This reverts commit 6ff646b2.

Your maintainer committed a major braino in the rmap code by adding the
attr fork, bmbt, and unwritten extent usage bits into rmap record key
comparisons.  While XFS uses the usage bits *in the rmap records* for
cross-referencing metadata in xfs_scrub and xfs_repair, it only needs
the owner and offset information to distinguish between reverse mappings
of the same physical extent into the data fork of a file at multiple
offsets.  The other bits are not important for key comparisons for index
lookups, and never have been.

Eric Sandeen reports that this causes regressions in generic/299, so
undo this patch before it does more damage.
Reported-by: NEric Sandeen <sandeen@sandeen.net>
Fixes: 6ff646b2 ("xfs: fix rmap key and record comparison functions")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>

Jens has reported a situation where partial direct IOs can be issued
and completed yet still return -EAGAIN. We don't want this to report
a short IO as we want XFS to complete user DIO entirely or not at
all.

This partial IO situation can occur on a write IO that is split
across an allocated extent and a hole, and the second mapping is
returning EAGAIN because allocation would be required.

The trivial reproducer:

$ sudo xfs_io -fdt -c "pwrite 0 4k" -c "pwrite -V 1 -b 8k -N 0 8k" /mnt/scr/foo
wrote 4096/4096 bytes at offset 0
4 KiB, 1 ops; 0.0001 sec (27.509 MiB/sec and 7042.2535 ops/sec)
pwrite: Resource temporarily unavailable
$

The pwritev2(0, 8kB, RWF_NOWAIT) call returns EAGAIN having done
the first 4kB write:

 xfs_file_direct_write: dev 259:1 ino 0x83 size 0x1000 offset 0x0 count 0x2000
 iomap_apply:          dev 259:1 ino 0x83 pos 0 length 8192 flags WRITE|DIRECT|NOWAIT (0x31) ops xfs_direct_write_iomap_ops caller iomap_dio_rw actor iomap_dio_actor
 xfs_ilock_nowait:     dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_ilock_for_iomap
 xfs_iunlock:          dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_direct_write_iomap_begin
 xfs_iomap_found:      dev 259:1 ino 0x83 size 0x1000 offset 0x0 count 8192 fork data startoff 0x0 startblock 24 blockcount 0x1
 iomap_apply_dstmap:   dev 259:1 ino 0x83 bdev 259:1 addr 102400 offset 0 length 4096 type MAPPED flags DIRTY

Here the first iomap loop has mapped the first 4kB of the file and
issued the IO, and we enter the second iomap_apply loop:

 iomap_apply: dev 259:1 ino 0x83 pos 4096 length 4096 flags WRITE|DIRECT|NOWAIT (0x31) ops xfs_direct_write_iomap_ops caller iomap_dio_rw actor iomap_dio_actor
 xfs_ilock_nowait:     dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_ilock_for_iomap
 xfs_iunlock:          dev 259:1 ino 0x83 flags ILOCK_SHARED caller xfs_direct_write_iomap_begin

And we exit with -EAGAIN out because we hit the allocate case trying
to make the second 4kB block.

Then IO completes on the first 4kB and the original IO context
completes and unlocks the inode, returning -EAGAIN to userspace:

 xfs_end_io_direct_write: dev 259:1 ino 0x83 isize 0x1000 disize 0x1000 offset 0x0 count 4096
 xfs_iunlock:          dev 259:1 ino 0x83 flags IOLOCK_SHARED caller xfs_file_dio_aio_write

There are other vectors to the same problem when we re-enter the
mapping code if we have to make multiple mappinfs under NOWAIT
conditions. e.g. failing trylocks, COW extents being found,
allocation being required, and so on.

Avoid all these potential problems by only allowing IOMAP_NOWAIT IO
to go ahead if the mapping we retrieve for the IO spans an entire
allocated extent. This avoids the possibility of subsequent mappings
to complete the IO from triggering NOWAIT semantics by any means as
NOWAIT IO will now only enter the mapping code once per NOWAIT IO.
Reported-and-tested-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

In xfs_initialize_perag(), if kmem_zalloc(), xfs_buf_hash_init(), or
radix_tree_preload() failed, the returned value 'error' is not set
accordingly.

