- 10 5月, 2007 40 次提交
-
-
由 Andrew Morton 提交于
Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Gautham Shenoy <ego@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
A basic problem with flush_scheduled_work() is that it blocks behind _all_ presently-queued works, rather than just the work whcih the caller wants to flush. If the caller holds some lock, and if one of the queued work happens to want that lock as well then accidental deadlocks can occur. One example of this is the phy layer: it wants to flush work while holding rtnl_lock(). But if a linkwatch event happens to be queued, the phy code will deadlock because the linkwatch callback function takes rtnl_lock. So we implement a new function which will flush a *single* work - just the one which the caller wants to free up. Thus we avoid the accidental deadlocks which can arise from unrelated subsystems' callbacks taking shared locks. flush_work() non-blockingly dequeues the work_struct which we want to kill, then it waits for its handler to complete on all CPUs. Add ->current_work to the "struct cpu_workqueue_struct", it points to currently running "struct work_struct". When flush_work(work) detects ->current_work == work, it inserts a barrier at the _head_ of ->worklist (and thus right _after_ that work) and waits for completition. This means that the next work fired on that CPU will be this barrier, or another barrier queued by concurrent flush_work(), so the caller of flush_work() will be woken before any "regular" work has a chance to run. When wait_on_work() unlocks workqueue_mutex (or whatever we choose to protect against CPU hotplug), CPU may go away. But in that case take_over_work() will move a barrier we queued to another CPU, it will be fired sometime, and wait_on_work() will be woken. Actually, we are doing cleanup_workqueue_thread()->kthread_stop() before take_over_work(), so cwq->thread should complete its ->worklist (and thus the barrier), because currently we don't check kthread_should_stop() in run_workqueue(). But even if we did, everything should be ok. [akpm@osdl.org: cleanup] [akpm@osdl.org: add flush_work_keventd() wrapper] Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
Remove ->remove_sequence, ->insert_sequence, and ->work_done from struct cpu_workqueue_struct. To implement flush_workqueue() we can queue a barrier work on each CPU and wait for its completition. The barrier is queued under workqueue_mutex to ensure that per cpu wq->cpu_wq is alive, we drop this mutex before going to sleep. If CPU goes down while we are waiting for completition, take_over_work() will move the barrier on another CPU, and the handler will wake up us eventually. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
We take workqueue_mutex in there to keep CPU hotplug away. But preempt_disable() will suffice for that. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Haavard Skinnemoen 提交于
Now that the cpu_is_xxx() macros are available both on AVR32 and AT91, we can remove a couple of #ifdefs from this driver. One of them is actually wrong -- new_1 should be set on AVR32 but isn't. This causes the bus clock to run at twice the speed it is configured to. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Acked-by: NAndrew Victor <andrew@sanpeople.com> Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Haavard Skinnemoen 提交于
Several drivers shared between AT91 and AVR32 chips use cpu_is_xxx() to handle CPU-specific differences. Currently, such code needs to be inside #ifdef CONFIG_ARCH_AT91 because the macros don't exist on AVR32. By defining the same macros on both AT91 and AVR32, these #ifdefs can be eliminated. Since the macros will evaluate to a constant value for CPUs that aren't supported by the current architecture, any code that is only needed on AT91 will be optimized away on AVR32 and vice versa. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Acked-by: NAndrew Victor <andrew@sanpeople.com> Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Implement support for writing to regular AFS files, including: (1) write (2) truncate (3) fsync, fdatasync (4) chmod, chown, chgrp, utime. AFS writeback attempts to batch writes into as chunks as large as it can manage up to the point that it writes back 65535 pages in one chunk or it meets a locked page. Furthermore, if a page has been written to using a particular key, then should another write to that page use some other key, the first write will be flushed before the second is allowed to take place. If the first write fails due to a security error, then the page will be scrapped and reread before the second write takes place. If a page is dirty and the callback on it is broken by the server, then the dirty data is not discarded (same behaviour as NFS). Shared-writable mappings are not supported by this patch. [akpm@linux-foundation.org: fix a bunch of warnings] Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Make some miscellaneous changes to the AFS filesystem: (1) Assert RCU barriers on module exit to make sure RCU has finished with callbacks in this module. (2) Correctly handle the AFS server returning a zero-length read. (3) Split out data zapping calls into one function (afs_zap_data). (4) Rename some afs_file_*() functions to afs_*() where they apply to non-regular files too. (5) Be consistent about the presentation of volume ID:vnode ID in debugging output. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Export a couple of core functions for AFS write support to use: find_get_pages_contig() find_get_pages_tag() Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Miller 提交于
