoC: wm5110: Add missing route from OUT3R to SYSCLK ASoC: rt5670: fix HP Playback Volume control ASoC: hdmi-codec: select CONFIG_HDMI ASoC: davinci-mcasp: Fix dra7 DMA offset when using CFG port ASoC: hdac_hdmi: Fix potential NULL dereference ASoC: ak4613: Remove owner assignment from platform_driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform由 Linus Torvalds 提交于
Pull chrome platform fix from Olof Johansson: "A single fix this time, closing a window where ioctl args are fetched twice" * tag 'chrome-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: platform/chrome: cros_ec_dev - double fetch bug in ioctl
-
- 06 7月, 2016 9 次提交
-
-
由 Masashi Honma 提交于
Previously, mesh power management functionality works only with kernel MPM. Because user space MPM did not report mesh peer AID to kernel, the kernel could not identify the bit in TIM element. So this patch adds mesh peer AID setting API. Signed-off-by: NMasashi Honma <masashi.honma@gmail.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Continuing the workaround implemented in commit 23665aaf ("mac80211: Interoperability workaround for 80+80 and 160 MHz channels") use the same code to parse the Wide Bandwidth Channel Switch element by converting to VHT Operation element since the spec also just refers to that for parsing semantics, particularly with the workaround. While at it, remove some dead code - the IEEE80211_STA_DISABLE_40MHZ flag can never be set at this point since it's checked earlier and the wide_bw_chansw_ie pointer is set to NULL if it's set. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Rather than reporting the scan as having completed, report it as being aborted. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Avraham Stern 提交于
Add the following to support beacon report radio measurement with the measurement mode field set to passive or active: 1. Propagate the required scan duration to the device 2. Report the scan start time (in terms of TSF) 3. Report each BSS's detection time (also in terms of TSF) TSF times refer to the BSS that the interface that requested the scan is connected to. Signed-off-by: NAssaf Krauss <assaf.krauss@intel.com> Signed-off-by: NAvraham Stern <avraham.stern@intel.com> [changed ath9k/10k, at76c59x-usb, iwlegacy, wl1251 and wlcore to match the new API] Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Avraham Stern 提交于
Beacon report radio measurement requires reporting observed BSSs on the channels specified in the beacon request. If the measurement mode is set to passive or active, it requires actually performing a scan (passive or active, accordingly), and reporting the time that the scan was started and the time each beacon/probe was received (both in terms of TSF of the BSS of the requesting AP). If the request mode is table, this information is optional. In addition, the radio measurement request specifies the channel dwell time for the measurement. In order to use scan for beacon report when the mode is active or passive, add a parameter to scan request that specifies the channel dwell time, and add scan start time and beacon received time to scan results information. Supporting beacon report is required for Multi Band Operation (MBO). Signed-off-by: NAssaf Krauss <assaf.krauss@intel.com> Signed-off-by: NDavid Spinadel <david.spinadel@intel.com> Signed-off-by: NAvraham Stern <avraham.stern@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The API expects a pointer to a signed int so we should not use an unsigned int for it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Ilan Peer 提交于
Add radar_detect_widths to the interface combination that allows concurrent P2P Device dedicated interface and AP interfaces, to enable testing of radar detection when P2P Device interface is used. Clear the radar_detect_widths in case of multi channel contexts as this is not currently supported. As radar_detect_widths are now supported in all combinations, remove the hwsim_if_dfs_limits definition since it is no longer needed. Signed-off-by: NIlan Peer <ilan.peer@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Aviya Erenfeld 提交于
add API to support VHT MU-MIMO air sniffer. in MU-MIMO there are parallel frames on the air while the HW has only one RX. add the capability to sniff one of the MU-MIMO parallel frames by giving the sniffer additional information so it'll know which of the parallel frames it shall follow. Add attribute - NL80211_ATTR_MU_MIMO_GROUP_DATA - for getting a MU-MIMO groupID in order to monitor packets from that group using VHT MU-MIMO. And add attribute -NL80211_ATTR_MU_MIMO_FOLLOW_ADDR - for passing MAC address to monitor mode. that option will be used by VHT MU-MIMO air sniffer to follow a station according to it's MAC address using VHT MU-MIMO. Signed-off-by: NAviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The current implementation of handling ADDBA Request while a session is already active with the peer is wrong - in case the peer is using the existing session's dialog token this should be treated as update to the session, which can update the timeout value. We don't really have a good way of supporting that, so reject, but implement the required behaviour in the spec of "Even if the updated ADDBA Request frame is not accepted, the original Block ACK setup remains active." (802.11-2012 10.5.4) Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-