- 31 1月, 2015 3 次提交
-
-
由 Tony Lindgren 提交于
Looks like on 3517 davinci_emac MAC address registers have a different layout compared to dm816x and am33xx. Let's add a function to get the 3517 MAC address. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Lindgren 提交于
At least on dm81xx, we can get the davinci_emac MAC address the same way as on am33xx cpsw. Let's also use ether_addr_copy() for davinci_emac while at it. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Lindgren 提交于
Looks like davinci_emac and cpsw can share some code although the device registers have a different layout. At least the code for getting the MAC address using syscon can be shared by passing the register offset. Let's start with that and set up a minimal shared cpsw-shared.c. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 1月, 2015 4 次提交
-
-
由 David S. Miller 提交于
Merge tag 'linux-can-next-for-3.20-20150128' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2015-28-01 this is a pull request of 12 patches for net-next/master. There are 3 patches by Ahmed S. Darwish, which update the kvaser_usb driver and add support for the USBcan-II based adapters. Stéphane Grosjean contributes 7 patches for the peak_usb driver, which add support for the CANFD USB adapters. I contribute 2 patches which clean up the peak_usb driver structure a bit. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kevin Hao 提交于
Since commit cd1e6504 ("of/device: Don't register disabled devices"), the disabled device will not be registered at all. So we don't need to do the check again in the platform device driver. Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Salam Noureddine 提交于
When many pf_packet listeners are created on a lot of interfaces the current implementation using global packet type lists scales poorly. This patch adds per net_device packet type lists to fix this problem. The patch was originally written by Eric Biederman for linux-2.6.29. Tested on linux-3.16. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NSalam Noureddine <noureddine@arista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
When IFLA_LINK_NETNSID is used, the netdevice should be built in this link netns and moved at the end to another netns (pointed by the socket netns or IFLA_NET_NS_[PID|FD]). Existing user of the newlink handler will use the netns argument (src_net) to find a link netdevice or to check some other information into the link netns. For example, to find a netdevice, two information are required: an ifindex (usually from IFLA_LINK) and a netns (this link netns). Note: when using IFLA_LINK_NETNSID and IFLA_NET_NS_[PID|FD], a user may create a netdevice that stands in netnsX and with its link part in netnsY, by sending a rtnl message from netnsZ. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2015 6 次提交
-
-
由 Eric Dumazet 提交于
TIME_WAIT sockets are not owning any skb. ip_send_unicast_reply() and tcp_v6_send_response() both use regular sockets. We can safely remove a test in sch_fq and save one cache line miss, as sk_state is far away from sk_pacing_rate. Tested at Google for about one year. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
NET_ACT_CONNMARK fails to build if NF_CONNTRACK_MARK is disabled, and d7924450 ("act_connmark: Add missing dependency on NF_CONNTRACK_MARK") fixed that case, but missed the cased where NF_CONNTRACK is a loadable module. This adds the second dependency to ensure that NET_ACT_CONNMARK can only be built-in if NF_CONNTRACK is also part of the kernel rather than a loadable module. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Hellwig 提交于
The sock_iocb structure is allocate on stack for each read/write-like operation on sockets, and contains various fields of which only the embedded msghdr and sometimes a pointer to the scm_cookie is ever used. Get rid of the sock_iocb and put a msghdr directly on the stack and pass the scm_cookie explicitly to netlink_mmap_sendmsg. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
The if block was supposed to have curly braces. In the current code we complain about dropped rx packets when we shouldn't. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Gross 提交于
Currently, it isn't possible to request checksums on the outer UDP header of tunnels - the TUNNEL_CSUM flag is ignored. This adds support for requesting that UDP checksums be computed on transmit and properly reported if they are present on receive. Signed-off-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next由 David S. Miller 提交于
NFC: 3.20 first pull request This is the first NFC pull request for 3.20. With this one we have: - Secure element support for the ST Micro st21nfca driver. This depends on a few HCI internal changes in order for example to support more than one secure element per controller. - ACPI support for NXP's pn544 HCI driver. This controller is found on many x86 SoCs and is typically enumerated on the ACPI bus there. - A few st21nfca and st21nfcb fixes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2015 27 次提交
-
-
由 Stephane Grosjean 提交于
