bd_prepare_to_claim() incorrectly allowed multiple attempts for
exclusive open to progress in parallel if the attempting holders are
identical.  This triggered BUG_ON() as reported in the following bug.

  https://bugzilla.kernel.org/show_bug.cgi?id=16393

__bd_abort_claiming() is used to finish claiming blocks and doesn't
work if multiple openers are inside a claiming block.  Allowing
multiple parallel open attempts to continue doesn't gain anything as
those are serialized down in the call chain anyway.  Fix it by always
allowing only single open attempt in a claiming block.

This problem can easily be reproduced by adding a delay after
bd_prepare_to_claim() and attempting to mount two partitions of a
disk.

stable: only applicable to v2.6.35
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The firmware handles '\t' internally, so stop trying to emulate it
(which, incidentally, had a bug in it.)

Fixes a really weird hang at bootup in rcu_bootup_announce, which,
as far as I can tell, is the first printk in the core kernel to use
a tab as the first character.

Cc: stable@kernel.org
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Runtime: Add runtime PM statistics (v3)
  PM / Runtime: Make runtime_status attribute not debug-only (v. 2)
  PM: Do not use dynamically allocated objects in pm_wakeup_event()
  PM / Suspend: Fix ordering of calls in suspend error paths
  PM / Hibernate: Fix snapshot error code path
  PM / Hibernate: Fix hibernation_platform_enter()
  pm_qos: Get rid of the allocation in pm_qos_add_request()
  pm_qos: Reimplement using plists
  plist: Add plist_last
  PM: Make it possible to avoid races between wakeup and system sleep
  PNPACPI: Add support for remote wakeup
  PM: describe kernel policy regarding wakeup defaults (v. 2)
  PM / Hibernate: Fix typos in comments in kernel/power/swap.c

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Remove pointless printk from p4-clockmod.
  [CPUFREQ] Fix section mismatch for powernow_cpu_init in powernow-k7.c
  [CPUFREQ] Fix section mismatch for longhaul_cpu_init.
  [CPUFREQ] Fix section mismatch for longrun_cpu_init.
  [CPUFREQ] powernow-k8: Fix misleading variable naming
  [CPUFREQ] Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
  [CPUFREQ] arch/x86/kernel/cpu/cpufreq: use for_each_pci_dev()
  [CPUFREQ] fix brace coding style issue.
  [CPUFREQ] x86 cpufreq: Make trace_power_frequency cpufreq driver independent
  [CPUFREQ] acpi-cpufreq: Fix CPU_ANY CPUFREQ_{PRE,POST}CHANGE notification
  [CPUFREQ] ondemand: don't synchronize sample rate unless multiple cpus present
  [CPUFREQ] unexport (un)lock_policy_rwsem* functions
  [CPUFREQ] ondemand: Refactor frequency increase code
  [CPUFREQ] powernow-k8: On load failure, remind the user to enable support in BIOS setup
  [CPUFREQ] powernow-k8: Limit Pstate transition latency check
  [CPUFREQ] Fix PCC driver error path
  [CPUFREQ] fix double freeing in error path of pcc-cpufreq
  [CPUFREQ] pcc driver should check for pcch method before calling _OSC
  [CPUFREQ] fix memory leak in cpufreq_add_dev
  [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)"

Manually fix up non-data merge conflict introduced by new calling
conventions for trace_power_start() in commit 6f4f2723 ("x86
cpufreq: Make trace_power_frequency cpufreq driver independent"), which
didn't update the intel_idle native hardware cpuidle driver.

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (88 commits)
  ips driver: make it less chatty
  intel_scu_ipc: fix size field for intel_scu_ipc_command
  intel_scu_ipc: return -EIO for error condition in busy_loop
  intel_scu_ipc: fix data packing of PMIC command on Moorestown
  Clean up command packing on MRST.
  zero the stack buffer before giving random garbage to the SCU
  Fix stack buffer size for IPC writev messages
  intel_scu_ipc: Use the new cpu identification function
  intel_scu_ipc: tidy up unused bits
  Remove indirect read write api support.
  intel_scu_ipc: Support Medfield processors
  intel_scu_ipc: detect CPU type automatically
  x86 plat: limit x86 platform driver menu to X86
  acpi ec_sys: Be more cautious about ec write access
  acpi ec: Fix possible double io port registration
  hp-wmi: acpi_drivers.h is already included through acpi.h two lines below
  hp-wmi: Fix mixing up of and/or directive
  dell-laptop: make dell_laptop_i8042_filter() static
  asus-laptop: fix asus_input_init error path
  msi-wmi: make needlessly global symbols static
  ...

