- 22 3月, 2010 1 次提交
-
-
由 Amit Shah 提交于
When the host lets us know what 'name' a port is assigned, we create the sysfs 'name' attribute. Generate a 'change' event after this so that udev wakes up and acts on the rules for virtio-ports (currently there's only one rule that creates a symlink from the 'name' to the actual char device). Signed-off-by: NAmit Shah <amit.shah@redhat.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 20 3月, 2010 12 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: remove duplicated #include sh: Export uncached helper symbols. sh: Fix up NUMA build for 29-bit. serial: sh-sci: Fix build failure for non-sh architectures. sh: Fix up uncached offset for legacy 29-bit mode. sh: Support CPU affinity masks for INTC controllers.
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb由 Linus Torvalds 提交于
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: remove duplicate cpu_to_le16() uwb: declare MODULE_FIRMWARE() in i1480 DFU driver uwb: make USB device id table constant uwb: wlp: refactor wlp_get_<attribute>() macros
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: fix compile errors in dma-mapping-common.h alpha: remove trailing spaces in messages alpha: use __ratelimit
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Remove IOMMU_VMERGE config option powerpc: Fix swiotlb to respect the boot option powerpc: Do not call prink when CONFIG_PRINTK is not defined powerpc: Use correct ccr bit for syscall error status powerpc/fsl-booke: Get coherent bit from PTE powerpc/85xx: Make sure lwarx hint isn't set on ppc32
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6由 Linus Torvalds 提交于
* 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Delete zero-length file drivers/mtd/maps/omap_nor.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty_port,usb-console: Fix usb serial console open/close regression tty: cpm_uart: use resource_size() tty_buffer: Fix distinct type warning hvc_console: Fix race between hvc_close and hvc_remove uartlite: Fix build on sparc. tty: Take a 256 byte padding into account when buffering below sub-page units Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: driver core: numa: fix BUILD_BUG_ON for node_read_distance driver-core: document ERR_PTR() return values kobject: documentation: Update to refer to kset-example.c. sysdev: the cpu probe/release attributes should be sysdev_class_attributes kobject: documentation: Fix erroneous example in kobject doc. driver-core: fix missing kernel-doc in firmware_class Driver core: Early platform kernel-doc update sysfs: fix sysfs lockdep warning in mlx4 code sysfs: fix sysfs lockdep warning in infiniband code sysfs: fix sysfs lockdep warning in ipmi code sysfs: Initialised pci bus legacy_mem field before use sysfs: use sysfs_bin_attr_init in firmware class driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (45 commits) USB: gadget/multi: cdc_do_config: remove redundant check usb: r8a66597-hcd: fix removed from an attached hub USB: xhci: Make endpoint interval debugging clearer. USB: Fix usb_fill_int_urb for SuperSpeed devices USB: cp210x: Remove double usb_control_msg from cp210x_set_config USB: Remove last bit of CONFIG_USB_BERRY_CHARGE USB: gadget: add gadget controller number for s3c-hsotg driver USB: ftdi_sio: Fix locking for change_speed() function USB: g_mass_storage: fixed module name in Kconfig USB: gadget: f_mass_storage::fsg_bind(): fix error handling USB: g_mass_storage: fix section mismatch warnings USB: gadget: fix Blackfin builds after gadget cleansing USB: goku_udc: remove potential null dereference USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is 0xff USB: serial: Fix module name typo for qcaux Kconfig entry. usb: cdc-wdm: Fix deadlock between write and resume usb: cdc-wdm: Fix order in disconnect and fix locking usb: cdc-wdm:Fix loss of data due to autosuspend usb: cdc-wdm: Fix submission of URB after suspension usb: cdc-wdm: Fix race between disconnect and debug messages ...
-
由 Jeff Garzik 提交于
The content was deleted in cc87edb1, but the file remained as a zero-length file. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (205 commits) ceph: update for write_inode API change ceph: reset osd after relevant messages timed out ceph: fix flush_dirty_caps race with caps migration ceph: include migrating caps in issued set ceph: fix osdmap decoding when pools include (removed) snaps ceph: return EBADF if waiting for caps on closed file ceph: set osd request message front length correctly ceph: reset front len on return to msgpool; BUG on mismatched front iov ceph: fix snaptrace decoding on cap migration between mds ceph: use single osd op reply msg ceph: reset bits on connection close ceph: remove bogus mds forward warning ceph: remove fragile __map_osds optimization ceph: fix connection fault STANDBY check ceph: invalidate_authorizer without con->mutex held ceph: don't clobber write return value when using O_SYNC ceph: fix client_request_forward decoding ceph: drop messages on unregistered mds sessions; cleanup ceph: fix comments, locking in destroy_inode ceph: move dereference after NULL test ... Fix trivial conflicts in Documentation/ioctl/ioctl-number.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: trivial white space [CIFS] checkpatch cleanup cifs: add cifs_revalidate_file cifs: add a CIFSSMBUnixQFileInfo function cifs: add a CIFSSMBQFileInfo function cifs: overhaul cifs_revalidate and rename to cifs_revalidate_dentry
-
- 19 3月, 2010 27 次提交
-
-
由 Peter Korsgaard 提交于
cdc_do_config() had a double ret check after fsg_add(). Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yoshihiro Shimoda 提交于
fix the problem that when a USB hub is attached to the r8a66597-hcd and a device is removed from that hub, it's likely that a kernel panic follows. Reported-by: NMarkus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sarah Sharp 提交于
The xHCI hardware can only handle polling intervals that are a power of two. When we add a new endpoint during a bandwidth allocation, and the polling interval is rounded down to a power of two, print the original polling interval in the endpoint descriptor. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Wilcox 提交于