Reported-as-fixing: 8b26c582 ("xfs: handle ENOMEM correctly during initialisation of perag structures")
Fixes: 9b247179 ("xfs: cache unlinked pointers in an rhashtable")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NYu Kuai <yukuai3@huawei.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The aim of the inode btree record iterator function is to call a
callback on every record in the btree.  To avoid having to tear down and
recreate the inode btree cursor around every callback, it caches a
certain number of records in a memory buffer.  After each batch of
callback invocations, we have to perform a btree lookup to find the
next record after where we left off.

However, if the keys of the inode btree are corrupt, the lookup might
put us in the wrong part of the inode btree, causing the walk function
to loop forever.  Therefore, we add extra cursor tracking to make sure
that we never go backwards neither when performing the lookup nor when
jumping to the next inobt record.  This also fixes an off by one error
where upon resume the lookup should have been for the inode /after/ the
point at which we stopped.

Found by fuzzing xfs/460 with keys[2].startino = ones causing bulkstat
and quotacheck to hang.

Fixes: a211432c ("xfs: create simplified inode walk function")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com>

Currently, commit e9e2eae8 dropped a (int) decoration from
XFS_LITINO(mp), and since sizeof() expression is also involved,
the result of XFS_LITINO(mp) is simply as the size_t type
(commonly unsigned long).

Considering the expression in xfs_attr_shortform_bytesfit():
  offset = (XFS_LITINO(mp) - bytes) >> 3;
let "bytes" be (int)340, and
    "XFS_LITINO(mp)" be (unsigned long)336.

on 64-bit platform, the expression is
  offset = ((unsigned long)336 - (int)340) >> 3 =
           (int)(0xfffffffffffffffcUL >> 3) = -1

but on 32-bit platform, the expression is
  offset = ((unsigned long)336 - (int)340) >> 3 =
           (int)(0xfffffffcUL >> 3) = 0x1fffffff
instead.

so offset becomes a large positive number on 32-bit platform, and
cause xfs_attr_shortform_bytesfit() returns maxforkoff rather than 0.

Therefore, one result is
  "ASSERT(new_size <= XFS_IFORK_SIZE(ip, whichfork));"

assertion failure in xfs_idata_realloc(), which was also the root
cause of the original bugreport from Dennis, see:
   https://bugzilla.redhat.com/show_bug.cgi?id=1894177

And it can also be manually triggered with the following commands:
  $ touch a;
  $ setfattr -n user.0 -v "`seq 0 80`" a;
  $ setfattr -n user.1 -v "`seq 0 80`" a

on 32-bit platform.

Fix the case in xfs_attr_shortform_bytesfit() by bailing out
"XFS_LITINO(mp) < bytes" in advance suggested by Eric and a misleading
comment together with this bugfix suggested by Darrick. It seems the
other users of XFS_LITINO(mp) are not impacted.

Fixes: e9e2eae8 ("xfs: only check the superblock version for dinode size calculation")
Cc: <stable@vger.kernel.org> # 5.7+
Reported-and-tested-by: NDennis Gilmore <dgilmore@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NGao Xiang <hsiangkao@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Teach the directory scrubber to check all the bestfree entries,
including the null ones.  We want to be able to detect the case where
the entry is null but there actually /is/ a directory data block.

Found by fuzzing lbests[0] = ones in xfs/391.

Fixes: df481968 ("xfs: scrub directory freespace")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

We always know the correct state of the rmap record flags (attr, bmbt,
unwritten) so check them by direct comparison.

Fixes: d852657c ("xfs: cross-reference reverse-mapping btree")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The comment and logic in xchk_btree_check_minrecs for dealing with
inode-rooted btrees isn't quite correct.  While the direct children of
the inode root are allowed to have fewer records than what would
normally be allowed for a regular ondisk btree block, this is only true
if there is only one child block and the number of records don't fit in
the inode root.

Fixes: 08a3a692 ("xfs: btree scrub should check minrecs")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

We also need to drop the iolock when invalidate_inode_pages2 fails, not
only on all other error or successful cases.

Fixes: 52785112 ("xfs: implement pNFS export operations")
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Fix some serious WTF in the reference count scrubber's rmap fragment
processing.  The code comment says that this loop is supposed to move
all fragment records starting at or before bno onto the worklist, but
there's no obvious reason why nr (the number of items added) should
increment starting from 1, and breaking the loop when we've added the
target number seems dubious since we could have more rmap fragments that
should have been added to the worklist.

This seems to manifest in xfs/411 when adding one to the refcount field.