Add support for the following new PEAK-System technik CANFD USB adapters: PCAN-USB FD single CANFD channel USB adapter PCAN-USB Pro FD dual CANFD channels USB adapter Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Acked-by: NAndri Yngvason <andri.yngvason@marel.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Stephane Grosjean 提交于
Add a common function that pushes the skb in the network queue with adding timestamps information, converted from time values read from the PEAK USB adapters. Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Stephane Grosjean 提交于
Add support for the following new PEAK-System technik CANFD USB adapters: PCAN-USB FD single CANFD channel USB adapter PCAN-USB Pro FD dual CANFD channels USB adapter The communication protocol has been developed using some mechanisms that did exist in the PCAN-USB Pro, thus, this patch also changes some previously static functions and data into global ones. Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Stephane Grosjean 提交于
Upgrade PEAK-System USB adapters core to the new data structures (names) and callbacks added for the support of the CANFD extension. This specific patch includes changes that deal with the new struct canfd_frame. Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Stephane Grosjean 提交于
Upgrade PEAK-System USB adapters core to the new data structures (names) and callbacks added for the support of the CANFD extension. This specific patch does the mandatory changes to support new data bittiming specs. Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Stephane Grosjean 提交于
Add the definition of a new callback that enable any PEAK-System CAN USB adapter to grant read access to its Bus Error Counters value. This ability is not supported by all the PEAK-System adapters, thus, for those, the callback pointer will be initiaized to NULL, which is correct regarding the linux-can device driver specs. Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Stephane Grosjean 提交于
Export the ctrlmode_supported value from the core file to each adapter specific file. This has been mandatory for supporting the new CANFD extension. Signed-off-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Marc Kleine-Budde 提交于
A "struct peak_usb_adapter" describes a certain USB adapter, as this doesn't change during runtime, this patch marks all USB adapter definitions as const. Acked-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Marc Kleine-Budde 提交于
This patch converts the list "static struct peak_usb_adapter *peak_usb_adapters_list[]" to be used with ARRAY_SIZE not with a NULL termination, as the size is known during compile time. Acked-by: NStephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ahmed S. Darwish 提交于
CAN to USB interfaces sold by the Swedish manufacturer Kvaser are divided into two major families: 'Leaf', and 'USBcanII'. From an Operating System perspective, the firmware of both families behave in a not too drastically different fashion. This patch adds support for the USBcanII family of devices to the current Kvaser Leaf-only driver. CAN frames sending, receiving, and error handling paths has been tested using the dual-channel "Kvaser USBcan II HS/LS" dongle. It should also work nicely with other products in the same category. List of new devices supported by this driver update: - Kvaser USBcan II HS/HS - Kvaser USBcan II HS/LS - Kvaser USBcan Rugged ("USBcan Rev B") - Kvaser Memorator HS/HS - Kvaser Memorator HS/LS - Scania VCI2 (if you have the Kvaser logo on top) Signed-off-by: NAhmed S. Darwish <ahmed.darwish@valeo.com> Acked-by: NAndri Yngvason <andri.yngvason@marel.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ahmed S. Darwish 提交于
Replace most of the can interface's state and error counters handling with the new can-dev can_change_state() mechanism. Suggested-by: NAndri Yngvason <andri.yngvason@marel.com> Signed-off-by: NAhmed S. Darwish <ahmed.darwish@valeo.com> Acked-by: NAndri Yngvason <andri.yngvason@marel.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ahmed S. Darwish 提交于
Update all of the can interface's state and error counters before trying any skb allocation that can actually fail with -ENOMEM. Suggested-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NAhmed S. Darwish <ahmed.darwish@valeo.com> Acked-by: NAndri Yngvason <andri.yngvason@marel.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 David S. Miller 提交于
Andy Shevchenko says: ==================== stmmac: Enable Intel Quark SoC X1000 Ethernet support This is third version of the patch series [1] to bring network card support to Intel Quark SoC. The series has been tested on Intel Galileo board. Changelog v3: - rebase on top of recent net-next - rework an approach to get the custom configuration - rework an approach how to get unique bus_id - improve DMI lookup function [1] http://www.spinics.net/lists/netdev/msg296010.html ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kweh, Hock Leong 提交于
In Intel Quark SoC X1000, both of the Ethernet controllers support MSI interrupt handling. This patch enables them to use MSI interrupt servicing in stmmac_pci for Intel Quark X1000. Signed-off-by: NKweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Shevchenko 提交于