u64 and s64 are not necessarily 'long long' on some 64-bit platforms, so explicit the type to kill the compiler warnings. Also consistently use '%Lu' which is unsigned. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Borislav Petkov 提交于
Get the kernel version string only once from the environment, thus slightly speeding up kernel-doc. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
It seems that we need to clarify that a patch series is a series of related patches rather than "here are some of my patches as multiple (numbered) emails." Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Josef 'Jeff' Sipek 提交于
Since path_walk sets the total_link_count to 0 and calls link_path_walk, we can just call path_walk directly. Signed-off-by: NJosef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Acked-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Josef 'Jeff' Sipek 提交于
Signed-off-by: NJosef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Acked-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Daniel Walker 提交于
There's more that need fixing, and fix my own subject spelling error too. Signed-off-by: NDaniel Walker <dwalker@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
It's not sane to use mutex_lock_interruptible() and to then ignore the result. Ditto down_interruptible(), but I'm lazy. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Fulghum 提交于
Fix tty_set_ldisc in tty_io.c so that tty->receive_room is only cleared if actually changing line disciplines. Without this fix a problem occurs when requesting the line discipline to change to the same line discipline. In this case tty->receive_room is cleared but ldisc->open() is not called to set tty->receive_room back to a sane value. The result is that tty->receive_room is stuck at 0 preventing the tty flip buffer from passing receive data to the line discipline. For example: a switch from N_TTY to N_TTY followed by a select() call for read input results in data never being received because tty->receive_room is stuck at zero. A switch from N_TTY to N_TTY followed by a read() call works because the read() call itself sets tty->receive_room correctly (but select does not). Previously (< 2.6.18) this was not a problem because the tty flip buffer pushed data to the line discipline without regard for tty->receive room. Signed-off-by: NPaul Fulghum <paulkf@microgate.com> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland McGrath 提交于
This patch moves the sig_kernel_* and related macros from kernel/signal.c to linux/signal.h, and cleans them up slightly. I need the sig_kernel_* macros for default signal behavior in the utrace code, and want to avoid duplication or overhead to share the knowledge. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 WANG Cong 提交于
[akpm@linux-foundation.org: fix it] Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Olof Johansson 提交于
Driver for the on-chip hardware random number generator on PA Semi PA6T-1682M. Signed-off-by: NEgor Martovetsky <egor@pasemi.com> Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland Dreier 提交于
Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ken Chen 提交于
When cpuset is configured, it breaks the strict hugetlb page reservation as the accounting is done on a global variable. Such reservation is completely rubbish in the presence of cpuset because the reservation is not checked against page availability for the current cpuset. Application can still potentially OOM'ed by kernel with lack of free htlb page in cpuset that the task is in. Attempt to enforce strict accounting with cpuset is almost impossible (or too ugly) because cpuset is too fluid that task or memory node can be dynamically moved between cpusets. The change of semantics for shared hugetlb mapping with cpuset is undesirable. However, in order to preserve some of the semantics, we fall back to check against current free page availability as a best attempt and hopefully to minimize the impact of changing semantics that cpuset has on hugetlb. Signed-off-by: NKen Chen <kenchen@google.com> Cc: Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
Cleanup using simple_read_from_buffer() for /dev/cpuset/tasks and /proc/config.gz. Cc: Paul Jackson <pj@sgi.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
Cleanup using simple_read_from_buffer() in binfmt_misc, configfs, and sysfs. Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Joel Becker <joel.becker@oracle.com> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
Cleanup using bitrev8 in cm4000_cs driver. Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Akinobu Mita 提交于
This patch fixes error paths in module_init and probe functions in cm4000_cs and cm4040_cs drivers. Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 James Bottomley 提交于