Fixes: dbde19da ("xfs: cross-reference the rmapbt data with the refcountbt")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Keys for extent interval records in the reverse mapping btree are
supposed to be computed as follows:

(physical block, owner, fork, is_btree, is_unwritten, offset)

This provides users the ability to look up a reverse mapping from a bmbt
record -- start with the physical block; then if there are multiple
records for the same block, move on to the owner; then the inode fork
type; and so on to the file offset.

However, the key comparison functions incorrectly remove the
fork/btree/unwritten information that's encoded in the on-disk offset.
This means that lookup comparisons are only done with:

(physical block, owner, offset)

This means that queries can return incorrect results.  On consistent
filesystems this hasn't been an issue because blocks are never shared
between forks or with bmbt blocks; and are never unwritten.  However,
this bug means that online repair cannot always detect corruption in the
key information in internal rmapbt nodes.

Found by fuzzing keys[1].attrfork = ones on xfs/371.

Fixes: 4b8ed677 ("xfs: add rmap btree operations")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

When the bmbt scrubber is looking up rmap extents, we need to set the
extent flags from the bmbt record fully.  This will matter once we fix
the rmap btree comparison functions to check those flags correctly.

Fixes: d852657c ("xfs: cross-reference reverse-mapping btree")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Pass the same oldext argument (which contains the existing rmapping's
unwritten state) to xfs_rmap_lookup_le_range at the start of
xfs_rmap_convert_shared.  At this point in the code, flags is zero,
which means that we perform lookups using the wrong key.

Fixes: 3f165b33 ("xfs: convert unwritten status of reverse mappings for shared files")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

There's no reason to flush an entire file when we're unsharing part of
a file.  Therefore, only initiate writeback on the selected range.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com>

The kernel has always allowed directories to have the rtinherit flag
set, even if there is no rt device, so this check is wrong.

Fixes: 80e4e126 ("xfs: scrub inodes")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

In commit 7588cbee, we tried to fix a race stemming from the lack of
coordination between higher level code that wants to allocate and remap
CoW fork extents into the data fork.  Christoph cites as examples the
always_cow mode, and a directio write completion racing with writeback.

According to the comments before the goto retry, we want to restart the
lookup to catch the extent in the data fork, but we don't actually reset
whichfork or cow_fsb, which means the second try executes using stale
information.  Up until now I think we've gotten lucky that either
there's something left in the CoW fork to cause cow_fsb to be reset, or
either data/cow fork sequence numbers have advanced enough to force a
fresh lookup from the data fork.  However, if we reach the retry with an
empty stable CoW fork and a stable data fork, neither of those things
happens.  The retry foolishly re-calls xfs_convert_blocks on the CoW
fork which fails again.  This time, we toss the write.

I've recently been working on extending reflink to the realtime device.
When the realtime extent size is larger than a single block, we have to
force the page cache to CoW the entire rt extent if a write (or
fallocate) are not aligned with the rt extent size.  The strategy I've
chosen to deal with this is derived from Dave's blocksize > pagesize
series: dirtying around the write range, and ensuring that writeback
always starts mapping on an rt extent boundary.  This has brought this
race front and center, since generic/522 blows up immediately.

However, I'm pretty sure this is a bug outright, independent of that.

Fixes: 7588cbee ("xfs: retry COW fork delalloc conversion when no extent was found")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The iomap writepage error handling logic is a mash of old and
slightly broken XFS writepage logic. When keepwrite writeback state
tracking was introduced in XFS in commit 0d085a52 ("xfs: ensure
WB_SYNC_ALL writeback handles partial pages correctly"), XFS had an
additional cluster writeback context that scanned ahead of
->writepage() to process dirty pages over the current ->writepage()
extent mapping. This context expected a dirty page and required
retention of the TOWRITE tag on partial page processing so the
higher level writeback context would revisit the page (in contrast
to ->writepage(), which passes a page with the dirty bit already
cleared).

The cluster writeback mechanism was eventually removed and some of
the error handling logic folded into the primary writeback path in
commit 150d5be0 ("xfs: remove xfs_cancel_ioend"). This patch
accidentally conflated the two contexts by using the keepwrite logic
in ->writepage() without accounting for the fact that the page is
not dirty. Further, the keepwrite logic has no practical effect on
the core ->writepage() caller (write_cache_pages()) because it never
revisits a page in the current function invocation.

Technically, the page should be redirtied for the keepwrite logic to
have any effect. Otherwise, write_cache_pages() may find the tagged
page but will skip it since it is clean. Even if the page was
redirtied, however, there is still no practical effect to keepwrite
since write_cache_pages() does not wrap around within a single
invocation of the function. Therefore, the dirty page would simply
end up retagged on the next writeback sequence over the associated
range.

