1. 23 6月, 2006 2 次提交
    • D
      [PATCH] VFS: Permit filesystem to perform statfs with a known root dentry · 726c3342
      David Howells 提交于
      Give the statfs superblock operation a dentry pointer rather than a superblock
      pointer.
      
      This complements the get_sb() patch.  That reduced the significance of
      sb->s_root, allowing NFS to place a fake root there.  However, NFS does
      require a dentry to use as a target for the statfs operation.  This permits
      the root in the vfsmount to be used instead.
      
      linux/mount.h has been added where necessary to make allyesconfig build
      successfully.
      
      Interest has also been expressed for use with the FUSE and XFS filesystems.
      Signed-off-by: NDavid Howells <dhowells@redhat.com>
      Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
      Cc: Nathan Scott <nathans@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      726c3342
    • D
      [PATCH] VFS: Permit filesystem to override root dentry on mount · 454e2398
      David Howells 提交于
      Extend the get_sb() filesystem operation to take an extra argument that
      permits the VFS to pass in the target vfsmount that defines the mountpoint.
      
      The filesystem is then required to manually set the superblock and root dentry
      pointers.  For most filesystems, this should be done with simple_set_mnt()
      which will set the superblock pointer and then set the root dentry to the
      superblock's s_root (as per the old default behaviour).
      
      The get_sb() op now returns an integer as there's now no need to return the
      superblock pointer.
      
      This patch permits a superblock to be implicitly shared amongst several mount
      points, such as can be done with NFS to avoid potential inode aliasing.  In
      such a case, simple_set_mnt() would not be called, and instead the mnt_root
      and mnt_sb would be set directly.
      
      The patch also makes the following changes:
      
       (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
           pointer argument and return an integer, so most filesystems have to change
           very little.
      
       (*) If one of the convenience function is not used, then get_sb() should
           normally call simple_set_mnt() to instantiate the vfsmount. This will
           always return 0, and so can be tail-called from get_sb().
      
       (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
           dcache upon superblock destruction rather than shrink_dcache_anon().
      
           This is required because the superblock may now have multiple trees that
           aren't actually bound to s_root, but that still need to be cleaned up. The
           currently called functions assume that the whole tree is rooted at s_root,
           and that anonymous dentries are not the roots of trees which results in
           dentries being left unculled.
      
           However, with the way NFS superblock sharing are currently set to be
           implemented, these assumptions are violated: the root of the filesystem is
           simply a dummy dentry and inode (the real inode for '/' may well be
           inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
           with child trees.
      
           [*] Anonymous until discovered from another tree.
      
       (*) The documentation has been adjusted, including the additional bit of
           changing ext2_* into foo_* in the documentation.
      
      [akpm@osdl.org: convert ipath_fs, do other stuff]
      Signed-off-by: NDavid Howells <dhowells@redhat.com>
      Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
      Cc: Nathan Scott <nathans@sgi.com>
      Cc: Roland Dreier <rolandd@cisco.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      454e2398
  2. 29 3月, 2006 1 次提交
  3. 22 3月, 2006 2 次提交
    • C
      [PATCH] convert hugetlbfs_counter to atomic · bba1e9b2
      Chen, Kenneth W 提交于
      Implementation of hugetlbfs_counter() is functionally equivalent to
      atomic_inc_return().  Use the simpler atomic form.
      Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
      Cc: David Gibson <david@gibson.dropbear.id.au>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      bba1e9b2
    • D
      [PATCH] hugepage: Strict page reservation for hugepage inodes · b45b5bd6
      David Gibson 提交于
      These days, hugepages are demand-allocated at first fault time.  There's a
      somewhat dubious (and racy) heuristic when making a new mmap() to check if
      there are enough available hugepages to fully satisfy that mapping.
      
      A particularly obvious case where the heuristic breaks down is where a
      process maps its hugepages not as a single chunk, but as a bunch of
      individually mmap()ed (or shmat()ed) blocks without touching and
      instantiating the pages in between allocations.  In this case the size of
      each block is compared against the total number of available hugepages.
      It's thus easy for the process to become overcommitted, because each block
      mapping will succeed, although the total number of hugepages required by
      all blocks exceeds the number available.  In particular, this defeats such
      a program which will detect a mapping failure and adjust its hugepage usage
      downward accordingly.
      