The MCA bus has a few "integrated" functions, which are effectively virtual slots on the bus. The problem is that these special functions don't have dedicated pos IDs, so we have to manufacture ids for them outside the pos space ... and these ids can't be matched by the standard matching function, so add a special registration that requests a list of pos ids or a particular integrated function. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 James Bottomley 提交于
There's a bug in the MCA bus matching algorithm in that it promotes from signed short to int before comparing with the actual id and does sign extension on anything > 0x7fff (which means that pos ids > 0x7fff never get correctly matched). Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
Always ask the hardware to determine the hardware processor id in both UP and SMP kernels. Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
hard_smp_processor_id used to be just a macro that hard-coded hard_smp_processor_id to 0 in the non SMP case. When booting non SMP kernels on hardware where the boot ioapic id is not 0 this turns out to be a problem. This is happens frequently in the case of kdump and once in a great while in the case of real hardware. Use the APIC to determine the hardware processor id in both UP and SMP kernels to fix this issue. Notice that hard_smp_processor_id is only used by SMP code or by code that works with apics so we do not need to handle the case when apics are not present and hard_smp_processor_id should never be called there. Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Acked-by: NAndi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
hard_smp_processor_id used to be just a macro that hard-coded hard_smp_processor_id to 0 in the non SMP case. When booting non SMP kernels on hardware where the boot ioapic id is not 0 this turns out to be a problem. This is happens frequently in the case of kdump and once in a great while in the case of real hardware. Use the APIC to determine the hardware processor id in both UP and SMP kernels to fix this issue. Notice that hard_smp_processor_id is only used by SMP code or by code that works with apics so we do not need to handle the case when apics are not present and hard_smp_processor_id should never be called there. Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Acked-by: NAndi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
With the advent of kdump, the assumption that the boot CPU when booting an UP kernel is always the CPU with a particular hardware ID (often 0) (usually referred to as BSP on some architectures) is not valid anymore. The reason being that the dump capture kernel boots on the crashed CPU (the CPU that invoked crash_kexec), which may be or may not be that particular CPU. Move definition of hard_smp_processor_id for the UP case to architecture-specific code ("asm/smp.h") where it belongs, so that each architecture can provide its own implementation. Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Acked-by: NAndi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Gilbert 提交于
Display all possible partitions when the root filesystem is not mounted. This helps to track spell'o's and missing drivers. Updated to work with newer kernels. Example output: VFS: Cannot open root device "foobar" or unknown-block(0,0) Please append a correct "root=" boot option; here are the available partitions: 0800 8388608 sda driver: sd 0801 192748 sda1 0802 8193150 sda2 0810 4194304 sdb driver: sd Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [akpm@linux-foundation.org: cleanups, fix printk warnings] Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Cc: Dave Gilbert <linux@treblig.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
These haven't been fixed for ages. Just make comments out of them. arch/um/kernel/skas/process.c:181:2: warning: #warning Need to look up +userspace_pid by cpu arch/um/kernel/skas/process.c:187:2: warning: #warning Need to look up +userspace_pid by cpu arch/um/kernel/skas/process.c:194:2: warning: #warning need to loop over +userspace_pids in kill_off_processes_skas Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
A linuxdoc comment had fallen out of date - it refers to an argument which no longer exists. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
Mark another function as tt-mode only. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Enable (i)SCSI on UML, dunno why SCSI was deemed broken, it works like a charm. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Dike 提交于
UML now needs required-features.h to build - an empty one suffices. Signed-off-by: NJeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
[ With Johannes Berg <johannes@sipsolutions.net> ] Separate the hibernation (aka suspend to disk code) from the other suspend code. In particular: * Remove the definitions related to hibernation from include/linux/pm.h * Introduce struct hibernation_ops and a new hibernate() function to hibernate the system, defined in include/linux/suspend.h * Separate suspend code in kernel/power/main.c from hibernation-related code in kernel/power/disk.c and kernel/power/user.c (with the help of hibernation_ops) * Switch ACPI (the only user of pm_ops.pm_disk_mode) to hibernation_ops Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Remove an inexplicable / Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-