This patch introduces run-time board detection through DMI and MAC-PHY configuration function used by quark_default_data() during initialization. It fills up the phy_addr for Galileo and Galileo Gen2 boards to indicate that the Ethernet MAC controller is or is not connected to any PHY. The implementation takes into consideration for future expansion in Quark series boards that may have different PHY address that is linked to its MAC controllers. This piece of work is derived from Bryan O'Donoghue's initial work for Quark X1000 enabling. Signed-off-by: NKweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kweh, Hock Leong 提交于
The Intel Quark SoC X1000 provides two 10/100 Mbps Ethernet MAC controllers which may or may not be connected to PHY on board. This MAC controller only supports RMII PHY. This patch add Quark PCI ID as well as Quark default platform data info to this driver. Signed-off-by: NKweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karicheri, Muralidharan 提交于
Currently CPTS is built into the netcp driver even though there is no call out to the CPTS driver. This patch removes the dependency in Kconfig and remove cpts.o from the Makefile for NetCP. Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Move firmware version MACRO to a new t4fw_version.h file so that csiostor driver can also use it. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Praveen Madhavan 提交于
This patch fix is to use default firmware configuration files present in the adapter incase if not available in standard /lib/firmware/* dir. Additional cleanup is done to reuse flash related defines from cxgb4 header file. Please apply over net-next since it depends on previous commit. Signed-off-by: NPraveen Madhavan <praveenm@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Amir Vadai says: ==================== Mellanox ethernet driver updates Jan-27-2015 This patchset introduces some bug fixes, code cleanups and support in a new firmware event called recoverable error events. Patches were applied and tested against commit b8665c6c ("net: dsa/mv88e6352: make mv88e6352_wait generic") Changes from V0: - Patch 6/11 ("net/mlx4_core: Fix struct mlx4_vhcr_cmd to make implicit padding explicit"): - Removed __packed - Rephrased commit message - Added a new patch by Majd ("net/mlx4_core: Update the HCA core clock frequency after INIT_PORT") ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Majd Dibbiny 提交于
The firmware might change the hca core clock frequency after the driver issues the INIT_PORT command. Therefore we need to query the new value again and save in to the cached dev caps. Fixes: ddd8a6c1 ('net/mlx4_core: Read HCA frequency and map internal clock') Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
We are dumping device capabilities which are supported both by the firmware and the driver. Align the array that holds the capability strings with this practice. Reported-by: NYuval Shaia <yuval.shaia@oracle.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matan Barak 提交于
Fix a memory corruption at mlx4_MAD_IFC_wrapper. A table of size dev->caps.pkey_table_len[port]*sizeof(*table) was allocated, but get_full_pkey_table() assumes that the number of entries in the table is a multiplication of 32 (which isn't always correct). Fixes: 0a9a0188 ('mlx4: MAD_IFC paravirtualization') Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Use cmd->autoneg as a user hint to decide what to set in ethtool set settings callback. When cmd->autoneg == AUTONEG_ENABLE set according to ethtool->advertise otherwise, set according to ethtool->speed. Usage: - ethtool -s eth<x> speed 56000 autoneg off - ethtool -s eth<x> advertise 0x800000 autoneg on While we're here: - Move proto_admin masking outcome check to be adjacent to the operation. - Move en_warn("port reset..") print to "port reset" block. Fixes: 312df74c ("net/mlx4_en: mlx4_en_set_settings() always fails when autoneg is set") Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
mlx4_bf_alloc had an unnecessary/duplicate code line. Did no harm, but not good practice. Reported by the Mellanox Beijing team. Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
Struct mlx4_vhcr was implicitly padded by the gcc compiler on 64-bit architectures. This commit makes that padding explicit, to prevent issues with changing compilers and with incompatibilities between 32-bit architecture implicit padding and 64-bit architecture implicit padding. This structure is used in virtualization for communication between the Host and its Guests. The explicit padding allows 64-bit Hosts (old and new) to continue to interoperate with 64-bit Guests (old and new). However, without this fix, 64-bit Hosts could not interoperate with 32-bit Guests (since these did not insert the padding dword). With this fix, 32-bit Guests will be able to interoperate with 64-bit Hosts (since the structure offsets will be identical on both). Reported-by: NAlexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jack Morgenstein 提交于
The driver incorrectly assigned an out-mailbox to this command, and used an opcode modifier = 0, which is a reserved value (it should use opcode modifier = 1). Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-