      The patch below addresses this problem, by strictly reserving a number of
      physical hugepages for hugepage inodes which have been mapped, but not
      instatiated.  MAP_SHARED mappings are thus "safe" - they will fail on
      mmap(), not later with an OOM SIGKILL.  MAP_PRIVATE mappings can still
      trigger an OOM.  (Actually SHARED mappings can technically still OOM, but
      only if the sysadmin explicitly reduces the hugepage pool between mapping
      and instantiation)
      
      This patch appears to address the problem at hand - it allows DB2 to start
      correctly, for instance, which previously suffered the failure described
      above.
      
      This patch causes no regressions on the libhugetblfs testsuite, and makes a
      test (designed to catch this problem) pass which previously failed (ppc64,
      POWER5).
      Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
      Cc: William Lee Irwin III <wli@holomorphy.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      b45b5bd6
  4. 02 2月, 2006 1 次提交
  5. 15 1月, 2006 1 次提交
    • R
      [PATCH] Add tmpfs options for memory placement policies · 7339ff83
      Robin Holt 提交于
      Anything that writes into a tmpfs filesystem is liable to disproportionately
      decrease the available memory on a particular node.  Since there's no telling
      what sort of application (e.g.  dd/cp/cat) might be dropping large files
      there, this lets the admin choose the appropriate default behavior for their
      site's situation.
      
      Introduce a tmpfs mount option which allows specifying a memory policy and
      a second option to specify the nodelist for that policy.  With the default
      policy, tmpfs will behave as it does today.  This patch adds support for
      preferred, bind, and interleave policies.
      
      The default policy will cause pages to be added to tmpfs files on the node
      which is doing the writing.  Some jobs expect a single process to create
      and manage the tmpfs files.  This results in a node which has a
      significantly reduced number of free pages.
      
      With this patch, the administrator can specify the policy and nodes for
      that policy where they would prefer allocations.
      
      This patch was originally written by Brent Casavant and Hugh Dickins.  I
      added support for the bind and preferred policies and the mpol_nodelist
      mount option.
      Signed-off-by: NBrent Casavant <bcasavan@sgi.com>
      Signed-off-by: NHugh Dickins <hugh@veritas.com>
      Signed-off-by: NRobin Holt <holt@sgi.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      7339ff83
  6. 12 1月, 2006 1 次提交
  7. 10 1月, 2006 1 次提交
  8. 07 1月, 2006 1 次提交
    • D
      [PATCH] Hugetlb: Copy on Write support · 1e8f889b
      David Gibson 提交于
      Implement copy-on-write support for hugetlb mappings so MAP_PRIVATE can be
      supported.  This helps us to safely use hugetlb pages in many more
      applications.  The patch makes the following changes.  If needed, I also have
      it broken out according to the following paragraphs.
      
      1. Add a pair of functions to set/clear write access on huge ptes.  The
         writable check in make_huge_pte is moved out to the caller for use by COW
         later.
      
      2. Hugetlb copy-on-write requires special case handling in the following
         situations:
      
         - copy_hugetlb_page_range() - Copied pages must be write protected so
           a COW fault will be triggered (if necessary) if those pages are written
           to.
      
         - find_or_alloc_huge_page() - Only MAP_SHARED pages are added to the
           page cache.  MAP_PRIVATE pages still need to be locked however.
      
      3. Provide hugetlb_cow() and calls from hugetlb_fault() and
         hugetlb_no_page() which handles the COW fault by making the actual copy.
      
      4. Remove the check in hugetlbfs_file_map() so that MAP_PRIVATE mmaps
         will be allowed.  Make MAP_HUGETLB exempt from the depricated VM_RESERVED
         mapping check.
      Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
      Signed-off-by: NAdam Litke <agl@us.ibm.com>
      Cc: William Lee Irwin III <wli@holomorphy.com>
      Cc: "Seth, Rohit" <rohit.seth@intel.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      1e8f889b
  9. 23 11月, 2005 1 次提交
    • D
      [PATCH] Fix hugetlbfs_statfs() reporting of block limits · 74a8a65c
      David Gibson 提交于
      Currently, if a hugetlbfs is mounted without limits (the default), statfs()
      will return -1 for max/free/used blocks.  This does not appear to be in
      line with normal convention: simple_statfs() and shmem_statfs() both return
      0 in similar cases.  Worse, it confuses the translation logic in
      put_compat_statfs(), causing it to return -EOVERFLOW on such a mount.
      