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (198 commits)
  KVM: VMX: Fix host GDT.LIMIT corruption
  KVM: MMU: using __xchg_spte more smarter
  KVM: MMU: cleanup spte set and accssed/dirty tracking
  KVM: MMU: don't atomicly set spte if it's not present
  KVM: MMU: fix page dirty tracking lost while sync page
  KVM: MMU: fix broken page accessed tracking with ept enabled
  KVM: MMU: add missing reserved bits check in speculative path
  KVM: MMU: fix mmu notifier invalidate handler for huge spte
  KVM: x86 emulator: fix xchg instruction emulation
  KVM: x86: Call mask notifiers from pic
  KVM: x86: never re-execute instruction with enabled tdp
  KVM: Document KVM_GET_SUPPORTED_CPUID2 ioctl
  KVM: x86: emulator: inc/dec can have lock prefix
  KVM: MMU: Eliminate redundant temporaries in FNAME(fetch)
  KVM: MMU: Validate all gptes during fetch, not just those used for new pages
  KVM: MMU: Simplify spte fetch() function
  KVM: MMU: Add gpte_valid() helper
  KVM: MMU: Add validate_direct_spte() helper
  KVM: MMU: Add drop_large_spte() helper
  KVM: MMU: Use __set_spte to link shadow pages
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add()
  Input: cy8ctmg110 - capacitive touchscreen support
  Input: keyboard - also match braille-only keyboards
  Input: adp5588-keys - export unused GPIO pins
  Input: xpad - add product ID for Hori Fighting Stick EX2
  Input: adxl34x - fix leak and use after free
  Input: samsung-keypad - Add samsung keypad driver
  Input: i8042 - reset keyboard controller wehen resuming from S2R
  Input: synaptics - set min/max for finger width
  Input: synaptics - only report width on hardware that supports it
  Input: evdev - signal that device is writable in evdev_poll()
  Input: mousedev - signal that device is writable in mousedev_poll()
  Input: change input handlers to use bool when possible
  Input: document the MT event slot protocol
  Input: introduce MT event slots
  Input: usbtouchscreen - implement reset_resume
  Input: usbtouchscreen - implement runtime power management
  Input: usbtouchscreen - implement basic suspend/resume
  Input: Add ATMEL QT602240 touchscreen driver
  Input: fix signedness warning in input_set_keycode()
  ...

* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (243 commits)
  V4L/DVB: sms: Convert IR support to use the Remote Controller core
  V4L/DVB: sms: properly initialize IR phys and IR name
  V4L/DVB: standardize names at rc-dib0700 tables
  V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStick
  V4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5
  V4L/DVB: dib0700: properly implement IR change_protocol
  V4L/DVB: dib0700: break keytable into NEC and RC-5 variants
  V4L/DVB: dib0700: avoid bad repeat
  V4L/DVB: Port dib0700 to rc-core
  V4L/DVB: Add a keymap file with dib0700 table
  V4L/DVB: dvb-usb: add support for rc-core mode
  V4L/DVB: dvb-usb: prepare drivers for using rc-core
  V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_key
  V4L/DVB: rj54n1cb0c: fix a comment in the driver
  V4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution too
  V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2
  V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms
  V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notifications
  V4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formats
  V4L/DVB: mediabus: fix ambiguous pixel code names
  ...

Merge branch 'stable/swiotlb-0.8.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6

* 'stable/swiotlb-0.8.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6:
  swiotlb: Make swiotlb bookkeeping functions visible in the header file.
  swiotlb: search and replace "int dir" with "enum dma_data_direction dir"
  swiotlb: Make internal bookkeeping functions have 'swiotlb_tbl' prefix.
  swiotlb: add the swiotlb initialization function with iotlb memory
  swiotlb: add swiotlb_tbl_map_single library function