All that being said, none of this really matters because redirtying
a partially processed page introduces a potential infinite redirty
-> writeback failure loop that deviates from the current design
principle of clearing the dirty state on writepage failure to avoid
building up too much dirty, unreclaimable memory on the system.
Therefore, drop the spurious keepwrite usage and dirty state
clearing logic from iomap_writepage_map(), treat the partially
processed page the same as a fully processed page, and let the
imminent ioend failure clean up the writeback state.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

iomap writeback mapping failure only calls into ->discard_page() if
the current page has not been added to the ioend. Accordingly, the
XFS callback assumes a full page discard and invalidation. This is
problematic for sub-page block size filesystems where some portion
of a page might have been mapped successfully before a failure to
map a delalloc block occurs. ->discard_page() is not called in that
error scenario and the bio is explicitly failed by iomap via the
error return from ->prepare_ioend(). As a result, the filesystem
leaks delalloc blocks and corrupts the filesystem block counters.

Since XFS is the only user of ->discard_page(), tweak the semantics
to invoke the callback unconditionally on mapping errors and provide
the file offset that failed to map. Update xfs_discard_page() to
discard the corresponding portion of the file and pass the range
along to iomap_invalidatepage(). The latter already properly handles
both full and sub-page scenarios by not changing any iomap or page
state on sub-page invalidations.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

It is possible to expose non-zeroed post-EOF data in XFS if the new
EOF page is dirty, backed by an unwritten block and the truncate
happens to race with writeback. iomap_truncate_page() will not zero
the post-EOF portion of the page if the underlying block is
unwritten. The subsequent call to truncate_setsize() will, but
doesn't dirty the page. Therefore, if writeback happens to complete
after iomap_truncate_page() (so it still sees the unwritten block)
but before truncate_setsize(), the cached page becomes inconsistent
with the on-disk block. A mapped read after the associated page is
reclaimed or invalidated exposes non-zero post-EOF data.

For example, consider the following sequence when run on a kernel
modified to explicitly flush the new EOF page within the race
window:

$ xfs_io -fc "falloc 0 4k" -c fsync /mnt/file
$ xfs_io -c "pwrite 0 4k" -c "truncate 1k" /mnt/file
  ...
$ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file
00000400:  00 00 00 00 00 00 00 00  ........
$ umount /mnt/; mount <dev> /mnt/
$ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file
00000400:  cd cd cd cd cd cd cd cd  ........

Update xfs_setattr_size() to explicitly flush the new EOF page prior
to the page truncate to ensure iomap has the latest state of the
underlying block.

Fixes: 68a9f5e7 ("xfs: implement iomap based buffered write path")
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Make sure that we actually initialize xefi_discard when we're scheduling
a deferred free of an AGFL block.  This was (eventually) found by the
UBSAN while I was banging on realtime rmap problems, but it exists in
the upstream codebase.  While we're at it, rearrange the structure to
reduce the struct size from 64 to 56 bytes.

Fixes: fcb762f5 ("xfs: add bmapi nodiscard flag")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>

Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.

Remove the quote operator # from compiler_attributes.h __section macro.

Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.

Conversion done using the script at:

    https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: NMiguel Ojeda <ojeda@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

tid_addr is not a "pointer to (pointer to int in userspace)"; it is in
fact a "pointer to (pointer to int in userspace) in userspace".  So
sparse rightfully complains about passing a kernel pointer to
put_user().
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 453431a5 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.

Since then a few more instances of kzfree() have slipped in.

Just get rid of them and remove the compatibility definition
once and for all.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If set, use the environment variable GIT_DIR to change the default .git
location of the kernel git tree.

If GIT_DIR is unset, keep using the current ".git" default.

Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by: NJoe Perches <joe@perches.com>
Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull timer fixes from Thomas Gleixner:
 "A time namespace fix and a matching selftest. The futex absolute
  timeouts which are based on CLOCK_MONOTONIC require time namespace
  corrected. This was missed in the original time namesapce support"

* tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/timens: Add a test for futex()
  futex: Adjust absolute futex timeouts with per time namespace offset

Pull scheduler fixes from Thomas Gleixner:
 "Two scheduler fixes:

   - A trivial build fix for sched_feat() to compile correctly with
     CONFIG_JUMP_LABEL=n

   - Replace a zero lenght array with a flexible array"

* tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/features: Fix !CONFIG_JUMP_LABEL case
  sched: Replace zero-length array with flexible-array

Pull perf fix from Thomas Gleixner:
 "A single fix to compute the field offset of the SNOOPX bit in the data
  source bitmask of perf events correctly"

* tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: correct SNOOPX field offset

Pull locking fix from Thomas Gleixner:
 "Just a trivial fix for kernel-doc warnings"

* tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/seqlocks: Fix kernel-doc warnings

Pull NTB fixes from Jon Mason.