      This patch alters hugetlbfs_statfs() to return 0 for max/free/used blocks
      on a mount without limits.  Note that we need the test in the patch below,
      rather than just using 0 in the sbinfo structure, because the -1 marked in
      the free blocks field is used internally to tell the
      Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      74a8a65c
  10. 09 11月, 2005 1 次提交
  11. 30 10月, 2005 7 次提交
  12. 22 6月, 2005 1 次提交
    • W
      [PATCH] Avoiding mmap fragmentation · 1363c3cd
      Wolfgang Wander 提交于
      Ingo recently introduced a great speedup for allocating new mmaps using the
      free_area_cache pointer which boosts the specweb SSL benchmark by 4-5% and
      causes huge performance increases in thread creation.
      
      The downside of this patch is that it does lead to fragmentation in the
      mmap-ed areas (visible via /proc/self/maps), such that some applications
      that work fine under 2.4 kernels quickly run out of memory on any 2.6
      kernel.
      
      The problem is twofold:
      
        1) the free_area_cache is used to continue a search for memory where
           the last search ended.  Before the change new areas were always
           searched from the base address on.
      
           So now new small areas are cluttering holes of all sizes
           throughout the whole mmap-able region whereas before small holes
           tended to close holes near the base leaving holes far from the base
           large and available for larger requests.
      
        2) the free_area_cache also is set to the location of the last
           munmap-ed area so in scenarios where we allocate e.g.  five regions of
           1K each, then free regions 4 2 3 in this order the next request for 1K
           will be placed in the position of the old region 3, whereas before we
           appended it to the still active region 1, placing it at the location
           of the old region 2.  Before we had 1 free region of 2K, now we only
           get two free regions of 1K -> fragmentation.
      
      The patch addresses thes issues by introducing yet another cache descriptor
      cached_hole_size that contains the largest known hole size below the
      current free_area_cache.  If a new request comes in the size is compared
      against the cached_hole_size and if the request can be filled with a hole
      below free_area_cache the search is started from the base instead.
      
      The results look promising: Whereas 2.6.12-rc4 fragments quickly and my
      (earlier posted) leakme.c test program terminates after 50000+ iterations
      with 96 distinct and fragmented maps in /proc/self/maps it performs nicely
      (as expected) with thread creation, Ingo's test_str02 with 20000 threads
      requires 0.7s system time.
      
      Taking out Ingo's patch (un-patch available per request) by basically
      deleting all mentions of free_area_cache from the kernel and starting the
      search for new memory always at the respective bases we observe: leakme
      terminates successfully with 11 distinctive hardly fragmented areas in
      /proc/self/maps but thread creating is gringdingly slow: 30+s(!) system
      time for Ingo's test_str02 with 20000 threads.
      
      Now - drumroll ;-) the appended patch works fine with leakme: it ends with
      only 7 distinct areas in /proc/self/maps and also thread creation seems
      sufficiently fast with 0.71s for 20000 threads.
      Signed-off-by: NWolfgang Wander <wwc@rentec.com>
      Credit-to: "Richard Purdie" <rpurdie@rpsys.net>
      Signed-off-by: NKen Chen <kenneth.w.chen@intel.com>
      Acked-by: Ingo Molnar <mingo@elte.hu> (partly)
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      1363c3cd
  13. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      Linus Torvalds 提交于
      Initial git repository build. I'm not bothering with the full history,
      even though we have it. We can create a separate "historical" git
      archive of that later if we want to, and in the meantime it's about
      3.2GB when imported into git - space that would just make the early
      git days unnecessarily complicated, when we don't have a lot of good
      infrastructure for it.
      
      Let it rip!
      1da177e4