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (90 commits)
  AppArmor: fix build warnings for non-const use of get_task_cred
  selinux: convert the policy type_attr_map to flex_array
  AppArmor: Enable configuring and building of the AppArmor security module
  TOMOYO: Use pathname specified by policy rather than execve()
  AppArmor: update path_truncate method to latest version
  AppArmor: core policy routines
  AppArmor: policy routines for loading and unpacking policy
  AppArmor: mediation of non file objects
  AppArmor: LSM interface, and security module initialization
  AppArmor: Enable configuring and building of the AppArmor security module
  AppArmor: update Maintainer and Documentation
  AppArmor: functions for domain transitions
  AppArmor: file enforcement routines
  AppArmor: userspace interfaces
  AppArmor: dfa match engine
  AppArmor: contexts used in attaching policy to system objects
  AppArmor: basic auditing infrastructure.
  AppArmor: misc. base functions and defines
  TOMOYO: Update version to 2.3.0
  TOMOYO: Fix quota check.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: Fix recovery stuck bug (try #2)
  GFS2: Fix typo in stuffed file data copy handling
  Revert "GFS2: recovery stuck on transaction lock"
  GFS2: Make "try" lock not try quite so hard
  GFS2: remove dependency on __GFP_NOFAIL
  GFS2: Simplify gfs2_write_alloc_required
  GFS2: Wait for journal id on mount if not specified on mount command line
  GFS2: Use nobh_writepage

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: do not warn unnecessarily
  UBI: do not print message about corruptes PEBs if we have none of them
  UBI: improve delete-compatible volumes handling
  UBI: fix error message and compilation warnings
  UBI: generate random image_seq when formatting MTD devices
  UBI: improve ECC error message
  UBI: improve corrupted flash handling
  UBI: introduce eraseblock counter variables
  UBI: introduce a new IO return code
  UBI: simplify IO error codes

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix a memory leak on error path.
  UBIFS: fix GC LEB recovery
  UBIFS: use ERR_CAST
  UBIFS: check return code

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (22 commits)
  9p: fix sparse warnings in new xattr code
  fs/9p: remove sparse warning in vfs_inode
  fs/9p: destroy fid on failed remove
  fs/9p: Prevent parallel rename when doing fid_lookup
  fs/9p: Add support user. xattr
  net/9p: Implement TXATTRCREATE 9p call
  net/9p: Implement attrwalk 9p call
  9p: Implement LOPEN
  fs/9p: This patch implements TLCREATE for 9p2000.L protocol.
  9p: Implement TMKDIR
  9p: Implement TMKNOD
  9p: Define and implement TSYMLINK for 9P2000.L
  9p: Define and implement TLINK for 9P2000.L
  9p: Define and implement TLINK for 9P2000.L
  9p: Implement client side of setattr for 9P2000.L protocol.
  9p: getattr client implementation for 9P2000.L protocol.
  fs/9p: Pass the correct user credentials during attach
  net/9p: Handle the server returned error properly
  9p: readdir implementation for 9p2000.L
  9p: Make use of iounit for read/write
  ...

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (49 commits)
  xfs simplify and speed up direct I/O completions
  xfs: move aio completion after unwritten extent conversion
  direct-io: move aio_complete into ->end_io
  xfs: fix big endian build
  xfs: clean up xfs_bmap_get_bp
  xfs: simplify xfs_truncate_file
  xfs: kill the b_strat callback in xfs_buf
  xfs: remove obsolete osyncisosync mount option
  xfs: clean up filestreams helpers
  xfs: fix gcc 4.6 set but not read and unused statement warnings
  xfs: Fix build when CONFIG_XFS_POSIX_ACL=n
  xfs: fix unsigned underflow in xfs_free_eofblocks
  xfs: use GFP_NOFS for page cache allocation
  xfs: fix memory reclaim recursion deadlock on locked inode buffer
  xfs: fix xfs_trans_add_item() lockdep warnings
  xfs: simplify and remove xfs_ireclaim
  xfs: don't block on buffer read errors
  xfs: move inode shrinker unregister even earlier
  xfs: remove a dmapi leftover
  xfs: writepage always has buffers
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (29 commits)
  cifs: fsc should not default to "on"
  [CIFS] remove redundant path walking in dfs_do_refmount
  cifs: ignore the "mand", "nomand" and "_netdev" mount options
  cifs: map NT_STATUS_ERROR_WRITE_PROTECTED to -EROFS
  cifs: don't allow cifs_iget to match inodes of the wrong type
  [CIFS] relinquish fscache cookie before freeing CIFSTconInfo
  cifs: add separate cred_uid field to sesInfo
  fs: cifs: check kmalloc() result
  [CIFS] Missing ifdef
  [CIFS] Missing line from previous commit
  [CIFS] Fix build break when CONFIG_CIFS_FSCACHE disabled
  cifs: add mount option to enable local caching
  cifs: read pages from FS-Cache
  cifs: store pages into local cache
  cifs: FS-Cache page management
  cifs: define inode-level cache object and register them
  cifs: define superblock-level cache index objects and register them
  cifs: remove unused cifsUidInfo struct
  cifs: clean up cifs_find_smb_ses (try #2)
  cifs: match secType when searching for existing tcp session
  ...