* tag 'ntb-5.10' of git://github.com/jonmason/ntb:
  NTB: Use struct_size() helper in devm_kzalloc()
  ntb: intel: Fix memleak in intel_ntb_pci_probe
  NTB: hw: amd: fix an issue about leak system resources

Pull i2c fix from Wolfram Sang:
 "Regression fix for rc1 and stable kernels as well"

* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs

Pull more cifs updates from Steve French:
 "Add support for stat of various special file types (WSL reparse points
  for char, block, fifo)"

* tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  smb3: add some missing definitions from MS-FSCC
  smb3: remove two unused variables
  smb3: add support for stat of WSL reparse points for special file types

Pull more parisc updates from Helge Deller:

 - During this merge window O_NONBLOCK was changed to become 000200000,
   but we missed that the syscalls timerfd_create(), signalfd4(),
   eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict
   bit-wise check of the flags parameter.

   To provide backward compatibility with existing userspace we
   introduce parisc specific wrappers for those syscalls which filter
   out the old O_NONBLOCK value and replaces it with the new one.

 - Prevent HIL bus driver to get stuck when keyboard or mouse isn't
   attached

 - Improve error return codes when setting rtc time

 - Minor documentation fix in pata_ns87415.c

* 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  ata: pata_ns87415.c: Document support on parisc with superio chip
  parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage
  hil/parisc: Disable HIL driver when it gets stuck
  parisc: Improve error return codes when setting rtc time

Pull more xen updates from Juergen Gross:

 - a series for the Xen pv block drivers adding module parameters for
   better control of resource usge

 - a cleanup series for the Xen event driver

* tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  Documentation: add xen.fifo_events kernel parameter description
  xen/events: unmask a fifo event channel only if it was masked
  xen/events: only register debug interrupt for 2-level events
  xen/events: make struct irq_info private to events_base.c
  xen: remove no longer used functions
  xen-blkfront: Apply changed parameter name to the document
  xen-blkfront: add a parameter for disabling of persistent grants
  xen-blkback: add a parameter for disabling of persistent grants

Pull SafeSetID updates from Micah Morton:
 "The changes are mostly contained to within the SafeSetID LSM, with the
  exception of a few 1-line changes to change some ns_capable() calls to
  ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that
  is examined by SafeSetID code and nothing else in the kernel.

  The changes to SafeSetID internally allow for setting up GID
  transition security policies, as already existed for UIDs"

* tag 'safesetid-5.10' of git://github.com/micah-morton/linux:
  LSM: SafeSetID: Fix warnings reported by test bot
  LSM: SafeSetID: Add GID security policy handling
  LSM: Signal to SafeSetID when setting group IDs

Pull random32 updates from Willy Tarreau:
 "Make prandom_u32() less predictable.

  This is the cleanup of the latest series of prandom_u32
  experimentations consisting in using SipHash instead of Tausworthe to
  produce the randoms used by the network stack.

  The changes to the files were kept minimal, and the controversial
  commit that used to take noise from the fast_pool (f227e3ec) was
  reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is
  fed from various sources of activities (networking, scheduling) to
  perturb the SipHash state using fast, non-trivially predictable data,
  instead of keeping it fully deterministic. The goal is essentially to
  make any occasional memory leakage or brute-force attempt useless.

  The resulting code was verified to be very slightly faster on x86_64
  than what is was with the controversial commit above, though this
  remains barely above measurement noise. It was also tested on i386 and
  arm, and build- tested only on arm64"

Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/

* tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom:
  random32: add a selftest for the prandom32 code
  random32: add noise from network and scheduling activity
  random32: make prandom_u32() output unpredictable

Commit 21653a41 ("i2c: core: Call i2c_acpi_install_space_handler()
before i2c_acpi_register_devices()")'s intention was to only move the
acpi_install_address_space_handler() call to the point before where
the ACPI declared i2c-children of the adapter where instantiated by
i2c_acpi_register_devices().

