Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This utilizes the hostdata area that is hung off of scsi_target and
scsi_device for saving unique firmware mapping. This will be required
for supporting new Fibre and SPI transport support.

This also fixs problems in error handling error code for SAS
controllers, in which the incorrect mapping was passed to the
firmware.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This moves some functions around from within the #define
MPTSCSIH_ENABLE_DOMAIN_VALIDATION area, in preperation for generic
domain validation.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This changes to SPI for the bus_type enumeration.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This cleans the returning failure conditions of the
mptsas/mptfc/mptspi probe routines.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

- Add functionality to run in polled mode only. Includes run time
  attribute to enable mode.
- Enable runtime writable hba settings for coallescing and delay parameters

Customers have requested a mode in the driver to run strictly polled.
This is generally to support an environment where the server is extremely
loaded and is looking to reclaim some cpu cycles from adapter interrupt
handling.

This patch adds a new "poll" attribute, and the following behavior:

if value is 0 (default):
  The driver uses the normal method for i/o completion. It uses the
  firmware feature of interrupt coalesing. The firmware allows a
  minimum number of i/o completions before an interrupt, or a maximum
  time delay between interrupts.  By default, the driver sets these
  to no delay (disabled) or 1 i/o - meaning coalescing is disabled.

  Attributes were provided to change the coalescing values, but it was
  a module-load time only and global across all adapters.
  This patch allows them to be writable on a per-adapter basis.

if value is 1 :
  Interrupts are left enabled, expecting that the user has tuned the
  interrupt coalescing values. When this setting is enabled, the driver
  will attempt to service completed i/o whenever new i/o is submitted
  to the adapter. If the coalescing values are large, and the i/o
  generation rate steady, an interrupt will be avoided by servicing
  completed i/o prior to the coalescing thresholds kicking in. However,
  if the i/o completion load is high enough or i/o generation slow, the
  coalescion values will ensure that completed i/o is serviced in a timely
  fashion.

if value is 3 :
  Turns off FCP i/o interrupts altogether. The coalescing values now have
  no effect. A new attribute "poll_tmo" (default 10ms) exists to set
  the polling interval for i/o completion. When this setting is enabled,
  the driver will attempt to service completed i/o and restart the
  interval timer whenever new i/o is submitted. This behavior allows for
  servicing of completed i/o sooner than the interval timer, but ensures
  that if no i/o is being issued, then the interval timer will kick in
  to service the outstanding i/o.
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

- Release task management command before counting outstanding commands.
  TMF was being erroneously counted as an active outstanding command.
- Serialize EH calls and block requests when EH function is running.
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Remove locking wrappers around error handlers. Wrappers were added in
early 2.6.13 api change
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

- Remove unnecessary scsi_block_requests calls on rport deletes.
  This was deadlocking the sdev removals as they wanted to flush commands.
- No longer block requests when adding the remote port (to block
  discovery). Instead, register, then change port role. Maps to Qlogic
  behavior, and closer to the register-node-upon-first-ELS behavior.
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Cause: Link bounces were causing discovery ELS's to be killed.
Driver was not properly flushing ELS commands upon the subsequent
link bounces. Thus, processing of ELS post link bounce erroneously
assumed discovery failure and device loss.
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Miscellaneous Cleanups:
- Remove ProgType READ_REV mailbox command value check in lpfc_config_port_prep.
- Convert simple printk to an lpfc_printf_log in queuecommand.
- Modify lpfc_abort_handler message 0749 to display more accurate text and data.
- Minor style cleanup: fix 3 long lines in lpfc_hw.h
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Make the vendor, model and rev fields in scsi_device pointers to const
and update a few prototypes of functions using them.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

From Wang Zhenyu:

check header digest for cmd and mgmt tasks
Signed-off-by: NWang Zhenyu <zhenyu.z.wang@intel.com>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NAlex Aizman <itn780@yahoo.com>
Signed-off-by: NDmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NAlex Aizman <itn780@yahoo.com>
Signed-off-by: NDmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

From Wang Zhenyu:

High queue depth was a problem for some targets so make queue_depth adjustable

From Mike Christie

Make default queue_depth a little lower
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NAlex Aizman <itn780@yahoo.com>
Signed-off-by: NDmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

From Wang Zhenyu:

data digest fix (the bug caused data corruption w/Wasabi StorageBuilder target)
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NAlex Aizman <itn780@yahoo.com>
Signed-off-by: NDmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

from Wang Zhenyu:

Must check SCSI CMD and R2T response according to the spec
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NAlex Aizman <itn780@yahoo.com>
Signed-off-by: NDmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

From tomof@acm.org:

There is one more issue about Equallogic systems. They send
re-direction info with FIN. I think that the kernel module needs to
let iscsid to read data from the socket before killing it.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NAlex Aizman <itn780@yahoo.com>
Signed-off-by: NDmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Must check only valid opcode bits.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NAlex Aizman <itn780@yahoo.com>
Signed-off-by: NDmitry Yusupov <dmitry_yus@yahoo.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Update version number to 2.2.2
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Rather than print a list of targets at driver init time, print each
disabled target as we attempt to scan it.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The NVRAM for both Tekram and Symbios boards allows the user to set the
speed and width for individual targets.  I took that code out in March
2004 when we introduced Domain Validation, but it seems there's still
a legitimate need for it in some configurations.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

sym_show_msg was almost a duplicate of scsi_print_msg, except not as
featureful.  So use the common code instead.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Now that this constant has been added to dma-mapping.h, we don't need our
own definition
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The upper layer doesn't send these down since 2.4.x (or 2.6 in
practice), so no need to handle it.  Inline sym_setup_data_pointers
into its only caller so we can fail gracefully in the case we'd get
one neverless.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Allocate the lcb in slave_alloc and free it in slave_destroy.  This allows
us to remove all the code that checks to see if it's already been allocated.

From: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The SYM_OPT_SNIFF_INQUIRY define is never set any more, and the
sym_sniff_inquiry() function doesn't exist

From: Christoph Hellwig <hch@lst.de>
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Remove FreeBSD ifdefs from sym2 driver
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Update to mention scsi_scan_host()
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Transition driver to exclusively use the request_firmware()
interfaces to retrieve firmware-blobs from user-space.  This
will be the default behaviour going forward until the
embedded firmware-binary images are removed from the
upstream kernel.

Upon request, the driver caches the firmware image until the
driver is unloaded.

NOTE: The option is present to allow the user to continue to
use the firmware-loader modules, but, should be considered
deprecated.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>

Rejections fixed up and
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>