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits)
  ARM: AMBA: Add pclk support to AMBA bus infrastructure
  ARM: 6278/2: fix regression in RealView after the introduction of pclk
  ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128
  ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
  ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
  ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
  ARM: 6244/1: mmci: add variant data and default MCICLOCK support
  ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
  ARM: 6274/1: add global control registers definition header file for nuc900
  mx2_camera: fix type of dma buffer virtual address pointer
  mx2_camera: Add soc_camera support for i.MX25/i.MX27
  arm/imx/gpio: add spinlock protection
  ARM: Add support for the LPC32XX arch
  ARM: LPC32XX: Arch config menu supoport and makefiles
  ARM: LPC32XX: Phytec 3250 platform support
  ARM: LPC32XX: Misc support functions
  ARM: LPC32XX: Serial support code
  ARM: LPC32XX: System suspend support
  ARM: LPC32XX: GPIO, timer, and IRQ drivers
  ARM: LPC32XX: Clock driver
  ...

The only machines this is triggering on should be supported by
acpi-cpufreq or acpi's internal throttling.
Signed-off-by: NDave Jones <davej@redhat.com>

Use __cpuinit instead of __init for the cpufreq_driver
init function like it is done in powernow-k8.c.

This is removing the warning generated when compiling with
the CONFIG_DEBUG_SECTION_MISMATCH=y option.
Signed-off-by: NHolger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Use __cpuinit instead of __init for the cpufreq_driver
init function like it is done in powernow-k8.c. Use the
__cpuinitdata for data used by the routines marked as __cpuinit.

This is removing the warning generated when compiling with
the CONFIG_DEBUG_SECTION_MISMATCH=y option.
Signed-off-by: NHolger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Use __cpuinit instead of __init for the cpufreq_driver
init function like it is done in powernow-k8.c.

This is removing the warning generated when compiling with
the CONFIG_DEBUG_SECTION_MISMATCH=y option.
Signed-off-by: NHolger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: NDave Jones <davej@redhat.com>

rdmsr() takes the lower 32 bits as a second argument and the high 32 as
a third. Fix the names accordingly since they were swapped.

There should be no functionality change resulting from this patch.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NDave Jones <davej@redhat.com>

This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NDave Jones <davej@redhat.com>

Use for_each_pci_dev() to simplify the code.
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NDave Jones <davej@redhat.com>

This patch fixes up a brace warning found by the checkpatch.pl tool
Signed-off-by: NNeal Buckendahl <nealb001@tbcnet.com>
Signed-off-by: NDave Jones <davej@redhat.com>

and fix the broken case if a core's frequency depends on others.

trace_power_frequency was only implemented in a rather ungeneric way
in acpi-cpufreq driver's target() function only.
-> Move the call to trace_power_frequency to
   cpufreq.c:cpufreq_notify_transition() where CPUFREQ_POSTCHANGE
   notifier is triggered.
   This will support power frequency tracing by all cpufreq drivers

trace_power_frequency did not trace frequency changes correctly when
the userspace governor was used or when CPU cores' frequency depend
on each other.
-> Moving this into the CPUFREQ_POSTCHANGE notifier and pass the cpu
   which gets switched automatically fixes this.

Robert Schoene provided some important fixes on top of my initial
quick shot version which are integrated in this patch:
- Forgot some changes in power_end trace (TP_printk/variable names)
- Variable dummy in power_end must now be cpu_id
- Use static 64 bit variable instead of unsigned int for cpu_id
Signed-off-by: NThomas Renninger <trenn@suse.de>
CC: davej@redhat.com
CC: arjan@infradead.org
CC: linux-kernel@vger.kernel.org
CC: robert.schoene@tu-dresden.de
Tested-by: robert.schoene@tu-dresden.de
Signed-off-by: NDave Jones <davej@redhat.com>

Signed-off-by: NThomas Renninger <trenn@suse.de>
CC: venki@google.com
CC: davej@redhat.com
CC: arjan@infradead.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: NDave Jones <davej@redhat.com>

For UP systems this is not required, and results in a more consistent
sample interval.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJocelyn Falempe <jocelyn.falempe@motorola.com>
Signed-off-by: NMike Chan <mike@android.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Jones <davej@redhat.com>

lock_policy_rwsem_* and unlock_policy_rwsem_* functions are scheduled
to be unexported when 2.6.33. Now there are no other callers of them
out of cpufreq.c, unexport them and make them static.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Make simpler to read and call.