But i2c_acpi_install_space_handler() had a call to
acpi_walk_dep_device_list() hidden (that is I missed it) at the end
of it, so as an unwanted side-effect now acpi_walk_dep_device_list()
was also being called before i2c_acpi_register_devices().

Move the acpi_walk_dep_device_list() call to the end of
i2c_acpi_register_devices(), so that it is once again called *after*
the i2c_client-s hanging of the adapter have been created.

This fixes the Microsoft Surface Go 2 hanging at boot.

Fixes: 21653a41 ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627Reported-by: NRainer Finke <rainer@finke.cc>
Reported-by: NKieran Bingham <kieran.bingham@ideasonboard.com>
Suggested-by: NMaximilian Luz <luzmaximilian@gmail.com>
Tested-by: NKieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph
     - rdma error handling fixes (Chao Leng)
     - fc error handling and reconnect fixes (James Smart)
     - fix the qid displace when tracing ioctl command (Keith Busch)
     - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
     - fix MTDT for passthru (Logan Gunthorpe)
     - blacklist Write Same on more devices (Kai-Heng Feng)
     - fix an uninitialized work struct (zhenwei pi)"

 - lightnvm out-of-bounds fix (Colin)

 - SG allocation leak fix (Doug)

 - rnbd fixes (Gioh, Guoqing, Jack)

 - zone error translation fixes (Keith)

 - kerneldoc markup fix (Mauro)

 - zram lockdep fix (Peter)

 - Kill unused io_context members (Yufen)

 - NUMA memory allocation cleanup (Xianting)

 - NBD config wakeup fix (Xiubo)

* tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits)
  block: blk-mq: fix a kernel-doc markup
  nvme-fc: shorten reconnect delay if possible for FC
  nvme-fc: wait for queues to freeze before calling update_hr_hw_queues
  nvme-fc: fix error loop in create_hw_io_queues
  nvme-fc: fix io timeout to abort I/O
  null_blk: use zone status for max active/open
  nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru
  nvmet: cleanup nvmet_passthru_map_sg()
  nvmet: limit passthru MTDS by BIO_MAX_PAGES
  nvmet: fix uninitialized work for zero kato
  nvme-pci: disable Write Zeroes on Sandisk Skyhawk
  nvme: use queuedata for nvme_req_qid
  nvme-rdma: fix crash due to incorrect cqe
  nvme-rdma: fix crash when connect rejected
  block: remove unused members for io_context
  blk-mq: remove the calling of local_memory_node()
  zram: Fix __zram_bvec_{read,write}() locking order
  skd_main: remove unused including <linux/version.h>
  sgl_alloc_order: fix memory leak
  lightnvm: fix out-of-bounds write to array devices->info[]
  ...

Pull io_uring fixes from Jens Axboe:

 - fsize was missed in previous unification of work flags

 - Few fixes cleaning up the flags unification creds cases (Pavel)

 - Fix NUMA affinities for completely unplugged/replugged node for io-wq

 - Two fallout fixes from the set_fs changes. One local to io_uring, one
   for the splice entry point that io_uring uses.

 - Linked timeout fixes (Pavel)

 - Removal of ->flush() ->files work-around that we don't need anymore
   with referenced files (Pavel)

 - Various cleanups (Pavel)

* tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block:
  splice: change exported internal do_splice() helper to take kernel offset
  io_uring: make loop_rw_iter() use original user supplied pointers
  io_uring: remove req cancel in ->flush()
  io-wq: re-set NUMA node affinities if CPUs come online
  io_uring: don't reuse linked_timeout
  io_uring: unify fsize with def->work_flags
  io_uring: fix racy REQ_F_LINK_TIMEOUT clearing
  io_uring: do poll's hash_node init in common code
  io_uring: inline io_poll_task_handler()
  io_uring: remove extra ->file check in poll prep
  io_uring: make cached_cq_overflow non atomic_t
  io_uring: inline io_fail_links()
  io_uring: kill ref get/drop in personality init
  io_uring: flags-based creds init in queue

Pull libata fixes from Jens Axboe:
 "Two minor libata fixes:

   - Fix a DMA boundary mask regression for sata_rcar (Geert)

   - kerneldoc markup fix (Mauro)"

* tag 'libata-5.10-2020-10-24' of git://git.kernel.dk/linux-block:
  ata: fix some kernel-doc markups
  ata: sata_rcar: Fix DMA boundary mask