USB 3 and Wireless USB specify a logarithmic encoding of the endpoint interval that matches the USB 2 specification. usb_fill_int_urb() didn't know that and was filling in the interval as if it was USB 1.1. Fix usb_fill_int_urb() for SuperSpeed devices, but leave the wireless case alone, because David Vrabel wants to keep the old encoding. Update the struct urb kernel doc to note that SuperSpeed URBs must have urb->interval specified in microframes. Add a missing break statement in the usb_submit_urb() interrupt URB checking, since wireless USB and SuperSpeed USB encode urb->interval differently. This allows xHCI roothubs to actually register with khubd. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michael Brunner 提交于
This patch removes a double usb_control_msg that sets the cp210x configuration registers a second time when calling cp210x_set_config. For data sizes >2 the second write gets corrupted. The patch has been created against 2.6.34-rc1, but all cp210x driver revisions are affected. Signed-off-by: NMichael Brunner <mibru@gmx.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Christoph Egger 提交于
One last bit was missed while removing the USB_BERRY_CHARGE config option in a8d4211f which gets dropped by this patch. Signed-off-by: NChristoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Maurus Cuelenaere 提交于
This prevents some drivers from complaining that no bcdDevice id was set. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alessio Igor Bogani 提交于
The change_speed() function should be serialized against multiple calls. Use the cfg_lock mutex to do this. Signed-off-by: NAlessio Igor Bogani <abogani@texware.it> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Michal Nazarewicz 提交于
The Kconfig help message for Mass Storage Gadget claimed the module will be named "g_file_storage" whereas it should be "g_mass_storage". Signed-off-by: NMichal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Korsgaard 提交于
Contrary to the comment in fsg_add, fsg_bind calls fsg_unbind on errors, which decreases refcount and frees the fsg_dev structure, causing trouble when fsg_add does the same. Fix it by simply leaving up cleanup to fsg_add(). Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Acked-by: NMichal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mike Frysinger 提交于
The recent commit (0e530b45) that moved usb_ep_autoconfig from the __devinit section to the __init section missed the mass storage device. Its fsg_bind() function uses the usb_ep_autoconfig() function from non __init context leading to: WARNING: drivers/usb/gadget/g_mass_storage.o(.text): Section mismatch in reference from the function _fsg_bind() to the function .init.text:_usb_ep_autoconfig() So move fsg_bind() into __init as well. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mike Frysinger 提交于
The recent change to clean out dead gadget drivers (90f79768) missed the call to gadget_is_musbhsfc() behind CONFIG_BLACKFIN. This causes Blackfin gadget builds to fail since the function no longer exists anywhere. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dan Carpenter 提交于
"dev" is always null here. In the end it's only used to get the pci_name() of "pdev" which is redundant information and so I removed it. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 spark 提交于
Signed-off-by: Nspark <spark@bandrich.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stefan Schmidt 提交于
The module is called qcaux and not moto_modem. Also use help instead of ---help-- to be in sync with the other Kconfig entries. Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
The new runtime PM scheme allows resume() to have no locks. This fixes the deadlock. Signed-off-by: NOliver Neukum <neukum@b1-systems.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
- as the callback can schedule work, URBs must be killed first - if the driver causes an autoresume, the caller must handle locking Signed-off-by: NOliver Neukum <neukum@b1-systems.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
The guarding flag must be set and tested under spinlock and cleared before the URBs are resubmitted in resume. Signed-off-by: NOliver Neukum <neukum@b1-systems.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
There's a window under which cdc-wdm may submit an URB to a device about to be suspended. This introduces a flag to prevent it. Signed-off-by: NOliver Neukum <neukum@b1-systems.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
dev_dbg() and dev_err() cannot be used to report failures that may have been caused by a device's removal Signed-off-by: NOliver Neukum <neukum@b1-systems.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
While an available response is read the device must not be autosuspended. This requires a flag dedicated to that purpose. Signed-off-by: NOliver Neukum <neukum@b1-systems.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Oliver Neukum 提交于
Unify mutexes to fix a race between write and disconnect and shift the test for disconnection to always report it. Signed-off-by: NOliver Neukum <neukum@b1-systems.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Felipe Balbi 提交于
... and avoid a compilation if we disable host side of musb. Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mike Frysinger 提交于
The recent commit "usb: musb: Add context save and restore support" added some stubs for the Blackfin code so things would compile, but it also added a bunch of warnings due to missing return statements. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mike Frysinger 提交于
The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY. However, it has no ULPI support - so there are no registers at all. That means accesses to ULPI_BUSCONTROL have to be abstracted away like other MUSB registers. This fixes building for Blackfin parts again. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Acked-by: NAnand Gadiyar <gadiyar@ti.com> Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tony Lindgren 提交于
CONFIG_ARCH_OMAP34XX is now CONFIG_ARCH_OMAP3. But since drivers/usb/musb/omap2430.c use CONFIG_PM for these registers and functions, do the same for the header. Otherwise we get the following for most omap3 defconfigs: drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'while' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'while' Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Grant Likely 提交于
C file uses IS_ERR and PTR_ERR, but doesn't include <linux/err.h> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-