*** v3 - Always call when powersave_bias is enabled.
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NMike Chan <mike@android.com>
Signed-off-by: NDave Jones <davej@redhat.com>

On Wed, 2010-01-20 at 16:56 +0100, Thomas Renninger wrote:
> But most often this happens if people upgrade their CPU and do not
> update their BIOS.
> Or the vendor does not recognise the new CPU even if the BIOS got
> updated.

Maybe some of those people just didn't realize it was disabled in BIOS?
If you tell users that it's a firmware bug then they'll probably just
give up.

> The itself message might be an enhancment, IMO it's not worth a patch.

Why do you think so? I spent an hour on hunting down the BIOS upgrade,
only to find that it didn't improve anything. It was a day later that I
realized that it might be a BIOS option; and the option was literally
the _last_ option in the whole BIOS setup. :)

This message would have saved the day.

> But do not revert the FW_BUG part!

Sure, you have a point here.

How about this patch?

The Pstate transition latency check was added for broken F10h BIOSen
which wrongly contain a value of 0 for transition and bus master
latency. Fam11h and later, however, (will) have similar transition
latency so extend that behavior for them too.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NDave Jones <davej@redhat.com>

The PCC cpufreq driver unmaps the mailbox address range if any CPUs fail to
initialise, but doesn't do anything to remove the registered CPUs from the
cpufreq core resulting in failures further down the line. We're better off
simply returning a failure - the cpufreq core will unregister us cleanly if
we end up with no successfully registered CPUs. Tidy up the failure path
and also add a sanity check to ensure that the firmware gives us a realistic
frequency - the core deals badly with that being set to 0.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Prevent double freeing on error path.
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NDave Jones <davej@redhat.com>

The pcc specification documents an _OSC method that's incompatible with the
one defined as part of the ACPI spec. This shouldn't be a problem as both
are supposed to be guarded with a UUID. Unfortunately approximately nobody
(including HP, who wrote this spec) properly check the UUID on entry to the
_OSC call. Right now this could result in surprising behaviour if the pcc
driver performs an _OSC call on a machine that doesn't implement the pcc
specification. Check whether the PCCH method exists first in order to reduce
this probability.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: NDave Jones <davej@redhat.com>

We didn't free policy->related_cpus in error path err_unlock_policy.
This is catched by following kmemleak report:

unreferenced object 0xffff88022a0b96d0 (size 512):
  comm "modprobe", pid 886, jiffies 4294689177 (age 780.694s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff8111ebe5>] create_object+0x186/0x281
    [<ffffffff814fad4f>] kmemleak_alloc+0x60/0xa7
    [<ffffffff8111127a>] kmem_cache_alloc_node_notrace+0x120/0x142
    [<ffffffff81262e4f>] alloc_cpumask_var_node+0x2c/0xd7
    [<ffffffff81262f0b>] alloc_cpumask_var+0x11/0x13
    [<ffffffff81262f1c>] zalloc_cpumask_var+0xf/0x11
    [<ffffffff8140fac0>] cpufreq_add_dev+0x11f/0x547
    [<ffffffff81334bda>] sysdev_driver_register+0xc2/0x11d
    [<ffffffff8140e334>] cpufreq_register_driver+0xcb/0x1b8
    [<ffffffffa032e040>] 0xffffffffa032e040
    [<ffffffff810021ba>] do_one_initcall+0x5e/0x15c
    [<ffffffff81087f94>] sys_init_module+0xa6/0x1e6
    [<ffffffff81009bc2>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NDave Jones <davej@redhat.com>

395913d0 ("[CPUFREQ] remove rwsem lock
from CPUFREQ_GOV_STOP call (second call site)") is not needed, because
there is no rwsem lock in cpufreq_ondemand and cpufreq_conservative
anymore.  Lock should not be released until the work done.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=1594Signed-off-by: NAndrej Gelenberg <andrej.gelenberg@udo.edu>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NDave Jones <davej@redhat.com>

avoid potential stack overflow by correctly checking count parameter
Reported-by: NIlja <ilja@netric.org>
Signed-off-by: NHelge Deller <deller@gmx.de>
Acked-by: NKyle McMartin <kyle@mcmartin.ca>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't need a dev_warn when we exceed a thermal or power limit as
we'll handle it appropriately by clamping down on the CPU, GPU or both
as needed.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Size for PMIC read/write command is byte, while it is DWORD for other
IPC commands.
Signed-off-by: NHong Liu <hong.liu@intel.com>
Signed-off-by: NALan Cox <alan@linux.intel.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>